Reception (specific Inter-org) required Interface table
HelloI have warehouse W1 and W2. I use form Inter-org to send material from W1 to W2 (no, no, sales order, no request and no information of po). We all have the shipment number.
Now, I need to create the backend process to receive the material sent to W2.
Can I use the same tables of Interface Interface PO receipt to process records.
1) values-> rcv_headers_interface
Inserting 2)-> rcv_transactions_interface
(3) run the program "Receiving Transaction processor".
If I can use the above process, how can I avoid PO information. If so, is - anyone can share any example script.
If not, is there a way to make this process of reception.
Thank you and best regards,
Phani
Thanks for the help.
He treats for sure, and I am able to see the records created agaist shipment number. When I try to extract from Froentend then I wasn't able to see. It was happening because of the number of reception not updated to.
Not sure why it is not updated.
I use the following INSERT queries and executes the Program Manager for the backend.
DECLARE
NUMBER OF V_HEADER_ID;
NUMBER OF V_GROUP_ID;
BEGIN
Select RCV_INTERFACE_GROUPS_S.NEXTVAL in the double V_GROUP_ID;
Select RCV_HEADERS_INTERFACE_S.NEXTVAL in the double V_HEADER_ID;
-Receipt delivery
INSERT INTO RCV_HEADERS_INTERFACE
(
HEADER_INTERFACE_ID,
GROUP_ID,
PROCESSING_STATUS_CODE,
RECEIPT_SOURCE_CODE,
TRANSACTION_TYPE,
AUTO_TRANSACT_CODE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
VALIDATION_FLAG,
COMMENTS,
SHIPMENT_NUM,
FROM_ORGANIZATION_ID,
SHIP_TO_ORGANIZATION_ID
)
VALUES
(
V_HEADER_ID, HEADER_INTERFACE_ID,
V_GROUP_ID, GROUP_ID,
'PENDING', PROCESSING_STATUS_CODE,
'INVENTORY', - RECEIPT_SOURCE_CODE,
'NEW', - TRANSACTION_TYPE,
"DELIVER",-AUT_TRANSACT_CODE,
SYSDATE, - LAST_UPDATE_DATE,
-1,-LAST_UPDATE_BY.
SYSDATE, - CREATION_DATE,
-1,-CREATED_BY,.
'Y',-VALIDATION_FLAG.
'Receiver through the Interface cast,' - COMMENTS,
"ROW4", - SHIPMENT_NUM,
102,-FROM_ORGANIZATION_ID.
126 SHIP_TO_ORGANIZATION_ID
);
-Provide inventory
INSERT INTO RCV_TRANSACTIONS_INTERFACE)
INTERFACE_TRANSACTION_ID,
HEADER_INTERFACE_ID,
GROUP_ID,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
QUANTITY,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
RECEIPT_SOURCE_CODE,
DESTINATION_TYPE_CODE,
AUTO_TRANSACT_CODE,
SOURCE_DOCUMENT_CODE,
UNIT_OF_MEASURE,
ITEM_ID,
UOM_CODE,
EMPLOYE_ID,
SHIPMENT_HEADER_ID,
SHIPMENT_LINE_ID,
TO_ORGANIZATION_ID,
SUBINVENTORY,
FROM_ORGANIZATION_ID,
FROM_SUBINVENTORY
)
VALUES
(
RCV_TRANSACTIONS_INTERFACE_S.NEXTVAL,-INTERFACE_TRANSACTION_ID,
V_HEADER_ID, HEADER_INTERFACE_ID,
V_GROUP_ID, GROUP_ID,
'RECEIVE'-TRANSACTION_TYPE.
SYSDATE, - TRANSACTION_DATE,
'PENDING', PROCESSING_STATUS_CODE,
'BATCH', - PROCESSING_MODE_CODE,
'PENDING', TRANSACTION_STATUS_CODE,
90,-QUANTITY.
SYSDATE, - LAST_UPDATE_DATE,
-1,-LAST_UPDATE_BY.
SYSDATE, - CREATION_DATE,
-1,-CREATED_BY,.
