Quick installation of R12

Similar Questions

• R12 Quick Installation on Suse Linux or Oracle Linux fails

  Hello

  I tried several combinations of operating systems to try and install correctly using the Oracle R12 / quick installation but I could not. My last attempt was on Suse Linux 10. When the installation wizard is complete, database checks are successful but HTTP server is unresponsive and all subsequent checks fail.

  The reading of google and the various threads on this forum, I found that for Oracle Linux, we must apply the patch that contains libdb.so.2. Since then, I do not have an account to support oracle, I cannot get this fix and based on rules, no body can send it in an email, which means that we can not install this distribution on Oracle Linux without having to pay for the supported. Since then, it is a learning exercise without the use of serious production of R12 apps, we do not have any arrangement with Oracle support.

  For Suse, I also have the same problem, but when I try to start the opmn manually using opmnctl beginning, she responds with message, began. But when I use opmn stopall, the computer stops responding. Now, I don't know yet how to start debugging this problem.

  I would give just to try to install it or there at - it a hope?

  Thank you.

  Hello

  I finally managed to install R12 on Suse Linux Enterprise 10 SP3. I decided to start again after a repair for the past two days. Here's the process:

  a. install Suse Enterprise 10 SP3 with office and all development packages offered in the facility.

  b. click the computer--> install the software--> search for the 'db1 '. It will give you two or more packages. Install db1_185xx (from Berkley). This provides a required libdb.so.2.

  c. then go through the installation as outlined in the instructions using rapidwiz.

  It fills correctly and I can see the login screen now.

  Now, I need to know how to put in place to automatically start all services after startup.

  Thank you for your help.

  Kind regards

  Sohail naima.

• Issue in Installation of R12 EBS via thrgh Putty VNC server

  Hi guys,.
  
  I know this may sound quite childish, but still I want to know if we install EBS R12/11i by connecting the machine Linux through PuTTY, OR by logging in via the VNC server.
  
  If we connect via putty do we set the view in this case.
  
  Or if if we connect via VNC server do need us to set the Display variable.
  
  My query is what is the difference between the use of the VNC server and PuTTY in Installation of EBS 11i/r12.
  
  Today my boss noted that I should install vnc server on windows to install EBS rather than using PuTTY according to the setting of the Display variable.
  which I did not quite understand. Where the request!
  
  Really appreciate if you could explain a little more.
  
  
  
  Thanks and greetings
  MZ.

  I know this may sound quite childish, but still I want to know if we install EBS R12/11i by connecting the machine Linux through PuTTY, OR by logging in via the VNC server.

  If we connect via putty do we set the view in this case.

  Or if if we connect via VNC server do need us to set the Display variable.

  You cannot set DISPLAY when you use putty, so you need to use VNC.

  My query is what is the difference between the use of VNC server & PuTTY in Installation of EBS 11i/r12.

  Today my boss noted that I should install vnc server on windows to install EBS rather than using PuTTY according to the setting of the Display variable.
  which I did not quite understand. Where the request!

  Really appreciate if you could explain a little more.

  To run a quick installation, you need the correct DISPLAY see RapidWiz, and it would work with VNC (not with PuTTY). If you can set the DISPLAY is PuTTY (question xclock to check) then you can use (which I think is not possible).

  Thank you
  Hussein

• Hyperion Planning 11.1.2.4 - quick installation

  People,

  I am doing a quick installation of 11.1.2.4. I got the URL below for Oracle installation guide. Just a small problem. I am unable to find 11g Release 2 database. Instead of this version can I use the personal edition available for download (12 c)?

  PS: I tried to download Oracle 11 g Release 2 directly from Oracle's Web site and tried to install it. He failed.

  Fast deployment of Oracle Hyperion Planning in Development Environments

  Kind regards

  For quick installation, you really need to stick to the version in the documentation as it installs and configures the database.

  Delivery of Oracle software, select Oracle database standard edition, then you can select Exit 12 c as alternative

  

  

  See you soon

  John

• Loading new software via the quick installation problems

  I bought 2 programs to load on my Z22, the first load without problem, using a quick installation. The second cannot be loaded.

  I move the. Install files of people's Republic of CHINA in Rapid and then sync, it freezes, the cancellation does not work and ultimately (after about 45 minutes), I rebooted the Plam and stopped the application on the PC.

  I moved the. CPP on and it syncs successfully, then put it back and the same thing happens.

  On the Z22, I notice an installer of SM, and if I click on it I get a launch error "the application cannot be started due to a system error"

  The program is Solitaire Mania

  Can anyone help?

  Hello!

  Deleted that app install SM of the PDA and try reinstalling Solitaire Mania again via Quick Install.  Also make sure you have 5 MB of free space on your device.

  Message is about: Treo 650 (unlocked GSM)

• Zire 72: Quick Installation is broken after software re - install.

  I bought a Zire 72 on eBay a while back that came with no CD. I downloaded and installed the crippled version of the software that is available online. But recently, I discovered that one of my friends owns a Zire 72 she bought nine - and she lent me the installation CD.

  Now, the Quick Install icon which is on my desk does not work. He takes me to the screen "what kind of program you want to use to open this file.

