read dll void pointer

Similar Questions

• From a Void pointer in a DLL in Labview

  I have a DLL provided by a hardware manufacturing, I try to run in 2012 of Labview.  The first function gets a handle to a device connected to the USB port.
  CEDP i1d3Status_t i1d3GetDeviceHandle (unsigned int whichDevice, i1d3Handle * devHndl);
  i1d3Status_t is an Enumeration of error codes and i1d3Handle is defined as void * i1d3Handle.
  I wrote a wrapper for this DLL

  int GetDeviceHandle (int peripheral, i1d3Handle & handle) {}
  i1d3Status_t m_err;
  int error;
  m_err = i1d3GetDeviceHandle (device, & handle);
  error = m_err;
  error return;
  }

  I can get this working by the way the handle that adapt to the kind and maintain value.  The following function opens the device

  int OpenProbe (i1d3Handle handle) {}
  i1d3Status_t m_err;
  int error;
  unsigned char ucOEM [] is {0xD4, 0x9F, 0xD4, 0xA4, 0 x 59, 0x7E, 0x35, 0xCF, 0};.
  m_err = i1d3OverrideDeviceDefaults (0,0, ucOEM);
  if(m_err == i1d3Success) {}
  m_err = i1d3DeviceOpen (handle);
  If (m_err! = i1d3Success) {}
  unsigned char ucNull [] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0};
  i1d3OverrideDeviceDefaults (0,0,ucNull);
  m_err = i1d3DeviceOpen (handle);
  }
  }
  error = m_err;
  error return;
  }

  It works by passing the value of the handle returned from the previous VI as an I64.  There are several other functions to read the settings of the device that I know it is open and the handle is valid, but here's my problem.  The following function, I need to pass a pointer here is the code.

  int GetDiffuserPosition (i1d3Handle handle, unsigned char * pos) {}
  i1d3Status_t m_err;
  int error;
  m_err = i1d3ReadDiffuserPosition (handle (i1d3Handle), &pos);)
  error return;
  }

  This code works in VC ++ but not in Labview, I get an error of 1097 of the VI.  So passing the handle as an I64 will work as long as I do not pass a pointer with it because this code will not work.

  unsigned char GetDiffuserPosition (i1d3Handle handle) {}
  i1d3Status_t m_err;
  unsigned char pos;
  m_err = i1d3ReadDiffuserPosition (handle (i1d3Handle), &pos);)
  return pos;
  }

  I even tried to dumb down to the function

  int GetDiffuserPosition (int * i1d3Handle handle x) {}

  * x = 5;

  return 0;

  }

  and still no error of 1097.  Any suggestions would be welcome

  This excerpt must be the call library function correct node for the initialization and diffuser of playback functions. Give it a try? (If you are not familiar with the code snippets: this picture's code.) Drag it to your desktop to save a copy, and then drag it into a block diagram. You need resolve the path to the DLL of course).

  

• VI = external dll function pointer reference?

  So I'm porting this simple program in C in LabVIEW. It receives signals of a haptic (Sensable Phantom Omni) material. It should be simple, but it showed several complications. (been stuck for 2 weeks )

  I managed to import the material with all its functions DLL (using LV 8.2, because 8.5 and 8.6 Assistant sucks).

  But there is a function whose argument is a function pointer:

  hUpdateHandle = hdScheduleAsynchronous (updateDeviceCallback, 0, HD_MAX_SCHEDULER_PRIORITY);

  I already have the corresponding VI to updateDeviceCallback (which is a (void *) who don't really use and returns an int).

  hdScheduleAsynchronous is part of the API of the material (I'm not kidding with her, and I know what's inside), and as first argument expects a function pointer.

  Can I use the node reference to open VI to get the "pointer" for my VI and then feed him as an argument for the external DLL? How to properly mount the ref VI data type in a function pointer?

