Questions using C3 and Plateau OnDemand
I am having some problems with the functionality/reports of a quiz. It's only my second draft statement, then I'm really my back started with this question. The first course/quiz reports perfectly, functions perfectly and not return any errors. The only difference between the two is method declaration. The first one uses other SCORM, AICC. The quiz on the problem itself is 25 randomly selected questions from a pool with a slide of the intro (total 27 slides). I use SCORM 1.2 content being housed at the iContent and OnDemand Plateau containing the actual LMS (we are completely farmed, with the exception of the development). These are the problems that I work with.Bookmarking - if I leave the quiz in the Middle before the end and run it again, I'm back to where I left when that I raise. If I get at the end of the quiz and fail and start again to resume it, I takes me to question 23 and am not able to resume the quiz of all.
Continue the results screen button - does not seem to do anything when you click it if I do not see the course. If I pass the course, everything works perfectly.
Any help would be greatly appreciated. I looked in the forums to try to avoid a double post, but nothing really treated this specific issue. Sorry, that's such a long post
Hi MrFrankZ and welcome to the forums!
I don't think that the questionnaires are intended to be put into bookmark in SCORM. My understanding is that if a quiz is not performed in one session, it must be restarted from scratch. It's the 'proper' approach is to disable bookmarking for quiz (in Captivate 2, I think that it's the "never send summary data" option in the Quiz Manager |) Tip section. Button settings... do not know where it is in Captivate 3).
That said, you can try to score the quiz in "optional" option and uncheck the "user must answer all questions" in the Quiz Manager and see if that fixes things for you.
The only downside I see is that if you * make it work, I doubt integrated Quiz Resumepage of Captivate can give them credit for the questions that they answered at the previous session. At best, it would be misleading to the user when they access the Quiz summary page, and in the worst case the user would never get credit for the course (if they have too few questions left to give them an overall pass mark).
When you do that, you're probably better to just disable the bookmarking and demanding of questionnaires from the beginning every time.
Tags: Adobe Captivate
Similar Questions
-
Question using FX100 and Windows not registering does not monitor arrangement.
I am using Dell FX100 and view 4.5. All of my users have two Dell monitors, and some of them want to move the main monitor to the right side and extend to the left. It's easy to set up, but I can't figure out how to keep memory settings after reboot/logoff of Windows. Any suggestions? I tried to save a theme without success.
Go to power on the Zero Client, before you connect to a desktop computer:
Options - Settings - display topology.
From there, you will see what you need to do.
Gunnar
-
Original title: Questions using mail app
We got a new laptop in August 2013 and had accounts msn.com e-mail and yahoo on the mail app in windows 8. any fine until last Wednesday 1/10 when we now get message that the msn address is unavailable and it will not sync (or send test message) Yahoo account always fine and no problem on other devices - phone, i - pad & pc and no problems online via explore or google.
Any suggestions? also is there anyway to check the details of the e-mail on the mail application accounts?
Hello
Yes, you can uninstall and reinstall the application only after checking the links below to solve the problem.
What to do if you have problems with a soft
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-appSee also the links: http://windows.microsoft.com/en-ca/windows-8/setup-email-contacts-tutorial
http://Windows.Microsoft.com/en-CA/Windows-8/mail-app-tutorialI hope this helps. Feel free to write us again for assistance and we will be happy to help you come.
Thank you
-
I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you
Hi Julie
You can check the minimum specifications here:system requirements | Cloud Creative
Kind regards
Guinot
-
so many questions: no sound, cannot use USB and dongle...
I have a toshiba satellite l505d-gs6000... I have installed the latest updates for my computer stop for the night he opened in the morning and I have no sound, unable to use USB and dongle... I restored an hour earlier and who fixed it, I have re installed windows os and it does not solve it... the drivers on my sound it's updated but also when I click on its screen it says: no audio output device is installed:
Hello Jason, I've done a little reading on your laptop model, it seems, there is a hardware problem with this range of laptop, which causes the USB and sound to fail. There is no known for this hotfix.