  I am not able to view the properties of this icon, I can all the other icons, folders and shortcuts on my desktop.

  I tried dragging an audio file on the icon. It is apparently went there, but when I have hot-sync the device, the audio file did not show the unit.

  Peripheral is a Zire 72, OS is Windows XP SP3, method of synchronization is the USB cable and the version of Palm Desktop software, if it's important, is 4.1.4.

  Oh, and when I tried to re - run the installation CD that was loaned to me, I got the screen with the options to install additional software, a ride, or register my product, rather than repair or reinstall any part of the software.

  Suggestions?

  I have the installation CD, found a CONFIGURATION "explored." Exe in a very counterintuitive place, running and selected the option 'repair' installation.

  After this has been done, and I restarted... Quick installation now works.

• Installation of R12.0.4

  I have a certain stage of the Linux R12.0.4 installation forl platform. I just want to know if the same thing can be installed on Linux x86_64. that is, if the installable for R12.0.4 are the same for linux x 86 and x86_64, or I need to get different installable for my 64-bit system.

  Hello

  You need to get a pack of different media for Linux x 86-64. In addition, the list of pre - req. OS and software are different.

  Note: 402310, 1-Oracle Applications Installation and Notes of version 12 (12.0.4) for Linux (32-bit) upgrade
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=402310.1

  Note: 416305.1 - Installation of Oracle and Applications 12 (12.0.4) for Linux (64-bit) upgrade version Notes
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=416305.1

  Kind regards
  Hussein

• Fix missing for EBS R12.2 quick installation?

  Hi all

  EBS R12.2.4

  RHEL 6.5

  An Oracle Consultant installed the VISION instance to Assistant Rapid aid for our demonstration tests.

  After that, I was task to install the instance of CRP to help Assistant Rapid to start at our facility to the CRP/test.

  To my dismay, some functional test gets the error in CRP but runs well in the VISION.

  I think I have missed a few major patches or applied the wrong patch when installing apps?

  How can I check which patch is missing or poorly implemented, by comparing the two instance?

  In comparison, there are ins invalid objects CRP which is VISION valid example is the package APPS. IBY_VALIDATIONSETS_PUB

  The cause is the incompatible table IBY_DOCS_PAYABLE_VAL_GT of the CRP and the Vision which have different structures. There are some missing columns in CRP:

  INT_BANK_BRANCH_TYPE
  EXT_BANK_BRANCH_TYPE

  Please help how to find the patch that will fix these inconsistencies of table.

  Thank you very much

  JC

  I don't know how to continue without instruction, like another note asking to apply this hotfix. I would try to apply the fix in normal mode (when I have no time constraints)

  Want to logging than an SR can help solve the problem more quickly.

  It's interesting too https://blogs.oracle.com/stevenChan/entry/ten_ways_of_using_isetup_to_st

  Have not worked on it yet, but your comparison question sparked an interest for ways to compare the instances

• Errors related to BSE quick installation 12.1 RW-500015 HTTP

  Hello I am trying full EBS 12.1.1 on RHEL 5.8 64 bits of the operating system using the Quick Setup program.
  
  I get the following errors on the control screen after installation and I have been unable to solve these problems. Any suggestions would be greatly appreciated!
  
  Thanks in advance.
  
  
  RW-500015 error: listener HTTP does not
  RW-500015 error: Server HTTP virtual directories does not
  RW-500015 error: Login Page does not
  RW-500015 error: Help Page does not
  RW-500015 error: JSP does not
  
  Published by: 917901 on March 12, 2012 08:45

  Hello I am trying full EBS 12.1.1 on RHEL 5.8 64 bits of the operating system using the Quick Setup program.

  I get the following errors on the control screen after installation and I have been unable to solve these problems. Any suggestions would be greatly appreciated!

  Have you completed all the steps according to the (Oracle E-Business Suite Installation and upgrade 12 Release Notes (12.1.1) for Linux x 86-64 [761566.1 ID])?

  RW-500015 error: listener HTTP does not
  RW-500015 error: Server HTTP virtual directories does not
  RW-500015 error: Login Page does not
  RW-500015 error: Help Page does not
  RW-500015 error: JSP does not

  It is a common mistake - please check the files Setup logs for more information about this error.

  R12 Post Installation steps: Apache fails: RW-50015 cannot load Libphp4.So, unresolved symbols [ID 736689.1
  Fresh R12 Installation fails with RW-50015 [ID 452101.1]
  R12 Rapidwiz Postinstall steps Http, JSP, connection, the virtual directory page, Help Page fails [414414.1 ID]
  Is it Ok to have a hyphen in the host name or domain for Oracle Application 12.1.1? [ID 1347448.1
  Could not load program FNDPSTAX, rtld: 0712-001 symbol nzospRandNum [1100836.1 ID]

  Thank you
  Hussein

• installation of R12 on IBM AIX 5.3

  Hi all;
  
  I want to install r12 on IBM AIX 5.3. I am looking for documentation and found this one of metalink:
  
  Topic: installing Oracle Applications and Notes of upgrade version 12 (12.0.4) for systems AIX Doc ID: Note: 402306.1
  
  Is any one advice me another document or web site that is explains r12 installion pic of Pentecost etc...
  
