Questions, cc .oam animate in Muse cc

Similar Questions

• When I insert my file "adobe" edge oam animate in must I get a rectangular white flash at the head of the animation

  When I insert my file "adobe" edge oam animate in must get a rectangular white flash at the head of the animation?

  Hello

  I would appreciate if you could share the screenshots of the Design view and mode of preview for better understanding of the issue.

  You can also create a temp BC to us URL.

  Concerning

  Vivek

• A question on the accordion in Muse on the positioning

  A question on the accordion in Muse - for example, I put an accordion, a web page with an anchor position and use a menu button to point to the location. However, when I resize the browser, as it is closer to that before, the accordion actually moves to the left side when I use the menu button to go to the accordion. I don't want that, in fact, I would like to the accordion keeps a certain distance from the left of the edge of the browser, instead of from the right. Could you please help?

  Maybe, I'm not decsribAn example is on the Site of the day: http://corlessmason.com/#portfolio , when I resize the closest browser, the photo panel maintains its position and it is only be trimmed rather than be pushed to the left - which is pretty much I would achieve.

  Thank you.

  in fact, I found the solution:

  The Vertical shift muse Web site

  It works perfectly now!

• Edge OAM animate file is blurred in Muse when seen in the browser

  When I place the animate edge in Muse .oam file, the graphic animated or crispy clear, but when I saw in a browser or image previewed in Muse he he seems 'low resolution' and blurred. I can't find any info on this anywhere.

  Everyone knows about this issue or even have a fix?

  Thank you!

  Adobe animate exports to HTML (5) with the help of the technology of the "Canvas" , which works like a flip book of images - indeed - sequenced pixel, instead of the former Adobe Edge animate, who exported completely differently. Continue to use Adobe Edge or switch to the Tumult of Hype (Mac only) If you need a better approach and more user-friendly in the animation...

• How can I get video mp4 for playing the edge animate .oam on page Muse?

  Ok.  I'm pulling my hair out here...

  I am just placing a file of .oam edge animate with video on a page of Muse. The .oam contains a simple icon (that grows and shrinks slightly in a loop to draw attention) that, when clicked (event "on click") made a video .mp4 appear and start playing. Then the video disappears at the end, leaving the new icon (no controls - it just plays and goes when it's done).

  The animation/video playback works fine in edge animate and animate preview of edge browser but when I place the .oam file in my page of muse, the video does not play. I tried the same file without the event 'on click' where the video plays essentially on its own after a second aboard animate and edge Preview in the browser and even once, it does not read in Muse.

  It's embarrassing and I don't know how to solve the problem.

  Does anyone have any suggestions? My .oam file contains a .mp4 file a.webm file, although this will be part of a stand-alone Museum Kiosk and therefore does not need compatibility .webm.

  I'd appreciate any suggestions really.

  I thank very you much in advance!

  Mason

  HA!

  Doggone it! Somehow, I knew that it would work very well for someone else. This seems to be how these things go, isn't it? Exciting video, huh?

  In any case, I use Safari. I tried the image displayed in preview in the preview of the Muse and then tried in "Preview in browser" and it did not work for me. I just downloaded Chrome and will try to image previewed in there. Perhaps that will work.

  Holy crap!  I literally just released the entire HTML for the site of the Muse and opened it in Safari from there and it worked like a champ!  A problem with the perhaps "Preview in browser"?

  Well, color me happy! Perplexed but happy!

• OAM Animate My.cnf in Muse: Limitation?

  Hi, I know you can put the scene to animate either play automatically or not.

  But if this option is disabled, how can it trigger in Muse to start to play? I don't want an animation to play automatically on a page consisting of min Muse - I want have triggered it by a button.

  Help, please!

  Cobus

  Add a button "play" your Animation or animate dash Panel to set up a start using the scrolling movement.

  

• How can you access the content behind an Animate .oam file in Muse?

  I have an animation to open the doors at the bottom of a scroll of Parallax, but once the doors open, I can't click on one of the buttons in my 'room' which have been implemented in Muse. Anyone have any ideas on how to solve this problem? I use CC for both programs.

  par· Al· Lax: the effect by which the position or the direction of an object seems to be different when we look at the different positions, for example, through the viewfinder and the lens of a camera

  More»

  Hello

  Where .oam file is placed above the content, then I'm afraid user would not be able to click on the content that lies behind the animation.

  There are two solutions of workaround that you have. Either have content (buttons behind the open door) placed inside the Animation itself, so that users can click on it.

  Or you can have transparent Rectangles (boxes) placed in front of the animation and apply links. It should appear as behind the animation buttons are clickable, however, these transparent boxes that would be clickable and are placed above the buttons and animation (on the top layer).

  I hope this helps.

  Kind regards
  Sachin

• Visibility in a file IE11 Edge animate by Muse

  Hello world

  I'm not as familiar with forums, but in a closed discussion on Edge Animate, Muse and IE11, I read the of last post "'elainefinnell ' that the Muse team has created a fix solve you the problem with visibility edge Animate in IE11."

  My question is: où can I find this hotfix, and is this also effective when using edge Animate 1.5 with Muse CC?

  If the Hotfix would not work in this case, How can I however solve the problem?

  I hope that I can find a solution in this way to get a file .oam work.

  Very curious about the reactions and greeting,

  Frans

  Hello

  Later versions solves this problem.

  Edge using animate 1.5 and IE 11, you must customize the html file change this tag:

  • Before:
  • After:

  This tag is the head tag.

• When I insert an oam file in Muse I have a white flash

  Hello

  When I insert my adobe edge must animate oam file in I get a rectangular white Flash at the head of animation - same size as the stage.

  http://www.productionangels.com/AOM/

  The white rectangle is the head of animation.