  Although DLL probably uses the C calling convention and then Visual C like prefixing underscore before the exported name. Node to call library of LabVIEW bypasses that you entered because when he's trying to GetProcAdress a function name, and the operation fails, it automatically retries with the name of function with added underscore. For your own "Wrapper"DLL", you will have to do something similar, or use the right name.

  But while the reminder THAT DLL is indeed must be written in C to avoid trouble, functions to load the library and GetProcAddress can be easily implemented directly in LabVIEW by using the node library call. It lets more easily play you with such things as the function names.

  Rolf Kalbermatter

• Gdiplus.dll error, point of entry DllRegisterServer was not found. This file cannot be saved

  Hello
  I have a HP laptop Compaq Presario R3000 running XP sp2.
  While trying to install software for my new HP laserjet printer 451color, I couldn't finish because my computer seems to have a problem with the file gdiplus.dll.  After a regsvr32 in the "Run" dialog box, I get the following message: "gdiplus.dll was loaded, but the DllRegisterServer entry point was not found.  This file cannot be saved. " This problem MAY occur in the past, while the installation of other software or printer, I don't remember, but I CAN get frustrated with it and simply ignored and passed without being able to use everything I tried to add. (I get so tired things does not in the way they are supposed to!)

  I've updated to SP3, which did not help.  I am considering a system recovery. I don't want to lose all my programs, drivers, etc.. I did a search and read as a:
  «Startup Repair replace only damaged or missing Windows startup files.» In a Windows XP repair install, Windows all files are replaced no matter whether or not they wish to. Note: If you use a disk to restore your computer manufacturer instead of an installation disc of original Windows download, a Startup Repair or repair install as stated in the above linked guides would not be possible. »
  I don't want to click on the wrong thing and screw this place! Can anyone tell me if these a repair overwrite of the windows file system is an option with the operating system microsoft windows xp home sp1 disk?
  Is there a better way to solve this problem?
  Any help is appreciated.
  Thanks, Jeff

  jeffbrom,

  While this article is not about the issue that you are experiencing it however has a patch to replace a bad file gdiplus.dll. Give the patch a whirlwind (it should replace and properly record) and I would like to know the results:

  http://support.HP.com/us-en/document/c00615478

  Good luck!

• DLL structure pointer

  Need some help here, as I have tried everything I can think of.

  Created a cluster, which is the structure and based on call die I have defined "Adapt to the Type" and table data pointer, but it keeps failing as you can see below

  You will appreciate any help/tips to get this working...

  This should work if you set the name of the DLL and function, make sure that the calling convention is just.

  

• Read a data point every time via the sound card

  Hello!

  I'm reading the output of an amplifier to lock that cannot be connected to my PC. So I decided to read througn my mic.

  To do this, I connect channel 1 or 2 for my microphone.

  However whenever I do a reading I can not simply take a while but only several points at once.

  10 is the minimum number of points I can get when I put the sampling of 100 and length frequency 0.1 in the VI of its acquisition.

  Any combination that translates into less than 10 points gives me an error (for example 100 sampling rate and duration 0.01).

  I thought that by indexing dynamic data to acquire its VI would solve the problem, but playback is differnet from that I get when reading lock-in amplifier

  through GPIB.

  (I'm testing with a locking amplifier which I can via GPIB interface.  So at the same time, I read with my sound card and the GPIB and compare graphs)

  Any way to read a point every time?  Or I'm getting something other wrong here?

  Thanks for your time!

  Looks like the CDA min frequency response of 10 Hz, pg 69 card technical:

  http://www.hardwaresecrets.com/datasheets/ALC888_1-0.PDF

  However, you can apply a known value of low voltage DC at the entrance to see if it reads properly micro. Note that microphones out low level signals, looks like the ADC full scale entry is ~1-1.5V so make sure that your entry does not exceed. You can use dividers of resistive voltage if necessary to reduce the input voltage.

  -AK2DM

• Receives the following message: procedure the directory of the dll entry point 'W' could not be located in the library of links Dynamics kernel32.dll.

