RE1000 abandon the connection of all devices

Similar Questions

• NETGEAR D6200 abandons the connection

  My netgear d6200 sometimes abandons the connection to my ISP, Ive tried to pass by the resolution of the problems several times and it goes through me by the same steps over and over until he finally asked my ISP details and then connects again and works fine.

  Additional information:

  1 details are all correct

  2 restart does not help

  3. it may take up to 2 hours just to do my job in connection

  Hi @Doswa

  Welcome to the community!

  You have the connection Mode is set to "Always On"? Otherwise, set it to this mode and observe your connection.

  What is the version of firmware installed on your gateway modem?

  In addition, make sure that you have the latest firmware installed on your device.

• Dell Server randomly abandons the connection to users.

  My Dell Server randomly abandons the connection to users in a building where the server does not find.  Different computers will sign the account and then randomly lose the connection to the server.  Thoughts?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How to export images and they look the same on all devices (iPhone, mac, desktop computer book)

  Hello

  I have adobe lightroom cc 2016 and I'm having the hardest time export photos, especially those where I use adjustment brushes and have look the same on all devices, my man book retna I will edit to look how I want, but for example when I look at the same image on the desktop mac dessu I can see all the adjustment brushes I used to darken

  on the 2 pictures below

  the first is what I see, its all uniformly dark and when I look on another device, according to me, which is depicted in the second photo

  (I have more exposed the second to show what I mean)

  I do not know what device who's going to be watching this post, but I hope you can help!

  Thank you! don't know what to do

  

  To ensure maximum viewing compatibility make sure you set the colorspace of the export in sRGB as below:

  

• I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I do not think that information... Adobe titles represent the only link I know following your accounts, but not where the programs are installed

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

• Implementation of two R7000 mode bridge (1 connects them 2 the internet and all devices, use 2!)

  Hello

  I have trouble finding my drives NAS via Wifi.

  Since I moved my NAS drives to the location of my second router and connect the first router to the internet and all my mobile devices and laptops, I have problems connecting to my NAS readers. Sometimes it works, but more often, it's not.

  I've implemented the first router as "router mode" and the second router als 'bridge'

  Can I change the configuration, so that my second router is connected to the NAS drives and also works as my router for mobile devices and laptops? Then the first router just to connect to the internet and transfer it via the bridge on the second router.

  I tried this, but it doesn't seem to work...

  Concerning

  Michael

  Just to close this topic: got the solution works by using a set of powerline Netgear. It provides internet access to my router located posting the TV and works perfectly. Wireless AC is not the answer to everything, I realize ;-)

  Thanks for the discussion.

• App of Watch sounding abandons the connection to their iPhone app

  I used Smart sounding for about a year to control my hearing aid Linx2 with my iPhone and Apple Watch successfully. However, recently, the app shows interrupts the connection to the iPhone app. Hearing AIDS continue to work well with the iPhone, but they do not meet the application of the watch. Everyone knows about this problem? I reinstalled the apps and rebooted the on both devices. If! restart the watch, the app connects, but the connection is soon dropped. I don't know if the problem related to recent IOS upgrading or something else. Any thoughts on how to solve this problem will be appreciated. Thanks in advance!

  Have you tried devices pair the two UN - force to restart both of them and then re - pair again?

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Restart your Apple Watch - Apple Support

  Apple Apple Watch support - Setup & matching-

• S50-B-12 q - WiFi adapter satellite abandons the connection

  The computer is a brand new Satellite S50-B-12 q.
  Everything seems to work outside the wireless card.

  When I first connect to my home network, it will have an internet connection for about 6 seconds, after which it changes status limited connectivity.

  The network uses WEP for security.
  Several other devices use without any problem.
  I tried everything I could think of:

  * Turning on computer power switch, reset of the card
  * Installation drivers new/rolling back drivers / different versions
  * Adapter enabled
  * Disabled the "allow the computer to turn off this device to save power".
  * Disconnection/reconnection to the network several times
  * netsh interface tcp set global autotuning = disabled / netsh interface tcp show global / netsh interface tcp set global autotuningl = normal
  Replacement of the windows 8, which comes with the computer with Windows 7 (same problem)
  * Troubleshooting with windows

  This is what it looks like when I ping:

  Ping google.com 173.194.32.39 with 32 bytes of data:
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 32ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 1075ms TTL = 57
  Request timed out.
  Request timed out.