  I tried to use a preload, but the white rectangle occurs BEFORE preload.

  Any suggestions would be greatly appreciated.

  Ciao

  Cathy

  I know that I was 3 months, but I was confroned to the same question (white flash with an edge animation animate OAM inserted inside the Muse), and I came across this thread with a solution

  Paste this code inside theof your page, it avoids the problems of the iFrame:

• How to remove .oam file in Muse after the end of the animation?

  I recently searched this forum and answer to some than others and I can not find how to solve my problem. All similar topics are still 'unsolved', often left unanswered. I made contact with the authors of this topics, but they cannot always solve this puzzle.

  I create my Web site in Adobe Muse and leading edge. I want an intro animated beginning (when it is loading for the first time), and if it is possible - in a full screen mode. After the end of the animation, I want it to disappear and reveal the content of the site, which should be clickable. It would be the best if the animation could be created as animate, but if there is no other choice, it can be gif or mp4.

  
  

  Here is an example of Web site and my problem.

  Link: http://problem.bplaced.net/

  I tried to solve my problem of all the ways that I know. After the end of the animation and transformation to the alpha 0, it is still covering the menu and making it unclickabe. After that, I tried to put in the edge layers animate in stop mode after the end of the animation. I also tried to minimalize the scene at the end of full hd 1 x 1 px. I tried all methods do not work.

  And this is ZIP that contains the whole of the site. Muse and edge file.

  Link: http://problem.bplaced.net/download/full_site_muse_and_edge.zip
  
  

  My knowledge of programming, it's just basic Basic, a down-to-Earth answers please.
  
  

  To the moderators:

  If by chance somewhere in this forum you can find answer to my question, please don't brand just my problem "solved" with no response to the left. If you know the answer, please give it to me. Marking of the subject as "resolved" does not at all help.

  Thank you!

  Hi Michal,

  Have you tried selecting display: no at the end of the animation?

  Kind regards

  Akshay

• edge sensitive oam animate in fluid grid

  Hi, my question is maybe totally recruit one, but I can't get the package of edge animate sensitive to resize smoothly in the Dreamweaver fuid grid.

  It is not wide enough or the height doesn't fit, which translates the footer to be away.

  It probably has to do with the size of the object tag when I insert the CAO.

  < object id = "EdgeID" type = "text/html" width = "960" height = "510"...

  Change the sizes to 100%, it works very well for width, height's strange features, showing only a small part of the animation in each view.

  Is this a problem of oam packets or just my poor knowledge of the CSS language?

  Attached screenshots:

  

  Thanks a lot for your help!

  B.

  I came across this problem when recording to Adobe Dreamweaver CC: learn by video for Adobe Press. The way I handled it was by adding the next block of JavaScript just before the closing tag on the page that contains the object to animate dashboard:

  This example gets the width of the animation (the default ID is EdgeID). It then adjusts the height by multiplying the width by 0,562. You need to fix the scaling of the image in the next line to fit the proportions of your animation:

  Anim.style.Height = (w *. 562) + 'px ';

  I don't remember all the details because it's more than a year ago that I did. I remember well, edge animate generates the right height for the animation, but it is not the height of the

• Problems with edge animate in Muse and chrome

  I have a small header built in animate... works very well in exported HTML anime...

  When putting in the animated animate OAM packet, then inserted into my site from Muse...

  everything looks fine in the preview browser (chrome) then when you export as html... it gives this error

  MuseJSAssert: Error calling function error: selector safety: cannot read property ' content 'document ' of 'HTMLIFrameElement': blocked a frame within the origin "null" access to a framework of cross-origin.

  If I had known what it means maybe I could fix it...

  It was only in chrome... IE works ok

  Yes, I think that will be the case.

  Click on publish. Test on Adobe hosting sites are free. It is literally one click on publish, choose a name for your test site and click OK. In seconds, you'll have a site on the internet.

• Egde button animate in Muse

  Hi guys I'm new at this,

  I made a button in EA ande can I import in Muse as a file oam

  I made a function on click window.open ("/ www.mywebsite.com/btn.html", "_blank");

  but he never follows this link, instead, it goes to the record of assets looking for IT... What can that I do?

  (Sorry my English)

  Hello

  I think that you are facing the same problem, such as mentioned in the thread of the forum e below.

  https://forums.Adobe.com/thread/1547404?start=0&TSTART=0

  Instead of using window.open ("/ www.mywebsite.com/btn.html", "_blank") you should use window.open("..) /.. BTN.html","_top"); ".

  Bearing in mind that btn.html is a page created in muse site map.

  Concerning

  Vivek

• Cannot insert .oam (Animate) in HTML format

  I have prepared a project of animate .oam Board and you want to insert the file in HTML format by using the functionality of dreamweaver (insert media).

  I get the error message (in German) which says that the code must be changed but cannot be done because it will be locked by a model or a parser.

  Is there another way to get the edge running animation? Or what is the root cause?

  I use DW CC 20141 on Win 8.1.

  Your

  Stephan

  Hello

  I found the problem. I tried to use an edge animation that has a problem already inside Animate. Animate CC 20141 version has a bug in the backup of the projects.

  I tried with another animation of edge and it works by simply inserting the component animate my HTML page.

  Your

  Stephan

• Place the edge Animation (file oam) inside the muse seems to be empty

  Hello

  When I am placing edge inside the muse animation, all that I can see is just the boundaries of animation, but not a preview image.

  

  any IDE how to fix?

  Hi Shlomiii,

  It's the behaviour expected of an OAM file, it does not show in the view Design of Muse.

  You can add a fill color to the animation in the Muse, to keep track of its location, and when you're ready to publish your site, you can remove this fill.

  Concerning

  Sonam