Questions about the terms and conditions

Similar Questions

• Unable to accept the terms and Conditions

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  I am trying to accept the terms of the Windows Live, but when I press the button "I accept" the "review and accept the agreements I get an error indicating that:

  There is a temporary problem

  There is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.

  I tried different user accounts on the PC and different browsers but get the same error. I can find other people have had a similar problem, but don't see anywhere that he was properly treated. This prevents currently put me parental controls on user accounts for my children.

  Hi Stu has,

  The error message 'it is a temporary problem with the service. Please try again. "If you continue to receive this message, try again later." When accepting the terms and Conditions will occur if the profile that is associated with your account is incomplete. We suggest that you first connect to http://account.live.com and update your profile information. After updating your profile information, sign in to your account and accept the terms and Conditions again. If this problem persists always, reply to this message with the address affected so that we can help you further.

  Thank you

  Gerard G.

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• Accept the terms and Conditions button missing

  I just tried to sign up for a free trial of creative cloud.  I used my exisitng Adobe ID and then I was asked to enter my date of birth... and then the terms and conditions box popped up.  Using Chrome and Firefox 19.0.2 26.0.1410.64 m the box to check and accept button are missing (broken CSS?) on IE 9, the button displays only but I was able to click on it.  I told Adobe customer service, but they said that they could not pass the info and suggested I post here...

  TLyon please see existing discussions on this topic at http://forums.adobe.com/message/5180180#5180180 and http://forums.adobe.com/message/5130319#5130319.  I would recommend adding your experience to the first discussion rather than start a separate discussion.

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• May not accept the terms and conditions, try to

  Hello

  IM trying to update my subscription to an application and I get an error that indicates that I must accept the new terms of Apple and Conditions but brings me to the possibility of accepting these terms and conditions as I normally get.

  I restarted twice now and I'm still not able to do.

  Thanks for the help.

  Have you tried to sing and then again in the app store?

  1. Open app store
  2. Scroll to the bottom of the page
  3. Click sign out
  4. Click on connect

• screen locked on the terms and conditions. Help!

  screen went to the terns and conditions. Now, it won't move off the screen. Do not what anyone, cannot turn off because it blocks the screen access to anything whatsoever

  Have you tried to do a hard reset? (Hold down the sleep/wake button and the "home" button).

• Unable to accept the terms and conditions of the icloud

  My iPhone IS / 10.0.2 IOS does not allow me to accept to iCloud and conditions: therefore, not able to connect to the Apple ID server and cannot connect to Wi - Fi. I have already change network settings - did not help. Erase all content and settings & restored - did not help. Do not connect to a Wi - Fi network didn't happen until I applied IOS 10.02. iCloud question began the week last while on IOS 9.35 - thinking update IOS would be the solution - NOT.

  Try a reset.

  Reset device

  Try a reset.

  Reset - iPhone 7

• Questions about the cost and the best specifications for a new Windows 7 computer

  Hello

  I got most of the things that I should include in the purchase of a new computer.

  Things proposed are the following: Please read and tell me if I need it, and the approximate cost.

  8 GB

  12 GB

  A TB

  VIDEO CARD BUSINESS... I'm QUITE CONFUSED as to IF I NEED. SEE MY QUESTION AT THE END.

  Video card: min. 99 (No. built in chip card (or is it... discreate) dunno... two options different which one.)

  Video card: should be mid to high range; at least at first.  They are beginning to take a long power supply

  supply; and can charge the supply too, so invest in a good to start with.

  Question: Can I add a video card later?  Right now I only use the documents and regular pictures.  Later I want to do

  videos of my pictures; not much more.

  LCD or LED display must be top natch; for Photo Editing/cropping or manipulation?  I do not understand what they

  Let's talk about it.     They speak the monitor?   I DO A LOT OF PHOTO EDITING

  PHOTOSHOP.