  Basically, it works for like 6 seconds as mentioned previously, the ping increases a lot and then the connection is lost. Wired connection works perfectly.

  When I run diagnostics network integrated in windows 7, it shows the following:

  + * ProblΦmes trouvΘs: * +.
  The default gateway is not available/not fixed
  The connection between your access point, router, or modem cable, and the Internet is broken / detected

  I see that you have tried a lot of different solutions, but I put t see no workaround related to the WLan router.

  You said you are using WEP encryption.
  WEP is a very weak encryption standard. Usually its recommended to use WPA / WPA2 standard.
  I recommend you to reset the router back to factory settings WLan.
  Then test connectivity WLan using an open (unsecured) wireless LAN.
  But of course; This must be done only for testing purposes.

  You should also test different channels WLan (1-9). I guess that the Wlan router must contain settings too.

• Equium M70: card wireless regularly abandons the connection

  Hi, I wonder if anyone can help. My map regularly just Equiuim M70 wireless abandons its connection. If you browse on wireless networks, it seems my WEP encrypted network and it's one to connect to, as it says "Automatic" by him.
  If you click Connect it crashes with just "Waiting for network. So he can reconnect I have to go to network connections, right-click on the wireless connection, turn it off, then turn it back on and then it reconnects quite happy.
  I have the latest version of the installed Intel drivers and am allowing Windows XP manage connections.

  My Thinkpad R50 does not suffer the same problems. My wireless hub is a Dlink G604T.

  Has anyone else had similar problems - y at - it a cure? Is this a case of return my M70 and to repair/replace?

  Thank you

  Hello

  This problem also appears if WEP encryption is disabled?
  To me, it sounds like the card is not able to take the IP address automatically.
  This similar issue happens on my Toshiba laptop not. Sometimes, I have to use the repair of the WLan connection option to renew the ip address.
  It s not very serious problem for me and I can live with this question.

  I read in a net that can sometimes happen because of encryption theWEP and SP2.
  But if you want to get more details on the legs of connection on the M70, I suggest linking the Toshiba service partner in your country.

• WRT110 abandons the connection

  Good day to all!

  My WRT110 interrupts the connection from time to time, once or twice randomly per night + when one of my other PC starts.

  I have a wired Synology DS209 NAS, Internet broadband (via modem) and several wireless computers. In this case, the problem is reproducible: I have a connection on 1 PC, and when I start one of the other PC, the connection drops for 5 minutes (both internet and to my NAS) on all connected systems. After these 5 minutes, each system will connect again. All systems have DHCP turned on and all systems have different IPs just before that happens. I did a "return to the default settings" and power cycles, but the problem remains.

  When I look at with Vistumbler (or NetStumbler), I see 90% to 0% signal drop once by - say - 5 minutes and irregular.

  Should I get a faulty router?

  Thanks for a reply...

  Drogreder

  On the computer windows 7 disable IPv6 under for two adapters Wi-wired and wireless LAN settings.  Restart and try again.

• Push the connection interrupted by device - using eclipse of the bb Simulator

  Using BlackBerry plugin for Eclipse

  For OS 6

  After taking two weeks to try and correct an error "not close until you have finished" simple with SQLite, I now have a bit of a configuration issue with the Eclipse software.

  When I push a message to the Simulator, I get the following error.

  <2012-04-18 15:39:15.471 EDT>:[378]:::http://172.17.111.35:[email protected]&priority=2&besurl=192.168.1... pushId = -62be8811:136c6f71d73:-7ff576188, destination = [email protected], result code = 400 net.rim.protocol.iplayer.push.b: Push connection aborted by device>
  

  According to the knowledge base, a 400 error is 'invalid Push to the format.

