Dell Server randomly abandons the connection to users.

Similar Questions

• NETGEAR D6200 abandons the connection

  My netgear d6200 sometimes abandons the connection to my ISP, Ive tried to pass by the resolution of the problems several times and it goes through me by the same steps over and over until he finally asked my ISP details and then connects again and works fine.

  Additional information:

  1 details are all correct

  2 restart does not help

  3. it may take up to 2 hours just to do my job in connection

  Hi @Doswa

  Welcome to the community!

  You have the connection Mode is set to "Always On"? Otherwise, set it to this mode and observe your connection.

  What is the version of firmware installed on your gateway modem?

  In addition, make sure that you have the latest firmware installed on your device.

• Can't download email, get "server has ended the connection.

  Original title: impossible to download email

  When I try to download my e-mail messages in Windows Mail, I get the message that the server has terminated the connection.  Trying to get 70 messages and it always locks upward when you message 5. Just cannot go beyond this one.  Any ideas as to why?

  KCG

  The 5th message may simply great download before the server times out.  You can use a web browser to log in to your email and delete it.

• Broadcom BCM43142 802.11 bgn Wi - Fi adapter abandons the connection randomly

  Hi, I have a HP Pavilion 500 t - Win 7 with a Broadcom BCM43142 802.11 bgn Wi - Fi adapter.

  I'm getting random interrupted internet connectivity.

  Does anyone else have this problem?

  Thank you!

  You are the very welcome.

  That the method of searching for updated drivers is only as good as if/when the hardware manufacturer pushes an update of the driver on the Windows Update site.

  Most of the time you will have to manually search for updated drivers.

  Usually you can find them as I did for the card wireless in your model.

  But the line at the bottom is, let's hope the driver to day made a difference.

• Can not access the site Web of John Lewis, get message server unexpectedly dropped the connection all the time

  Use the iMac with El Capitan 10.11.1 & Safari 9.0.1

  During the last week, I was unable to access the site Web of John Lewis and the message "Safari cannot open page www.johnlewis.com because the server dropped the connection unexpectedly. Sometimes this happens when the server is busy. Wait a few minutes and then try again"I retry but get the same message all the time. Can access all other sites ok.

  I emptied the cache, deleted the cookies and history. Enter the name of the site in its entirety is not helped either.

  Unable to access the Web by John Lewis site with my iPad either.

  Help!

  Try restarting/resetting the router.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Equium M70: card wireless regularly abandons the connection

  Hi, I wonder if anyone can help. My map regularly just Equiuim M70 wireless abandons its connection. If you browse on wireless networks, it seems my WEP encrypted network and it's one to connect to, as it says "Automatic" by him.
  If you click Connect it crashes with just "Waiting for network. So he can reconnect I have to go to network connections, right-click on the wireless connection, turn it off, then turn it back on and then it reconnects quite happy.
  I have the latest version of the installed Intel drivers and am allowing Windows XP manage connections.

  My Thinkpad R50 does not suffer the same problems. My wireless hub is a Dlink G604T.

  Has anyone else had similar problems - y at - it a cure? Is this a case of return my M70 and to repair/replace?

  Thank you

  Hello

  This problem also appears if WEP encryption is disabled?
  To me, it sounds like the card is not able to take the IP address automatically.
  This similar issue happens on my Toshiba laptop not. Sometimes, I have to use the repair of the WLan connection option to renew the ip address.
  It s not very serious problem for me and I can live with this question.

  I read in a net that can sometimes happen because of encryption theWEP and SP2.
  But if you want to get more details on the legs of connection on the M70, I suggest linking the Toshiba service partner in your country.

• I get this error message every time I try to open Outlook Express: your server unexpectedly terminated the connection.

  I get this error message whenever I try to open Outlook Express:
  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'smtp.mail.yahoo.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, error number: 0x800CCC0F

  How can I solve this?

  original title: Outlook Express error

  Does OE open at all, or you get this error after opening?

  Check your mail at Yahoo.com and see which messages are still on the server that you have not received. The first online can be very large and cannot be downloaded. If you find such a message, read it and delete it online.

