Received the error when compiling my forms

Similar Questions

• has received the error when executed OR .exe to install software OR wihout PC application

  The error received when it .exe application (with references NOR) is run on a PC.

  So I've changed the property NOR references: local copy-> true

  relating to the compilation, always test it, get error if I use another PC without software OR installed.

  After copy / paste all the dll files required in the directory where .exe is located, it works correctly on the machine without MSudio installed.

  I removed the NationalInstruments.NetworkVariable.dll of my project to simply this process.

  then copy all the dll files based on measure XCOPY deployment files Studio .NET

  You don't have to copy/paste the following files (not 3d)

  msvcp80.dll 8
  MSVCR80.dll 8
  Msvcrt.dll 8

  

• Received the error when transferring data from the database file

  Hello...
  
  I have my using SOA 10.1.3.1.0. I am trying to transfer the data from the CSV of the oracle database.
  
  The settings of connection in file xml oc4j DBA adapter file in the path C:\product\10.1.3.1\OracleAS_1\j2ee\oc4j_soa\application-deployments\default\DbAdapter is shown below.
  
  < location connector-factory = name of the connector "ist/DB/DBConnection1" = "Adapter database" >
  < config-property name = "xADataSourceName" value = "jdbc/DBConnection1DataSource" / >
  < config-property name = "dataSourceName" value = "loc/DBConnection1DataSource" / >
  < config-property name = "platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/ >
  < config-property name = "usesNativeSequencing" value = "true" / >
  < config-property name = "sequencePreallocationSize" value = "50" / >
  < config-property name = "defaultNChar" value = "false" / >
  < config-property name = "usesBatchWriting" value = "true" / >
  < connection pooling using 'none' = >
  < / connection pooling >
  < use security-config 'none' = >
  < / security-config >
  < / connector-factory >
  
  
  I get the following error:
  
  < name of part = "summary" >
  < Summary >
  file:/C:/product/10.1.3.1/OracleAS_1/BPEL/domains/default/tmp/.bpel_FileToDb_v1.0_188277739ed1e0b720c1fefd0275d1c0.tmp/FileToAdapterService.WSDL [FileToAdapterService_ptt::insert (FiletodbCollection)] - SISM JCA Execute of operation "insert" has no reason to: could not create/access the TopLink Session.
  This session is used to connect to the data store. Caused by: loc/DBConnection1DataSource not found
  ; nested exception is:
  ORABPEL-11622
  Could not create/access the TopLink Session.
  This session is used to connect to the data store. [Caused by: loc/DBConnection1DataSource not found]
  See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Caused by the Exception TOPLINK-7060 (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.ValidationException
  
  Description of the exception: could not acquire data source loc/DBConnection1DataSource
  
  Inner exception: javax.naming.NameNotFoundException: loc/DBConnection1DataSource not found.
  < / Summary >
  < / part >
  
  
  What is the error in the loc/DBConnection1DataSource line? Guys thank you in advance...
  
  
  Thank you...
  
  Published by: userus007 on January 2, 2010 17:16
  
  Published by: userus007 on January 2, 2010 17:18

  Visit similar thread oc4j - RA.xml and data - sources.xml

• Received the error when installing adobe creative suite 4 web premium

  The plant is shut down during installation to Midway for HP ProBook 6460 b, windows 7 32-bit business. Any update / idea. ? Thank you.

  

  Refer to this:

  Error 1603. Install

  Mylenium

• Error when compiling form 6i

  Hi all
  
  I get the error memory during the compilation of the form.
  I tried with two commands.
  
  I run these commands starting at $AU_TOP/forms/US
  
  Initially, I tried with
  
  f60gen $AU_TOP/forms/US/XXTEST.fmb apps/opopop123 output_file =$XXEEG_TOP/forms/US/XXTEST.fmx
  and I got following error
  
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
  With partitioning, OLAP and Oracle Data Mining options
  Release 9.2.0.8.0 - Production jserver
  PL/SQL Version 8.0.6.3.0 (Production)
  Oracle V6.0.8.21.0 Build #0 - Production procedure generator
  Oracle virtual graphics system Version 6.0.5.39.0 (Production)
  Oracle Multimedia Version 6.0.8.25.0 (Production)
  Oracle tools integration Version 6.0.8.17.0 (Production)
  Common tools Oracle zone Version 6.0.5.32.0
  The basic Oracle 4.0.6.0.0 - Production version
  Compilation of specifications package APP_CUSTOM...
  No compilation errors.
  
  Compilation of the package APP_CUSTOM body...
  Fault memory
  --------------------------------------------------------------------------------------------
  
  Secondly, I tried with
  f60gen Module=/opt/egapmdev/ebmdappl/au/11.5.0/forms/US/XXTEST.fmb Userid = apps/opopop123 Module_Type = batch FORM = yes Output_File = XXTEST.fmx
  Now the error has come was only "for lack of memory" without any other messages.
  
  Please you all a peek inside.

  Do you get the same error when you use the following command?

  module f60gen $ =.

  . FMB userid = APPS / output_file =.FMX module_type = form batch = yes compile_all = special

  Do you get the same error when compiling any other form? If so, please repeat the links adadmin f60gen, make sure that it succeeds and then run the same command again.

• When you install an automatic update. I received the error code 652. try three times. Always code error 652. She strives to update of Miscrosoft Silverlight (KB2164913) need help.

  When you install an automatic update. I received the error code 652. Have tried three times, always the error code 652. She tries to Miscrosoft Silverlight Update. need help

  Hello

  ·        Remember to make changes to the system?

  Follow the steps mentioned below.

