rant of test sites

Similar Questions

• Global correlation test site

  Hi people,

  I try IPS 7.0.1 and global correlation on one of my small remote offices, but I want to confirm to happen in fact malicious traffic before rolling out to 15 + other sensors.

  I have configured the sensor and used 'see global Stats' and 'motor show in stat analysis' to ensure that I get the latest databases.

  However, as I said it is a small office and (fortunately) there is no malicious traffic to the IPS sensor to drop. I'm kind of in a catch-22 here.

  I was about to set up a test PC to use the remote desktop proxy server (so through its traffic in the IPS sensor) and then try to hit certain known malicious domains. This, of course, runs the risk of infection and is in any way random.

  There are test sites or IP addresses in the Ironport database that I can use to prove that his work (a bit like the EICAR virus test file)

  Something like testGC.ironport.com which goes to a single unused IP address somewhere.

  If this is not the case, can you guys add? It would certainly accelerate our deployment process and may be useful for TAC, also. This could also be used by the filter of the botnet ASA.

  Thank you!!

  Now I understand more what you need.

  It's good for us customer feedback.

  I entered an enhancement request to add a command to test connectivity from the sensors to the overall correlation servers. Thus, it can be considered for a future version of the IPS.

• Is there one GUI, other than Assistant Deputy Ministers, and the CSM for test site vpn to ipsec tunnels on an asa5505/asa5510?

  Is there a GUI, other than the Assistant Deputy Ministers and the Security Manager cisco IPSec of Cisco ASA5505/5510 test site to vpn tunnels. I usually go through the steps listed in here in the link below in the terminal window, but it sucks when you have several tunnels to keep abreast of.

  http://www.nwdump.com/troubleshooting-IPSec-VPN-on-ASA/

  I would have preferred one that works with Freebsd or LInux, as the cisco security manager CSM v4.1 is limited to only current running on windows server 2008 ent.

  Thank you

  Jason

  No, for troubleshooting the best way is to use the CLI that will give you debug output on where it is lacking.

  For configuration, outside the CLI, ASDM and CSM, unfortunately there is no other tool that works on Linux/Freebsd because it is more specific orders of the ASA and only limited to the CLI, ASDM, or CSM.

• Implementation of Cisco C60 for a test site

  Hi all

  I have two C60 codecs, sitting on the same network (not provisioned, not set up for video conferencing).

  Could someone please explain how to set up these two codecs for a VTC test site? I found a few sites testing, IPs, etc, but I don't know what to Setup. The advanced on the device configuration page is not very helpful.

  These two devices can call the each other without some sort of setup of service? I'm fairly new to this area, so I really appreciate your help on this.

  Thank you

  Sinan

  Hello

  First ping the end this codec the codec you use for membership and see if you get resonce.

  SystemTools network ping xxx.xxx.xxx.xxx

  If you have found answer then use suite commnad ro dial.

  xcommand Dial Number: xxx.xxx.xxx.xxx Protocol: h323

  HTH

  Kind regards

  Dharmmesh

• Test site on Businesscatalyst - my client do not

  My site has been loaded for the test on Businesscatalyst and I can see it in Safari.  However, I have advised my client to view it in Google Chrome and it doesn't seem to be forthcoming.  I also tried Google Chrome and default Web site name always to something else.

  I understand, it is that once I have download the test site, a client must be able to put in the details of the search and check out their Web site.   Is it not the case?

  Thank you

  Hello

  Thanks for your help.  I was able to pass the address of the exact business catalyst, but it did not work.  However, my client has seen since the website from my computer and all is well.

  Thanks to you all.

• Hello, I am a newbie to Muse.  How can I have my ftp site up to my host to a test site I can give my client a link to see the site proposed he become?

  Help, please! Hello, I am a newbie to Muse.  How can I have my ftp site up to my host to a test site I can give my client a link to see the site proposed he become?

  Hello

  Please use the following link to see how to publish Business catalyst, Muse site

  Adobe help Muse | Publishing Web sites

  Publish content using Muse

  Let me know if you have any additional questions.

• When you create a test site does immediately go live under the URL it creates?

  Hello world

  When you create a test site does immediately go live under the URL it creates?  "... / [websitename}.businesscatalyst.com' if I paste the URL and try to view the Web site on another computer, it says there isn't.]". It can be accessed by the customer in line once the site is upgraded to a paid subscription?

  Its visible Sam - Yes.

  What is the URL in question?

  If you have the right URL and have something on this test site you can view it.

