Realtek RTL8151GH-CG bluetooth?

Similar Questions

• Realtek rtl8151gh-cg

  I'm no decommissioning of my hp pavilion 500-210 for windows 7.  But I can't find the drivers for the Realtek RTL8151GH-CG network controller.  I have check the realtek website and I can't find the exact model number.  In addition, I can't find the right driver for USB 3.0 on board or another, someone has an idea?  The motherboard number is IPM87-MP.  Thank you.

  Hello:

  You can get the usb 3.0 Intel driver if this Council has controller intel usb 3.0.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3467 & DwnldID = 22824 & Keyword = Intel + USB + 3.0 + stretch + Host + Controller + Driver & lang = eng

  Have you tried the PCIe gigabit ethernet driver realtek even though it does not register this nic model?

  Try a 3rd on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

• Realtek RTL8151GH-CG do not connect 5 GHz

  I don't have a new HP Pavilion 500 - 369 desktop products. G4A94AA #ABL with, according to the page of the specifications of HP, a network adapter Reattek RTL8151GH-CG and it does not see the 5 gHZ band on my dual band of AC1900 D-Link router. When it is connected with an ethernet cable he sees only the 2.4 gHz band.

  This network adapter has 5 GHz capabily? If so how do I get it to work on the 5 GHz band?

  I have an old product HP Pavilion Elite HPE - 502c not. QP698AA #ABC and he saw two bands immediately.

  Hello:

  According to the product specifications for your model on the link below, it has a single band (2.4 GHz only) for wireless with bluetooth card.

  http://support.HP.com/us-en/document/c04318929

• HP Envy 700-327c: Realtek RTL8151GH-CG

  So I just got this office of second hand without a hard drive so I put a new in reloaded windows with the cd key on the side of the tower and when I booted the system up, I noticed six devices without drivers.

  List

  Blutooth controller

  Ethernet controller

  Network controller

  PCI Simple Communications controller

  SM Bus controller

  (USB) Universal Serial Bus controller

  All listed so I jumped on the HP site and load the drivers from the website well is when things went from bad to worse. I managed to get everything except the SM Buss and PCI Simple communication drivers on the hp site I was able to find the rest of them without too much trouble and had all this work.

  Then, I hit windows update and just a flood of errors which none come into play THAT AFTER I installed the drivers. I even went to the length of the purchase of a NEW copy of windows 7 just to play it safe because I didn't know the State of the series on the side of the case and even if he says he's active, I realized that the devil may be that is the question.

  I ran SFC he didn't found any problems with the installation I used a number of tools from microsoft to attempt to repair that I managed to go up to SP1 before my update of windows would just stroll on the updates. Yet once, I guess it's the drivers because none of this started after I installed the drivers. Anyone has any ideas on this one?

  Finally solved the problem after installing SP1, I just let it check the updates at night and this morning about 10 hours later he finds updates and worked without problem.

• HP 15 laptop: update Windows 10 fall/TH2 deleted Realtek driver bluetooth... no idea what to do?

  Hello

  After updating Windows 10 with the release of the fall/TH2, I get the message at startup which "Realtek driver for bluetooth has been removed because it is not compatible" or words to that effect. Clicking the notification takes you to a page of MS saying that this app is not compatible. Device Manager still showed a card Realtek Bluetooth 4.0, but only this point and says that it works but bluetooth does not work. When the pc is searching for bluetooth devices it find a little but now my phone. The driver version is 1.3.875.3. He never successfully connected anyway, strange with a phone of Lumia and windows OS, however it would allow you to manually request a file transfer. Now it no longer works. Realtek page does not seem to have any driver bluetooth downloads, HP support assistant finds no new software update driver/bluetooth and I don't see not all the drivers on the HP Web site either, so I'm stuck. Any help appreciated.

  Problem seems to have been resolved since Windows 10 update KB3118754. Phone won't always sync but the error message about the Realtek driver/app bluettoth ceased to appear and I can now transfer files but using the manual method "receiving files."

• How to install Bluetooth on Windows 8 - S50 - A Satellite - 10 p drivers

  I bought a Toshiba Satellite S50 - A - 10 p, PSKJQE part number.

  I installed Windows 8 x 64 and everything works fine except for the Bluetooth adapter.
  I found that it is a combo of Atheros adapter, but I can't seem to make it work.

