& quot; This change would require an amendment to the code that is locked by a model or a translator. & quot;

Similar Questions

• "This change should change the code which is locked by a model or a translator. The ch

  Comes now when I upgrade to 5.5 CS6 I even get when you use a template! My site is built using models, so it's very annoying - should I this forward when you use CS6?

  It seems that one of the models I use was the cause of the problem. I deleted

  He and recreated a new - seems to have solved the problem for now.

• This change should change the code which is locked by a model of translator.

  Hello

  I see a lot of the same questions.

  In my case however I do not use templates, or translators in my folder.

  I use several files included, but they have inside their head or body tags.

  The message popped up when I tried to convert this file:

  The international book of lymphedema: adaptation

  in Dreamweaver HTML strict xhtml 1 transitional.

  What can be the problem?

  Thanks in advance,

  Yvon

  I made the change without no problem, as you can see here.

  However, when I make the change, have a look at the errors that are created.

  When I change to HTML5 instead, have a look at the errors.

  Today the standard is HTML5, so I would stick to that.

  Apparently, there's a huge fest in Elburg, the days of kick. Was there two years before and well appreciated.

• Police are present on the system but requires an amendment of the provision

  When I open my psd file, it says that some layers of text should perhaps be updated. When I press the update button I get the message 'Selected thwart the course of the last operation. If the problem persists, please turn off the police. If I click on 'no', the file opens, but all text layers has an exclamation point and a ScreenTip that says "police are present on the system but requires an amendment of the provision.

  I create the PSD file using the version Adobe Photoshop CS6 (downloaded from the adobe.com site) track. This trail has expired so I just purhased Photosop CS 6 (Adobe.com). Before installing the version I purhased, I uninstalled the trail version.

  I don't understand this. It the same computer and the police is a police system that comes with the operating system (Windows). I can't create all new layers of text.

  If create a new PSD file I get the same message "Selected are"failed during the last operation. If the problem persists, please disable the fonts' when ever I try to create a new text layer.

  I have installed all updates.

  Any idea?

  Photoshop uninstall, reboot, reinstall solved the question :-)

  Operating system is Windows 8 (x 64) and the police I Segou UI

• The content of my site is misplaced and shrunken Apple desktop devices. The browser provides information on devices, but the content do not place nor scale properly. The reason for this problem would be failure to adjust the size of the browser in Muse? I

  The content of my site is misplaced and shrunken Apple desktop devices. The browser provides information on devices, but the content do not place nor scale properly. The reason for this problem would be failure to adjust the size of the browser in Muse? I conceive on a 23 inches HD Windows desktop base. My site is displayed as it should, except on Apple desktop devices.

  This may depend on several things as if contents are pinned, scrolling is applied etc.

  Try to resize the browser preview in the Muse for verification, site url will help you to study.

  Thank you

  Sanjit

• remove this line if you want to edit the code by hand? uh who's online?

  Several of my pages are locked and I don't know why. As I work in the code, I remembered that I modified a text in a SendEmail by directly editing the page rather than to use the server behavior. Do not understand why that would matter, but whatever...

  Now I wonder if that is causing the problem, I ran across this commented line in the code:

  remove this line if you want to edit the code by hand

  But they talk about the line just after //remove this line or they mean the actual comment line

  remove this line if you want to edit the code by hand?

  Thanks for your help

  Given that you post the code no, others can only guess, but I would have thought that it is pretty obvious that removing a comment will make no difference for the execution of a script. This means almost certainly remove the Next line.

• When I start most of the programs that is lock and on the taskbar it says program does not. How can I stop this from happening?

  When I start most of the programs that is lock and on the taskbar it says program does not.  How can I stop this from happening?

  Original title: Windows Explorer

  It is a good number with a boot drive (C:\ drive) that is cruelly of free space.

  A healthy walk NEEDS 20% free space at least to work properly and prevent your suspension system.

  Several causes are possible, but check your free space. Upgrade your hard drive if necessary.

  More RAM might help too.

  Check these before you attempt to update or install anything more.

