Re: Satellite 5200 701: unknown device in Device Manager.

Similar Questions

• Satellite 5200 701: which cable should I connect to PJ2 port on motherboard

  Hello world.

  Currently, I am trying to fix a laptop Satellite 5200 701. The keyboard and touchpad are both dead but see the place in the Device Manager.

  When I opened the folder, I found the motherboard has an empty on port marked PJ2.
  When I looked in to it that I discovered that this is a port to connect a cable that feeds power to the keyboard, so I think that's the problem.

  My problem is trying to find out what wire should be connected to it and what another port.

  If someone could help, I would be grateful.
  Thank you very much.

  Hello

  How can you come to the idea that the keyboard needs some extra internal powersupply? The keyboard has only one connector that is important, and this is the connector of the KEYBOARD. Only this and nothing else.
  If there is an empty port then it has nothing to do an extra wire must be connected or whatever.

  Another thing: If the keyboard and touchpad appear in Device Manager then why they do not work? Didn t you think a software framework could be the problem? Please try another operating system, a linux live CD might be a good choice to make sure that the keyboard and the touchpad are really not work.

  Simply reconnect the keyboard and then try a linux live CD (knoppix would be a good choice, but you can also try ubuntu) to check if it work s.

  Welcome them

• Satellite 5200 701: key FN and F5 not working

  Hello

  I've updated the Satellite 5200 701 XP Home, XP SP2 prof. Now I can't go to the projector to see the video with the FN and F5 keys.
  The nVidea Drive and the Hotkey Utility is installed.
  Wath are the error?

  Sorry for my bad English.

  Hello

  Have you checked the page of the Toshiba driver?
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  I checked and found a document that describes what to do and what application should be updated after SP2 update.
  There is also the utility Hotkey emulator for display devices. I think that this tool is important and you should try to install it.

• Drivers Satellite 5200 701 were?

  Hello, I have installed new windows xp on my satellite 5200 701 and I need some drivers... found some on windows update, but they were are the other? have you used this automatic search for toshiba on serch manuale of drivers on the support page and page? seems that my dosent satellite need drivers? can't find them anywere? and what abot the bios? no way to get there? I want to upgrade bios as well!

  the King håkon regradts.

  Take a peek inside

  [European Toshiba driver page | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  [Driver Toshiba Canada page | http://support.toshiba.ca/support/Download/ln_byModel.asp]

  [Australian Toshiba driver page | http://www.mytoshiba.com.au/support]

  [Toshiba American driver page: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp]

• Satellite 5200 701: FN keys do not work

  Hello

  I installed my Satellite 5200 701 with Windows XP. Everything works fine. My only problem is that the FN keys do not work. I downloaded and installed all the drivers available from the home page, but it still doesn't work. Can you please send me what kind of driver I need exactly? I also looked for a guide of installation but I did ' t find one to download? Sorry for the bad English, I'm from the Germany.

  Hello

  I put t know if you have the original Tools & Utilities CD for this camera. If so there must be advice that the common modules (V.5.03.00) must be installed as a first step, before you install any other tool or utility. This order of the facilities is very important because the common modules is a kind of module which is very important for the other features of the tools.

  Also check out this CD if there is some sort of html file with installation instructions. If you can't find anything please post again. Maybe we can find something to help you.

  Good luck!

• Satellite 5200 701: I can't use the TV-out more.

  Hello
  This is my first post on this forum. I have a Satellite 5200 701 for 3 years now. I can't watch movies on my TV. I could use this function in the past.

  Last November, I formatted my laptop with CD from Toshiba. As I didn't have a TV, I tried not using the TV function. But now that I have a (different) TV, I tried to use it without success.
  When I press Fn + F5, nothing happens. When I go to the selection of the screen, I can select the 2nd display but in "Advanced", I can't find the same features I've had in the past (before formatting). I don't have the Nview utility in "Advanced"...
  Is this a driver problem? NVIDIA, Toshiba or Microsoft? Problem of material...?

  I don't know how to solve this problem.

  Kind regards
  jimbow

  It cool s that you have solved the problem.
  Thanks for the information. It could be very useful for users of the Toshiba a different forum.

  concerning

• Satellite 5200 701: RAM problem?

  Hello

  After my last thread, I could somehow isolate the problem further.

  My Satellite 5200 701 boots Win XP correctly, but when it is lifted upward or to the smallest shake the screen freezes or displays the Win screen in strange colors. When I hit carefully on its underside after you have started successfully, it crashes immediately when I touch the part of the cover of RAM.

  So, I guess it has something to do with the RAM. However, both RAM blocks have been verified by Toshiba, as well as the HARD drive.

  Does anyone have a solution?

  1 million thanks!

  Hi Moritz,

  According to your description of the problem, it is most likely something made intermittent contact where your RAM modules are connected. Try to remove and then reposition modules RAM themselves (by taking the necessary precautions of antistatic property course) to see if that helps. Make sure that the RAM modules are in place and properly locked in place.

  You can also try exchanging the RAM autour modules so that they are in the bays of spare.

  If your problem persists, then it is likely that there is a bad connection between takes of the RAM and the motherboard connections.