  Mobile data service 3.7 and earlier versions: the email address or the personal identification number (PIN) used in the Push was not recognized as a user of BlackBerry Enterprise Server enabled for Mobile Data Service. »

  I'm sure it's something with the configuration in the rim.property file.  Something probably must be on or off, I can't understand.

  [MonitorAgent]
  MonitorAgent.listen.port=8070
  
  [WebServer]
  WebServer.Tomcat.transcoding= false
  WebServer.listen.host=localhost
  WebServer.listen.port=8080
  WebServer.listen.sslport=8443
  WebServer.servlet.monitor.port=8070
  WebServer.servlet.monitor.host=localhost
  WebServer.servlet.push.port=81
  WebServer.servlet.push.host=localhost
  WebServer.servlet.push.ssl=false
  
  [SRP]
  SRP.UID= please get one
  SRP.AuthenticationString= Please get one
  SRP.InetAddress= Please get one
  SRP.Port=3101
  SRP.logging=true
  
  [IPPP]
  IPPP.push.listen.tcp.port=81
  IPPP.connection.MaxNumberOfKBytesToSend=128
  IPPP.queue.flowcontrol.window.size=-1
  IPPP.queue.flowcontrol.timeout=600000
  IPPP.logging=true
  
  [UDP]
  UDP.receive.port=19781
  UDP.send.default=19780
  UDP.init=initialization_packet
  UDP.logging=true
  
  [HTTP HANDLER]
  application.handler.http.logging = true
  application.handler.http.CookieSupport = true
  application.handler.http.AuthenticationSupport = true
  application.handler.http.AuthenticationTimeout = 3600000
  application.handler.http.device.connection.timeout = 140000
  application.handler.http.server.connection.timeout = 150000
  application.handler.http.device.credentialTimeout = 60000
  application.handler.http.authentication.mechName2oid = Negotiate=1.2.840.113554.1.2.2, NTLM=1.3.6.1.4.1.311.2.2.10, Basic=1.3.6.1.4.1.88888.1.2
  
  [Security]
  net.rim.security.auth.DefaultDomain = rim.net
  
  [HTTPS HANDLER]
  application.handler.https.allowUntrustedServer = false
  application.handler.https.logging = true
  
  [TLS HANDLER]
  application.handler.tls.allowUntrustedServer = false
  application.handler.tls.logging = true
  
  [OCSP HANDLER]
  application.handler.ocsp.StatusProviders = net.rim.protocol.iplayer.connection.handler.device.ocsp.OCSPProvider
  application.handler.StatusProviders.OCSP.PrimaryResponderRank   = Default
  application.handler.StatusProviders.OCSP.Responder.Default      = http://dhobbs-wnt.rim.net/ocsp
  application.handler.StatusProviders.OCSP.UseDeviceResponders    = yes
  application.handler.StatusProviders.OCSP.UseCertResponders      = yes
  application.handler.ocsp.DebugLogging = no
  
  [LDAP HANDLER]
  application.handler.ldap.DEFAULT_SERVER = dhobbs-wnt
  application.handler.ldap.DEFAULT_PORT   = 389
  application.handler.ldap.DEFAULT_QUERY  = ou=people, o=rim.net
  application.handler.ldap.DEFAULT_LIMIT  = 20
  application.handler.ldap.COMPRESSION    = true
  application.handler.ldap.logging        = false
  
  [Database]
  Database.shouldConnect=false
  BESName=DAISY1
  Database.Driver=sun.jdbc.odbc.JdbcOdbcDriver
  Database.URL=jdbc:odbc:BESMgmt
  Database.DBCycleTimer=5
  
  [ACL]
  ACL.Authorization.Datastore=net.rim.shared.service.authorization.JDBCAuthorizationDatastore
  ACL.Enabled=false
  
  [ESS]
  ESS.helpfile    = help/Using_the_Email_Server_Simulator.html
  ESS.launcher    = bin/launcher.exe
  
  [Email]
  Email.deviceId      =2100000A
  Email.pop3Server    =pop3.server
  Email.smtpServer    =smtp.server
  Email.personal      =Dean Logan
  Email.address       [email protected]
  Email.smtpPort      =25
  Email.pop3Port      =110
  

  Any suggestions?