'INVENTORY', - RECEIPT_SOURCE_CODE,
'INVENTORY', - DESTINATION_TYPE_CODE,
"DELIVER",-AUT_TRANSACT_CODE,
'INVENTORY', - SOURCE_DOCUMENT_CODE,
"EACH",-UNIT_OF_MEASURE,
122,-ITEM_ID,.
"EA", - UOM_CODE,
NULL, - 25, - EMPLOYEE_ID,.
3160726,-SHIPMENT_HEADER_ID,
4894146,-SHIPMENT_LINE_ID,
126,-TO_ORGANIZATION_ID.
"TXFR", - SUBINVENTORY_ID,
102,-FROM_ORGANIZATION_ID.
"SALEABLE" - FROM_SUBINVENTORY
);
COMMIT;
END;
-These are the records inserted in the Interface table.
declare
l_return_status VARCHAR2 (1);
l_msg_cnt NUMBER;
l_msg_data VARCHAR2 (2000);
number of l_trans_count;
number of l_return;
BEGIN
fnd_global.apps_initialize (3689, 20634, 401);
dbms_output.put_line ('Started');
l_return: = Fnd_Request.submit_request (app-online 'IN.',
program-online "RVCTP."
Description-online "Receive Transaction processor",
start_time => SYSDATE,
sub_request => FALSE,
argument1-online "BATCH."
argument2-online 826796);
commit;
IF (l_return = 0)
THEN
dbms_output.put_line ('Scussfull');
ON THE OTHER
dbms_output.put_line (l_msg_data);
END IF;
END;
This treats the records in the interface table and I do not see that it will create records in the Base table. I found that the Receipt_num is NULL.
Select * from rcv_shipment_headers where shipment_num = 'ROW4. "
I manually updated and tried to pick up once again, and I am able to see Froent-end. Is that what I'm missing all the values in the table of Interface?
A point Important notice is:
Select * from RCV_HEADERS_INTERFACE; -Process_status_code is running.
I need to run anything else?
Thank you and best regards,
Phani
Tags: Oracle Applications
Similar Questions
-
Interface tables bank statement Import
Hi all
I use OEBS R 12.1.3. CAN anybody tell me / some links or info / on the bank statement Import program interface tables use as I can't find or I am just a bad researcher...? I need to insert data there in order for this program to create bank statements.
Thanks in advance,
Bahchevanov.See http://docs.oracle.com/cd/A60725_05/html/comnls/us/ce/intert01.htm
and how to create new template mapping instruction requirement Bank, latest Patch [563476.1 ID]Sandeep Gandhi
-
Fixation by interface table (OE_HEADERS_IFACE_ALL)
Dear Sir
I do customization in the order management Module
currently I am loading data via the interface tables IE
OE_HEADERS_IFACE_ALL
OE_LINES_IFACE_ALL
now, a new requirement is generated by management to make the attachment in the custom application. The user will write long text in the text field and after the interface table has been processed through the ORDER IMPORT demand. text will be saved in the attachment table IE
fnd_documents_short_text
fnd_documents_tl
fnd_documents
fnd_attached_documents
Guide kindly,
ConcerningSandeep Gandhi
-
Refresh the components within a specific line of an af:table programmatically
How do I refresh the components within a specific line of an af:table programmatically without refreshing the entire table? _
I have an af:table to display a view read-only object. There is a button change in the table by calling an af:popup, where the user can update the information and click on a submit button to commit its changes.
The action of this button property is a method in a holder in the summer where
-1: a stored procedure is called to update several tables (related to my read-only VO).
-2: the VO is re-interviewed (refreshQueryKeepingCurrentRow() VO.)
-3: updating of the whole table (AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable))
Is it possible to programmatically refresh some components of the current row in the table without refreshing the entire table (point 3)?
I tried to play with the property "partialTrigger" to af: outputText (table: column: outputText), without success.
Thank you
NicolasOK, that's a very clear answer, thank you.
