Questions of the toolbar after the update

Similar Questions

• A few Questions on the updating of 8.0 to 8.5.1

  Hi all

  I am updating to 8.0 8.5.1 and have a few questions:

  1. the drivers I installed in 8.0, I guess they must be installed again to 8.5.1 version correct? Simply install these drivers OR again since the 8.5.1 disc? Is there something I need to watch out for?

  2 8.0 are automatically deleted after installing 8.0 or I have to delete manually?

  3. after the update 8.5.1, wait not much difficulties in the management of the screw that I created in law 8.0?

  It'll be all for now... thank you all for your help!

  1. Yes. No problem

  2 no. I suggest that you not remove any, where you need. Just don't use it.

  3 n ° but you never know. So I advised to only keep version 8 too

• Question about the update of the ICS

  Hello

  I've updated my bow to android 4.0.4 yesterday, and his great performance, I just want to ask when I updated it I did not remove my SIM and SD card, after updating all my contacts where always there and my installed is still installed, is this ok? I want to say that I expected that my installed applications will be

  deleted and my contacts, my messages and call logs too but, after the update, nothing has been deleted and the phone works to 4.0.4 android os, pls help.

  P.S. the updated software was great, my phone is running smooth, thanks Sony,

  Yes, its normal, when the update using SUS you have two options here, update your phone without deleting your files or factory resetting your phone then install the update, or if you download the OTA update no file will be deleted. If you have problems you can reinstall the update or data factory reset your phone.

• questions about the updates and drivers

  I have 2 questions.

  1. How can I reinstall an update failed to install the first time?
  2. If I can get the driver I need mass storage?

  Hello Sherry,

  Question #1: Go into Control Panel, click Windows Update, and then run the Check for Windows Update manually. Download and install the missing update. If you know that you have missed one, but his shoeing not try refreshing the page until the missing update reappears and you can install it then.

  Question #2: The short answer is to go the manufacturer of the mass storage device and look for driver that corresponds to your operating system. For this, you will need the brand and the specific model of your computer, the version and the depth of your Windows 7 system and brand and the specific model of your mass storage device number.

  These instructions are generic as your questions were also. I don't want to insult your intelligence by giving you more that you need, please post here with any details you need.

  Kind regards

  BearPup

• No response to questions about the updates on the CC or LR Help menu

  I recently spent my account for a free membership of canon 1 year after having bought a camera from them.  Now, I find that when I click on the drop-down list on CC emblem at the top of my screen, it is empty.  Also, when I try to see the updates from one of the two LR or CC applications, I get no answer.  What has gone wrong

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• Question about the update

  So when I bought my phone it was already updated to Lollipop (5.1) and missing only the updated jour.264. When I updated the phone I got only 47% battery (some say I shoukd have more than 80%) and the plant does not reset it.

  Bad conduct? Thank you!

  Nothing, keep an eye on the features of the software. And enjoy your device.

• Yet another question about the update with the shutters tab

  I am quite new to this, but I've been scouring the boards and try many different things, and I decided to ask for advice.

  There are other threads similar to my problem such as:

  http://supportforums.BlackBerry.com/T5/Java-development/SetFocus-issue-with-tabbed-screen-page/m-p/6...

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-delete-a-Manager-or-a-field-that-is-c...

  I have a set up tabbed pane based on the example and everything works fine until I have delete a line from a VerticalFieldManager. It is by default the focus on the first item on the screen, and I get this. My problem is trying to substitute or replacement behavior.

  My screen implements the FocusChangeListener for the buttons on the tab (custom LabelFields).

  I tried many different variations - I tried to manage the update completely manual and ended with a bit of a mess. I tried to capture the event navigationUnclick() and coding of the focusChanged() method to manually switch the update, but it seems that the focusChanged() method is called before the focusChanged(), which doesn't help me.

  As I said I am pretty new to this so I could do something very stupid, but I don't really understand the focus handling implementation. A kick in the right direction would be appreciated.

  Thank you.

  You can have a NullField in your managers before all other areas - in this way, even if you delete the rest, the NullField might keep the focus.

  If this does not help, try the substitution of sublayout for your managers, call super.sublayout and then explicitly setFocus to your NullField (the deletion of any field causes a display Manager to rearrange).

