Implementation of Cisco C60 for a test site

Similar Questions

• Is there one GUI, other than Assistant Deputy Ministers, and the CSM for test site vpn to ipsec tunnels on an asa5505/asa5510?

  Is there a GUI, other than the Assistant Deputy Ministers and the Security Manager cisco IPSec of Cisco ASA5505/5510 test site to vpn tunnels. I usually go through the steps listed in here in the link below in the terminal window, but it sucks when you have several tunnels to keep abreast of.

  http://www.nwdump.com/troubleshooting-IPSec-VPN-on-ASA/

  I would have preferred one that works with Freebsd or LInux, as the cisco security manager CSM v4.1 is limited to only current running on windows server 2008 ent.

  Thank you

  Jason

  No, for troubleshooting the best way is to use the CLI that will give you debug output on where it is lacking.

  For configuration, outside the CLI, ASDM and CSM, unfortunately there is no other tool that works on Linux/Freebsd because it is more specific orders of the ASA and only limited to the CLI, ASDM, or CSM.

• Are the five sites of free creative cloud only for the test?

  Are the five sites of free creative cloud only for the test?

  Hello

  No, you can add your own domain name to these sites and use them like any other normal site. Let me know if you have any specific doubt, and I will try to answer,

• I get a JavaScript Application error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  I get a pop up box with the message: Application JavaScript error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  But it seems to appear when I go to Amazon.com. Then he opens with this message and the OK option? But as fast as I can click OK, another box appears. After all a half dozen, she disappears - until what I move to another part of Amazon! I uninstalled - reinstalled and then - Firefox and BA. I do not understand this!

  (And of course, there is always the possibility that it is not only attacking me on Amazon... There may be a lot of other sites that also trigger, and I just haven't been there yet.)

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Global correlation test site

  Hi people,

  I try IPS 7.0.1 and global correlation on one of my small remote offices, but I want to confirm to happen in fact malicious traffic before rolling out to 15 + other sensors.

  I have configured the sensor and used 'see global Stats' and 'motor show in stat analysis' to ensure that I get the latest databases.

  However, as I said it is a small office and (fortunately) there is no malicious traffic to the IPS sensor to drop. I'm kind of in a catch-22 here.

  I was about to set up a test PC to use the remote desktop proxy server (so through its traffic in the IPS sensor) and then try to hit certain known malicious domains. This, of course, runs the risk of infection and is in any way random.

  There are test sites or IP addresses in the Ironport database that I can use to prove that his work (a bit like the EICAR virus test file)

  Something like testGC.ironport.com which goes to a single unused IP address somewhere.

  If this is not the case, can you guys add? It would certainly accelerate our deployment process and may be useful for TAC, also. This could also be used by the filter of the botnet ASA.

  Thank you!!

  Now I understand more what you need.

  It's good for us customer feedback.

  I entered an enhancement request to add a command to test connectivity from the sensors to the overall correlation servers. Thus, it can be considered for a future version of the IPS.

• VoIP QoS for Tunnel from Site to Site

  Hi all

  I need help to configure QoS for VoIP between two Cisco ASA 5505 with VPN Site to Site.

  There is no need for bandwidth reservation, only 46 (EF) DSCP should be higher and DSCP 26 second queue higher and rules apply only to a site to site VPN.

  Usually, I try to configure the ASAs via ASDM and discovered in the documentation Cisco how configure QoS DSCP bits with a Service policy and how to configure QoS for a VPN from Site to Site (rule Service-> Match traffic strategy). But how to configure QoS for a bit DSCP applies to Tunnel from Site to Site? And how configure different priorities for both DSCP bits, this is defined by the order of political Service?

  The quality of service must be activated on the two ASAs to inside interface?

  Thanks in advance

  Tobias

  Like most-

  class-map voice_traffic
  match dscp ef
  match dscp 26

• Tripartite Cisco C60 or C90 Cisco Conference

  Dear Experts,

  Cisco C60 or C90 of Cisco, codecs that have key MultiSite option allows to display image on screens separate the multipoint Conference, for example to display each participant on a screen connected to the codec during three separate?

  Your prompt response is much appreciated.

  Kind regards

  Nick

  Yes, you must use the composting and the TC console features. See attached link...

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC6/tc_console/codec-c-series_tc-console_tc60.PDF

• Test site on Businesscatalyst - my client do not

  My site has been loaded for the test on Businesscatalyst and I can see it in Safari.  However, I have advised my client to view it in Google Chrome and it doesn't seem to be forthcoming.  I also tried Google Chrome and default Web site name always to something else.

  I understand, it is that once I have download the test site, a client must be able to put in the details of the search and check out their Web site.   Is it not the case?

  Thank you

  Hello

  Thanks for your help.  I was able to pass the address of the exact business catalyst, but it did not work.  However, my client has seen since the website from my computer and all is well.

  Thanks to you all.

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• How to specify an Apple Web Clip icon for a muse site

  I'm really looking forward to have an icon of my Muse site web clip, so that a link from Favorites Safari displays an icon dedicated, and therefore add my Web page to a home screen iOS.