  PROCEDURE ENTRY POINT SET THE 'W' DLL DIRECTORY COULD NOT BE LOCATED IN DYNAMIC LINK LIBRARY KERNEL32. DLL. MESSAGE APPEARS...

  PROCEDURE ENTRY POINT SET THE 'W' DLL DIRECTORY COULD NOT BE LOCATED IN DYNAMIC LINK LIBRARY KERNEL32. DLL. THIS MESSAGE APPEARS.

  Hello

  1. when exactly you receive this error message?

  2 did you a recent software or hardware changes to the system?

  3. are you able to start the system in normal mode?

  Method 1:

  If this a recent issue, then you try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates, that you have installed are removed.

  To run the system restore, you can consult the following link:

  How to restore Windows XP to a previous state

  Method 2:

  You can also scan SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  a. Click Start, click Run, type cmdand then click OK.

  b. in the sfc/scannow command line type, then press on enter

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

• Kernal32.dll / entry point Dllregisterserver was not found

  Photoshop on Win Xp,

  error: Kernel32.dll not found entry point.

  Then as an administrator at CMD prompt:

  Regsvr322 kernel32.dll

  Error: Kernel32.dll was responsible, but the not found Dllregisterserver entry point.

  Bought a 3rd partry to fix all Dll files. No help.

  Uninstalled photoshop, & fact Regsvr kernel32.dll, still the same error.

  Help, please.

  I appreciate any help in this matter.

  Thank you

  Thank you for your response. I just went thru full all the utilities patch update for win Xp, & that takes care of it. Thank you once again.

  Sent from my iPhone

• allocation of memory for the pointer in the dll

  Hello

  I am very new to LabVIEW and I was struggling with the third scheduled dll long enough. I am able to configure the device (but with a view of the insufficient resources error code), get the number of connected sensors and the ID of the sensor. But I can't receive data between the device and I think it might be the memory allocation problem.

  I use LabVIEW 2015 32-bit on Windows 10.

  This is the documentation provided by the seller, and the apdm_ctx_t seems to be a void pointer based on the API (typedef Sub apdm_ctx_t)

  APDM_EXPORT apdm_ctx_t apdm_ctx_allocate_new_context (void)
  Allocates memory a handful to be used by the libraries of the apdm.
  Returns
  Zero on success, zero otherwise

  Based on a previous post, I set up the return of the function above to be signed pointer size whole. And the following functions will receive this digital context and pass by value.

  In the attached png, the apdm_get_next_record requires a complicated structure. I have to do as a cluster and supply the function node (see figure).

  The sequence of the vi follows the Matlab code provided by the seller. I have no idea why the vi keeps returning the error code: no data received.

  Any thoughts would be great and I can give you more information if necessary. Thank you!

  Looking briefly at the provided code that I don't see glaring errors. Are you really sure that you do not have misinterprete all return as failuree values or maybe something in your actual System Setup prevents you to get the values you expect?

  You haven't really explained what you think you should get and what you get instead. The matlab example only also shows the use of apdm_ctx_autoconfigure_devices_and_accesspoint5() while you use apdm_ctx_autoconfigure_devices_and_accesspoint4() which I guess is not a big problem, as the example of Matlab is that pass an additional parameter to 0 to the function. However this example shows quite how you're supposed to call apdm_ctx_get_next_record() and then calls apdm_exit() to the end as you do anywhere.

  For now, it seems more a problem with the use of the functions of your DLL in the decree that something that should be fixed in nodes of library call to access your DLL and correctly. A suggestion to improve the screw, you have now would be to actually do the appropriate error handling. for now, these functions have nothing to do with the return value of functions. The right way would be to check the documentation and if a function returns or the return parameter can indicate an error for actually cause the error cluster spread a significant error code endorsements. And all functions except those which is intended to release all resources must have a business structure that incoming error, does nothing and doesn't send the error through.

  But don't blindly assume that, since the function 1 return 0, not for a mistake that all other functions are too. Some might actually return the number of resources found or whatever with 0 to indicate an error or no resources.