Now, first do a little optimization:
if(!StringUtils.isStringEmpty(results) && results.equals("TRUE")) // should be if ("TRUE".equals(results)) // since it's faster, simpler and requires one less dependency
For your use case, you can say you want to always refresh the line, then you could link the table in your backing bean, retrieve the selectedRowKeys and then set the key for the current line on the model in the collection before adding the partial target. So, something like:
Set
p.s. I checked the table rendering code to be sure and partial updating of the contents of the line must be possible without refreshing the entire table.
Kind regards
~ Simon
-
What is the difference between transfer Inter-org &; ISO
Can someone please share the difference between transfer Inter-org & ISO?
by legal example include, accounting entries, traceability, demanding load of entity/organization...
Also please help me to understand when are we going to use that option, and where we cannot use which option...
e.g. transfer Inter-org cannot be used when required in some material THE different (legal person).Hello
Internal requisition is used to replenish the inventory equipment
Organization to your organization of inventory.(1) internal sales a sales document (i.e. the invoice, pro forma) where as
inter org transfer is just the transfer between the orgs inventory.(2) approval process is possible in the ISO, but it is not possible in the Inter-Org
transfer.However, you can view more information in the links below
Link: [http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/inv/iorgcon.htm]
http://applearn.blogspot.com/2007/11/setup-steps-required-to-use-internal.html
http://www.oracleappshub.com/OM/understanding-data-flow-for-internal-orders/
http://download.Oracle.com/docs/CD/A60725_05/HTML/comnls/us/Po/ireqov03.htm
Thank you
RaluPublished by: Raghav Velichetti November 4, 2009 14:53
-
Transfer inter-org vs IRISO flow in the same OU
Hello
Can someone tell me why we use internal requisition & order flow of internal sale of transfer of material between the organizations, even though we have an option of inter-org inventory transfer which is very simple then IR / ISO. Please clearify.
Thank you
Kind regards
Rashita George
Hi Rashita,
You are right, that the process that is transfer Inter-Org and IRISO process are used to transfer one org to another material and transfer Inter-Org is a simple approach to perform this operation.
But the main reason why processes IRISO is preferred to the Inter-Org approach is that IRISO is a controlled process with good show of demand for the destination org (the org to which the items will be transferred) in the request form internal, which would then be converted into internal sales (ISO) order and the order would be imported by the source org (the org that will transfer the elements according to the demand of destination org).
In this way, the system will make sure that everything is under control and the process that allows you to keep a track in the course of this process at any point in time. And more important still this can be done automatically through methods such as Min - Max or Kanban planning with the planning inventory source enter respectively the inventory or Inter-Org.
While the transfer of Inter-Org is not a controlled process. It simply transfers the material of one org to another without any reference documents in the system.
Concerning
Shabbir
-
Loads separate lines into PO_LINES through the interface tables
Hi gurus
I need to load a standard PO via the interface. In interface tables there are several lines using a single ITEM_ID, changing only ITEM_DESCRIPTION.
This ITEM_ID is a service, each line represents a detail of this service.
After the import process, in PO_LINES, there is a single line with amount total.
How can I do to load separate lines in PO_LINES?
Thanks in advance
OscarHi Oscar,.
Unfortunately, there is no way to do it using PDOI... Try to use the private api po_interface_s.create_document. But the problem is that you might not be able to use it as a... have to copy this API and modify as needed.
Kind regards
Praveen -
How to get information from web interface tables
Hello
How to get information from web interface tables
as in the forms... Go to help-> Diagnostics-> review
Block = SYSTEM field is LAST_QUERY.
Kind regards.Salvation;
Please see the paragraphs below:
How to determine the Table and the name of the column to a field in a form in 11i [ID 259722.1]
How to find the query that succeeded recently? [241628.1 ID]Respect of
HELIOS -
The AR invoice line number does not Interface table
Hello
I have a Bill to convert with 5 lines, but the line numbers are 2, 3, 4, 5, 7. I pass the staging table line number to ra_interface_lines.line_number and I can see the data in the interface table I in the staging table. But when the car invoice is executed and the invoice lines have serialized numbers line 1,2,3,4,5. Can someone let me know why this is happening?
Thank you.I don't think that you can control the target (desired) line numbers, you can control how lines are classified by mentioning a rule-based command line
some columns, associate the collection and then rule command line batch source.