Check out this thread of Toshiba... http://forums.Toshiba.com/T5/audio-sound/no-sound-USB-on-satellite-L505D-gs6000/TD-p/172564/page/8You will need to contact Toshiba customer service if your laptop is under warranty. -
I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?
It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.
-
Question
I wish I could make a website I use ofter and drop it on the screen of firefox under url. Then, I'll have rapid access. How can I do this? I currently use it on my laptop, but recently bought a new computer and downloaded firefox and lost a lot of features that I enjoyed.It was exactly what I was looking for - thanks a lot!
-
Design pattern using queues and notifiers and problem with sync
Hello
I'm rearchitecturing a 4-channel data acquisition system which includes data acquisition, indexing of data between four channels, signal processing and recording of data.
All processes are placed in a single loop, and I have subdivided by the following in a producer and consumer two loop (or master with both loops slave), use a queue to manage orders and send the actual data through a notification list. I'm new to this, so I don't know how to go for rearhitecturing but am trying to move several loops. Instead of placing each channel in its own loop, I used only 2 to save duty all architecture. The acquired data are also indexed in the two loops (loop1, loop2):
Main loop: data acquisition (DAQ Assistant) where Notifier sends data to consumers loops, queue for General commands
Loop1: bed (table 2D index), addresses and records the data for channels 1 and 2
Loop2: bed (table 2D index), addresses and records the data for channels 3 and 4
Question 1: Is it ok to use Notifier and queue in the artchiture (best practices)? I would use two queues, but I find that the program may have a lag (although it lacks all data) and who interrupts the acquisition for the user and I don't want that. I prefer the program to retrieve data in real time and then decided to use the authors of notifications to send data to loops1 & 2. What are the caveats of this? Given that I am gaining at the rate of 1 s/s, maybe it will be enough.
With respect to the orders queue, this is done and two commands are queued in order to activate loops1 & 2. Using multiple loops slave/consumer, how we manage several channels? the user can choose to acquire all the channels simultaneously or one at a time. I am able to activate the four channels. In this case, because loops can not run in order, how do you ensure that the item is read by the right loop?
I'm running into a few problems:
Question 2: synchronizing data - use 'wait on ms' synchronize all loops (main loop and loop1, loop2)
-data doesn't seem to be very good sync - why is - this? consumer of treatment<>
-what I'm missing?
Question 3: processing loss data - because using filers is frozen and using queues is not, I did so that orders of the so-called 'turn on' the two loops is done using a queue. I compared it with the notifiers
Question 4: Errors - I made loops 1 & 2 output on the notifier error error - they throw an error when the program stops so happy so I was testing for. I read some ni.forums he's talking about is enough, but what are the other types of error monitoring (error reporting)? Thank you very much for reading!I programmed so far and it can read all or individual channels but I want check against all cases, that's why I ask these questions to check. I know that architecture may not be the best, so any suggestions would be welcome. I try to get the synchronization of the time and I don't want any data with loss. I guess that the use of queues to send data and commands is ok?
Thank you in advance for your help!
-
Impossible to listen to the music or sounds using internal and external speakers
Original: connect external speakers
I have an Acer Aspire Z5700 all-in-one computer. I have two external speakers with an audio jack and a USB port that I can connect to the computer and I when it is connected to the computer, I hear out of them my question is how to get the sound of the computer system internal and external speakers at the same time?
Hi Joseph,.
I would keep informs you that it is not possible to play sounds or music using internal and external speakers at the same time.
You can play music using any one option at a time, either the internal speakers or external speakers. -
I have microsoft fix Center, there a {codec crashes fix} I used it and it has disabled the files I need, can someone tell me how reinable these files, help please!
Hi Shawnmehringer,
Thanks for posting in the Microsoft Community.
It would be useful that you can answer these questions to help you further.
1. have you installed Microsoft Fixit Center on your system?
2 are. what codec fix you referring?