  Thank you, Zara3511

  A discreet (dedicated) video card is not necessary. You can always add more later if you need the extra graphics power. Its not harmful if you perform a task such as photos and videos. Benefits is its great for games top of range and can future proof your system. If you are working in Photoshop, certainly invest in the discrete video card. Photoshop she likes it.

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• Question about the design of conditional text

  Posted in the wrong forum, post again here.

  I have a relatively important book (230 pages) with dozens of tables and 100 graphics. I need 4 versions of this book. One for each grade level (3) and the other if happy for all 3 grades is sold as a "master class".  Other than the implementation of conditional text, the book is ready to go. I tried two different ways to approach the tables under certain conditions (some of which are within blocks of text, some just anchored to a page) but I do not quite understand.  Application of conditional text tags (with different colors and markers for each) seems to crash (i.e. almost duplicatable unlike the grave 'normal' down 3-4 I feel daily last month that are just randomly). Sidenote: I was very happy to see that they will solve the crash of book printing...

  Reference markers are involved in these conditional sections, and I have my suspicions that they are guilty of the root of my other problems of crash, but then FM crashed when applying conditional text to a section that * don't * have a x - ref, so I don't know what to think.

  I need to get out Monday. So my question is, if I need 4 tables in one page (one for each version) I better just do 4 copies of the book and the compilation of this way? I sold the customer on FM mainly due to the ability to compile several book of basic documents... so, I really hate to have 4 copies when I give the source. I know that you can select rows in a table for a version (so I could do a very large table for 3 versions and simply choose different lines), but this is one thing that seems almost certain to make it crash as well.  And the paintings of masters have an extra column, but also a line so I still need 2 tables by doc so I could get the conditional statements to stop crashing. Is there a better way to 'design', which could suggest an experienced FMer? Some custom utility which works even if it isn't free?

  Just in case someone asks:

  The system configuration

  FM 11

  new facility in August, not upgraded

  All the files are originally from FM11 and new

  Windows 7-64 bit

  20 GB of memory

  2 TB - local disc c /.

  Thanks for your suggestions on this.

  Well, it didn't crashed this morning when I put the x back references in the conditional table. Sent to fmerror with the steps for dupe.

  But on the mif wash. I've done it "manually" once a week now for the last two weeks. Can't say if it is to help, but it is always recommended, so I do. However, I was wondering if anyone had a recursive script that would do this automagically...

  Thank you

  Laurie

  Edit:

  Search mif washing (and variants) and nothing gets on the Adobe site. I figured out through a vague reference to an old thread where to find it and thought that I note for new users: If there is...

  Book MIF Wash is that a utility provided by Adobe that recursively traverses all the files in your book, opens, writes the .mif file then re-recorded this file to your FM - washing apparently file everything watered in your FM file. Manually, this process takes forever. And even if you see frequent references to: did you do a mifwash yet? "when someone has a problem, there is no documentation on what I found.

  It is a "sample" allowing Adobe script.

  Go whenever you have installed FrameMaker and navigate to the BookMIFWash folder or browse to the file BookComponentMIFWash.dll, which in my case was to C:\Program Files (x 86) \Adobe\AdobeFrameMaker11\Samples\ScriptsAndUtilities\BookMIFWash.

  Copy the file BookComponentMIFWash.dll in C:\Program Files (x 86) \Adobe\AdobeFrameMaker11\fminit.

  Restart the console.

  Then you will see that nothing has changed.  ;-)

  You must select the book with your mouse in the Document window, and then the menu item utilities book "dynamically" appears. Down there, you will find some MIF Wash book.

  I always pay attention to the warning to make sure that I have a copy of the entire project before running it. :-)

  Hope this helps someone else.