  Can you guide me please on the resolution of this problem?

  Thank you very much!

  [Turn on the Bluetooth feature after a clean install of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]

  If a new installation of Windows 8 was made, the Bluetooth is not present and does not work on your laptop. It is necessary to install two driver components manually to enable the Bluetooth feature.
  -Driver Toshiba system
  -If your laptop is equipped with a card Atheros or Realtek WLAN with Bluetooth, you must download the Atheros or Realtek Bluetooth driver filter
  -If your laptop is equipped with an INTEL WLAN with Bluetooth card, you need not download any driver filter

• Satellite Pro L850-12 q - acpi Bluetooth driver installation

  OK so I got this laptop a few months ago one decided to clean install windows 8 less the bloat-ware of Toshiba :)

  So I install my amd drivers chipset and graphics and wlan Bluetooth however when I run windows update it shows me a driver bluetooth acpi about 109 k of optional size sometimes on installing windows, it has been in the important section in any case more often than not, I get a failure to install from windows update and I was wondering if anybodt here knew what driver I needed outside support section the bluetooth stack?

  Check out this FAQ from Toshiba:

  + Enable the Bluetooth feature after a clean install of Windows 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB2C03FI0001R04.htm

  You need to download the driver of Toshiba system, if you use Win 8
  If your laptop is equipped with an INTEL WLAN with Bluetooth card, you don't need to download any driver filter. Just install the driver of Toshiba System.

  If your laptop is equipped with a card Atheros or Realtek WLAN with Bluetooth, you must download the Atheros or Realtek Bluetooth filter driver (suitable for your device)
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

• Problem installing Bluetooth with Satellite C875 - 136 PSCBCE

  Satellite C875-136 PSCBCE-01J002FR

  Hello

  I have a problem with the installation of the Bluetooth driver.

  I tried to install the driver bluetooth on Windows 7 x 64 but the freezing of the "driver installation" installation in Toshiba Bluetooth monitor

  I have installed Realtek WLan, battery Bluetooth Realtek and after the Toshiba Bluetooth monitor.

  Do you know how to solve this problem?

  I tried also with the Toshiba Bluetooth monitor v9.

  Installed files:
  http://Support1.toshiba-tro.de/Tedd-...0510093258.zip
  http://Support1.toshiba-tro.de/Tedd-...0510084139.zip
  http://Support1.toshiba-tro.de/Tedd-...0914172315.zip

  Hello

  The point is that you have installed the BT tools and software in disorder

  To get the BT working, you need to first install the Realtek Wireless LAN Driver then the
  Driver Realtek Bluetooth package filter then battery Toshiba BT
  The reason is that mobile use a WLan / BT combo card.

  The application of the monitor BT transforms the Bluetooth module power in conjunction with the Bluetooth stack.
  If its not really necessary get the BT working.

  Here you can find the BT portal, including the BT stack!
  http://APS2.toshiba-tro.de/Bluetooth/?page=download-Toshiba

• HP ENVY at Quad Win 7 bluetooth adapter

  Hello

  I have problems to activate BlueTooth on my new HP ENVY 15 t Quad with Win 7 Pro 64 installed OS.

  The laptop is equipped with a card 802.11b/g/n WLAN [1 x 1], Device Manager indicates this device as a 8188EE Realtek RTL 802.11bgn Wi - Fi adapter. Apparently (Internet sources) this map is compatible Bluetooth.

  However - Device Manager tilts not Bluetooth and I can't find how to activate Bluetooth on this laptop, Wi - Fi, very good - but not Bluetooth functions.

  So:

  8188EE Realtek RTL supports BlueTooth?

  If so, how can I activate it?

  Thanks, if I wouldn't contact the support to do this.

  Yep, that is...

  Here is the link to the service manual for your HP ENVY 15 t-j100 Quad Edition CTO Notebook PC.

  http://h10032.www1.HP.com/CTG/manual/c03943414.PDF

  Chapter 3, page 23 lists the supported cards wireless and wireless/bluetooth combo with their HP part numbers.

  Chapter 5, pp 44-46 rprovides the WLAN card R & R procedures.

• HP 15-af024AU APU Quad Core A8: How do I start bluetooth on HP-15af024AU

  I bought the laptop mentioned above by looking at its specifications. It includes no bluetooth services. However, there are no button or any other provision to start despite the display shows the icon of bluetooth and its equipment after searching for him. While trying to receive or send a file it just keep on searching for devices with no action to find.