• Trying to read high millisecond cue point times

  Hello

  I'm learning the AC3. I use the script in a folder to read benchmarks in milliseconds. These cue points are defined by the code in a script of image in the main scenario like this:

  Create an instance of SoundSync
  var ss:SoundSync = new SoundSync();
  
  Instance allows you to add benchmarks for the audio file
  puts a cuePoint in the soundtrack to the location of millisecond after the comma

  ss.addCuePoint("someString1",01969);

  Here is the script of the AS file that reads these points of reference:

  net.quip.sound package

  {

  import flash.events.Event;

  import flash.events.TimerEvent;

  import flash.media.Sound;

  import flash.media.SoundChannel;

  import flash.media.SoundLoaderContext;

  import flash.media.SoundTransform;

  import flash.net.URLRequest;

  import flash.utils.Timer;

  SerializableAttribute public class SoundSync extends Sound

  {

  PROPERTIES

  private var _cuePoints:Array;

  private var _currentCuePoint:uint;

  private var _timer:Timer;

  private var _timerInterval:uint;

  private var _startTime:Number;

  private var _loops:uint;

  private var _soundChannel:SoundChannel;

  CONSTRUCTOR

  public void SoundSync (stream: URLRequest = null, context: SoundLoaderContext = null) {}

  Super (stream, context);

  init();

  }

  METHODS

  init

  private function init (): void {}

  _cuePoints = new Array();

  _currentCuePoint = 0;

  _timerInterval = 50;

  _startTime = 0.0;

  }

  Add Cue Point

  public void addCuePoint(cuePointName:String,_cuePointTime:uint):void {}

  _cuePoints.push (new CuePointEvent (CuePointEvent.CUE_POINT, cuePointName, cuePointTime));

  _cuePoints.sortOn ("time", Array.NUMERIC);

  }

  Get cue point

  public void getCuePoint(nameOrTime:Object):Object {}

  var counter: uint = 0;

  While (counter < _cuePoints.length) {}

  If (typeof (nameOrTime) == 'string') {}

  If (_cuePoints [meter] .name == nameOrTime) {}

  return _cuePoints [counter];

  }

  } Else if (typeof (nameOrTime) == 'number') {}

  If (_cuePoints [meter] .time == nameOrTime) {}

  return _cuePoints [counter];

  }

  }

  counter ++;

  }

  Returns a null value.

  }

  Get the Index of the current Cue Point

  private void getCurrentCuePointIndex(cuePoint:CuePointEvent):uint {}

  var counter: uint = 0;

  While (counter < _cuePoints.length) {}

  If (_cuePoints [meter] .name == cuePoint.name) {}

  return the meter;

  }

  counter ++;

  }

  Returns a null value.

  }

  Get the next Cue Point index

  private void getNextCuePointIndex(milliseconds:Number):uint {}

  If (isNaN (milliseconds)) {}

  milliseconds = 0;

  }

  var counter: uint = 0;

  While (counter < _cuePoints.length) {}

  If (_cuePoints [meter] .time > = milliseconds) {}

  return the meter;

  }

  counter ++;

  }

  Returns a null value.

  }

  ...

  Here's my problem: when I set a cue point that is a minute or more (in milliseconds) as in:

  ss.addCuePoint ("someString1", 107055); It is not processed by the script AS

  .. .the landmarks are not read (nothing happens).

  It's probably because I need to provide for this possibility in this file AS above. (This isn't my script, so I don't know how to adjust it. It's a good tutorial by David Stiller on the Adobe site: http://www.adobe.com/devnet/actionscript/articles/cue_points_audio.html).

  Can someone tell me how to adjust the script AS so I can read a cue point that goes beyond 5 places?

  Thank you very much!

  Human error. I wasn't conversion millisecond understaning. SoundSync AS code is is good. I need work.