Your condition must wear the same # s to AR and I see gaps in the sequence numbers (line), I don't think it's possible.
See the description of column auto invoice. If the idea is to link to the desired line number, pass the number of line in a column of attributes and open a FDF so that you know
What that line the old system it maps too. After creation of invoice, you can update by running a sql however not recommended by oracle if it is necessary you
can do this as a last resort.LINE_NUMBER
This column is used by AutoInvoice and should be left to zero. AutoInvoice know nothing
values in this column and still the lines sequentially from numbers
rule number 1, in the order determined by the command line. -
Difference between domestic and Inter-Org transfers?
Hi all
1.i want to know feel it between the Inter-Org transfers and internal order?
2. when we use these two?
Thanks in advance...
KKPlease refer to the below thread for the same information
What is the difference between Inter-org transfer & ISO
Thank you
Ralu -
Allow specific access through the Interfaces ASA 5510
Hi all
In my quest to learn Cisco IOS and devices, I need help in smoothing traffic, or access lists, allowing traffic between internal interfaces on the SAA specifically.
I have an ASA 5510:
WAN/LAN/DMZ ports labled E0/0 (LAN), E0/1 (WAN), E0/2 (DMZ).
Connected to the port E0/0 is a 2811 router
Connected to the port E0/1 is the (external) Internet
Connected to the port E0/2 is a 2821
(I'll add a 3745 for VOIP) port E0/3, but it has not yet happened.
I want to allow traffic between the 2821 and the 2811 routers so that devices on the networks behind them can talk to each other.
I've specified specific subnets between the ASA and the routers because I want to learn how to shape traffic behind routers, as well as on the ASA. So behind the routers I have different VLANS, but I'm not restrict access between them, still, at least I don't think I am. But as it is, behind the 2821 devices cannot access the DNS / DOMAIN SERVER that is located behind the 2811. Right now I have the routers DHCP power, who works there. Currently devices behind the router 2821-3560 switch cannot access the domain server, primary dns server.
How can I set the ASA to allow traffic to flow between the two routers and their VLANS?
Here's the configs of each device and I have also included my switch configs, incase something should be set on them. I only removed the passwords and the parts of the external IP address. I appreciate the help in which States to create and on which devices.
I think it is best that I put the links to the files of text here.
Thank you!
You must remove the following statements on the two routers:
-# ip nat inside source... overload
-for each # ip nat inside/outside interface, if they have configured.Remove ads rip of the networks that are not directly connected:
-2821: 172.16.0.0, 192.168.1.0, 199.195.xxx.0
-2811: 199.195.xxx.0
-ASA: 128.0.0.0No way should be added to the routers, since he is the one by default, put in scene to ASA.
Check the tables of routing on routers and the ASA.
On ASA:
-Remove:
object-group network # PAT - SOURCE
# nat (indoor, outdoor) automatic interface after PAT-SOURCE dynamic source-create objects of the networks behind the LAN router and enable dynamic NAT:
network object #.
subnet
NAT (inside, outside) dynamic interface-review remains NAT rules.
-to set/adjust the lists access penetration on the interfaces. Do not forget to allow the rip on the LAN and DMZ interfaces.
-Disable rip on the outside interface.
-
Unable to load is the owner of standard Interface table at the Base of the OM tables
Hi gurus,
I load the data of shims for orders using the standard interface for order management.
I can see the data blocks in the table of standard interface
Select * from apps.oe_actions_iface_all;
gives me data from the pending requests that need to be attracted to the flat-rate import program.
but when I run the import of order program,
I get the following error
Order import concurrent program
Simultaneous program settings
Post only: N
Control the Source: 1064
Order code:
Sold to Org Id:
Sold to Org:
Change the sequence:
Performance parameter: Y
Cut the whites: N
Operation:
Number of Instances: 0
Debug level: 0
Request Id: 105961365
Org Id: 166
Cannot perform Action ask APPLY_HOLD
N ° of orders found: 1
N ° of orders imported: 1
N ° of the commands failed: 0
Message from the source/line/command/Seq
1064/12715682 / / 100, you are not allowed to apply this expectation.
