Read data from table of $ E and insert in the staging table
Hi allI'm new on ODI. I need your help to understand how to read data from a table ' E$ "and insert in an intermediate table.
Scenario:
The name of two columns, in a flat file, the employee and the employee id must be loaded into a data EMPstore +. A check constraint is added so that the data with the employee names in capital letters only to load in the data store. Check the command is set to the static movement . Right-click on the data store, select control , then check. The lines that have violated the check constraint are kept in E$ _EMP+ table.
Problem:
Problem is I want to read the data in the table E$ _EMP+ and transform in capital letters in the name of the employee and move the corrected data of E$ _EMP+ EMP+. Please advise me on how to automatically manage the 'soft' exceptions in ODI.
Thank you
If I understand, you want to change the columns in the tables of $ E and then load into the target.
Now, if you notice how ODI recycles the error, there is an incremental update to the target using the E table $ after he filled the I$ table.
I think you can do the same thing by creating an interface using the table of $ E as source and implement the business logic in this interface to fill the target.
Tags: Business Intelligence
Similar Questions
-
Reading data from a file txt and inserting into table
I have a text file and have uploaded data in this text file in an internal table,
the data is normally placed online and I managed to recover most of the data, but I have problems by inserting a few conditions
OK, well it goes like this.
I got the right reailer id,
Well, I have a table with all the columns in the file. Now it I'll try to throw it out as simple as I can
Reseller 1
column 1 column 1 column 1 column 1 column 1 column 1 column 1 column 1
===============
Total 0 0 0 0 0 0 0
-------------------------------------
Distributor 2
column 1 column 1 column 1 column 1 column 1 column 1 column 1 column 1
===============
X 1123... .. .. .. .. ..
234 Y... .. .. .. .. ..
Total 23... .. .. .. .. ..
see the problem is I have to associate the retailer number to their corresponding x and y and also not all retailers have values X and Y
The remains of standard file format but only the values of the columns may change, but they must be inserted in the table according to the number of retailers.
U understand what I mean...How about you, including both terminal number (just for the fun of it... hehe!):
SQL> ed Wrote file afiedt.buf 1 select retailer_no, terminal_no, retailer_name, val1, val2, val3, val4, val5, val6, val7, val8, val9, val10 2 from ( 3 select case when retailer_no is null then lag(retailer_no, decode(val1, 'Loto', 1, 'Inst Tk', 2, 3)) over (order by line_no) else null end as retailer_no 4 ,case when terminal_no is null then lag(terminal_no, decode(val1, 'Loto', 1, 'Inst Tk', 2, 3)) over (order by line_no) else null end as terminal_no 5 ,case when retailer_name is null then lag(retailer_name, decode(val1, 'Loto', 1, 'Inst Tk', 2, 3)) over (order by line_no) else null end as retailer_name 6 ,val1, val2, val3, val4, val5, val6, val7, val8, val9, val10 7 from ( 8 select rownum as line_no 9 ,case when regexp_like(line, '^Retailer Number:') then regexp_replace(line, '^Retailer Number: +([0-9]+).*$', '\1') else null end as retailer_no 10 ,case when regexp_like(line, '^Retailer Number:') then regexp_replace(line, '^.* Terminal Number: +([0-9]+).*$', '\1') else null end as terminal_no 11 ,case when regexp_like(line, '^Retailer Number:') then regexp_replace(line, '^.* Retailer Name: +(.*)$', '\1') else null end as retailer_name 12 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then trim(substr(line, 1, 15)) else null end as val1 13 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 1) else null end as val2 14 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 2) else null end as val3 15 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 3) else null end as val4 16 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 4) else null end as val5 17 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 5) else null end as val6 18 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 6) else null end as val7 19 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 7) else null end as val8 20 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 8) else null end as val9 21 ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 9) else null end as val10 22 from cdc_file 23 where regexp_like(line, '^( +Loto | +Inst Tk |Totals|Retailer Number:)') 24 ) 25 ) 26 where retailer_no is not null 27* order by 1, decode(val1, 'Loto', 1, 'Inst Tk', 2, 3) SQL> / RETAILER_N TERMINAL_N RETAILER_NAME VAL1 VAL2 VAL3 VAL4 VAL5 VAL6 VAL7 VAL8 VAL9 VAL10 ---------- ---------- ------------------------------ ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- 10000 1000006 XXXX XXXX XX Default Location Totals 0.00 0.00 0 0.00 0 0.00 0 0.00 0 10000 1000008 XXXX XXXX XX Default Location Totals 0.00 0.00 0 0.00 0 0.00 0 0.00 0 200101 20010100 XXXXXXX Popular Store Loto 36,100.00 0.00 0 0.00 36 -5,646.00 0 0.00 0 200101 20010100 XXXXXXX Popular Store Inst Tk 22,000.00 0.00 0 0.00 166 -9,360.00 0 0.00 0.00 200101 20010100 XXXXXXX Popular Store Totals 58,100.00 0.00 0 0.00 202 -15,006.00 0 0.00 0 200103 20010300 XX XXXXXXXX Snack Loto 35,980.00 0.00 0 0.00 20 -3,426.00 0 0.00 0 200103 20010300 XX XXXXXXXX Snack Inst Tk 14,000.00 0.00 0 0.00 157 -9,180.00 0 0.00 0.00 200103 20010300 XX XXXXXXXX Snack Totals 49,980.00 0.00 0 0.00 177 -12,606.00 0 0.00 0 8 rows selected. SQL>Published by: BluShadow on January 22, 2010 13:37
added the retailer's name as well, but out anonymous that we dislike the actual data on the forums... ;) -
How can I extract the data from a csv file and insert it into an Oracle table? (UTL_FILE)
Hi, please help me whit this query
Im trying to extrate the data in a file csv and im using the ULT_FILE package
I have this query that read the file and the first field, but if the field has a different length does not work as it shouldFor example if I had this .csv file:
1, book, laptop
2, pen, Eraser
3, notebook, paper
And in the table, I had to insert like this
ID descrption1 description2
laptop 1 book
Eraser pen 2
paper laptop 3
For now, I have this query, which displays only with DBMS:
Declare
-Variables
Cadena VARCHAR2 (32767).
Vfile UTL_FILE. TYPE_DE_FICHIER;
Dato varchar2 (200); -Date
dato1 varchar2 (200);
dato2 varchar2 (200);
Identifier varchar2 (5): = ', '; -Identifier (en)
v_ManejadorFichero UTL_FILE. TYPE_DE_FICHIER; -For exceptions
-Table variables
I_STATUS GL_INTERFACE. % OF STATUS TYPE.
