Re: How to remove periodically the huge Events.log in $APPLCSF / $APPLLOG

Similar Questions

• How to write to the system event log

  Windows 7 Home Premium 64-bit Service Pack 1

  I run a daily work to create an image of my drive system hard. Repeatedly the work began and, due to a material error, be abandoned. In some cases (mostly), this will result in the image of yesterday being destroyed, leaving me with no viable image in case I need to restore. Although the reader is old enough (3 years), I'm not want to replace it, because I know no other activity that has had a problem with it and diagnoses reported no problem.

  So I want to execute a batch file or a script before the regular daily system backup operation. The script would go to a SMART short self-test, and if no errors are reported, would signal the backup task to run. Conversely, if the self-test report any error, the script don't trigger not the backup task to run. I think I will need to write an entry in a kind of system event log, which would be defined in the trigger condition in the entrance to the Windows Task Scheduler for the backup task. If anyone can help with the details of how to write an entry to a log of system events?

  Or, perhaps, there is better way to achieve what I want to do?

  I guess that there is not a very high probability that the script will always truly detect a problem and prevent the last image of the destruction. But I tell myself that it is worth the effort.

  TIA

  Assuming that smartctl generates an errorlevel nonzero in case it failed, the following script will work, as long as Smartctl is run under the same account as Casper.

  I also made your script more transparent control setting. The if/then/else/if/then embedded instructions are perfect for computers, but are often misconstructed by the human mind. I'm a big believer in the KISS principle.

  OFF @echo
  FOR %%d Ko (% Date %) Today SET = %% A

  SET now = time %
  echo =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
  ECHO% now %%d now %%d %2
  echo"=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.
  Si (« %3 « == » »
  echo of the provided insufficient parameters
  output/b 1
  )

  IF/i %1 is goto short Action
  IF/i %1 is goto long Action
  ECHO 1 Parm [%1] is INVALID
  output/b 1

  : Action
  smartctl t %1 %2
  the echo of SECONDS to WAIT for selftest %3
  choice/n/t %3/d N
  smartctl-l selftest %2%

  Set Flag="%temp%\Smartctl.log".
  If exist % del % % flag flag
  If %ERRORLEVEL% is 0 echo. > Flag %

  For the handshake to work, you must place the CASPER command inside a file of commands as follows:

  off @echo

  If exist c:\Casper\Casper.exe '% temp%\Smartctl.log '.

• How to remove all the photos from my iphone 5?

  How to remove all the photos from my iPhone 5?

  

  1. Open the Photos app.
  2. Click on the photo or video you want to delete.
  3. Type > delete the Photo.

  Delete several photos

  

  1. Open the Photos app and press Select.
  2. Click on each photo or video that you want to remove.
  3. Type > delete Photos.

  Delete photos on your iPhone, iPad and iPod touch - Apple Support

• How to remove all the pictures imported from my I phone 6

  How to remove all the pictures imported from my I phone 6

  Imported from the place where?

  If they were imported from your computer, you remove the same way that you put on there: by syncing with iTunes. to remove them, you need to synchronize an empty folder, or simply turn off the Photo in the form of synchronization option summary pane when the iPhone is connected.

• How to remove "around the web" pop ups?

  How to remove 'around the web' pop ups of Safari on my macbook air?

  Download and run Malwarebytes Anti-Malware: http://www.adwaremedic.com/index.php

  You can also remove the adware manually by following the steps provided by Apple: https://support.apple.com/en-us/HT203987

  After that, make sure that your default search provider is set to the one you always use. To do this, open Safari - Preferences - research.

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Also, I think it would be a good idea to install AdBlock.

• IP address conflict? How to solve this problem. Message on the screen. go to the system event log window.

  Next message on the screen for IP address conflict. There are two addresses. How to solve this problem. Message to say go to the system event log window. I can't. Pl help.

  A common situation that can lead to a conflict of ip address, it's only 2 (or more) computers or other devices are connected to the router (via ethernet or wireless), and both have ip addresses assigned by the router automatically, one of the computers, then past in mode 'sleep', and while we sleep the router restarts.  When the router comes back online he doesn't know the computer sleeps is here and that he already has an assigned ip address and so it gives the ip address of the other computer.  When the computer asleep wakes duplicate error will be triggered.  It can be solved by turning off computers and turn it back on so that the router will assign them new ip addresses.  If this is not what is happening in your situation, the following may help: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message

• How to create a rule of action to subtract from the Ips event log manager console express?

  How to create a rule of action to subtract from the Ips event log manager express console?, some unknown has a guide?

  Thank you.

  Sent by Cisco Support technique iPad App

  Hello

  http://www.Cisco.com/en/us/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml

  HTH

  Luis Silva

  "If you need IDP (planning, design, implementation) assistance do not hesitate to contact us.

  http://www.Cisco.com/Web/partners/tools/pdihd.html

• How can I make the past events using {module_booking}?

  How can I make the past events using {module_booking}? Filter = 'All' Render = 'All' seems to show only upcoming events. Any advice? Thank you!

  By the new engine rendering and the module_data.

• How to remove all the exhibitors?

  How to remove all the exhibitors of large document?

  I tried to use find/replace and then find format, but I couldn't find the Exhibitor box.

  In find/replace, in Format to find, go to the basic character Formats section and it is in the drop Position down to the right.

• How to remove (delete) the last blank page of the script?

  Is anyone of you know how to remove (delete) the last white page that appears in the script? My story is 126 pages long, but in the scenario (the document) 127 pages appear because the last is a blank page, how to erase this page? Thank you.

  You can try the following:

  -by pressing the delete key at the end of the text to page 126

  -Check if you have the ability to 'Unlock the Pages' in the Menu 'Production '.

  If you still face this problem, can you please save the document to disk (file > save to disk) and send us an email to DL-AdobeStory-supportadobecom, so that we can offer you a fix?

• How to remove "/ > of the upper left portion of this page"

  Hello! I would really appreciate if someone can check this page and tell me how to remove "/ > of the upper left portion of this page tks!?"

  Rolled sorour - multidisciplinary artist

  His entry on the line of code below in your page. I don't know what it is or what it does... something to do with Facebook? Never seen a " / >

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• Security-SPP in the Application event log

  Hello

  
  Since we installed the Agent Mirage to the Windows application log is filled with entries 'Security-SPP.

  I stopped the Service of Mirage and the flooding event log stopped also.

  Any ideas why this happens? Or someone at - it same problem?

  Thanks for your help.

  
  Cordially Sébastien

  
  

  Hi Sebastian,.

  The client of Mirage periodically polls WMI for Windows license information.

  This WMI query triggers an event log message. Because the Mirage makes this request every X minutes, you have more of these events in the event log.

  However, this event log is a log of the information only events. Although it appears several times, it indicates no problem with your machine.

  We already have an open problem on this in our backlog for fixing this behavior, I hope that this correction will be introduced in future releases.

  Kind regards

  Tal

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]