  The site is entirely live? No, you must pay for it full functionality and have the ability to set your domain to it.

• How to make a Test Site with Muse in British Colombia?

  How to make a site to test with muse in British Colombia?

  I'll answer my own question. You go to file > publish > name a name of test site.

• How do you disconnect site publish when you use a copy of test site?

  To sort a solution for accessibility, I made a copy of the file live Muse called 'Test' and made my Michio on that. However, how can I Disconnect this copy from the Web site online that I could click on publish accidentally not realsing I in the test site and it synchronize with the online site (which he also tries to do when I open the 'testing' file of Muse also pending changes were made to the live site). In other words, I want to Muse to treat this copy as a new one, not a variant of live, but I can't find anyway to do inside the Muse?

  Publish the test of the site to a new site of the trial of BC (for test) so the next time you press the button publish accidentally, it connects to this newly created test site.

  Thank you

  Vinayak

• Test site

  I downloaded my Muse site on an external server. However, the favicon does not appear and the tab says Test Site. Where can I change this?

  Take a look at the couple of threads here that are very likely to respond to your request on favicon not display or update.

  http://forums.Adobe.com/message/5213784

  http://forums.Adobe.com/message/5448728

  If the above does not help, a site URL would help to identify the problem.

  Thank you

  Vinayak

• change or remove the test site url domain name

  Hi guys ive put up a site and pointed out the new url for the site and it works great. http://www.ceramicplanet.co.UK/

  However, when I search on google for the site, the original name of the test site seems to appear before a new and his ugly http://ceramic-planet2.businesscatalyst.com/

  I've been on admin, manage domain names, but it won't let me change the name of test or remove it. Is there anything I can do so that the new area shows and not the field of ugly test site.

  Thank you

  Dave

  Hi Dave,.

  You can't do that.

  First someone related to the site or registered it with google, so it manifest. This can be avoided during development.

  You cannot delete or change the URLS development, BUT if you click on edit, and in the context menu, you will see a box talking to redirect to the direct field.

  Check this and your done and gives google some time to ignore the development URL.

  You can do small things "Helps things along" is a link to default cononical for your main domain of your models and the new option disavow in google.

• How to change a plan? (test site)

  Hello

  I have a site of trial on a basic plan. Y at - it an option to change the basic plan, as well as in the trial or do I need to create a new site and copy the existing?

  Thank you

  Micha

  Hi studiomigo!

  Since it is a test site, we help you actually switch the site map for you.

  You can contact us via chat support or case and provide the URL of the site in question.

  - http://www.businesscatalyst.com/support/request

  Kind regards

  -Sidney

• In the edition of browser with test sites

  Hello

  When I build sites with Muse I download using a FTP application on my own server and place them in a folder named test or something similar. Can I send a link to that whether informing them that the site is available for consultation.

  for example www.mydomain.com/clienttestsite/

  www.mydomain.com was built with Muse and uploaded to my hosting to help Upload of Muse FTP server.

  In the edition of the browser does not work when I followed this method.

  Is it possible to use in Assembly browser when sites are downloaded in this way?

  CY

  You can do this, or you could simply click on "Publish" and use a free temporary site on Adobe Business Catalyst. Temporary sites are not indexed by Google so only you and the writer would know the URL of the site of temp.

• test site will publish is no longer in Business Catalyst?

  I was a site of Muse and published the site of test to Business Catalyst for several months with no problems. Today I started getting the following message is displayed:

  'Access using your Adobe ID has expired. Check your network connection and try again. »

  -J' have a good internet connection at high speed.

  -J' raised Muse without result.

  -J' even rebooted my whole system.

  Same result?

  
  

  I use a Mac Pro on OS X Yosemite 10.10.3 and using the latest version of Adobe Muse CC (2014.3)

  
  

  HELP please.

  
  

  THX,

  Ken Lomas

  
  

  Bullet Design Group

  225 978-9588
  

  Hello

  In Adobe Muse, go to the Help menu-> log out

  Restart the Muse

  Republish. This should solve the problem

  If the problem persists please let me know.

  Concerning

  Vivek

• Hello, I'm trying to publish it on my test site,

  Hello, I'm trying to publish my site test, all very well until this morning, when I get this message... Internal error: 400 Bad request. (117007)

  Hello

  Please read the following forum:

  Error: Application error internal incorrect 400 (115000)

  Re: Internal error: 400 Bad request. (115000)

  Muse Publishing Error

  It will be useful,

  Sonam