• Question about the vista and firewire

  Hello all, I am an editor with a camcorder Panasonic GS-120. I used to have a desktop computer running Windows 7 that I used to import my videos with. The way I used to do is simply plug my camera into the firewire port and wait for the capture/import to Windows Movie Maker window to appear. Now, I can use is more than desktop because the fried CPU. So I have to use my laptop which runs Windows Vista. My laptop also has a firewire port, but a 4 port pins and I had to buy a new cable. My cable came today, I plugged it all as I would with my office, and nothing came. I tried to go into Windows Movie Maker, then click Import, but it said that my camcorder is not recognizable or something along this line. So now I have no way to import my videos. I'm pretty sure that of not the cable because it's new I went into Device Manager and uninstalled then reinstalled the driver for the firewire port, so this isn't a problem with the port, and I'm sure that's not the problem with the port on the camcorder. So my question is, what happens? Why can't I import my videos as with Windows 7? Is it possible for me to import videos? In addition, I don't have a VCR or an S-video cable, so that the method is out of the question. Thank you all very much.

  Perhaps the following would offer a few ideas:

  Windows Vista - import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Windows Vista - Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  If the AutoPlay screen does not appear... What follows
  Articles may help:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  And... maybe the following will propose a few ideas:

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://Windows.Microsoft.com/en-us/Windows-XP/help/MovieMaker/download-video-from-camera-to-computer

• questions about the updates and drivers

  I have 2 questions.

  1. How can I reinstall an update failed to install the first time?
  2. If I can get the driver I need mass storage?

  Hello Sherry,

  Question #1: Go into Control Panel, click Windows Update, and then run the Check for Windows Update manually. Download and install the missing update. If you know that you have missed one, but his shoeing not try refreshing the page until the missing update reappears and you can install it then.

  Question #2: The short answer is to go the manufacturer of the mass storage device and look for driver that corresponds to your operating system. For this, you will need the brand and the specific model of your computer, the version and the depth of your Windows 7 system and brand and the specific model of your mass storage device number.

  These instructions are generic as your questions were also. I don't want to insult your intelligence by giving you more that you need, please post here with any details you need.

  Kind regards

  BearPup

• Accept the terms and conditions

  Hello

  I can't accept the terms because I'm a 'kid' (even though my 18th birthday is close). I need my MOM to check the box ts & cs for me but she can't remember her e-mail account. All I need is to know which e-mail account, she signed with. Where can I find this information? The view of windows has been very helpful as far as I searched for a cure for this problem for 2 days now with the only suggestion like a factory reset I'm strongly against that.

  Please please please can someone help me before I throw my phone out of the window.

  Thank you

  Penny

  If she has a Hotmail email or outlook.com go here

  As the account of emissions contain private information that can be shared in a public forum, please use the online form below. They are the only ones who have access to your account information, we simply don't have.

  
  

  
  

  Account of all the partners must now wonder online by using the Microsoft online form

  
  Select the error you must help with and fill in the information requested on the next page.  You must be connected to a Microsoft account to access the form.

  If you are unable to access your main account, you can use another account (if you have one) or create a new one https://signup.live.com/
  

• Question about the bleeding and facing pages.

  Hello

  I'm in trouble with my first InDesign document which is a 96-page Magazine. It will be printed on sheets A3 stapled in the middle. My impression of the guy said it's ok in the form of A4 pages with 3 mm overhang.

  So now when I try to export in pdf print (I check the brand I want to use the documents of bleeding parameters) exports with the sections on the left and right pages (left page exported with? I guess than 3 mm? bleed from the right page and so on). If I replace the parameters bleeding and I set to 0mm it is all ok, but I fear that certain images or text could get cut because I have everything with the substantive benchmarks lost in indesign.

  And I can't uncheck pages face to face since I have some graphs (graphs and so on) that spread from one page to another (on the same spread).

  My question is... I can do and always use the bleeding or (ignore "inside the bleeding' or something) or is it OK to use the export as a spreadsheet instead of individual pages because he wanted pages A4?

  Any help for a beginner would be appreciated. Thank you.

  "' You can set inside bleed to 0 in the configuration dialog of document or in the export options when you make the PDF, or if you absolutely need to have inside purge for creep (want, but check with the printer), see InDesignSecrets" Blog Archive "Pages Breaking Apart to bleed off a spine