• I notice on my screen when Windows XP starts, it reads: load the dll error, below him, he reads: Can t Load Res-dll, less than OK

  When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lok e-mail, etc.then, it disappears. Thanks for your help, as you can see in my writing I'm not veru computer savy.  Mike Sabol

  When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lok e-mail, etc.then, it disappears. Thanks for your help, as you can see in my writing I'm not veru computer savy.  Mike Sabol

  Hi Mike... When the pop-up window appears at the top of the pop-up window, it should tell you the name of the software that is associated with the dll missing/corrupted. Please look and see if it is listed, and then tell us what software. Make sure that you list the full error message.

  In addition, do you use a Linksys router to connect to the internet? You should also do a scan with Malwarebytesmalware. It doesn't matter what other scanners you used. Scan with Malwarebytes. Thank you.

• ADVAPI32. DLL - the entry point of procedure not found in the dll

  I just updated my OS from Win XP x 64 for Win 7 x 64. On my XP, I had a program called VVD works just fine. The software is protected by HASP device.

  When you install the VVD on my new operating system, at the end of the installation, an error message comes up with the title "ADVAPI32.dll" followed with a red circle with a white "x" mark and text "the entry point of procedure not found in the dll."

  According to the Publisher of the software, the program is running (and install) free disorder on many machines x 64 Win7 so there must be something special on my PC.

  Shoul, I try to replace the file? How do I do that?

  Any help is greatly appreciated.

  Hello.

  I just did a clean boot and tried to install the software. I got the same message: "the procedure not found in the dll entry point." This message appears at the end of the installation during "update system configuration. Please wait. »

  I don't think that I have no viruses. I run Microsoft Security Essentials on my machine. In addition, installation also failed on two other Win7 computers with the same message. I tried to install the software in all kinds og compatibility modes but keep getting the same exact message. Is there another way/method I could use to isolate the problem?

  The problem is now resolved after SafeNet has released a new version og the pilot.

  Thank you for the effort.

• Why do I get 'Bad call Dll Convention'?

  Hello

  the gall attached contains an experimental to read dll in LV 8.6 and use in VB6.

  The zip file contains the vi (adding 2 numbers), LV, VB6 project.

  The service seems to work.  He adds the numbers, but still, it gives the error "Bad dll calling convention".

  I think I did good. I used the Conventioin of the Standard call.  I used Double in LV and long in VB.

  How can I get rid of this error?

  Sombody allows this example on his machine.  Maybe it's something to do with my specific machine?

  VB usually gives the error "Bad DLL calling Convention" when you said an incorrect function.  This can be as simple as exporting with __cdecl instead of __stdcall (although this will crash more likely only), or it could be that because of the function declaration to say the battery is placed in a terrible state because the DLL call placed more or less data on the stack that VB should based on your statement.

  In your specific case, I see a few problems.   For reference:

  In LabVIEW, is your equivalent C function prototype as shown in your project file:

  Double AddNumbers (double * xY, double x, double y)

  In VB, your statement is:

  Declare Sub AddNumbers Lib "D:\NI Projects\eDAS400\DLL\LVDLL Experiment\SharedLib.dll" _

  (ByVal x As Double, ByVal y As Double, xy As Double)

  The first "double" in the C prototype means that the function in the DLL call will return a double.  In your VB prototype, by declaring "Sub" you are, in essence, says VB you don't expect the DLL to return data.  It is a likely cause of your error.  To resolve this issue, change to say "Declare function", and then add 'Double' at the end of the statement.

  The second problem I see is that in your prototype C, the first parameter is passed by reference (like a pointer).  However, your statement of VB, passes all ByVal.  You must change this option to make the parameter that returns data (in this case xY) is passed ByRef.

  Finally, it seems that your parameters in the function of C are probably not in the order that you expect.  I expect to be x, y, xy (which you have in the VB declaration), but the order in the C (ie. in the DLL) function is not the same.  This results in a funny behavior.  The order must match between the two.  To resolve this, I recommend you actually change the LV DLL so that settings are exported in more logical x, y, xy order.