I_LEDGER_ID GL_INTERFACE. TYPE % LEDGER_ID;
I_USER_JE_SOURCE_NAME GL_INTERFACE. TYPE % USER_JE_SOURCE_NAME;
I_ACCOUNTING_DATE GL_INTERFACE. TYPE % ACCOUNTING_DATE;
I_PERIOD_NAME GL_INTERFACE. TYPE % PERIOD_NAME;
I_CURRENCY_CODE GL_INTERFACE. CURRENCY_CODE % TYPE;
I_DATE_CREATED GL_INTERFACE. DATE_CREATED % TYPE;
I_CREATED_BY GL_INTERFACE. CREATED_BY % TYPE;
I_ACTUAL_FLAG GL_INTERFACE. TYPE % ACTUAL_FLAG;
I_CODE_COMBINATION_ID GL_INTERFACE. TYPE % CODE_COMBINATION_ID;
I_ENTERED_DR GL_INTERFACE. TYPE % ENTERED_DR;
I_ENTERED_CR GL_INTERFACE. TYPE % ENTERED_CR;
I_ACCOUNTED_DR GL_INTERFACE. TYPE % ACCOUNTED_DR;
I_ACCOUNTED_CR GL_INTERFACE. TYPE % ACCOUNTED_CR;
I_TRANSACTION_DATE GL_INTERFACE. TRANSACTION_DATE % TYPE;
I_REFERENCE1 GL_INTERFACE. REFERENCE1% TYPE;
I_REFERENCE2 GL_INTERFACE. REFERENCE2% TYPE;
I_REFERENCE3 GL_INTERFACE. REFERENCE3% TYPE;
I_REFERENCE4 GL_INTERFACE. REFERENCE4% TYPE;
I_REFERENCE5 GL_INTERFACE. REFERENCE5% TYPE;
I_REFERENCE10 GL_INTERFACE. REFERENCE10% TYPE;
I_GROUP_ID GL_INTERFACE. GROUP_ID % TYPE;
BEGIN
Vfile: = UTL_FILE. FOPEN ('CAPEX_ENVIO', 'comas.csv', 'R');
loop
UTL_FILE. GET_LINE(Vfile,Cadena,32767);
dato1: = substr (cadena, instr(cadena, identificador,1,1)-1, instr(cadena, identificador,1,1)-1);
dato2: = substr (cadena, instr (cadena, identifier, 1, 1) + 1, instr(cadena, identificador,3,1)-3);
dbms_output.put_line (dato1);
dbms_output.put_line (dato2);
-The evidence
-dbms_output.put_line (cadena);
-dbms_output.put_line (substr (dato, 3, instr(dato, identificador,1,1)-1));
-dbms_output.put_line (substr (dato, instr (dato, identifier, 1, 2) + 1, instr(dato, identificador,1,1)-1));
-dbms_output.put_line (substr (cadena, 1, length (cadena)-1));
end loop;
UTL_FILE. FCLOSE (Vfile);
-----------------------------------------------------------------------------------EXCEPTIONS------------------------------------------------------------------------------------------------------------------------------------------------------------
EXCEPTION
When no_data_found then
dbms_output.put_line ('Todo Correcto');
When utl_file.invalid_path then
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20060,'RUTA DEL ARCHIVO NULLIFIED: (');)
WHEN UTL_FILE. INVALID_OPERATION THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR ('-20061,'EL ARCHIVO NO PUDO SER ABIERTO ");
WHEN UTL_FILE. INVALID_FILEHANDLE THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20062, 'INVALIDO MANAGER');
WHEN UTL_FILE. WRITE_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20063, 'ESCRITURA ERROR');
WHEN UTL_FILE. INVALID_MODE THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20064, 'MODO INVALIDO');
WHEN UTL_FILE. INTERNAL_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20065, 'ERROR INTERNO');
WHEN UTL_FILE. READ_ERROR THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20066, 'LECTURA ERORR');
WHEN UTL_FILE. FILE_OPEN THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR ('-20067,'EL ARCHIVO ARE ESTA ABIERTO ");
WHEN UTL_FILE. THEN ACCESS_DENIED
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20068, 'REFUSED ACCESS');
WHEN UTL_FILE. DELETE_FAILED THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20069, 'OPERACIÓN BORRADO FALLO');
WHEN UTL_FILE. RENAME_FAILED THEN
UTL_FILE. FCLOSE (V_ManejadorFichero);
RAISE_APPLICATION_ERROR (-20070, 'OPERATION SOBREESCRITURA FALLO');
END;
Hello
Try something like this:
POS1: = INSTR (cadena, idntificador, 1, 1);
POS2: = INSTR (cadena, idntificador, 1, 2);ID: = SUBSTR (cadena, 1, pos1 - 1);
description1: = SUBSTR (cadena, pos1 + 1, (pos2 - pos1)-1);
Description2: = SUBSTR (cadena, pos2 + 1);where pos1 and pos2 are numbers.
Rather than use UTL_FILE, consider creating an external table. You won't have to write any PL/SQL, and this means that you won't be tempted to write a bad article of EXCEPTION.
-
Hi I have measured data using a SELF-DIAGNOSIS device and that you have downloaded the log files as a .csv I have attatched below. I'm trying to read the 7th column of data (RPM) and display it on a waveform graph, read line-by-line to simulate driving real-time data. The interval between readings, I'm trying to achieve is 500 Ms because it is the time interval of readings on the worksheet. I'm finishing the two loops when rpm is equal to zero, as happens when the car is off. I have attatched the relevant section of my program below. Any suggestions would be greatly appreciated.
Thank you
Michael
There are two errors in your block diagram. First of all, as you read the entire table 2D in all at once (which is fine), you make a clumsy (pardon my language) job to make a line of programming. Once you take the first line of headers, you have the ideal substrate for a loop, which is made of elements of an array (lines) process, one at a time, using its tunnel of indexation.
The second mistake is to forget data flow. The loop, I mentioned, or the While loop you use, produced one at a time and points it at 2 Hz thanks to your expectation of 500msec. You want to give each point to your chart, but the picture is out of the loop, which means that there is No point until the loop ends.
Here's an easy Question - where you put the indicators in table of waveform? [Council - I said that "outside the loop is bad"].
Bob Schor
-
How to recover data from textfield, select location and fill in the data of another textfield
I want to be able to enter a number or text in a field, and then select a location for the data to be placed in the world based on the selected location
Here's a form Im trying to get to work.
http://www.myschooljacket.com/OutputLocation.PDF
Thanks for any help you can lend.
OK I've got get it now... is your modified sample.
Paul
-
Reading data from a text (JS CS3) file tabs-delimited
Hi - I'm working on a script to read data from a text file and use in a dialog box. But I hit a wall.
I used a script from a previous post that defines a variable text document when the user script he chooses from a drop-down list.
var myDialog = app.dialogs.add({name:"Map",canCancel:true});)
{with (MyDialog)}{with (dialogColumns.Add ())}
{with (borderPanels.Add ())}
staticTexts.add ({staticLabel: "choose the location :"});})
{with (dialogColumns.Add ())}
var file = File("~/Desktop/myPlacesfile.txt");leader. Open ("r");
var str = file.read ();
leader. Close();
var myPlaceList = str.split (/ [\r\n] + /);
var myPlaceMenu = dropdowns.add ({stringList:myPlaceList, selectedIndex:0});})
}
}}}
Ditto var = myDialog.show ();
if(myResult == true) {}
If (myPlaceMenu.selectedIndex == 0) {}
myPlace var = ' - undefined ";
} else {}
myPlace var = myPlaceList [myPlaceMenu.selectedIndex];
Alert (myPlace);
}myDialog.destroy ();
}That's what I do now:
The text file is in this format:
Value1 value2 [TAB]
Value1 value2 [TAB]
Value1 value2 [TAB]
I need to have the drop down dialog box show only the value 1, and after that the user selects, the script returns only the value 2. (The alert is just there to test - I'm doing something else with the variable).