3. which files are disabled and you try to activate again?
If the problem is related to Microsoft Fixit center, you can ask your question on the Forums of Microsoft Fixit to get help.
Microsoft Fix it Center Forums
If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.
-
The attachment ID has wrong format.
When I use Hotmail and try to attach a document to send by email, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.I have had absolutely no problem in electronic documents before sending.
Please help, thanks.
Hello KerJJ,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
I use Director and I got about 100 picture in my project and I want to bring up more time on the screen when reading it. I know you can do induvdually but I was wondering if there was a way to select all and then make the longer time for each of them. Help, please!
original title: NEED HELP Please REPLY as soon as POSSIBLE. Windows movie maker questionHello
My friend John Papa - MVP - is the expert on Windows Movie Maker.
PapaJohn.org
http://Papajohn.org/PapaJohn - online tutorials
http://www.Papajohn.org/mm2-online-tutorials.htmlWindows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
main screen.
http://www.windowsmoviemakers.NET/tutorials/Windows Live Movie Maker help & how-to and Forums are good sources of information:
Windows Essential - Movie Maker help
http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3Answers - Windows Essentials - Microsoft Windows Movie Maker Forums
http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=threads
====================These might help:
Getting started with Windows Movie Maker
Import video, photos and audio on Windows Movie Maker
Get a movie in Windows Movie Maker
Make a movie quickly in Windows Movie Maker (AutoMovie)
Publish a movie in Windows Movie Maker
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
I have windows xp home edition and I had Silverlight to send photos to my hotmail account, something has changed and now I can't use it and I can not download
Hello
Given that the problem is related to Silverlight, I suggest you post this question in the Microsoft Silverlight forum.
http://forums.Silverlight.NET/forums/
listed below or in the Hotmail forum.
http://windowslivehelp.com/product.aspx?ProductID=1 -
using Vista and Microsoft Works 9. Trying to create a word processing document.
Using Vista and Microsoft works 9. Trying to create a new document in word processing. I want to copy and paste the text of an email or a newspaper article. I did it in the past with XP and a previous version of Works. This time, the system hangs.
I can copy from document to document.
I tried Notepad or something similar, could not find it and try it, even if I don't like the extra step. Of course I can't find anything with Vista anyway. Thank you!!!
Discussions in microsoft.public.works.win
They will help you with your question of work in the work above Newsgroup.
At soon Mick Murphy - Microsoft partner
-
How do I know if I use NAT and PAT for internet connections
Hello
I have a PIX 525 6.3 and I have a stupid question... I do a show xlate and I see that I'm using PAT to internet connections... The old man FW says that we come to the internet. What command can I use to confirm this... because it looks like that to me, we use PAT and NAT not for internet connections. I'm you Cisco router and switch engineer but I now have the responsibility of PIX and I want to make sure that everything is correct.
Thank you
No question is a STUPID question!
Issuing the cmd: sho xlate detail and also sho conn detail and it will show you what you are looking for.
Hope this helps
Jay
Maybe you are looking for
-
Can I use two phones, with separate numbers on the same account?
I'm not an Apple user, so apologies if this is common knowledge! But my CEO is going abroad next week, so we gave him a second phone as a backup in case something happens - with a separate number (we will have diverted current number if necessary). A
-
I could not find any information on this baffling question... On the lower right corner of my laptop, the screen is the word 'Return' in green. When I put the cursor on the word, I just get a blue rotating circle. I never pressed key on the keyboard
-
Since the installation of fix KB973687, I had several SP2 and SP3 systems exhibit behavior that makes them unusable until after the first logon is completed, which can take up to 20 minutes. I've identified the patch (KB973687) and DLLs, that it wi
-
Cannot use my product key to activate the money more deluxe
My top of counter with installed Money broke down, and I'm trying to load money into my laptop.
-
Update of software without a license of Vista? Can I buy a package of upgrade or do I have to install a completely new OS? I have to uninstall or remove somehow the existing operating system?