  This problem can be solved?

  hnk_001 wrote:
  I use Windows 7 as my operating system, as it was required for the software of the company that I work for. By default, it's Windows 8.1 with the drivers you mentioned above. Still, I wasn't able to start the Bluetooth which remains the main problem today.

  Thank you.

  OK that makes a difference in your ad says you were Windows 8.1 in the future poster putting the correct o/s using your will help others to find the correct drivers.

  Here is the driver Win7

  Realtek RTL8723BE driver Bluetooth

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72552.exe

  Be sure to uninstall the old driver Bluetooth before installing it. I looked and they both look like the same driver?

• not found Bluetooth software license

  HP Pavilion g7-1310US for windows 7 64 bit laptop. whenever I reboot the message (Bluetooth software license not found [2]).

  You need to reinstall Bluetooth drivers. Install the updated drivers from the link depending on the bluetooth device installed on your device.

  2011 Ralink 802.11 b/g/n WiFi Adapter
  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56036.exe

  Driver Broadcom Bluetooth 4.0
  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55079.exe

  Atheros Bluetooth driver
  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55212.exe

  Intel PROSet Bluetooth Driver
  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54901.exe
  Realtek Motorola BC8 Bluetooth 3.0 + HS pilot
  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52850.exe

• Do not install Toshiba Bluetooth stack

  I installed the filter realtek and atheros bluetooth driver package, but when I try to install Toshiba Bluetooth Stack, the installation went to 99%, then the installing bluetooth driver window appears and remains at 25% forever. To get out of this situation, I click Cancel tot the driver installation window. Installation of the battery then said I have to restart my computer for the changes to take effect. The pilots and the battery are all ok - toshiba support site, 64-bit, for my laptop.

  I tried to install the bluetooth stack with just atheros driver mounted, with only realtek deriver, and with no prior bluetooth driver install. The behavior is the same. In the Device Manager a generic MS driver instaled. I tried to uninstall the generic driver and installing the atheros realtek or stack (on sepparate attempt of course). MS default driver is still installed instead of the specified driver. And, of course, with the battery, I get the error mentioned above, with no instalation driver successful. I tried to update the driver from the Device Manager, not through windows update, and pointing to the folder with the desired drivers, nothing works. The default MS driver is installed.

  The problem I want to address is that even though I have bluetooth in the system tray icon, and I can select different options, (do not know if it is functional, as I have no Bluetooth device), is that when I want to use something from the software of bluetooth in the start menu, all programs bluetooth go in install bluetooth driver. So if I double-click Bluetooth settings, the windows account control screen appears. I click on accept, and toshiba begins to install the same driver, as shown above, with the same result - eternal timing.

  Laptop - Toshiba Satellite C855-1KP, Windows 7 Home premium 64-bit, Bitdefender total 64-bit security 2013

  I had exactly the same behavior with my laptop (C850-177).

  There is probably a bug in version 8 of Toshiba bluetooth stack. Just download version 9 from toshiba support site and you will have Bluetooth stack of work:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?PF=true&soID=3461138

• Laptop HP 15-f111dx: 10 windows clean install

  My laptop came originally with 8.1 Windows preinstalled (purchased in 2014). Last year, I did the free update for Windows 10. I also did the original OS HP Recovery disks for the supplied Win 8.1 system with my laptop, and I did the 10 Windows upgrade USB recovery.

  My question: I plan to do a Windows 10 'clean install' because I don't think I necessarily need ALL the pre-installed software HP initially installed on my computer, which of course remained after I did the upgrade to win 10. However, my question is if I do a clean install, I'm aware that NONE of the software original HP and drivers (including the HP Support Assistant who helps with updates software/driver) would be installed.

  I have concerns not to get the updated drivers if I did a clean install.  I assume that there is no possible way to later install SOME of the software that came with my original installation, as the DVD burning software (CyberLink), Foxit Phantom PDF program, etc.

  Can someone shed some light on this topic, especially if you did a clean install of win 10? Thank you.

  Hey there @jrobbie82.

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP's Support and I understand that you are wanting to do a clean install of Windows 10.