  I think this should take care of your problems.  Sorry so lengthy, but I wanted to make sure that you understand the 'why' on this one because it can be a common error trying to create/call VB dll.

  Jason

• How to call a DLL function that has need of an array initialized structures which can be written in by the DLL?

  I need to call the following function in a C DLL:

  __declspec (dllexport) int MSIL_EnumSpectrometers (SPECTROMETER_ID * spectrometers);

  where the only parameter is a pointer to:

  typedef struct
  {
  tank model [32];
  series char [32];
  Channel int;
  } SPECTROMETER_ID;

  Before LabVIEW 2011 I would use a CIN allocate the memory and call the function, but in LabVIEW 2011, the INC has been deleted and I have to use a library function node call instead. When I go to set the parameter, it seems that I need to set the type to "Adapt to the Type" and data for 'Pointer to data in table' Format, then pass an initialized array of SPECTROMETER_ID with the many elements he so the DLL can fill the table with data. (See the attached picture.) When I do that, however, it blocks LabVIEW desktop.  I guess it is because the DLL is corrupting the memory space of LabVIEW, but I don't see why, because I'm basically passing in a void pointer to an array initialized in the right size. Note that the first node of NSI returns the number of elements required in the table.  Anyone have any idea what I'm doing wrong here?

  In LabVIEW, when a table is in a cluster - cluster don't detain actually table but sort of a pointer that points to the table. If you need the cluster to contain 32 to 32 Add to the cluster. See the VI attached to how it's supposed to be done.

• So, if I'm reading this right... The kernel image

  So, if I am correctly reading what it points directly to the nVidia card in my Mac Pro? He panics again running Final Cut Pro, I'd lock up with the screensaver also. I turned off the screen saver and it remains standing, but run you whatever it is graphics intensive and it crashes...

  Anonymous UUID: 8B63304B-E169-E393-C7F1-816D8A446C8A

  Wed Apr 27 08:39:58 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff7f8a382fb9): NVRM [0 / 3:0:0]: read error 0 x 00070000: 0xffffffff, 0xffffffff, 0xffffffff, BAR0 CFG 0 x 92000000 0xffffff91bc3c9000 0x092100a2, D0, P1/2