End of the simultaneous programme of the Import command
Can someone help me on why it will fail in the import order program, which would be the cause of the simultaneous program error.
all input is much appreciated.
Thanks adavance
Published by: 909577 on August 24, 2012 12:01 AMHello
I have no English version (I don't want to open a session we language I'm lazy :)) This is my translation :) Order management responsibility-> Setup-> controls-> shims find you hold and look at authorization. Maybe your wrong because that pck.
Kind regards
Luko -
Required interface for Modbus ASCII or RTU and Labview?
What hardware is required to interface a Modus ASCII or RTU unit to the PC that has Labview drivers?
Thank you.
Hi dbaechtel,
Modbus works through each series or Ethernet, depending on the device you are using. The only equipment you need next to the device you are trying to contact is a card series or Ethernet card, which are not in most computers. In addition, you probably do need cables.
-
help required on table transpose
DATA IN THE TABLE:
ST IC OC
I have 18 2
20 4 K
10 1 L
where ST, IC and OC are names of columns and I want data from the table format below. Please help,
I K L
IC 18 20 10
OC 2 4 1
Hello
Visit these pages to learn how to rotate the data:
http://forums.Oracle.com/forums/thread.jspa?MessageID=4347279
http://forums.Oracle.com/forums/thread.jspa?MessageID=3662005
If you don't know not set an upper limit for the number of columns in the result, swing requires dynamic SQL and I recommend you rather use String aggregation , where the output is a column of the great string, format to watch as separate columns.
If you get stuck, post your best attempt, as well as some examples of data (CREATE TABLE and only relevant columns, INSERT statements) and the desired results from these data.
Always say what version of Oracle you are using (for example, 11.2.0.2.0).
See the forum FAQ https://forums.oracle.com/message/9362002#9362002
-
How to add new resource to existing routes using the API / Interface Tables?
Hi friends,
I need to add new resources to our existing ranges. The number of records is more than 10,000. So I need to create an anonymous block for her. But I don't know what are the tables Interface / API to use for their insertion. If anyone can guide me how can this be achieved, I would really appreciate it. If you can provide me with an example of code for it, it would be the best.
Thanks in advance.
KMHi KM.
PL insert the line in the BOM_OP_RESOURCES_INTERFACE table with
INSERT INTO BOM_OP_RESOURCES_INTERFACE
(process_flag, transaction_type, organization_id, routing_sequence_id, operation_seq_num, resource_seq_num,
resource_code, assigned_units, usage_rate_or_amount, basis_type, schedule_flag, creation_date, effectivity_date)
VALUES
(1, 'CREATE', organization_id, v_rout_seq_id, v_operation_seq_num, v_resource_seq_num, v_resource_code,
v_assigned_units, v_usage_rate_or_amount, DECODE (v_basis_type, 'BATCH', 2, 'ITEM', 1),
Decode(i.schedule_yes_no, 'YES', 1, 'NO', 2), sysdate, v_eff_dt);Where, v_eff_dt = SELECT operation_sequence_id, effectivity_date IN v_oper_seq_id, v_eff_dt
OF bom_operation_sequences b
WHERE b.routing_sequence_id = v_rout_seq_id
AND b.operation_seq_num = v_operation_seq_num;Then run simultaneous 'Bill and routing Interface' to import resources into the existing ranges.
HTH
Sanjay
Maybe you are looking for
-
A DVD player is available for iMac OSX el Capitan?
There is no dvd player with my computer; It is available a the sale please?
-
How can I uninstall and reinstall HP Support Assistant?
I don't know if this software is installed in my computer. There is a message telling me that there is a problem with HP Support Assistant, but when I click it says something like that is not available (the message or I don't know what /). In addit
-
Control Alt/directional keys did not help. What can I do next? Please email me with suggestions. E-mail address is removed from the privacy *.
-
Continuous flow of text to next text field
I am trying to auto complete the text in the text field based on the selection of some 30 boxes in option. Needless to say that the combination exceeds the capacity of the text of a page field. How can I have it flow into a new text field (T40) if T3
-
And what I'm trying to accomplish is the following, I'm doing a 3D image of an image I already have?