  I found a paper developer Apple detailing how to specify an image. I created the image, but am not sure how (if possible) to Add this code to the Muse and so do Safari knowing that my site has a picture of web clip.

  Here is the link to the instructions from Apple: <Configuration of Web Applications>

  Can someone help me to follow?

  To follow this guide, you would need dw in order to access the root document... Muse will put all assets in the folder liabilities by default if you have only Muse so this is where your file "apple-touch - icon.png" will end.

  I does not have an Apple for the test, but can't see a real problem with just point to the new location of the file in your link?

  becomes

  and you still change the 'custom_icon.png' to all what is called your icon...

  PS, I'll try to put the code of the link in a slot of megadata master page first for speed if you do what he on everypage.

• When you add a new site, Keychain prompt for all existing sites

  With 2015 CC update, when I add a new Dreamweaver site, as soon as I hit him "done" once all the ftp information is entered, I get a prompt Keychain for each existing site, I saved in Dreamweaver: "Adobe Dreamweaver CC 2015 wants to use your confidential data stored in 'Sitename-SiteServer 1' in your keychain. You want to allow access to this point? »

  I was well with crossed the first steps, assuming it wouldn't ask me once again, but he does. Every time.

  By clicking on 'Always allow' vs. 'Allow' does not seem to do much, but I don't want to test it a lot because I have to go through 80 + sites every time to see if it changes anything.

  Any experience with this? Is it a thing of access door key or a thing of Dreamweaver?

  The note of the problems at the FTP credentials won't be remembered is NOT my problem. All credentials are stored; I can switch between all sites without problem, or any guest. This happens only when I add a new site.

  Any help would be greatly appreciated!

  Dreamweaver CC 2015

  Screen Retina MacBook Pro mid 2012
  Yosemite 10.10.3

  This will help to get rid of it helps Dreamweaver | Set up a test server

• When you create a test site does immediately go live under the URL it creates?

  Hello world

  When you create a test site does immediately go live under the URL it creates?  "... / [websitename}.businesscatalyst.com' if I paste the URL and try to view the Web site on another computer, it says there isn't.]". It can be accessed by the customer in line once the site is upgraded to a paid subscription?

  Its visible Sam - Yes.

  What is the URL in question?

  If you have the right URL and have something on this test site you can view it.

  The site is entirely live? No, you must pay for it full functionality and have the ability to set your domain to it.

• rant of test sites

  As I continue to explore the possibilities of Business Catalyst, I bought a deal of recent model of Tribevita. I downloaded their models, which in turn zaps the amount of test sites (max 100) available to create new tests of Muse site or test sites that I might want to create British Colombia.

  I am a free partner... How are we supposed to test the limit of 100 BC environment?

  So I was told I have to DELETE the models that I downloaded for free trial site space, which is ABSURD. In the meantime, I have to pay for a subscription to creative cloud, where I use Muse to mock designs, but I can not the trial of the site anything more because the models I downloaded used what spots to the top.

  What I'm missing here, BC? We are really supposed to pay $995 for a partnership so I can use the Muse (who you mind I'm paying $50 / mo now, I can't use).

  Has anyone experienced problems of this kind? A d warning: If you do not buy models, hoping to use them in the future, they all count against the trial of max.

  Any ideas?

  Thank you

  It's not that kind of system, a model is not really a site and not the same thing as something you would get in wordpress for example.

  WordPress and Drupal are not like BC - they are different, it is not really a limitation, its just something that differs from a SAAS.

  BC models are NOT live, but trial sites or development take place, you can just do an infinite amount and stay forever, data and bandwidth for that is simply not viable.

  British Colombia is already full of ability, you still have to see through the Muse and models

• How do you disconnect site publish when you use a copy of test site?

  To sort a solution for accessibility, I made a copy of the file live Muse called 'Test' and made my Michio on that. However, how can I Disconnect this copy from the Web site online that I could click on publish accidentally not realsing I in the test site and it synchronize with the online site (which he also tries to do when I open the 'testing' file of Muse also pending changes were made to the live site). In other words, I want to Muse to treat this copy as a new one, not a variant of live, but I can't find anyway to do inside the Muse?

  Publish the test of the site to a new site of the trial of BC (for test) so the next time you press the button publish accidentally, it connects to this newly created test site.

  Thank you

  Vinayak

• change or remove the test site url domain name

  Hi guys ive put up a site and pointed out the new url for the site and it works great. http://www.ceramicplanet.co.UK/

  However, when I search on google for the site, the original name of the test site seems to appear before a new and his ugly http://ceramic-planet2.businesscatalyst.com/

  I've been on admin, manage domain names, but it won't let me change the name of test or remove it. Is there anything I can do so that the new area shows and not the field of ugly test site.

  Thank you

  Dave

  Hi Dave,.

  You can't do that.

  First someone related to the site or registered it with google, so it manifest. This can be avoided during development.

  You cannot delete or change the URLS development, BUT if you click on edit, and in the context menu, you will see a box talking to redirect to the direct field.

  Check this and your done and gives google some time to ignore the development URL.

  You can do small things "Helps things along" is a link to default cononical for your main domain of your models and the new option disavow in google.