  HTH

• Satellite 5200 701 does not start!

  I have a Satellite 5200 701. The problem started a while Win XP suddenly hung up, when I moved the PC from one place to the other. Then it got worse and now that the Toshiba screen appears and then everything stops. When I swith it turns off and try again the display will be turned off and only the lights of the system and the blue subscreen will light up.

  I send the laptop toward the center of German support and they apparently could not understand any problem. HARD drive and RAM have been tested as well as a test of effort for motherboard was made.

  Does anyone have another idea?

  Hello

  Well, this is a strange question.
  What do you mean by moved from one place to the other PC. ?
  Did you use a wireless connection if you have moved to another place?
  I guess you unit loses the connection to a wireless local area network and then he tries to connect again.
  Perhaps that is a reason? But that's only my guess.

  Well, in addition I propose to recovery your unit with the original recovery CD Toshiba.

  Good bye

• Satellite 5200 701 begins with SHLWAPI.dll error code

  My Satellite 5200 701 comes with SHLWAPI.dll error code, thn stops.

  Any help would be grateful!

  You can start your laptop in safe mode?

• Satellite 5200 701: how to enter CMOS/BIOS settings?

  Hello world! I m using a Toshiba Satellite 5200 701. How can I get into the CMOS/BIOS settings screen during startup? What button I push on? Thank you very much in advance for any help! I can't wait to be helped.

  Hello

  Do you have which key tested?
  Usually pressing the ESC key allows you to enter the default BIOS settings.
  But you can change the BIOS settings more in the Toshiba HWSetup that is located in Control Panel.

• Re: Wireless not found driver for Satellite 5200 701

  I have toshiba Satellite 5200 701 satallite, but I can't find the driver, even in this site,

  Check this HowTo
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  This will help you determine your wireless network card and to find the right driver for the WiFi chip.

  Welcome them

• Satellite Pro A100 - unknown device TOS1900

  I have a toshiba satellite pro a100. It came with XP installed.

  I recently installed a bigger hard drive and updated to Vista Ultimate (32 bit) operating system. I downloaded and installed all the drivers on the toshiba site but I still have a 'unknown' device in the device with a yellow exclamation point Manager, it details tab it says:
  'ACPI\TOS1900 '.
  * TOS1900»

  Can someone please tell me what this device is, and where can I find the right drivers?

  Hello

  Have you installed the Toshiba value added Package?

  Isn't it? To do this, and this unknown device should disappear

  Welcome them

• Satellite C50D-B1107 - unknown device in Device Manager

  Dear toshiba
  I have unknown device in device for satellite C50D-B1107 Manager, part number PSCN5V-00700HAR
  Although I download toshiba Web site necessary divers, then I followed the steps outlined in the knowledge base technical (how to identify an unknown device)
  the pilot has ven_1022 and dev_7814, looking for the necessary driver I found noting and I wounder why this driver not includred in the package of motherboard drivers
  so I nee your support to get this driver
  in the meantime your comments soon
  Kareem Ma

  Note the operating system: win 7 32 bit

• Satellite U500-115 - unknown devices after the Installation of Win XP

  Hello

  I just installed Windows XP on a Satellite U500 - 115 (PSU5EE) and cannot get rid of several unknown devices in Device Manager.

  Before to install the operating system, I changed settings AHCI in the BIOS to Compatibility-Mode (IDE), so I don't need to inject the SATA driver during installation.

  These are the unknown devices:

  ACPI\PNP0C32\1 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\2 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\3 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\4 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\TOS6205\2 & DABA3FF & 0 (location: System compatible ACPI Microsoft)

  Of course, I installed driver chipset and graphics driver from the toshiba download page, but the unknown devices are still there! Can you please tell me what kind of driver I need to install ACPI devices - and get rid of these unknown devices?

  Thanks in advance,
  Hans

  Hello

  In my opinion the unknown devices belongs to the SATA interface controller and these appear as unknown device because you have installed the XP compatible mode.

  Try to install the Intel Storage Manager driver.

  ACPI\TOS6205 device can be a Bluetooth device.
  You must install the battery Bluetooth to get rid of unknown device.

  welcome them

• Satellite A500-138 'unknown device' in Windows 7

  Hi all

  I am the owner of a Satellite A500-138 - Part Number: PSAM3E - 013014H 2.
  I just finished the upgrade of the o/s from the horrible vista to Windows 7 Ultimate 64. Update was smooth. Drivers and utilities were easily on your website and install it correctly. Almost everything seems to beworking OK...
  I find myself with 2 numbers:

  1. the watch still an "unknown device" Device Manager
  Details of the device shows hardware IDs of ACPI/ENE0200 and * ENE0200
  What is this and where can I find the driver?

  2. I can't find the Manager of LAN/WLAN cool utility that came with vista.

  Thanks in advance,

  Friend

  Hi friend,

  Have you checked the device ID and the unknown device provider? You can check in the properties of the device.
  Maybe it s Bluetooth adapter if your laptop is equipped with such a

  Regarding the WLAN tool, I think you mean ConfigFree. You can download it on the Toshiba site. Maybe the version of Vista also works on Windows 7.

  Good luck! :)