Is there a way to view the first part of a tab-delimited line in the menu drop down and return the second half as a variable?
Any help would be greatly appreciated.
Thank you
One of the possibilities is that it. Create a table to the left of the values of the tab of the dialog box. Then create an object that you use it as a table of correspondence. Roughly as follows:
same thing as what you have
leader. Open ("r");
var str = file.read ();
leader. Close();
var array = str.split (/ [\r\n] + /);'pairs' are the table of correspondence
pair of var = {};
as before, 'myPlaceList' will be used for the menu drop-down
var myPlaceList = [];var v;
for (var i = 0; i)< array.length;="">
{
v = table [i] .split ('\t');
pairs [v [0]] = v [1];
myPlaceList.push (v [0]);
}Add the drop-down list as before:
var myPlaceMenu = dropdowns.add ({stringList:myPlaceList, selectedIndex:0});})
the table of 'pairs' correspondence is used as follows: pairs ['value1'] returns 'value2 '.
so in your script that would be:
myPlace var pairs = [myPlaceList [myPlaceMenu.selectedIndex]];
Peter
-
How to read data from an excel and HTML file
Hello
I write a 2D-array of string in Excel/HTML file using the generation of reports.
Can someone tell me how to get back in return, the written data, same files again and display in table format.
Thank you & best regards
Visuman
You can use activex to read data from the excel fileback to the table format... through this vi... may b this will help you...
-
Extracting data from table without refreshment and without using the tab key.
Hi friends,
I have a problem I want to extract data from table without discount in the text field without using the Tab key. When I enter a field value any value then the text corressponding should enter into corressponding textfield without using the Tab key.
for example. When I get back emp_id 101 in a text field then first_name and last_name, address would come in to the text fields corressponding without refresh and use the Tab key.
How can I do that.
Thank you
MauryHi Maury,
I guess it's similar to: retrieving data without refreshing rather than Re: value of a textfield should enter into an another textfield without using the TAB ?
If so, the only change you want to bring on the first is to use the parameter "Onkeyup" instead of "onchange" in the 'HTML Form attributes of the element' element.
Note, however, that the user must move away from the issue at some point (for example, to click on a button), so the onchange will fire anyway.
Andy
-
Hi all
I searched the forums, and unfortunately I have no idea on how to go on the following.
I have the following SQL report created with APEX_ITEM. SELECT_LIST-
> select id, questions, APEX_ITEM. SELECT_LIST (p_idx = > 1, p_value = > '- Select Rating-', p_list_values = > 1, 1, 3, 3, 5, 5', p_attributes is > "style =" "color: Black;"', p_show_null = > 'YES', p_null_value = > NULL, p_null_text = > '- Select Rating-', p_item_id = > ' the ROWNUM # f01_ #', p_item_label = > ' label for ROWNUM f01_ # #', p_show_extra = > 'NO') 'Rating' of the sqa_customer_questions by id order
Query runs as you like, but I don't know how to accept the values of the rows. I would like to insert the values of the selection list and their respective ID for all the entries in another table. I'm not able to find out how I could read data from these APEX_ITEMs and reach my goal.
Any help is appreciated.
Kind regards
Jean-PierreNope,
Can you put the app on apex.oracle.com
In any case if you have a report like this
SELECT id, something FROM tableYou can do it for the
SELECT id||APEX_ITEM.HIDDEN(2,id) id, something FROM tableAnd then reference it as APEX_APPLICATION. G_F02 (the first parameter provided to apex_item determine the number) in your process.
See you soon
Ben
http://www.munkyben.WordPress.com
Don't forget to mark the answers useful or correct ;) -
How to read data from an Excel 2010 worksheet with the .xlsx extension? The data I want, it's on one of the 10 tabs in the file, I have to choose which programmatically. I have the Report Generation Toolkit for LV2012, but all the screws that come with it seem to focus around writing data to a spreadsheet Excel and make charts and whatnot. I want to * read * an Excel worksheet. Seeking answers led to many 'Open it and save it as tab delimited text', which I can't do because I need data from different tabs, and because this file is quite dynamic with many users opening and adding several times. In order to save the tab I want as a tab delimited text file per programming, I'm back a square, how to open it?
My solution would ideally fill in the blanks of: spreadsheet.xlsx---> _---> 2 or 3D data table.
Thank you
Adam
This fixes:
-
Extract the XML tags and insert into the table
Description:
XML is under inert atmosphere in the table containing the xmltype column. Need to extract value from xml tag and insert into the table.
Once the XML record Treaty must update the status as 'Y' in the base tableProblem:
There are multiple occurrences of some tags that need to be combined and stored in a single column to delineate the '-'. No. area of occurrence can vary for each record.
There are a few encrypted column that I managed to convert decoded value. But used select distinct... XMLTYPE...
GTT table is used to store the intermediate result and decoding and the concatenation of several tags occurred using TWG.1.No. multiple tag will vary how to extract those and concatenate them into a single column. I assumed his occrrence in 3 for example: < student >
2. how to set the value NULL if no tag is not present. Tag in XML record number can vary. I know that the complete list of xmltags.
3 data not found error for some xml documents.Kindly Assits how to achieve this.
version: 11.2.0.3.0
Table Base: temp_XML
XML_ID NOT NULL NUMBER (28) - auto-increment using the sequence
PUBLIC EVENT. Stores the XMLTYPE STORAGE BINARY - XML file
DATE OF EVTDATE
STATUS VARCHAR2 (3) DEFAULT ' don'tSample XML: Includes all the brands mentioned in the common procedure below.
<? XML version = "1.0" encoding = "US-ASCII"? >
"< event xmlns ="http://xmlextrac.test.com/object">."
