Questions "reconfigure the virtual machine.

Similar Questions

• We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

  Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

  Version for esxi: Patch 5.1 level 7

  Virtual center of version 5.1

  Source of storage - IBM v7000

  Destination storage - Hitachi

  
  Questions:
  Events of breach RPO
  Consolidation for the VM disk failure
  Delta abandoned events
  Time change events
  NTFS error and warning (event ID: 137, 57)
  RDP disconnect and ping does matter
  Standby error
  Volsnap error
  Stop the server and offline issue
  Install vmtools emits automatically

  well, in this case, we need to disable the standby of the end of the replication.

  So that everything in triggering replication does not trigger the snapshot of the suspension.

  Then test the if you get these errors.

• With the help of gsoap/C++ web SDK problem reconfiguring the Virtual Machine

  Hi all, I m using gsoap/C++ with web service sdk to monitor virtual machines.

  I m able to enumerate the current list of virtual machines, total number of vm. Now I m trying to reconfigure the virtual machine. My Code snippet is as below.

  The virtual machine is running and I m trying to change the ram, I did it using java api and it doesn't butfor c ++ it is in error.

  ns1__VirualMachineConfigSpec vmSpec;

  ival long 64;

  vmSpec - & gt; memoryMB = & ival;

  ns1__ReconfigVMRequestType reconfigVMRequestType;

  reconfigVMRequestType.spc = & vmSpec;

  reconfigVMRequestType._USCOREthis = vmObject - & gt; obj; managed object - virtual machine

  NS1_ReconfigVM_USCORETaskResponse reconfigVMResponse;

  ns1__ManagedObjectReference * morResult = 0;

  If (vim - & gt; __ns1__ReconfigVM_USCORETask (reconfigVMRequestType, & reconfigVMResponse) == SOAP_OK) {}

  morResult = reconfigVMResponse.returnval;

  } else cost & lt; & lt; "Unable to machine virtual reconfig." & lt; & lt; ENDL;

  Now in vSphere Client it show me error like.

  The operation is not supported on the object.

  And on server esxi in file /var/log/vmware/hostd.log it not show gives following error.

  The task was created: haTask-32 - vim.VirtualMachine.reconfigure - 1422

  2009-08-26 20:54:17.669 verbose 149A5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure: (vim.vm.ConfigSpec) {}

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  2009-08-26 20:54:18.122 149A5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_ON - & gt; VM_STATE_RECONFIGURING)

  2009-08-26 20:54:18.125 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Memory hot asked.

  Load: Existing file loading: /etc/vmware/license.cfg

  2009-08-26 20:54:18.139 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Verified hot license

  CloseSession called for the session id = 52f7f6aa-3ef8-c52a - 815 a - 75B 421405075

  Event 714: Root user is disconnected

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: version 32 overflow name aggregation

  ERProviderImpl & lt; BaseT & gt; : _GetChanges: aggregate the version 32 overflow triggeredAlarmState

  2009-08-26 20:54:18.979 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Current state of the VM management: disabled

  2009-08-26 20:54:19.071 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Implementation State of follow-up to the virtual computer for people with reduced mobility.

  Ability to root pool has changed to 1104 MHz / 521MB in 1104 MHz / 520MB

  2009-08-26 20:54:21.108 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Remove hot memory not supported: newMemory: 64, curMemory: 128

  2009-08-26 20:54:21.110 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Batch hot failed during the application of the individual changes.

  2009-08-26 20:54:21.113 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure is not

  2009-08-26 20:54:21.114 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Exception that is thrown when the statement reconfigures: {(vim.vm.ConfigSpec)

  dynamicType = & lt; unset & gt;

  changeVersion = & lt; unset & gt;

  name = & lt; unset & gt;

  version = & lt; unset & gt;

  UUID = & lt; unset & gt;

  instanceUuid = & lt; unset & gt;

  npivWorldWideNameType = & lt; unset & gt;

  npivDesiredNodeWwns = & lt; unset & gt;

  npivDesiredPortWwns = & lt; unset & gt;

  npivTemporaryDisabled = & lt; unset & gt;

  npivOnNonRdmDisks = & lt; unset & gt;

  npivWorldWideNameOp = & lt; unset & gt;

  locationId = & lt; unset & gt;

