reading a table

Similar Questions

• How to read the table of string returned by the DLL

  I developed DLLS in labview that takes 2 input parameters as a string and returns an array of strings in return. How can I read back this array returned strings in labview? I tried to return a string and I can't able to read. But how to read a table?

  Is the signature of the function – void GetLoginInfo (char [] DBPath, char [UserName], LStrHandleArray * table)

  Shrinivas

  I found the solution. When you configure the node to call a library function, the argument (in which we expect an array of string) type should be chosen as "Adapt to the Type" and data format to be "pointers to the sleeves.

• Devantech TPA81 read temperature table "physical channel be unspecified.

  Hi, I'm new to Labview.

  I need to use a heat of TPA81 sensor in my Dani robot project, so I found the 'Devantech TPA81 reading temperature table' example in examples of robotics. I connect my sensor with a USB - I2C converter and then connected to my PC. I run the program, but the problem "the physical channel is not specified" still exists. How to choose the physical channel in labview for the clock channel and the data channel?

  Could someone please help me and thank you in advance.

  Jason

  Hello.

  The example given here "Matrix of the temperature read Devantech TPA81", works with acquisition cards supported by the driver "DAQmx" therefore, I think that this will not work with a simple "USB - I2C" converter.
  Now, on the other hand, if you just want to work with the "TPA81" sensor in the robot, DANI, you could see the example "Devantech TPA81 (FPGA). Lvprog' in the help of LabVIEW, where, in the "target FPGA", you will find the VI "Devantech TPA81 (FPGA). saw', where you can configure the channels (data and clock).

  

• WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page

  Hello community,

  We went just to ESXi 5.1.0 build-1021289. We have installed MEM 1.1.2 and used to configure all of the iSCSI network and has chosen to use our BCM57810 10G cards for unloading rather than use the SW initiator. We are currently on firmware 5.2.6.

  We now see this error constantly in the vmkernel logs.

  2013-05 - 04 T 21: 06:40.074Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 338 expected)
  2013-05 - 04 T 21: 06:40.074Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.085Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)
  2013-05 - 04 T 21: 07:08.085Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.091Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)
  2013-05 - 04 T 21: 07:08.091Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.099Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)

  We did all the additional configurations generally suggested - disabled ACK delayed, disable LRO, iSCSI timeout.
  I can't tell if it's having an impact on our performance or reliability. He sees not to be. However, these errors constantly fill our vmkernel logs.
  Out of curiosity, I went our adapter SW config and I do not get these more. We would really prefer to use unloading iSCSI broadcom cards now that the frames are supported. Has anyone seen else this error or know how I could get more details about this?

  ESXi 5.1.0

  Build-1021289

  The problem is the new broadcom driver, when you use the mode of unloading iSCSI.  VMware and Broadcom to release a patch.   For now just use the iSCSI SW.

• Deleted lines flashback: unable to read data - table definition has changed

  Hi all
  
  Its really Important.
  
  I unfortunately truncated a table using
  Trancate table mytable;
  
  and made an alter table to reduce the length of the pricision data.
  
  But I need back data of tabla
  
  I used the command to get the deleted lines, below, it shows error.
  
  query: select * from pol_tot versions between timestamp systimestamp-1 and systimestamp;
  error: ORA-01466: unable to read data - table definition has changed
  
  query: flashback table pol_tot to timestamp systimestamp - interval '45' minutes;
  error: ORA-01466: unable to read data - table definition has changed
  
  Well want to share your ideas how can I deleted thoose Records.
  
  Edited by: 887268 July 8, 2012 12:26

  This

  and Made a alter table to decrease data pricision length.
  

  is the cause of your error.

  Now please do what is obvious.

  -------------
  Sybrand Bakker
  Senior Oracle DBA

• Static display LOV discriptions in a read-only table

  Attempts to display a read-only table. The user will then select a line to edit.
  
  If the table is editable the LOV displays very well. If it is read-only, it shows only the raw values. The majority of my LOV is static.
  
  Is there a way to display descriptions instead of the ID?
  
  see you soon
  James

  In the view object, define a list of values in the field (as usual).

  When you create the table, remove the default column (in general the output text) and replace it with a single column select (should be automatic if the view has the LOV - so drag and drop)

  Now, open the properties of the field by selecting the poplist in the column and change the unique selection of read only = true.

  It will be much better that decode, who has a number of fixed - so it's the table led - as records are added - the list will always work.

• How to display a LOV display attribute in a read-only table?