< data xmlns = "" >
< object >
<>units
< unit > TLAS < / unit >
< unit > ATLAS < / unit >
< / units >
< receiverNetworks >
< receiverNetwork > ABSAZAJ0XXXX < / receiverNetwork >
< / receiverNetworks >
< correspondentIds >
< correspondentId > #SWF - ABSAZAJ0XXX < / correspondentId >
< / correspondentIds >
< comment >
< comment / >
< comment / >
< comment / >
< comment / >
< / comment >
< memo >
< memo > 28 < / memo >
< / memos >
< tuxedoPriority > 20 < / tuxedoPriority >
sender <>Mike < / sender >
< typeReseauId > Message < / typeReseauId >
< maxRetry > 4 < / maxRetry >
< msgSecuLevel > CBA < / msgSecuLevel >
< quantity >
< amount > 12 < / amount >
< amount > 34 < / amount >
< amount > 56 < / amount >
< / amounts >
< currencys >
< currency > $ < / currency >
< currency > EUR < / currency >
INR < currency > < / currency >
< / currencys >
< msgDateVal > ARST123 < / msgDateVal >
wder < direction > < / direction >
< eventType > 113 < / eventType >
< date > 1407431619 < / date >
< eventDate > 1407431624 < / eventDate >
< management > R < / direction >
< msgRef > R950140807AB6CBE < / msgRef >
< format > SWF < / size >
< type > 950 < / type >
R950140807AB6CBE < WALL > < / WALL >
< bankingPriority / >
FSDS < field.20 > < / field.20 >
< texteType > FSS < / texteType >
< applicationCode > OHS < / applicationCode >
< company > KETH < / company >
< endFct > MOE < / endFct >
< rate > BAM < / flow >
< subtype / >
< text > DQo6MjA6R0wxNDA4MDcwMDA1MTMNCjoyNTo3M == < / text >
< msgHeaders > ezE6RjAxTE9ZRE5MMjBCWFhYMDAzMjAw = < / msgHeaders >
< msgTrailer > ezU6e0NISzpEOUFFRUNCN0NBQTl9e1RORzp9fQ == < / msgTrailer >
< / object >
< / data >
Procedure: This works very well for a few xml record and fails for some.
CREATE OR REPLACE PROCEDURE XML_EXTR
AS
CURSOR c1
IS
SELECT * FROM temp_XML;c1_cur c1% ROWTYPE;
bamdata_sql VARCHAR2 (3000);
d_text VARCHAR2 (3000);
d_msgHeaders VARCHAR2 (3000);
d_msgTrailer VARCHAR2 (3000);
x_text VARCHAR2 (3000);
x_msgHeaders VARCHAR2 (3000);
x_msgTrailer VARCHAR2 (3000);
x_eventType VARCHAR2 (3000);
x_amount number (28.2).
x_currency VARCHAR2 (3000);
x_state VARCHAR2 (3000);
x_units VARCHAR2 (3000);
x_correspondentId VARCHAR2 (3000);
X_TYPE VARCHAR2 (3000);
x_receiverNetworks VARCHAR2 (3000);
x_bankingPriority VARCHAR2 (3000);
x_applicationCode VARCHAR2 (3000);
x_processCounter VARCHAR2 (3000);
x_obsolescence VARCHAR2 (3000);
x_maxRetry VARCHAR2 (3000);
x_retries VARCHAR2 (3000);
x_fileSize VARCHAR2 (3000);
x_endFct VARCHAR2 (3000);
x_subType VARCHAR2 (3000);
x_field20 VARCHAR2 (3000);
x_sequenceNumber VARCHAR2 (3000);
x_requestorDn VARCHAR2 (3000);
x_responderDn VARCHAR2 (3000);
x_SWIFTNetService VARCHAR2 (3000);
x_transfertRef VARCHAR2 (3000);
x_nonrepudiation VARCHAR2 (3000);
x_transfertInfo VARCHAR2 (3000);
x_fileDesc VARCHAR2 (3000);
x_transfertDesc VARCHAR2 (3000);
x_logicalName VARCHAR2 (3000);
x_signIndicator VARCHAR2 (3000);
x_critId VARCHAR2 (3000);
x_inFapId VARCHAR2 (3000);
x_deliveryNotif VARCHAR2 (3000);
x_comment1 VARCHAR2 (3000);
x_comment2 VARCHAR2 (3000);
x_comment3 VARCHAR2 (3000);
x_comment4 VARCHAR2 (3000);
x_comments VARCHAR2 (3000);
x_memo1 VARCHAR2 (3000);
x_memo2 VARCHAR2 (3000);
x_memo3 VARCHAR2 (3000);
x_memo4 VARCHAR2 (3000);
x_msgSecuLevel VARCHAR2 (3000);
x_dates VARCHAR2 (3000);
x_tuxedoPriority VARCHAR2 (3000);
x_fileDest VARCHAR2 (3000);
x_stkMsgPDEId VARCHAR2 (3000);
x_EMTId VARCHAR2 (3000);
x_LTRcptSyno VARCHAR2 (3000);
x_LTRcpt VARCHAR2 (3000);
x_LTEmis VARCHAR2 (3000);
x_flow VARCHAR2 (3000);
x_FINCopy VARCHAR2 (3000);
x_msgDateVal VARCHAR2 (3000);
x_eventDate VARCHAR2 (3000);
x_typeReseauId VARCHAR2 (3000);
x_inFapSeq1 VARCHAR2 (3000);
x_inFapSeq2 VARCHAR2 (3000);
x_direction VARCHAR2 (3000);
x_priority VARCHAR2 (3000);
x_ack VARCHAR2 (3000);
x_format VARCHAR2 (3000);
x_mur VARCHAR2 (3000);
x_TexteType VARCHAR2 (3000);
x_creatingUser VARCHAR2 (3000);
x_fileinfo VARCHAR2 (3000);
x_company VARCHAR2 (3000);
x_language VARCHAR2 (3000);
x_ackText VARCHAR2 (3000);
x_jaxbRef VARCHAR2 (3000);
x_jaxbElt VARCHAR2 (3000);
x_memos VARCHAR2 (3000);
xmlid number (28);
x_msgRef1 VARCHAR2 (3000);
x_msgRef2 VARCHAR2 (3000);
x_msgRef3 VARCHAR2 (3000);
x_msgRef4 VARCHAR2 (3000);
x_sender VARCHAR2 (3000);
x_amlBehavior VARCHAR2 (3000);
x_ownerServiceId VARCHAR2 (3000);
x_correspondentName VARCHAR2 (3000);
x_correspondentAddress1 VARCHAR2 (3000);
x_correspondentAddress2 VARCHAR2 (3000);
x_correspondentAddress3 VARCHAR2 (3000);
x_correspondentAddress4 VARCHAR2 (3000);
x_correspondentCity VARCHAR2 (3000);
x_correspondentCountry VARCHAR2 (3000);
x_correspondentNetworkAddr VARCHAR2 (3000);
x_tested VARCHAR2 (3000);
x_correspondentNetwork VARCHAR2 (3000);
x_validatedPercentage VARCHAR2 (3000);
x_nbOfValid VARCHAR2 (3000);
x_requestRef VARCHAR2 (3000);
x_notifQueue VARCHAR2 (3000);
x_requestType VARCHAR2 (3000);
x_secBpid VARCHAR2 (3000);
x_queue VARCHAR2 (3000);
x_receiverCode VARCHAR2 (3000);
x_receiverInd VARCHAR2 (3000);
x_validFlag VARCHAR2 (3000);
x_ownerId VARCHAR2 (3000);
x_dn VARCHAR2 (3000);
x_RMAOurBic VARCHAR2 (3000);
x_RMACorrespondentBic VARCHAR2 (3000);
x_RMAService VARCHAR2 (3000);
x_fileMsgRef VARCHAR2 (3000);
date of x_ext_date;
x_correspondentAddress VARCHAR2 (3000);
x_msgrefs varchar2 (3000);
d_ackText varchar2 (3000);
ackText varchar2 (3000);
date of x_extdate;BEGIN
FOR C1_CUR IN C1
LOOP
INSERT INTO data_GTT_TEMP)
eventType, amount, currency, State, units, correspondentId, sender, receiverNetworks, bankingPriority, applicationCode, processCounter.