  ID = & lt; unset & gt;

  alternateGuestName = & lt; unset & gt;

  annotation = & lt; unset & gt;

  files = null (vim.vm.FileInfo),

  Tools = null (vim.vm.ToolsConfigInfo),

  Flags = null (vim.vm.FlagInfo),

  consolePreferences = null (vim.vm.ConsolePreferences),

  powerOpInfo = null (vim.vm.DefaultPowerOpInfo),

  numCPUs = & lt; unset & gt;

  memoryMB = 64,

  memoryHotAddEnabled = & lt; unset & gt;

  cpuHotAddEnabled = & lt; unset & gt;

  cpuHotRemoveEnabled = & lt; unset & gt;

  cpuAllocation = (vim. NULL in ResourceAllocationInfo),

  memoryAllocation = (vim. NULL in ResourceAllocationInfo),

  cpuAffinity = null (vim.vm.AffinityInfo),

  memoryAffinity = null (vim.vm.AffinityInfo),

  networkShaper = null (vim.vm.NetworkShaperInfo),

  swapPlacement = & lt; unset & gt;

  swapDirectory = & lt; unset & gt;

  preserveSwapOnPowerOff = & lt; unset & gt;

  bootOptions = null (vim.vm.BootOptions),

  vAppConfig = null (vim.vApp.VmConfigSpec),

  ftInfo = null (vim.vm.FaultToleranceConfigInfo),

  vAppConfigRemoved = & lt; unset & gt;

  vAssertsEnabled = & lt; unset & gt;

  changeTrackingEnabled = & lt; unset & gt;

  }

  vmodl.fault.NotSupported

  2009-08-26 20:54:21.177 703F5B90 info ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' State Transition (VM_STATE_RECONFIGURING - & gt; VM_STATE_ON)

  2009-08-26 20:54:21.180 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Authentication data that are not available during activation

  Event 715: Reconfigured Win Vista on kudosiesxi118 ha-data center

  Change of State received for VM ' 32 "

  2009-08-26 20:54:21.598 verbose 703F5B90 ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Time to pick up some config: 415 (MS)

  Task completed: error status haTask-32 - vim.VirtualMachine.reconfigure - 1422

  Add vm 32 to poweredOnVms list

  2009-08-26 20:54:21.694 703F5B90 warning ' vm: / vmfs/volumes/4a8ae0ff-0f4ce1a8 - 47 d 9-000c29570e19/Win Vista / Win Vista.vmx' Reconfigure the worker thread failed

  Problem in the virtual machine is in the power on State or I m doing something wrong?

  Can any body tell me where I m wrong?

  Rather than use a C string, try using the String object.  In my C++ sources generated the WSDL, the expected properties are string objects and references to string objects, not strings C.

• Impossible to reconfigure the Virtual Machine error

  Hi all

  Newbie here.  I am trying to convert my Windows XP Version 2002 SP3 (it's a virtual machine) to my new IMac with Fusion 4.1.1 (536016).

  When I run the migration agent, everything is fine and he says his will last about 2 hours.  20 minutes or so, I have error with "unable to reconfigure the target Virtual Machine.   My PC is up to date with Windows updates and pretty vanilla.

  Here are the last few lines of my log file:

  EIP backtrace [16] 0x101362c3 ? GetThreadId@System@Vmacore@@YA_JXZ
  _endthreadex eip 0x781329bb backtrace [17]
  _endthreadex eip 0x78132a47 backtrace [18]

  [08-03-2012 07:18:10.124 01264 verbose "PropertyProvider"] ASSIGN RecordOp: info.transferRate, task-1
  [08-03-2012 07:18:10.124 01264 verbose "PropertyProvider"] ASSIGN RecordOp: info.completeTime, task-1
  [08-03-2012 07:18:10.124 01264 verbose "PropertyProvider"] ASSIGN RecordOp: info.error, task-1
  [08-03-2012 07:18:10.124 01264 verbose "PropertyProvider"] ASSIGN RecordOp: info.state, task-1
  [08-03-2012 00276 verbose 'Ufa.HTTPService' 07:18:10.124] HTTP: Complete (processed 1315 bytes of response)
  [08-03-2012 07:18:10.124 01264 info "App"] [task, 374] task [1] - ERROR - convert: converter.fault.ReconfigurationFault
  {(converter.fault.ReconfigurationFault)
  dynamicType = < unset >
  faultCause = (vmodl. NULL in MethodFault),
  Description = "Preparation of Reconfiguration failed",
  MSG = ""
  }
  [08-03-2012 03472 verbose 'HttpSvc.HTTPService' 07:18:10.358] User agent is 'VMware-customer '.
  [08-03-2012 03472 verbose 'HttpSvc.HTTPService' 07:18:10.358] HTTP response: customer: NeedsContentLength: true UnderstandsChunking: false CanKeepAlive: true (PresetContentLength-1)

  Any suggestions for what may be the problem are greatly appreciated.