  Figured it out.

  When you set the port of the unit, I had the wrong port

  _notify = (StreamConnectionNotifier) Connector.open (appAttributes.devicePort + appAttributes.deviceSide);

  My company uses a Test port and a port of Prod, so that we can have 2 versions of the application on the device at the same time.  Then, chaning the listening port of 1315 to 1313 authorized service push push to the appropriate port and the app was able to read the data.

• Keeps remote desktop abandon the connection

  Hello

  I have just upgraded to Windows 7 Windows 8. The main question that I have now with Windows 8, it is the remote desktop client is somehow broken for me. Whenever I use it, it blocks (i.e. I can't interact with the remote computer) and then I get the box of Pseudo-dialogue indicating reconnection it will reconnect and I return the remote access. He does it all the time (about every few minutes). Note that when I can't interact with the computer to remove it, I can still ping it very well. Clearly, it is not a connection problem.
  It seems to be a problem with Microsoft Remote Desktop Client because I'm so tired, I tried 2 alternatives: terminals and mRemoteNG. Their use, never removes the connection.
  However, I would like to use the Microsoft client as it is more convenient to use. I tried to copy some binary files from Windows XP or Windows 7, but they do not work properly when I try to run them, I guess it's more than a simple 'mstsc.exe' to copy (I copied c:\windows\system32\mstscax.dll thus, but it kept loading of Windows 8).
  Anyone with a similar problem?
  Thank you
  Manu

  A fix came out 11/13 which appears to solve the problem for me. The number is 2897602.

  http://support.Microsoft.com/kb/2897602

• HP Pavilion DV6-7070SE: Broadcom 4313 802.11b/g/n abandon the connection lately

  Greetings,

  I'm planing to spend my wlan to 5 GHz because that starts them currently installed connection every few hours.

  Please advise on the correct module (P/N) for the 5 GHz model.

  If not supported, please refer to the best module that corresponds to my laptop.

  Thank you

  Hi @slimmy10 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook dv6-7070se and the connection Wireless drop. Before changing the wireless card, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels, and sometimes it helps.

  You could disable IPv6 for the laptop. Some say this helps.

  Solve this problem Microsoft Fix it 50413.

  Here is a link to help as well.

  If you still feel the need to change the card to your laptop wireless. Here is a link to page 52 of your manual for cards supported wireless.

  Hope it will be useful.

  Thank you.

• AM300 abandon the connection

  IM connected to a Linksys AM300 Modem and within hours it will drop the connection and get ip address of 169.254.193.178

  -J' have flashed and reflashed the modem with the latest firmware, I have reset and reconfigured it 5 times more.

  -It is not connected to any router just directly to a computer and lan cable

  -J' set the modem to my ISP recommended settings and also tried experimenting with different settings

  -J' tried to put the static IP address and also try another computer MAC and PC same problem.

  Help please.

  Well, from what you described I suppose it must be defective and you may need to replace it as you already have to level/flashed the firmware, handed over to zero and re-set up a couple of times... Confirm the settings of your ISP again and see if there is any change, nothing else, you can try...

• Remote Desktop connection abandons the connection permanently

  When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

  Hi Drifter5,

  Welcome to Windows Vista answers Forums!

  You can try the following steps and check if you can solve the problem.

  Here are a few possible causes of connection problems:

  The port of remote desktop can be blocked by a firewall.

  If you are using Windows Firewall, follow these steps:

  1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

  2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the Remote Desktop check box.

  If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

  Remote connections might not be enabled on the remote computer. To resolve this problem:

  4. on the remote computer, click the Start button, right-click computerand then click Properties.

  5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

  7. click on OK.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  If you use a wireless connection, then try to configure Windows to manage your network connections.

  For more information, you can consult the following link:

  http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.