obsolescence, maxRetry, reminders, fileSize, endFct, xsubType, field.20, sequenceNumber, requestorDn, responderDn, SWIFTNetService, non-repudiation,
transfertRef, transfertInfo, fileDesc, transfertDesc, logicalName, signIndicator, critId, inFapId, deliveryNotif, comment1, comment2, comment3, comment4,
Memo1, memo2, memo3, memo4, msgSecuLevel, dates, tuxedoPriority, fileDest, stkMsgPDEId, EMTId, LTRcptSyno, LTRcpt, LTEmis, flow, FINCopy, msgDateVal,
eventDate, typeReseauId, inFapSeq1, inFapSeq2, direction, priority, ack,
msgRef1, msgRef2, msgRef3, msgRef4, amlbehavior, correspondentName, ownerServiceId,
correspondentAddress1, correspondentAddress2, correspondentAddress3, correspondentAddress4,
correspondentCity, correspondentCountry, correspondentNetworkAddr, tested,
correspondentNetwork, validatedPercentage, nbOfValid, requestRef, notifQueue,
requestType, secBpid, xqueue, receiverCode, receiverInd, validFlag, ownerId, dn, RMAOurBic, RMACorrespondentBic, RMAService,
fileMsgRef, format, xtype, wall, TexteType, creatingUser, fileinfo,
company, text, xlanguage, ackText, msgHeaders, msgTrailer, jaxbRef, jaxbElt)
SELECT
x.eventType, x.amount, x.currency, x.state, x.units, x.correspondentId, x.sender, x.receiverNetworks, x.bankingPriority, x.applicationCode, x.processCounter,
x.obsolescence, x.maxRetry, x.Retries, x.FileSize, x.endFct, x.xsubType, x.Field20, x.SequenceNumber, x.requestorDn, x.responderDn, x.SWIFTNetService, x.nonRepudiation,
x.transfertRef, x.transfertInfo, x.fileDesc, x.transfertDesc, x.logicalName, x.signIndicator, x.critId, x.inFapId, x.deliveryNotif, x.comment1, x.comment2,
x.comment3, x.comment4, x.Memo1, x.memo2, x.memo3, x.MEMO4, x.msgSecuLevel, x.dates, x.tuxedoPriority, x.fileDest, x.stkMsgPDEId, x.EMTId, x.LTRcptSyno,
x.LTRcpt, x.LTEmis, x.flow, x.FINCopy, x.msgDateVal, x.eventDate, x.typeReseauId, x.inFapSeq1, x.inFapSeq2, x.direction, x.priority, x.ack,
x.msgRef1, x.msgRef2, x.msgRef3, x.msgRef4, x.amlbehavior, x.correspondentName, x.ownerServiceId,
x.correspondentAddress1, x.correspondentAddress2, x.correspondentAddress3, x.correspondentAddress4,
x.correspondentCity, x.correspondentCountry, x.correspondentNetworkAddr, x.tested,
x.correspondentNetwork, x.validatedPercentage, x.nbOfValid, x.requestRef, x.notifQueue,
x.requestType, x.secBpid, x.xqueue, x.receiverCode, x.receiverInd, x.validFlag, x.ownerId, x.dn, x.RMAOurBic, x.RMACorrespondentBic, x.RMAService,
x.fileMsgRef, x.format, x.xtype, x.mur, x.TexteType, x.creatingUser, x.fileinfo,
x.Company, x.Text, x.xLanguage, x.ackText, x.msgHeaders, x.msgTrailer, x.jaxbRef, x.jaxbEltof temp_XML t, XMLTABLE (XMLNAMESPACES ('http://xmlextrac.test.com/object' as "ns0"), ' / ns0:event' )
PASSAGE t.BAM_EVENT COLUMNS
eventType varchar2 (3000) PATH 'data, object, eventType' DEFAULT NULL,
amount number (28.2) path data/object/amounts"."
currency varchar2 (3000) PATH 'data, object, currencys, currency' DEFAULT NULL,
VARCHAR2 (3000) path "data/object / / state of ' DEFAULT NULL, State
units varchar2 (3000) PATH ' object/data/units' DEFAULT NULL,
correspondentId varchar2 (3000) PATH "data/object/correspondentIds' DEFAULT NULL,
sender varchar2 (3000) PATH 'data, object, sender' DEFAULT NULL,
receiverNetworks varchar2 (3000) PATH "data/object/receiverNetworks' DEFAULT NULL,
bankingPriority varchar2 (3000) PATH "data/object/bankingPriority' DEFAULT NULL,
applicationCode varchar2 (3000) PATH ' object/data/applicationCode' DEFAULT NULL,
processCounter varchar2 (3000) PATH "data/object/processCounter' DEFAULT NULL,
obsolescence varchar2 (3000) PATH ' data/object/obsolescence' DEFAULT NULL,
maxRetry varchar2 (3000) PATH ' data/object/maxRetry' DEFAULT NULL,
attempts to varchar2 (3000) "data/object/attempts" DEFAULT NULL path,.