  Thanks for the tips
  
  Concerning
  HELIOS

  The document should be sufficient. Just make sure that you have all the software of pre - req. and packages installed before you start the installation.

  In addition to this note, you can see [Oracle Applications Installation Guide: quick help install | http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120oaig.pdf]

• Cooler help: Installation of R12 and useful links to study materials

  Hi all

  I am trying to learn functional R12. Could any body point me links R12 Vmware installation as well as any favorite studies helpful material links, I'd be really grateful that.

  Thank you and have a nice day

  Concerning

  RAMU

  The simplest option would be to install Virtualbox, and then download and import the 12.2.4 Virtual Appliance - https://blogs.oracle.com/stevenChan/entry/e_business_suite_12_2

  Also google for my blog for detailed steps

• Installation of R12.2.4

  Hi hussein and all,.

  EBS R12.2.4

  RHEL 6.5

  I want to install ebs r12.2.4 and based on Doc-ID 1330701.1

  Software requirements

  The following maintenance tools must be installed on all machines and their locations specified in the path of the account that is running

  Installation fast and in the path on the account that will own the database layer and the application layer of file systems.

  • AR
  • CCG
  • g ++
  • ksh
  • LD
  • linux32
  • do
  • X display server

  How will I know if my server these tools is already installed?

  Thank you very much

  MK

  Question " " command to check. For example, "making". You can usually find these utilities under the directory ' / usr/bin '.

  Thank you

  Hussein

• Utility to do validations/controls pre-required for the installation of R12?

  Hello

  ENV: Oracle Linux 32-bit 5.8, Oracle EBS R12 (12.1)

  Is there a utility of Meta Link that I can run to check if all the prerequisites are met for the installation of Oracle EBS R12 on Oracle Linux 5.8 32-bit?

  What is the name of the utility?

  Best regards

  Hello

  Regarding your checks of preinstallation of the original question, have look at GDR - health check / Validation Engine Guide (Doc ID 250262.1)

  There are sets of different rules for different OS that you can use to check if all the conditions are met before installing

  You can consult the mos note "R12.1.1: Installation of Oracle E-Business Suite and upgrade Lotus Notes version 12 (12.1.1) for Linux x 86 (Doc ID 761564.1)" and install the needed packages from your installation media (most of the packages are available on the installation media, oracle has provided a separate link for those not available)

  If yum does not properly check out this (you are on 32 I doubt there is one for 32-bit)

  Index of/repo/EnterpriseLinux/EL5/addons/x86_64 /.

  Concerning

  SANAE

• DB Quick Install EBS R12 version

  Quick R12 install DVD that I own contain the 12.1.1 asks and the 11.1.0.7 database. Y at - it a newer version of the quick R12 install that contains a newer version of the Oracle database, as support for security 11.1.0.7 patch is no longer available unless you have first support.
  
  Thank you!

  user4434301 wrote:
  Thanks Hussein, it was very helpful. Does make sense to you, if they want to remain secure, the data bases, or do you know if there are plans to release a version installed with a new version of DB?

  Oracle won't release a new package of support for 12.1.x with a superior version of the database, and the next Pack of media that will be available for release 12.2.

  You must upgrade the database to the latest version 11.2.0.3 and the application to the 12.1.3 - I think that you are aware of the docs/resources to do this upgrade, if it is not indicate this and I'll post the links here.

  Thank you
  Hussein

• Lack of oraInst.Loc and oratab after the installation of R12.1.1

  Hello
  
  I installed R12.1.1 on x86_64 OEL and it is successful.
  Its working fine, I am able to connect to applications and run all the utilities.
  
  Just out of curosity, I went in my "/ etc" and I have found no oraInst.Loc nor I have found no "oratab" in "/ etc".
  
  I used 'oracle' user to run the rapidwiz. R12.1.1 is installed as a single node installation. Hence the name of group 'dba' and the 'oracle' user name are the user name and the groupname. Linux root user is stil intact.
  
  As we used to run the script 'root.sh' after installing the database software, which allows to create the "oratab" in "/ etc", we do not run here.
  I think that there is no need to launch 'root.sh"after installation because it is built into the rapidwiz.
  I discovered oraInst.Loc in the oracle home database and that it points to the location of the inventory. I found the inventory in the location pointed to by the oraInst.Loc. But what about oratab?
  
  I'm doing something wrong?
  
  Help, please!
  
  Kind regards
  Udit

  As we used to run the script 'root.sh' after installing the database software, which allows to create the "oratab" in "/ etc", we do not run here.
  I think that there is no need to launch 'root.sh"after installation because it is built into the rapidwiz.
  I discovered oraInst.Loc in the oracle home database and that it points to the location of the inventory. I found the inventory in the location pointed to by the oraInst.Loc. But what about oratab?

  You need not run root.sh as part of RapidWiz.

  You must create an oraInst.loc according to the (Oracle Applications Release Notes, Release 12.1.1 [798258.1 ID]).

  To/etc/oratab, you can also create it manually.

  Thank you
  Hussein