• ATI icon in the toolbar after an update

  Just curious as to why the usual red icon with "ATI" in white letters now disappeared from my taskbar Vista today, after I installed an AMD ATI Radeon Windows Update.

  Hello Barry,.

  If it turns out that you are missing any functionality after installing the driver from Windows Update, you can get the latest driver from your manufacturer's Web page.  This should return the feature.

  Best regards

  Matthew_Ha

• Question about the update of value added for the Satellite P100-160 package

  Hello

  I got an email off the coast of Toshiba today telling me there is a value added package update available (PVAT (v1.0.25).
  I downloaded and unpacked. It contains three options:
  2 don't buttons, button 6, no button but there is no readme etc to tell me which version is my P100-160.

  I have added, trying to install one of them gives me an error that it has already installed older versions that should be deleted everything first.

  Can someone advise please that I should use?
  Thank you!

  Hi guys

  Value added package contains many different Toshiba and utility tools!
  Satellite P100-160 belongs to the PSPAA series! So, you should always choose this series if you want to download the drivers from the Toshiba page!
  This number can be checked on the bottom of the unit.

  I visited the page of the Toshiba driver and checked the details.
  You will find an info that this package installs a range of important public services.
  -TOSHIBA components common Driver: this module is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  -TOSHIBA Power Saver: The energy saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
  -TOSHIBA utility: this program allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
  -TOSHIBA password utility: this utility allows you to set a password that restricts access to the computer.
  -TOSHIBA Flash Cards: This utility provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
  -TOSHIBA PC Di

  In my opinion, if you want to update the package of value added, you must remove all the tools of this and after new reboot you must install it again

• Questions about the update of the driver.

  I installed Systweak Advanced Driver updater, which is a Microsoft Gold partner.

  When I run the software it says that I have to update of 25 of them.

  However, when I go to Device Manager and select update drivers, Microsoft says no driver 6 I checked the necessary update.

  A bit confused, which is correct after all I don't want to update a mess, a laptop work?

  This uninstall utility, use it only will lead to problems.

  Saying that they are a "Gold Partner" is meaningless.

  If a brand PC or laptop, you get updates of the driver, if necessary, of the manufacturers of PC technical support site.

  Later model PC brand often have an automatic driver update utility

  Also do not install any Optimizer utility, of a type usually described as "SpeedUpMyPC", also have the ability to cause problems and custom, to do something for 'speed '.

• Questions about the update of the related .ai files

  I have two questions about related images.

  (1) sometimes when I make changes to an .ai file, the InDesign document will automatically update the image as soon as I save changes in Illustrator. In other words, I do not need to update the link in the Panel links ID.  Other times, however, the link will not update, and I have to click the yellow triangle next to the image in the links Panel to see the changes. Is there a reason why this is happening and is there an easier way to update images as the links Panel. In Quark, I could simply double-click on the image, and a dialog box asking if I wanted to update the image. This isn't a big problem for me, but I thought I'd ask.

  (2) every time I make a change to a file .ai, the image linked in InDesign always re-scales, and I can't understand why he's doing or how to stop it. For example, I placed a bar graph in Illustrator in a fitted frame and sound + x and + values there. He settled on a scale 100% and I will not change that. Then, I had to make a change to a text label on the chart, making the slightly smaller chart. When I updated the link in InDesign, it has been resized to 118.12%. I had to get into the x field + sign in the command bar and type 100% to get back to the level it was before.  Is there a default setting that I have to uncheck to disable this feature? If not, is there by chance a simple combination of keys that will allow me to re - scale the image quickly?

  Thank you in advance for your help!

  1. looks that you sometimes select art or thename of the link and choose "Edit original" and sometimes you just need to open art and make changes. If you say that the ID to change original it updates to the Save.

  2. There are two options, depending on version, for the behavior of repeat and scale. In CS5 (and CS4 if I remember correctly), you have the choice between them in the preferences in previous versions, it is one or the other, depending on the version. One option is to preserve the dimensions, which is wha'ts that happens to you. The other is to keep scale. Exactly how to preserve the dimensions behaves depends on it, too much on the cropping options you have used when you place the .ai file. If you cropped to aret or encompassing, for example, change the size of the art or to remove a point wandering affect art or the bounding box, but of culture media would not change.