  Backtrace (2 CPU), Frame: Return address

  0xffffff91bb86a760: 0xffffff80096dab12

  0xffffff91bb86a7e0: 0xffffff7f8a382fb9

  0xffffff91bb86a8a0: 0xffffff7f8a6a120c

  0xffffff91bb86a8e0: 0xffffff7f8a5d3ea1

  0xffffff91bb86a930: 0xffffff7f8a646fa9

  0xffffff91bb86abe0: 0xffffff7f8a6471b2

  0xffffff91bb86acd0: 0xffffff7f8a42a71b

  0xffffff91bb86ad50: 0xffffff7f8a3543b3

  0xffffff91bb86adf0: 0xffffff7f8a35d2e3

  0xffffff91bb86aeb0: 0xffffff7f8a387d38

  0xffffff91bb86b0b0: 0xffffff7f8a38991f

  0xffffff91bb86b1a0: 0xffffff7f8b263c38

  0xffffff91bb86b220: 0xffffff7f8b26595e

  0xffffff91bb86b2b0: 0xffffff7f8b27de74

  0xffffff91bb86b2f0: 0xffffff7f8b262bf0

  0xffffff91bb86b390: 0xffffff7f8b2955f0

  0xffffff91bb86b5c0: 0xffffff7f8b28ece2

  0xffffff91bb86b730: 0xffffff7f8b277f82

  0xffffff91bb86b790: 0xffffff7f8b2902a3

  0xffffff91bb86b820: 0xffffff7f8b2781f5

  0xffffff91bb86b880: 0xffffff7f8b278b16

  0xffffff91bb86b8d0: 0xffffff7f8b278e6b

  0xffffff91bb86b940: 0xffffff7f8b2796e5

  0xffffff91bb86b980: 0xffffff7f8b2464d0

  0xffffff91bb86bb00: 0xffffff7f8b24502b

  0xffffff91bb86bb50: 0xffffff8009ce0926

  0xffffff91bb86bb80: 0xffffff8009ce21f0

  0xffffff91bb86bbe0: 0xffffff8009cdf277

  0xffffff91bb86bd20: 0xffffff8009797cc0

  0xffffff91bb86be30: 0xffffff80096df283

  0xffffff91bb86be60: 0xffffff80096c28b8

  0xffffff91bb86bea0: 0xffffff80096d2665

  0xffffff91bb86bf10: 0xffffff80097b8bda

  0xffffff91bb86bfb0: 0xffffff80097eca96

  Extensions of core in backtrace:

  com.apple.nvidia.classic.NVDAResmanTesla (10.0) [05FC5D7E-BB0B-3232-BBBD-8A49B687 0D8B]@0xffffff7f8a32c000-> 0xffffff7f8a5a1fff]

  dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f89f57000 0xffffff

  dependency: ffff7f8a31c000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f8a2d5000

  com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [CA 56199, 6 - 3C8D - 3EBB - B5EF - 7B1B467 8ACF9]@0xffffff7f8a5ac000-> 0xffffff7f8a859fff]

  dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f8a32c000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f89f57000 0xffffff

  com.apple.GeForceTesla (10.0) [01260884-60E9-35E1-A16A-70AE3322356C] @0xffffff7f8b 233000-> 0xffffff7f8b2fefff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f89f57000 0xffffff

  dependency: ffff7f8a31c000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f8a2d5000

  dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f8a32c000

  Corresponding to the current thread BSD process name: Final Cut Pro

  Boot args: arch = x86_64

  Mac OS version:

  15E65

  Kernel version:

  15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

  Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

  Slide kernel: 0 x 0000000009400000

  Text of core base: 0xffffff8009600000

  Text __HIB base: 0xffffff8009500000

  Name of system model: MacPro3, 1 (Mac-F42C88C8)

  Availability of the system in nanoseconds: 86102959281854

  last load kext to 85538288265591: com.apple.driver.IOBluetoothHIDDriver 4.4.4f4 (addr 0xffffff7f8bd59000 size 73728)

  Finally unloaded kext to 71489689556814: com.apple.driver.IOBluetoothHIDDriver 4.4.4f4 (addr 0xffffff7f8bd59000 size 73728)

  kexts responsible:

  601.01.20f01 com ESET.kext.esets - kac

  601.01.20f01 com ESET.kext.esets - pfw

  com Aladdin.kext.aksfridge 1.0.2

  com TrustedData.driver.VendorSpecificType00 1.7.0

  com Apple.filesystems.msdosfs 1.10

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.GeForceTesla 10.0.0

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleHDA 274.7

  com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleIntel8254XEthernet 3.1.4b1

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.usb.AppleUSBOHCIPCI 1.0.1

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1

  com.apple.BootCache 38

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleIntelPIIXATA 2.5.1

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.IOBluetoothHIDDriver 4.4.4f4

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.iokit.IOSurface 108.2.1

  com.apple.driver.CoreCaptureResponder 1

  com Apple.Driver.corecapture 1.0.4

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 274.7

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.iokit.IOBluetoothFamily 4.4.4f4

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleHDAController 274.7

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOHDAFamily 274.7

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.driver.CoreStorage 517.20.1

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.driver.usb.AppleUSBOHCI 1.0.1

  com.apple.iokit.IOATAPIProtocolTransport 3.5.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IOFireWireFamily 4.6.0

  com.apple.driver.usb.AppleUSBUHCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IOATAFamily 2.5.3

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  NVIDIA did not have a driver for Tesla for AFAIKT 10,11 and no mac delivered by Apple with a map of Tesla (yet once AFAIK) If you are doing something you could do before and you updated recently?