• "Error - a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner"while trying to scan using HP G4050 on windows 7

  A problem prevented the document are analyzed. Windows 7 - HP G4050 scanner.
  I have a HP G4050 which worked fine with Vista.  After the upgrade to Windows 7, I get the following error when scanning:

  A problem prevented the document are analyzed.  Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner.

  I get a different error during an attempt of an overview.  It starts to get an overview of the page, gets about 2 inches to the bottom of the page and then I get the following error:

  An error occurred when you set the properties of the scanner.  If another program is scanning, please wait to complete, and then try again.

  I downloaded the latest driver (and reinstalled several times) of HP with no luck.  No errors are recorded in the Application events.

  I'm going nuts trying to figure out this one!  Thanks for your help.

  BT

  Update:

  I finally had time to unplug the scanner, wait 60 seconds and then plug it again.

  Problem solved.

  Scan of stupid...

  BT

• Hi, I format the computer, I would like to know how the applications that I have, if I am already registered and then downloaded again...?

  Hi, I format the computer, I would like to know how the applications that I have, if I am already registered and then downloaded again...? !@

  If you have a cloud account/subscription and then sign up before formatting.  If you have a Creative Suite software license then before you format you must disable all the different suites opening one of the applications and selecting help-> Deactivate

  The actions above will help make it easier for the reactivation of your subscription access/suite when you reinstall after format is done and your system restored.

• Hello, I would like to talk about the iPhone that I don't have.

  Please help me, please hear me out until the end, I live in Ukraine (just there is no choice) I got iphone 5 gray area, I lost it somewhere, then went to the police and wrote to declare that you have lost it, they asked the documents that I gave them, but half a year later that they are not returned to me neither documents nor the telephone not found , so I would like you to understand my situation and really I would that you gave me a new iPhone 4 at least, I just really respect your products and love, without he cannot live, but as of the Ukraine with these wars, I don't have to buy a new and I would like that everything that you gave me a new you're the richest company in the world of electronics and among the most intelligent, I think that if you help me and give me a new iPhone you will become bad company? If the Manager is reading this, could you show this message to the main office if you can help me further? I really really want the iPhone.

  No Manager or an Apple employee will ever read this message because you post on a forum of support technique user at-which you were informed in the terms and conditions of this forum you agreed before joined you or you have not bothered to read?

  If you want a new iPhone then go out and buy one as everyone should.

• Is this a bug in Dreamweaver? Because the code is correct! Please advise!

  Hey coders.

  I'm pretty new to Dreamweaver, but have a decent understanding of the code and if I ever got stuck I usually figure out on my own, but today are not the case.

  My problem is: when I enter the code it didn't display correctly in my workspace, the slice falls completely down, when it should have been in the middle. But when I make it with the browser, it displays correctly! ???

  You can see my site here's progress to:

  http://www.topvizstudio.com/webproblem/index.html

  or you can download sliced HTML and Image here:
  http://www.topvizstudio.com/webproblem/index.html

  Please help, it is just killing me, I've already lost 2 hours trying to figure it out!

  Thank you!

  -Serge

  Design view is not 100% reliable.  What matters most is how your pages make in all the major browsers (IE 6,7,8, FF, Opera, Safari/Chrome...)

  The last picture is 500px wide and floating to the left, and yet the previous images are quite a bit more small. This leads me to think there isn't enough available on the page width to account for this installment.

  In addition, I do not understand why you are using may inline styles both in your HTML code.  This will make it much more difficult lifestyle changes later because your styles are not separated from the content.

  You must delete a semicolon after your image file names.

  Finally, your code has a typical beginner problem called division-it is.  In contrast to the provisions based on a table where each element is contained in a table cell, CSS layouts, there is no need to place each element on the page within its own division. In fact, it is often best if you do not.  Less increase in the code.

  image
  

  image
  

  image
  

  Review this 3-part tutorial. I think it will help you.

  Taking  a Fireworks (or Photoshop) comp to a CSS based layout in DW

  http://www.Adobe.com/devnet/Fireworks/articles/web_standards_layouts_pt1.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com