  Guys and girls,
  
  With the help of Studio Edition Version 11.1.1.3.0.
  
  It seems that there is a certain messages on the forums about something similar to this, but nothing (that I can find) involving really read only tables.
  
  I have a tree table which shows a BOM. A BOM is a list of raw, subassemblies, assemblies, intermediate, sub-components, components, parts and the quantities of the two required for the production of a finished product.
  
  In this table tree, PARENT, CHILD, and QTY columns are displayed and are held in the BOM table. PARENT and CHILD have a LOV defined with a NAME attribute, which comes from the object View of PARTS. When I view the table tree on my. JSFF, PARENTS and CHILDREN show their number of DBSequence which had been assigned to them and is stored in the Schedule table, as opposed to the value of NAME through their LOV. A user would probably as the component name, rather than the sequence number.
  
  I could simply add this attribute of NAME in my view BOM with a JOIN clause object and display it like that, but it feels as if I am needlessly complicate my view object.
  
  How can I display the Display NAME attribute in a read-only table?
  
  Thank you
  Will be

  Hi Will,

  I'm sure you'll be stuck with that in a situation of read-only. You can bring in the description as a reference attribute in your VO, and it should work.

  John

• SelectOneChoice and read-only Table

  Hi Experts,
  
  I am very new in ADF and try to put up a form that contains a component of SelectOneChoice based on a display object.
  I have a table with a variable binding and try to run the Object(underlying read-only table) view with the value that is selected in SelectOneChoice read-only. I added a managed method bean on valueChangeListener control SelectOneChoice and successfully getting the selected value.
  Now I'm getting a reference to the ViewObject and layout NamedParameter and then running it. Here is my code:
  
  {} public void ChangeValue has only (ValueChangeEvent valueChangeEvent)
  int s = ((Integer) valueChangeEvent.getNewValue ()) .intValue ();
  BindingContainer links is BindingContext.getCurrent () .getCurrentBindingsEntry ();.
  JUCtrlListBinding listBinding = (JUCtrlListBinding) bindings.get ("SanLovVO1");
  listBinding.setSelectedIndex (s);
  currVal int = Integer.parseInt (listBinding.getSelectedValue () m:System.NET.SocketAddress.ToString ());
  System.out.println ("selected value:" + currVal);
  
  DCBindingContainer bc = (DCBindingContainer) (BindingContext.getCurrent () .getCurrentBindingsEntry ());
  ApplicationModule am = bc.getDataControl () .getApplicationModule ();
  ViewObject vo = am.findViewObject ("SR1");
  vo.setNamedWhereClauseParam ("p_san_header_id", currVal);
  vo.executeQuery ();
  }
  
  I defined a variable binding (p_san_header_id) in the object View (SR-1), then using this variable of liaison with the query of the view object. I also give a default value to the variable binding.
  Now the problem is: when page gets loaded, I can only read table has records but when I select a value in SelectOneChoice, I am not able to see changed in the table read-only if get running code managedBean and autoSubmit is true for SelectOneChoice.
  
  Pls help me. This is my first attempt in ADF with Jdev 11.1.1.2
  
  Thank you
  Sumit

  I put the default value based on the value returned by the database for selectOneChoice on the loading of the page. I just determine the index value of the corresponding value coming from the db and put it in the page scope of stream.
  Then, I put it in the value of the selectOneChoice attribute.
  

• READ the TABLE of another schema

  Hello
  pls help me.
  
  I want to read the table of another schema that is declared in the application of the apex.
  
  SELECT * FROM DBA_ROLE_PRIVS;
  (SELECT * FROM sys.) DBA_ROLE_PRIVS: auch bad)
  
  The owner of this table is SYS.
  
  Error: The Table is unknown or cannot be found.
  
  my real schema is GCs.
  
  How is the select statement for this case for reading in the table (or tableview) of another schema?
  many and many thanks for your help.
  TL

  The SYS schema is a special schema in Oracle. You must explicitly grant the user rights by selecting tables and views sys.

• Why the SD-R6112 drive will not read the table of contents through DVD Decrypter?

  Why the hell used my reading of DVD-ROM/R/RW Toshiba SD-R6112 the TOC through DVD Decrypter?
  She normally does! I use nero, Decrypter, DVD Shrink, and even Windows medai Player 9 series.

  It was working fine 2 days ago now pfft, will not work. Everything in the settings of the device checked, said everything works properly without conflicts. I unloaded the driver and rebooted then loaded it, same problem. I tried a disk driver that came with my laptop and is responsible, it is very good, so I take this CD work correctly, but won't load DVD. With DVD Decrypter, it says: could not retrieve the table of contents.