• Questions about the update of an application in the app store

  I am a member of creative cloud working with simple editing DPS. My app was approved by Apple and is in the store. But, of course, there is a typing error. What should I know about the submission of an updated version. Should have a new 1.1 version number to say? Can I use the same mobile both provision and development 12 certificates? Is the review ordering process more when it's an update?

  Thank you

  Chuck

  Hi Chuck,

  Subscribe to Adobe Creative cloud can revise their applications (and submit their applications reconstructed at Apple) as long as they subscribe to creative cloud. When you change your application, use the same ID App and distribution provisioning profile to create the new custom Viewer. In DPS App Builder, select the existing application that you have created and click on modify. Specify the latest version of the app, if you want and follow the prompts to create a new app download and test the development agenda. In iTunes Connect, click on manage your Applications, click the application that you want to update, and then click Add Version. Follow the prompts and then use Application Loader to download the .zip file.

  Concerning

  PEREADEL

• Question about the update of a cursor for loop

  Hi, please someone could help with the following:
  
  I have a simple script below:
  
  declare
  
  cursor c1 is select name, salary of employers;
  
  
  Start
  
  for rec loop c1
  
  dbms_output.put_line ('employee' |) Rec.Name | ' s former salary was £' | Rec.salary);
  
  update of employers set salary = salary * 1.2 where name = rec.name;
  
  
  dbms_output.put_line ('employee' |) Rec.Name | "new treatment is £' | Rec.salary);
  
  end loop;
  
  end;
  
  This gives me the old value of the salary, but the output for the new salary remains the same, that is to say, it has not increased by 1.2.
  
  Ive tried to run in the 2 loops that works, but does not give me in order I want, IE employers followed old sal nine.
  
  Ive tried to add is committed and various other things, but it makes no difference. I thought that the script above should work. Where I'm going wrong?
  
  Thank you very much

  882839 wrote:

  I learned (perhaps wrongly) that cursor for loops were good practice. Is it not the case?

  Could you mention who told you this?

  I'm curious because on a daily basis in almost all the sons of my treatment is slow , the reason for the slow transformation is the loop and all responses point out that you are using a loop ensures that the process is running more slowly as possible.

  But despite any response in this community saying loops are the worst practices, every day more people come here apparently having learned exactly the opposite and then wonder why their program runs like a dog three legs with an anchor attached to his tail.

• Question about the update statement

  Hi all
  
  
  UPDATE table_name
  SET Column1 = value, column2 = value2
  WHERE condition;
  
  I have an update like this statement. What happens when I run the above statement, when there is no column named Column2 in the table? If it creates a column named column2 and value2 using?
  
  Instead should first create a new column named Column2 in the table first and then run this update statement?
  
  Please, someone good to explain.

  Hi, this statement (it is a dml statement) will give an error, because the Column2 does not exist in the table. You must add the Column2 by an alter (ddl statement) statement. Then, you can try to execute your statement.

  Kind regards
  Saby

  Published by: 793420 on September 7, 2010 14:48

  Published by: 793420 on September 7, 2010 14:48

• Question of Smartphones blackBerry after software update

  Phone model: Curve 8530

  So, after weeks and weeks of terrible trouble with my phone spontaneously reset I finally upgrade my phone software.

  However, when he returned finally to the top and I had backed up my contacts and protect the texts of blackberry, I realized that I had to add my e-mails via email, set up. When I tried to connect with my information for blackberry app world / protect, he said

  "User namewhite." Type a valid user name. »

  I had used my blackberry ID / e-mail that was associated with my phone for two years and who came. When I put in place in shelb896 (which is the username associated with my blackberry ID..) and password and he said it was a combination not valid.

  .

  My question is this: why is it say that? Any tips?

  Hi all!

  So I solved the problem, hurrah!

  Here are the steps I took:

  1. I tried to open a session my Blackberry Internet service account, it says my name of user and password is incorrect.

  2. I tried to send the password to my phone, but because the e-mails did not come through I obviously couldn't do this.

  3. I called the technical support - the man told me that in this case, it is quite necessary that you must call in order to reset the pin code, it gave me my log in information and reset my emails. I was told to take out the battery while what was going on and then about 5 minutes later I put it in still on the phone, as everything reset.

  After a few minutes that I had put all my emails and my text messages, which had been in the queue have also crossed Hooray!

  Basically, if you have a problem of this kind give your service provider a call. I couldn't be happier with the service I received from them today!