  In addition, you must disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.  You will probably have to do it.
  

• WRT110 abandons the connection

  Good day to all!

  My WRT110 interrupts the connection from time to time, once or twice randomly per night + when one of my other PC starts.

  I have a wired Synology DS209 NAS, Internet broadband (via modem) and several wireless computers. In this case, the problem is reproducible: I have a connection on 1 PC, and when I start one of the other PC, the connection drops for 5 minutes (both internet and to my NAS) on all connected systems. After these 5 minutes, each system will connect again. All systems have DHCP turned on and all systems have different IPs just before that happens. I did a "return to the default settings" and power cycles, but the problem remains.

  When I look at with Vistumbler (or NetStumbler), I see 90% to 0% signal drop once by - say - 5 minutes and irregular.

  Should I get a faulty router?

  Thanks for a reply...

  Drogreder

  On the computer windows 7 disable IPv6 under for two adapters Wi-wired and wireless LAN settings.  Restart and try again.

• The user profile is not the connection. User profile cannot be loaded.

  original title: account login

  When I type my password, I get the message: the user profile has no connection. User profile cannot be loaded. I have two accounts and other newspapers with no problem. Can you help me? I use Windows Vista Home Premium.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The last time I buy a DELL server, due to the pantomime ridiculous cashback

  Hi, I was wondering if someone had met the total fiasco that is the recent Dell Server cashback promotion?

  More than a month, I bought a server Dell Poweredge T20 Ebuyer.Com

  This server is part of the DellTradeToSave £80 cashback promotion, so resembled a lot.

  After a wait of 30 days, I tried to submit my claim cashback. I have provided all the necessary information, although was unable to select the product, because the Poweredge T20 appears four times in the drop-down menu, with additional numbers that have nothing to do with the product. I took one on the list.

  Then I received an email from Dell, explaining that, although I had attached the receipt as requested, it was not enough because he didn't understand a number of VAT of Ebuyer (he did).

  They also requested a picture of the label of 'service' - this was not mentioned in the claims of the whole process. I duly interruption planned for my new server, disconnected, moved, photographed the tag and sent.

  I sent the receipt yet once and was briefed again once I had need of a different receipt, provided by Ebuyer.

  I contacted duly Ebuyer for another recipe that they provided.

  I sent this to 'DellTradeToSave', but this time, the DELL Representative decided that this reception "was not acceptable because ' it does not contain the logo of retailers!

  I contacted Ebuyer and they claim to have never heard of such a pantomime to request a deal of cashback from any other company.

  Indeed, my previous purchase of server (now several years ago) was a HP Proliant, who also had a cashback similar face which was covered in the next few days with absolutely no build-up.

  Everybody knows such an irritating and disastrous service trying to have the honor of DELL a cashback deal?

  Although it is only £80, it certainly leaves a bad taste in the mouth.

  Thank you

  Hi gtbfilms,

  Thanks for posting your comments on the Dell Community Forum Customer Care Board of the United States. Please accept my apologies for any frustration or annoyance which caused this cashback program.

  It will advise you that I have forwarded your concerns to representatives supporting the United Kingdom Dell. A person will contact you using the address you provided during the validation of your comments on the forum.

  Thanks for your patience,
  Lorna

• App of Watch sounding abandons the connection to their iPhone app

  I used Smart sounding for about a year to control my hearing aid Linx2 with my iPhone and Apple Watch successfully. However, recently, the app shows interrupts the connection to the iPhone app. Hearing AIDS continue to work well with the iPhone, but they do not meet the application of the watch. Everyone knows about this problem? I reinstalled the apps and rebooted the on both devices. If! restart the watch, the app connects, but the connection is soon dropped. I don't know if the problem related to recent IOS upgrading or something else. Any thoughts on how to solve this problem will be appreciated. Thanks in advance!

  Have you tried devices pair the two UN - force to restart both of them and then re - pair again?