  Thank you

  Jim

  There is no configuration file .vmx in the packaging of the Virtual Machine,

• 98% has FAILED: unable to reconfigure the virtual destination computer. Linux machine

  I'm trying to convert a Linux x 64 machine and get this error at 98 percent.

  «FAILED: unable to reconfigure the virtual machine of destination.»

  I attached the logs, please help.

  Hello

  Your problem is the same as in Linux P2V: no space is available on the device

  I recommend that you use Converter 6.1, it adds automatically more space on the volume / Boot to avoid these problems.

  HTH
  Plamen

• How to set vm-description/notes and get the name of the data store, where the virtual machine

  Hello guys,.
  I have vCenter Orchestrator 4.1.1 build 733 installed and it works fine, but I need your help for the following two issues:
  (1) I want to put the description/notes of a virtual machine using a workflow. But I have not found any API useful to create this workflow (I don't want custom attributes, see attachment for details).

  (2) how can I get the name of the data store, where the virtual machine? I need this name for a workflow.
  I need your help.
  Thanks in advance!

  With regard to the notes of the VM, the following code (see enclosed package) can do this:

  var oldNotes = vm.summary.config.annotation;
  If (oldNotes == null) {oldNotes = ' ' ;}}
  System.log ("Notes of VM current:" + oldNotes);
  Now put the new notes:
  Start by creating a context
  Context of var = new VcVirtualMachineConfigSpec();
  Update the annotation with the new value property
  configSpec.annotation = notes;
  launch the task to reconfigure the virtual machine with the new context
  NOTE: This is sure to apply with a virtual machine under tension
  var task = vm.reconfigVM_Task (configSpec);

  And, in what concerns the VM information, take a look at the workflow of the library: \Library\vCenter\Virtual Machine management\Others\Extract virtual machine information

• Question to delete the virtual machine

  Hi all

  ESXi 4.0 and 4.1

  1. when I "delete VM from disk", why sometimes the record (with disk vmdk files) are not deleted? Is this a normal behavior?

  2. If the size of the virtual machine is 100 GB, can I expect that there will be 100 GB of space released in the data store?

  Thank you.

  Fajar.

  (1) why vmdk can be detached? What is the cause?

  1 - in fact the only one - is that the virtual disk has been manually detached.

  (2) why ESXi don't simply delete the entire folder when you are prompted to "remove disc"? You can probably avoid this kind of problem.

  For security reasons, only files that are known to belong to the virtual machine will be removed. The problems you get with deleting too many files is generally much more severe than the one you if a file is not deleted.

  I check the file against the inventory, but it becomes tiring when the folder is located in the shared data store, I check against several hosts.

  In 99% of cases (have you seen, I did not use the word "generally") ' delete drive ' will delete all files related to the virtual machine. In the case of a shared storage you don't have to check on each host, since, in the majority of cases (again once I have use 'usually) all guests have access to the same storage.

  Another reason why the - mainly the vmdk files - files cannot be deleted, is when they are locked. For example, by a hanging backup process.

  André

• Question about how to include the virtual machine output

  Currently, using this command:

  Get - vm | Get-networkadapter | ForEach-Object {Write-Host $_.} The name', ' {$_.macaddress} '.

  Gives me this result:

  NIC 1, 00:50:56:bc:00:1 c

  NIC 1, 00:50:56:bc:00:28

  I'm interested also in writing the name of real virtual machine as well.

  name of the virtual machine 1, NIC 1, 00:50:56:bc:00:1 c
  name of the virtual machine 1, NIC 1, 00:50:56:bc:00:28

  Don't know how to work out of virtual machine name as 'Name' asks also the network card information.

  Try it like this

  $report = foreach($vm in (Get-VM | where {$_.PowerState -eq "PoweredOn" -and $_.Version -eq "v7"})){
      Get-NetworkAdapter -VM $vm  | `    Select @{N="VMname";E={$vm.Name}},
           @{N="MAC address";E={$_.MacAddress}}
  }
  
  $report | Export-Csv ".\test.csv" -NoTypeInformation -UseCulture
  

• What windows key you use to activate one of the virtual machines on my Hyper-V on Windows Server 2012 R2 Std

  I installed my Hyper-V role and now wants to activate one of the virtual machines, but the key is not recognized.  Should what key I use?