  Step 1:

  There may be some third-party software that runs in the background, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  See the article mentioned below.

  Description of the update for Silverlight: September 1, 2010

  http://support.Microsoft.com/kb/2164913

  To get help after your query in the Microsoft Silverlight Forums. Click on the link below.

  http://forums.Silverlight.NET/forums/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed.

  I am running Windows 7. I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed. Also, I lost the ability to transfer MP3s to iTunes and convert them. All of the suggestions. I had a virus attack and had to wipe my hard drive, and then reinstall the programs. ITunes is since that happened. Before I could copy a file from my Olympus digital recorder and make the transfer. Now, I can not drag and click between the windows.

  Thank you

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  Option (2)

  Click on this link:http://www.pcerrorfixtip.com/VistaAudioLib.dll-157425.html

  He helped?

• I receive an error when I try to download the trial version of After Effects an Adope Id I have already

  I receive an error when I try to download the trial version of After Effects an Adope ID I have already

  Download and install the desktop application Adobe Creative cloud and then connect with the Adobe ID and then click the applications tab, and then click the Try button beside Affter Effects:

  Windows version Adobe Creative Cloud Setup:

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Reference:

  Download and install Adobe Creative Cloud apps

• Errors when compiling the package

  Dear members,
  
  IAM after the standard user manual and try to create a few pacakages. When Iam compile the package Iam getting some errors which are as follows:
  
  My Pacakage:_
  
  PACKAGE 'XXARUN_EMP_FETCHER' AS
  FUNCTION XXARUN_GET_EMP(EMP_NO IN NUMBER) RETURN SHEIKYERBOUTI.
  END;
  
  Errors when compiling the above package_
  
  
  Error (2.1): PL/SQL: statement ignored
  Error (2.50): PLS-00201: identifier 'SheikYerbouti' must be declared
  
  
  _ My Package body
  
  PACKAGE BODY 'XXARUN_EMP_FETCHER' AS
  FUNCTION XXARUN_GET_EMP (EMP_NO IN NUMBER) OF RETURN IS
  
  EMP_FOUND EMPLOYEES % ROWTYPE;
  EMP_RTN SHEIKYERBOUTI.
  BEGIN
  SELECT *.
  IN EMP_FOUND
  EMPLOYEES
  WHERE EMPLOYED. EMPLOYEE_ID = EMP_NO;
  EMP_RTN: = SHEIKYERBOUTI
  *(*
  EMP_FOUND. EMPLOYE_ID,
  EMP_FOUND. LAST_NAME,
  EMP_FOUND. JOB_ID,
  EMP_FOUND. MANAGER_ID,
  EMP_FOUND. HIRE_DATE,
  EMP_FOUND. SALARY,
  EMP_FOUND.COMMISSION_PCT,
  EMP_FOUND. DEPARTMENT_ID
  *);*
  
  
  RETURN EMP_RTN;
  
  
  END;
  
  END;
  
  
  Compilation of erros when the Package body above_
  
  Error: PL/SQL: analysis of completed Compilation unit
  Error (1.26): PLS-00905: object HTEST. XXARUN_EMP_FETCHER is not valid
  Error (1.26): PLS-00304: impossible to compile 'XXARUN_EMP_FETCHER' body without its specification
  
  Please help me to solve the above problems.
  
  Thanks in advance.
  
  Best regards
  Arun Reddy.
  
  Published by: A4S on July 20, 2009 10:10

  Hello

  in
  PACKAGE 'XXARUN_EMP_FETCHER' AS
  FUNCTION XXARUN_GET_EMP(EMP_NO IN NUMBER) RETURN SHEIKYERBOUTI.
  END;

  SheikYerbouti must be declared as a type

  Kind regards

  Branislav

• Receive the error without link, download of Civ III with steam.

  Original title: problems to download civ iii with steam

  haven't bought civ 3 steam started to download then received the error no support for windows connection saying steam is not compatible

  Hi Duncanostridge,

  1 Windows operating system you are using?

  2. What is the full error message that you receive?

  3. what version of Civ 3 do you use?

  4. are you facing issues to download the installation for the game files or you use a disk?

  5. If download you the installation files and receive the error, then when you download the files/game of?

  You can check with the technical support of Steam on the issue.

  Steam support

  Troubleshooting connection problems

  Troubleshooting: Specific error Messages

  If you have problems with compatibility, you try to install the game in compatibility mode and check if that helps.

  To run any application in compatibility mode, see the article:

  Make older programs in this version of Windows

• I can't install Service Pak 2 for Windows Vista. I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere. Help!?

  Install Windows Vista Service Pak 2 upgrade

  I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere.

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Receive the error code 646__in installation KB973709, KB972581 KB 974234

  Receive the error code 646

  in the installation of KB973709
  KB972581
  KB974234

  OK... I had the same problem with the download of the 2007 Microsoft security updates. When I tried to install updates, I receive error 646. I finally solved my problem by going to the Download Center on Microsoft and I install manually.

  Here are the steps that I took... which I think should work:

  (1) go to the Microsoft Download Center: http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted under this thread http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2?prof=required&lc=1033 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

• I received calls from someone in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is corrupted

  Original title: my computer is corrupt and needs fixing!

  I received calls from a person in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is damaged, and they want to help me.  But I have not received any error message on my screen.  When I asked them how they got my number they said it's from the database of Windows. The number they gave me is 02921252715 and when I called the number of the person on the other end told me that they are a company called Windows e-solution, independent company and is not attached to Microsoft Windows.  What should I do?  Are these authentic calls and approved by Microsoft Windows?

  Hello

  Its a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">