  There must be a solution!

  Hello

  Are you trying to make illegal copies of DVD? ;)

• Reading a table of labview

  I have a VI in labview that accepts an array of a .NET and reading it with DAQmx, a value of every millisecond.

  I do the same thing with Veristand 2011, programmatically.

  As far as I understand it, looks like I can do this in 2 different ways:

  (1) write some files that the stimulus profile editor can read and open it with the stimulus API profile editor

  (2) a custom device and use an entry for the table

  Am I missing something? I'm a noob with Vstand.

  THX,

  Matteo

  There is an example of the expedition which does almost exactly what you want, and could be a good starting point of reference. It does not even require any written stimulus profiles or sequences in real time, because a real-time sequence comes with VeriStand designed for purposes of reading, and this example uses this one directly.

  See: \examples\NI VeriStand\API\Execution API\Sequences\Play Waveforms\Waveform player Example.vi.

  The only difference is that this example is based on the type of waveform data, that has a setting dt and t0 in addition to the values there. But it's a trivial change to make.

• 1st reading the table

  I'm currently reading the first reading greater than 0.5 in each column of the table.

  

  

  Like this?

• Table of index always returns zero when reading the table 3D

  I have a 9 x 2000 x 5 table table 3D diamension.  I have this table filled with data and when I try to read a data point unique on the table the function Index Array always reads zero. I place a probe on the 3D input array and when I put in the index of the probe to the same data point the probe shows the value stored in the table. I also have an indicator showing the 3D table and it displays data in all locations. For example if I try to read the location 0, 144.0 in 3D it array always return zero. Yet I know that the value of this element is 6.8616E - 5. Each item I try to retreave table gives zero.

  Anyone saw the Index room table this kind of behavior?

  Problem solved. As usual, it was pilot error on my part had knocked down the lines of lines and columns.

• Dynamically read the table name in the query update

  Hi all

  I am trying to run the updated sql query where the name of the table should be read dynamically from another table below.

  Please let me what wrong with my request.

  setting a day (select CONCAT('T',schemaid) from outline, which the name = 'Analyzer') set c7 = 99;

  "outline" is a table that contains two columns name and schemaid.

  all the table created in our database with the prefix 't' T4345 for example.

  I did as suggested by you

  No, you didn't.  I did not any package creation code in my example, in order to better that you you point the finger.

  Your syntax is invalid for creating a package with the code like this, please read on creating packages and procedures within them if that's what you want to do.

  In addition, your package creation statement is to create a package specification, but you put in the code which must be in a package body, not a notebook loads.

  It should be something like (untested since I don't have your tables)...

  create or replace package my_packg as
  procedure dowhatever.
  end;
  /

  create or replace package body my_packg as
  dowhatever procedure is
  TBL varchar2 (30);
  Start
  Select 't' | SchemaId
  in tbl
  of outline
  where name = 'Analyzer ';
  run immediately 'Update'. "TBL |' set c7 = 99;
  end;
  end my_packg;
  /

  and then call this procedure by calling my_packg.dowhatever ();

• Advanced reading single Table field

  Hello

  I use SPEL binding to set the read attribute only to a text field that becomes editable when certain conditions are met.
  However, the field is a search criteria for the advanced table and when I search a few lines that they are read-only. The search criteria is also ready only

  

  If I select a line and click on change, the search criteria becomes editable.

  How can I solve this error?

  

  Varun,

  1. from the page that looks like you are NOT advanced table, you use table, right? I think you are referring to advanced search?

  The behavior you're seeing is because the same pitch is used for research and the table of results. And you have a spell on this column.

  Try to implement the steps below and see what happens.

  1. remove the fate of the field.

  2. Add the fate programmatically using the DataBoundValue as below [for example, I used ActualFlag MessageChoice]:

  OAMessageChoiceBean messageChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("ActualFlag");
  if(messageChoiceBean != null)
  {
    OADataBoundValueViewObject actFlagDataBound = new OADataBoundValueViewObject(messageChoiceBean, "customReadOnlyAttr");
    messageChoiceBean.setAttributeValue(oracle.cabo.ui.UIConstants.READ_ONLY_ATTR,actFlagDataBound);
  }
  

  If the above change works, do the same for all lines you need the fate and active research.

  Let us know how you go.

  See you soon

  AJ