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you in the Forum of Hyper-V on Technet.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  Or:

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002

• Windows XP Home Edition (Version 2002) include SP1 is the Virtual Machine for Java (MSJVM) installed on this and future Service Packs Microsoft remove it?

  While the installation of Microsoft DirectX 9.0 c on my Windows XP Home Edition (Version 2002) operating system (not sure if the 2002 version in it's original state included SP1), EULA (EULA) provided the contract included a paragraph stating that "ONLY in regards to THE VIRTUAL MACHINE MICROSOFT FOR JAVA, YOU ARE ONLY ALLOWED to INSTALL THIS OS COMPONENT ON A MACHINE THAT CONTAINS A ALREADY the VERSION OF THE MICROSOFT JAVA VIRTUAL MACHINE". Assuming that the MSJVM was included with Windows XP Home Edition (Version 2002), I advanced and accepted the EULA. I then downloaded and installed Windows XP SP2 and SP3, but wasn't sure whether SP2 and SP3 removed the MSJVM in any point. However, research on the question, I discovered the site "FAQ of Transition MSJVM" (updated May 7, 2004), who answered the question: ' if I install Windows XP SP1a or later, it will remove my current MSJVM? " with "No, the operating system upgrade will not remove a MSJVM existing on the computer" (http://www.microsoft.com/about/legal/en/us/interoperability/java/faq.aspx). However, I can't find any instance of it on my computer.

  So my questions are:

  1. Windows XP Home (Version 2002) Edition include SP1?
  2. The MSJVM is installed on this version?
  3. SP2 or SP3 removes the MSJVM in any point to?

  Hi Chris,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• the virtual machine monitor driver required by the virtual machine is missing

  Hello
  After you install virtual pc xp2 and when I run this program I got this messege (the virtual machine monitor driver required by the virtual machine is missing)
  What is the answer

  Hi jameelaswad,

  The question you have posted is better suited in the forums of Virtual PC. Please see the following link for more information.

  Windows Virtual PC / Windows XP Mode Forum

• I get an error "the disk hard virtual parent is in a saved state. Discard the saved state or stop the virtual machine and try again. "during the installation of XP mode.

  I have Win7 Pro SP1 x 64.  I downloaded WindowsXPMode_en - us.exe (from Microsoft downloads) and run it.  The installation seems to work OK (I've specified a different location for the parent virtual hard disk file).  Then, installation happening and I provide the information requested (name of user and password for the XP Mode), updates Windows and OK to the issue of sharing.  The installation program then reports the following error:

  The disk hard virtual parent is in a saved state.  Discard the saved state or stop the virtual machine and try again.

  I get the error even if I try manually configure XP Mode (use the Setup Wizard).  I downloaded the installer XPMode (3 times) and reinstalled several times, always with the same result.  If it helps, I can't locate anywhere .vsv file.

  Any idea what's going on?

  Original title: XP Mode Setup error

  Hi smithnr10,

   

   

  You must post your question in the TechNet forums because it caters to an audience of it professionals.

  To do this, you must consult the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

   

  Hope this helps!

• whenever I have to connect to the virtual machine asks me to enter login and password I can't save the credentials

  Hi, I used Windows Virtual PC XP mode for awhile and I just do a fresh install, and I'm having a problem that I seem not to be able to solve.

  After you enable the integration features, I got to the Windows Security login screen. I typed in the login and the password, but I accidentally made a mistake and could not connect. I clicked on cancel and was then in the XP login screen, where I entered then the right login and password and it me connected to the virtual machine XP without problem.

  Now, the problem I have is every time I connect to computer virtual it asks me the login and the password on the login screen of XP and I don't have the option to connect using the login Windows Security screen, so it do not give me an option to save my password and login information. So, to make things worse is that moment every time I have to resize the virtual pc it then asks me to log in again.

  Is it possible to return me to the Windows security login screen where can I put my login instead of the XP login screen when it is not an option?

  Hi Richard,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Restore the Virtual Machine from Windows 7

  I had set up a virtual computer on another partition on my drive (D:\VM) and my computer crashed and the computer scientist did a restore of the C: drive and I am not currently able to do the old VM to work. I have the following files listed under D:\VM

  License.NLF

  Windows XP Mode.vhd

  Windows XP Mode.vsv

  Windows XP Mode.vmc

  Windows XP Mode.vmc.vpcbackup

  Looks like the latest state of the virtual machine is on hypernation. How can I make my old VM to work? Need help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope this information helps.