  You said "my question: I plan to do a"clean install"Windows 10 as I don't think I necessarily need ALL the preloaded software HP initially installed on my computer, which of course remained after I did the upgrade to win 10. However, my question is if I do a clean install, I am aware that NONE of the drivers (including the HP Support Assistant who helps with software/driver updates) and software original HP would be installed".

  Here's what I found for you. The rest is up to your own discretion:

  Here is a link to the HP Support Assistant.

  This is your page HP for laptop - 15-f111dx (ENERGY STAR) software and driver downloads . You will see that there are 10 for Windows downloads:

  • CyberLink Youcam software
  • Software from CyberLink PhotoDirector
  • CyberLink PowerDirector software
  • Media Player CyberLink Power

  More drivers for:

  • Driver Audio Realtek High definition (HD)
  • AMD graphics driver high definition (HD)
  • Synaptics Touchpad Driver
  • ALPS Touchpad Driver
  • Wireless 802.11b/g/n Realtek RTL8723BE/RTL8188EE LAN drivers
  • Realtek RTL8723BE driver Bluetooth
  • Realtek LAN driver (LAN)
  • Realtek card reader driver
  • Updated HP Notebook System BIOS (AMD processors)

  And Firmware for:

  • The Hitachi hard drive Firmware update

  Here is some information for you to read before hand:

  "To verify that you have an authentic copy of Windows 10 which has not been used on more devices, the license agreement calls for, your 10 Windows must be enabled. Depending on where you purchased your copy of Windows 10, activation occurs using a digital entitlement or a 25-character product key.

  See HP support document Windows 10 Product Activation for more information on activation of Windows 10. »

  Source: installation of Windows 10

  Please read the documentation completely.

  I hope that this has answered your questions and gives you the information that you were looking for. If so, please share it with others by marking the post appropriate as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  Thank you!

  Have a wonderful day!

• Update to Windows 8.1 failed on the Satellite C850

  Good evening

  I tried to update my labtop toshiba 850 c, but the update failed
  Please help me

  I follow the whole teaching as windows update, uninstall realtek wireless and bluetooth toshiba service
  also uninstalled kaspersky

  Please help me

  Have you received the * error 0xC1900101 - 0 x 30018 * during the update of the Win Win 8.1 8?
  In this case, you must check this thread on the same subject:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74891

  Your much appreciated comments

• Satellite Pro C850 - 1 M - update to Win 8.1 fails - error 0xC1900101 - 0 x 30018

  Hi all

  bought a new satellite Pro C850-1MX (PSCBZE 00M009GR) in December 2013. System works virtually unchanged to the State of delivery. Yet installed OpenOffice and Firefox, AdobeReader in most actual versions. And a updated driver for AMD GPUS to the latest version. No other changes made.

  Now I tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  Searched internet solutions: Toshiba ISC
  -updated all the components Toshiba via TOSHIBA Service Station--> fact
  -(Lien: [http://www.toshiba.de/innovation/generic/windows8_1-upgrade-stepbystep/]): uninstall some components: esp. LAN/WLAN-driver.

  Hmmm... If I do I can't access to Windows App-Store to re-run the upgrade because I have no connection to the network. Stupid...

  -Why I'm updating a nearly unchanged system due to some driver-inflicted where I has not changed anything of the delivery status of can´t?

  Please indicate any tip/solution. Thank you!
  Mark

  > Now tried to upgrade to 8.1 via Windows-App-Store Windows. Download was made, run, reboot, installation of changes, preparation of devices--> restart, rollback to 8.0 with 0xC1900101 - 0 x 30018 error code upgrade.

  This error message appears because of some incompatible drivers and tools that are already pre-installed on Windows 8.

  This problem has been reported several times here in the forum and has been resolved as indicated by user harrie_1 on January 12, 2014
  Look in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631

  Check that drivers must be uninstalled in Appendix a.
  [How update of Windows 8 for Windows 8.1 | http://support.toshiba.com/sscontent?contentId=4003162]

  + What is important to remove the internet connection. +
  + Only use to download 8.1 and then disconnect (also the Lan cable) +.
  + After Win start 8.1 for the first time do not connect to the internet. +

  + On another pc download first for 8.1 audio, realtek wlan and bluetooth drivers and driver display. +
  + Install and reboot after that when system is stable, you can connect to the internet and download the updates of windows. +

  PS: this thread should be closed to avoid the misunderstandings and because the other thread already exists