size of the file varchar2 (3000) PATH ' data/object/fileSize' DEFAULT NULL,
endFct varchar2 (3000) PATH "data/object/endFct' DEFAULT NULL,
xsubType varchar2 (3000) PATH "data/object/subtype' DEFAULT NULL,
field.20 varchar2 (3000) PATH ' object/data/field.20' DEFAULT NULL,
sequenceNumber varchar2 (3000) PATH "data/object/sequenceNumber" DEFAULT NULL,
requestorDn varchar2 (3000) PATH "data/object/requestorDn' DEFAULT NULL,
responderDn varchar2 (3000) PATH "data/object/responderDn' DEFAULT NULL,
SWIFTNetService varchar2 (3000) PATH "data/object/SWIFTNetService' DEFAULT NULL,
non-repudiation varchar2 (3000) PATH ' object/data/repudiation' DEFAULT NULL,
transfertRef varchar2 (3000) PATH "data/object/transfertRef' DEFAULT NULL,
transfertInfo varchar2 (3000) PATH "data/object/transfertInfo' DEFAULT NULL,
fileDesc varchar2 (3000) PATH "data/object/fileDesc' DEFAULT NULL,
transfertDesc varchar2 (3000) PATH "data/object/transfertDesc' DEFAULT NULL,
logicalName varchar2 (3000) PATH "data/object/logicalName" DEFAULT NULL,
signIndicator varchar2 (3000) PATH "data/object/signIndicator' DEFAULT NULL,
critId varchar2 (3000) PATH "data/object/critId' DEFAULT NULL,
inFapId varchar2 (3000) PATH "data/object/inFapId' DEFAULT NULL,
deliveryNotif varchar2 (3000) PATH "data/object/deliveryNotif' DEFAULT NULL,
COMMENT1 varchar2 (3000) PATH ' data, subject, comments, comment [1] "DEFAULT NULL,
comment2 varchar2 (3000) PATH 'data, subject, comments, how [2]' DEFAULT NULL,
comment3 varchar2 (3000) PATH "data/object/observations/comments [3]" DEFAULT NULL,
comment4, varchar2 (3000) PATH ' data, subject, comments, comment [4] "DEFAULT NULL,
Memo1 varchar2 (3000) PATH "data/object/memos/memo [1]" DEFAULT NULL,
Memo2 varchar2 (3000) PATH "data/object/notes/Notes [2]" DEFAULT NULL,
memo3 varchar2 (3000) PATH "data/object/memos/memo [3]" DEFAULT NULL,
MEMO4 varchar2 (3000) PATH "data/object/memos/memo [4]" DEFAULT NULL,
msgSecuLevel varchar2 (3000) PATH "data/object/msgSecuLevel' DEFAULT NULL,
Date varchar2 (3000) PATH ' object/data/date' DEFAULT NULL,
tuxedoPriority varchar2 (3000) PATH "data/object/tuxedoPriority' DEFAULT NULL,
fileDest varchar2 (3000) PATH "data/object/fileDest' DEFAULT NULL,
stkMsgPDEId varchar2 (3000) PATH "data/object/stkMsgPDEId' DEFAULT NULL,
EMTId varchar2 (3000) PATH "data/object/EMTId' DEFAULT NULL,
LTRcptSyno varchar2 (3000) PATH "data/object/LTRcptSyno' DEFAULT NULL,
LTRcpt varchar2 (3000) PATH "data/object/LTRcpt' DEFAULT NULL,
LTEmis varchar2 (3000) PATH "data/object/LTEmis' DEFAULT NULL,
flow varchar2 (3000) PATH "/ object/data flow ' DEFAULT NULL,
FINCopy varchar2 (3000) PATH ' data/object/FINCopy' DEFAULT NULL,
msgDateVal varchar2 (3000) PATH "data/object/msgDateVal' DEFAULT NULL,
eventDate varchar2 (3000) PATH "data/object/eventDate" DEFAULT NULL,
typeReseauId varchar2 (3000) PATH "data/object/typeReseauId' DEFAULT NULL,
inFapSeq1 varchar2 (3000) PATH "data/object/inFapSeq1' DEFAULT NULL,
inFapSeq2 varchar2 (3000) PATH "data/object/inFapSeq2' DEFAULT NULL,
direction varchar2 (3000) PATH 'data, object, direction' DEFAULT NULL,
priority varchar2 (3000) PATH ' data/object/priority' DEFAULT NULL,
ACK varchar2 (3000) PATH ' object/data/ack' DEFAULT NULL,
msgRef1 varchar2 (3000) PATH ' data, object, msgRefs, msgRef [1] "DEFAULT NULL,
msgRef2 varchar2 (3000) PATH ' data, object, msgRefs, msgRef [2] "DEFAULT NULL,
msgRef3 varchar2 (3000) PATH ' data, object, msgRefs, msgRef [3] "DEFAULT NULL,
msgRef4 varchar2 (3000) PATH ' data, object, msgRefs, msgRef [4] "DEFAULT NULL,
amlBehavior varchar2 (3000) PATH "data/object/amlBehavior' DEFAULT NULL,
ownerServiceId varchar2 (3000) PATH "data/object/ownerServiceId' DEFAULT NULL,
correspondentName varchar2 (3000) PATH ' data/object/correspondentName' DEFAULT NULL,
PATH of VARCHAR2 (3000) of correspondentAddress1 ' object/data/correspondentLine1Addresse' DEFAULT NULL,
PATH of VARCHAR2 (3000) of correspondentAddress2 ' object/data/correspondentLine2Addresse' DEFAULT NULL,
PATH of VARCHAR2 (3000) of correspondentAddress3 ' object/data/correspondentLine3Addresse' DEFAULT NULL,
PATH of VARCHAR2 (3000) of correspondentAddress4 ' object/data/correspondentLine4Addresse' DEFAULT NULL,
correspondentCity PATH VARCHAR2 (3000) ' object/data/correspondentCity' DEFAULT NULL,
correspondentCountry PATH VARCHAR2 (3000) ' object/data/correspondentCountry' DEFAULT NULL,
correspondentNetworkAddr PATH VARCHAR2 (3000) ' object/data/correspondentNetworkAddr' DEFAULT NULL,
tested VARCHAR2 (3000) PATH ' data/object/tested' DEFAULT NULL,
correspondentNetwork PATH VARCHAR2 (3000) ' object/data/correspondentNetwork' DEFAULT NULL,
validatedPercentage PATH VARCHAR2 (3000) ' object/data/validatedPercentage' DEFAULT NULL,
nbOfValid PATH VARCHAR2 (3000) ' object/data/nbOfValid' DEFAULT NULL,
requestRef VARCHAR2 (3000) PATH ' data/object/requestRef' DEFAULT NULL,
notifQueue PATH VARCHAR2 (3000) ' object/data/notifQueue' DEFAULT NULL,
requestType PATH VARCHAR2 (3000) ' data/object/requestType' DEFAULT NULL,
secBpid PATH VARCHAR2 (3000) ' object/data/secBpid' DEFAULT NULL,
xqueue PATH VARCHAR2 (3000) ' data/object/tail' DEFAULT NULL,
receiverCode PATH VARCHAR2 (3000) ' object/data/receiverCode' DEFAULT NULL,
receiverInd PATH VARCHAR2 (3000) ' object/data/receiverInd' DEFAULT NULL,
validFlag PATH VARCHAR2 (3000) ' object/data/validFlag' DEFAULT NULL,
ownerId PATH VARCHAR2 (3000) ' data/object/ownerId' DEFAULT NULL,
DN VARCHAR2 (3000) PATH ' data/object/dn' DEFAULT NULL,
PATH of VARCHAR2 (3000) of RMAOurBic ' object/data/RMAOurBic' DEFAULT NULL,
PATH of VARCHAR2 (3000) of RMACorrespondentBic ' object/data/RMACorrespondentBic' DEFAULT NULL,
PATH of VARCHAR2 (3000) of RMAService ' object/data/RMAService' DEFAULT NULL,
fileMsgRef PATH VARCHAR2 (3000) ' object/data/fileMsgRef' DEFAULT NULL,
ackText varchar2 (3000) PATH "data/object/ackText' DEFAULT NULL,
format varchar2 (3000) PATH "data/object / ' DEFAULT NULL,
xType varchar2 (3000) PATH ' data/object/type' DEFAULT NULL,
Wall varchar2 (3000) PATH ' data/object/wall' DEFAULT NULL,
texteType varchar2 (3000) PATH "data/object/texteType' DEFAULT NULL,
creatingUser varchar2 (3000) PATH ' data/object/creatingUser' DEFAULT NULL,
fileInfo varchar2 (3000) PATH ' data/object/fileInfo' DEFAULT NULL,
VARCHAR2 (3000) path ' data/object/society' DEFAULT NULL, the company
VARCHAR2 (3000) text ' data/object/text' DEFAULT NULL path.