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Restart your Apple Watch - Apple Support

  Apple Apple Watch support - Setup & matching-

• S50-B-12 q - WiFi adapter satellite abandons the connection

  The computer is a brand new Satellite S50-B-12 q.
  Everything seems to work outside the wireless card.

  When I first connect to my home network, it will have an internet connection for about 6 seconds, after which it changes status limited connectivity.

  The network uses WEP for security.
  Several other devices use without any problem.
  I tried everything I could think of:

  * Turning on computer power switch, reset of the card
  * Installation drivers new/rolling back drivers / different versions
  * Adapter enabled
  * Disabled the "allow the computer to turn off this device to save power".
  * Disconnection/reconnection to the network several times
  * netsh interface tcp set global autotuning = disabled / netsh interface tcp show global / netsh interface tcp set global autotuningl = normal
  Replacement of the windows 8, which comes with the computer with Windows 7 (same problem)
  * Troubleshooting with windows

  This is what it looks like when I ping:

  Ping google.com 173.194.32.39 with 32 bytes of data:
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 32ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 1075ms TTL = 57
  Request timed out.
  Request timed out.

  Basically, it works for like 6 seconds as mentioned previously, the ping increases a lot and then the connection is lost. Wired connection works perfectly.

  When I run diagnostics network integrated in windows 7, it shows the following:

  + * ProblΦmes trouvΘs: * +.
  The default gateway is not available/not fixed
  The connection between your access point, router, or modem cable, and the Internet is broken / detected

  I see that you have tried a lot of different solutions, but I put t see no workaround related to the WLan router.

  You said you are using WEP encryption.
  WEP is a very weak encryption standard. Usually its recommended to use WPA / WPA2 standard.
  I recommend you to reset the router back to factory settings WLan.
  Then test connectivity WLan using an open (unsecured) wireless LAN.
  But of course; This must be done only for testing purposes.

  You should also test different channels WLan (1-9). I guess that the Wlan router must contain settings too.

• HP Pavilion DV6-7070SE: Broadcom 4313 802.11b/g/n abandon the connection lately

  Greetings,

  I'm planing to spend my wlan to 5 GHz because that starts them currently installed connection every few hours.

  Please advise on the correct module (P/N) for the 5 GHz model.

  If not supported, please refer to the best module that corresponds to my laptop.

  Thank you

  Hi @slimmy10 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook dv6-7070se and the connection Wireless drop. Before changing the wireless card, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels, and sometimes it helps.

  You could disable IPv6 for the laptop. Some say this helps.

  Solve this problem Microsoft Fix it 50413.

  Here is a link to help as well.

  If you still feel the need to change the card to your laptop wireless. Here is a link to page 52 of your manual for cards supported wireless.

  Hope it will be useful.

  Thank you.

• AM300 abandon the connection

  IM connected to a Linksys AM300 Modem and within hours it will drop the connection and get ip address of 169.254.193.178

  -J' have flashed and reflashed the modem with the latest firmware, I have reset and reconfigured it 5 times more.

  -It is not connected to any router just directly to a computer and lan cable

  -J' set the modem to my ISP recommended settings and also tried experimenting with different settings

  -J' tried to put the static IP address and also try another computer MAC and PC same problem.

  Help please.

  Well, from what you described I suppose it must be defective and you may need to replace it as you already have to level/flashed the firmware, handed over to zero and re-set up a couple of times... Confirm the settings of your ISP again and see if there is any change, nothing else, you can try...

• Remote Desktop connection abandons the connection permanently

  When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

  Hi Drifter5,

  Welcome to Windows Vista answers Forums!

  You can try the following steps and check if you can solve the problem.

  Here are a few possible causes of connection problems:

  The port of remote desktop can be blocked by a firewall.

  If you are using Windows Firewall, follow these steps:

  1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

  2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the Remote Desktop check box.

  If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

  Remote connections might not be enabled on the remote computer. To resolve this problem:

  4. on the remote computer, click the Start button, right-click computerand then click Properties.

  5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

  7. click on OK.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  If you use a wireless connection, then try to configure Windows to manage your network connections.

  For more information, you can consult the following link:

  http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.