xLanguage varchar2 (3000) PATH ' data/object/language' DEFAULT NULL,
msgHeaders varchar2 (3000) PATH "data/object/msgHeaders' DEFAULT NULL,
msgTrailer varchar2 (3000) PATH "data/object/msgTrailer' DEFAULT NULL,
jaxbRef varchar2 (3000) PATH ' info/jaxbRef' DEFAULT NULL,
jaxbElt varchar2 (3000) PATH "jaxbElt/info") x
where t.XML_ID = c1_cur. XML_ID and t.status =' no;Select x.text, x.msgHeaders, x.msgTrailer in x_msgTrailer, x_msgHeaders, x_text of
temp_XML t, XMLTABLE (XMLNAMESPACES ('http://xmlextrac.test.com/object' as "ns0"), ' / ns0:event' )
PASSAGE t.BAM_EVENT COLUMNS
text varchar2 (3000) PATH data/object/text"."
msgHeaders varchar2 (3000) PATH "data/object/msgHeaders,"
msgTrailer varchar2 (3000) PATH "object/data/msgTrailer.
) x
where t.XML_ID = c1_cur. XML_ID;
Select sysdate in double x_extdate;
d_text: = utl_raw.cast_to_varchar2 (utl_encode.base64_decode (utl_raw.cast_to_RAW (x_text)));
d_msgHeaders: = utl_raw.cast_to_varchar2 (utl_encode.base64_decode (utl_raw.cast_to_RAW (x_msgHeaders)));
d_msgTrailer: = utl_raw.cast_to_varchar2 (utl_encode.base64_decode (utl_raw.cast_to_RAW (x_msgTrailer)));
-d_ackText: = utl_raw.cast_to_varchar2 (utl_encode.base64_decode (utl_raw.cast_to_RAW (ackText)));Select
EventType, amount, currency, State, units, correspondentid, sender, receivernetworks, bankingpriority,
applicationcode, processcounter, obsolescence, maxretry, reminders, filesize, endfct, xsubtype, field.20, sequencenumber, requestordn,
responderdn, swiftnetservice, non repudiation, transfertref, transfertinfo, filedesc, transfertdesc, logicalname, signindicator,
critid, infapid, deliverynotif, comment1, comment2, comment3, comment4, memo1, memo2, memo3, memo4, msgseculevel, dates, tuxedopriority, filedest,
stkmsgpdeid, emtid, ltrcptsyno, ltrcpt, ltemis, flow, fincopy, msgdateval, eventdate, typereseauid, infapseq1,
infapseq2, direction, priority, ack, msgref1, msgref2, msgref3, msgref4, amlbehavior, ownerserviceid, correspondentname, correspondentaddress1, correspondentaddress2, correspondentaddress3, correspondentaddress4,
correspondentcity, correspondentcountry, correspondentnetworkaddr, test, correspondentnetwork, validatedpercentage, nbofvalid,.
requestref, notifqueue, requesttype, secbpid, xqueue, receivercode, receiverind, validflag, ownerid, dn, rmaourbic, rmacorrespondentbic, rmaservice, filemsgref,
acktext, format, xtype, wall, textetype, creatinguser, fileinfo, society, text, xlanguage, msgheaders, msgtrailer, jaxbref, jaxbelt
in
x_eventtype, x_amount, x_currency, x_state, x_units, x_correspondentid, x_sender, x_receivernetworks, x_bankingpriority, x_applicationcode, x_processcounter,
x_obsolescence, x_maxretry, x_retries, x_filesize, x_endfct, x_subtype, x_field20, x_sequencenumber, x_requestordn, x_responderdn, x_swiftnetservice, x_nonrepudiation,
x_transfertref, x_transfertinfo, x_filedesc, x_transfertdesc, x_logicalname, x_signindicator, x_critid, x_infapid, x_deliverynotif, x_comment1, x_comment2, x_comment3,
x_comment4, x_memo1, x_memo2, x_memo3, x_memo4, x_msgseculevel, x_dates, x_tuxedopriority, x_filedest, x_stkmsgpdeid, x_emtid, x_ltrcptsyno, x_ltrcpt,
x_ltemis, x_flow, x_fincopy, x_msgdateval, x_eventdate, x_typereseauid, x_infapseq1, x_infapseq2, x_direction, x_priority, x_ack, x_msgref1, x_msgref2,
x_msgref3, x_msgref4, x_amlbehavior, x_ownerserviceid, x_correspondentname, x_correspondentaddress1, x_correspondentaddress2, x_correspondentaddress3,
x_correspondentaddress4, x_correspondentcity, x_correspondentcountry, x_correspondentnetworkaddr, x_tested, x_correspondentnetwork, x_validatedpercentage,
x_nbofvalid, x_requestref, x_notifqueue, x_requesttype, x_secbpid, x_queue, x_receivercode, x_receiverind, x_validflag, x_ownerid, x_dn, x_rmaourbic,
x_rmacorrespondentbic, x_rmaservice, x_filemsgref, x_acktext, x_format, x_type, x_mur, x_textetype, x_creatinguser, x_fileinfo, x_company, x_text,
x_language, x_msgheaders, x_msgtrailer, x_jaxbref, data_GTT_TEMP x_jaxbelt;x_memos: = x_memo1 | » -'|| x_memo2 | » -'|| x_memo3 | » -'|| x_memo4;
x_comments: = x_comment1 | » -'|| x_comment2 | » -'|| x_comment3 | » -'|| x_comment4;
x_correspondentAddress: = x_correspondentAddress1 | » -'|| x_correspondentAddress2 | » -'|| x_correspondentAddress3 | » -'|| x_correspondentAddress4;
x_msgrefs: = x_msgRef1 | » -'|| x_msgRef2 | » -'|| x_msgRef3 | » -'|| x_msgRef4;BEGIN
insert into donnees_xml
(xml_id, x_ext_date, eventtype, amount, currency, State, unit, correspondentid, sender, receivernetworks, bankingpriority, applicationcode,
ProcessCounter, obsolescence, maxretry, reminders, filesize, endfct, xsubtype, field.20, sequencenumber, requestordn, responderdn,
swiftnetservice, non repudiation, transfertref, transfertinfo, filedesc, transfertdesc, logicalname, signindicator, critid, infapid,
deliverynotif, comments, notes, msgseculevel, dates, tuxedopriority, filedest, stkmsgpdeid, emtid, ltrcptsyno, ltrcpt, ltemis, flow,
FINCopy, msgdateval, eventdate, typereseauid, infapseq1, infapseq2, direction, priority, ack, msgrefs, amlbehavior, ownerserviceid,
correspondentName correspondentaddress, correspondentcity, correspondentcountry, correspondentnetworkaddr, tested,
correspondentnetwork, validatedpercentage, nbofvalid, requestref, notifqueue, requesttype, secbpid, xqueue, receivercode,
receiverind, validflag, ownerid, dn, rmaourbic, rmacorrespondentbic, rmaservice, filemsgref, acktext, format, xtype, wall,
textetype, creatinguser, fileinfo, society, text, xlanguage, msgheaders, msgtrailer, jaxbref, jaxbelt)
values
(xmlid, x_extdate, x_eventType, x_amount, x_currency, x_state, x_units, x_correspondentId, x_sender, x_receiverNetworks, x_bankingPriority, x_applicationCode,
x_processCounter, x_obsolescence, x_maxRetry, x_retries, x_fileSize, x_endFct, x_subType, x_field20, x_sequenceNumber, x_requestorDn, x_responderDn,
x_SWIFTNetService, x_nonRepudiation, x_transfertRef, x_transfertInfo, x_fileDesc, x_transfertDesc, x_logicalName, x_signIndicator, x_critId, x_inFapId,
x_deliveryNotif, x_comments, x_memos, x_msgSecuLevel, x_dates, x_tuxedoPriority, x_fileDest, x_stkMsgPDEId, x_EMTId, x_LTRcptSyno, x_LTRcpt, x_LTEmis, x_flow,
x_FINCopy, x_msgDateVal, x_eventDate, x_typeReseauId, x_inFapSeq1, x_inFapSeq2, x_direction, x_priority, x_ack, x_msgrefs, x_amlbehavior, x_ownerServiceId,
x_correspondentName, x_correspondentAddress, x_correspondentCity, x_correspondentCountry, x_correspondentnetworkaddr, x_tested,
x_correspondentNetwork, x_validatedPercentage, x_nbOfValid, x_requestRef, x_notifQueue, x_requestType, x_secBpid, x_queue, x_receiverCode,
x_receiverInd, x_validFlag, x_ownerId, x_dn, x_RMAOurBic, x_RMACorrespondentBic, x_RMAService, x_fileMsgRef, ackText, x_format, x_type, x_mur,
x_TexteType, x_creatingUser, x_fileinfo, x_company d_text, x_language, d_msgHeaders, d_msgTrailer, x_jaxbRef, x_jaxbElt);Update temp_XML set status = 'Y' where XML_ID = xmlid;
END;
COMMIT;
END LOOP;
END;
/1.No. multiple tag will vary how to extract those and concatenate them into a single column. I assumed that his occrrence in 3 for example:
Use the fn:string-join() function:
path varchar2 (4000) of comments 'string-join(comments/comment, "-").
2. how to set the value NULL if no tag is not present. Tag in XML record number can vary.
You don't have anything specific to do in this case.
Missing tags with a projection in the COLUMNS clause will produce a column NULL by default.
-
I followed the instructions of Firefox to import bookmarks/favorites to Internet Explorer. It does not work because the import data from another browser is not active in the import tab and backup in the history. The instructions read to use this tab, but does not work because it cannot be selected.
Make sure that you are not Firefox running in permanent private browsing mode.
To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
- Uncheck the box: [] "always use the navigation mode private.
-
Can read data from xls using teststand 3.5?
Hello
I use 3.5 TestStand and LabVIEW 8.je know these are quite old versions now, but we must continue with this on a test bench.
My question is how can I read data from the file xls using TestStand 3.5? I have already mentioned a few posts on this, and one response suggested that I should use "tGetExcel" using ActiveX adapter. I tried to run the test example related to "http://forums.ni.com/t5/NI-TestStand/Write-or-read-to-Excel-from-TestStand/td-p/250439/highlight/tru...", but a run-time error. He says that "the tGetExcel type library information not found. Make sure that the server is registered in the system.
TestStand 4.2, I could easily run excel at the base of operations by using the Office Excel Toolkit.
I was wondering, is there another way, I can read just .xls file data by using Teststand 3.5?
Thank you
Niraj.
Please check this example for charger of property:
C:\Program Files (x 86) \National Instruments\TestStand 3.5\Examples\LoadingLimits
This shows the limits of excel file loading.
But you can load the values of the variables-consult the help file / Reference manual for this type of step.
Also in the loader type forum search property - you can find more information.
I hope this helps.
-
How to recover data from table
I'm new to APEX 4.0, how to recover data from table
My table is CR_USERPROFILE... and I want to recover data to the following recommendations:
Select the title, user name, address, email, mobile, cr_userprofile where e-mail is APEX_CUSTOM_AUTH. GET_USERNAME
Text P110_EMAIL 10 field
20 P110_TITLE selection list
P110_USERNAME 30 text field
Text field P110_ADDRESS 40
P110_PHONE 50 text field
Text P110_MOBILE 60 field
could any body if you please help...
Thanks and greetings
LukeHello
1. create the process Page.
2. Select the Data Manipulation
3. in the category select "Automated line Fetch".
4 enter the process name, sequence, select "on the load - before the headers" to the point.
5. specify the owner, table, primary key and the key column primary (Item name contains the primary key).
6. create a process.
7. in each element, select "Column of the database" in "the Source Type.Kind regards
Patel Kartik
------------------------------------------------------------------------
http://patelkartik.blogspot.com/
http://Apex.Oracle.com/pls/Apex/f?p=9904351712:1 -
I have a function that I would read in pl/sql. How can I read data from it. EMPARRAY function return.
FUNCTION META_PODATKI_TABEL
(ime_tabele VARCHAR2, st_napake NUMBER
)
RETURN EMPARRAY ACE
EMPARRAY is:
create or replace TYPE "EMPARRAY" as VARRAY (10000) OF VARCHAR2 (4000);
I try but nothing works.
THXPut the function calls in the clause of a query using the TABLE from:
SQL> create or replace TYPE "EMPARRAY" as VARRAY(10000) OF VARCHAR2(4000); 2 / Type created. SQL> create or replace FUNCTION META_PODATKI_TABEL 2 (ime_tabele VARCHAR2, st_napake NUMBER 3 ) 4 RETURN EMPARRAY AS 5 begin 6 return emparray('aaa','bbb','ccc'); 7 end; 8 / Function created. SQL> select * from table(META_PODATKI_TABEL('x',1)); COLUMN_VALUE ------------------------------------------------------------------------------------ aaa bbb cccMax
http://oracleitalia.WordPress.com
Maybe you are looking for
-
Printer all-in-one HP4504 ENVY: black & only cartridges printer HP ENVY 4504?
As I ususally put my impression in black scale, can I just insert 2 rather than 1 black and 1 color black ink cartridges? In addition, my color cartridge has clearly not served so much is it good to put in a new black cartridge?
-
How to read the resolution, video P.C. of the Analyzer of spectrum using labview?
Hi all I use the Analyzer of spectrum R & S and its pilots as ResSpecAn, I want to read the BW, BW video resolution and scan time. So how can get these values. Thank you very much... Patricia
-
I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 se
-
My hard disk has been partitioned in c, d, e, f &. no space on my c drive
original title: Partitions My hard disk has been partitioned in c, d, e, f &. I ran out of space on my c drive, although I do not install anything there and can not see anything I can delete to free up space. How can I solve this problem
-
How to disable automatic replication of the original images
I really need help on how to disable the automatic original photos copy. I have thousands of duplicates and have hours of spents on topics help and Web sites and cannot find this option. I'm extremely frustrated because this should be simple. If yo