Required interface for Modbus ASCII or RTU and Labview?

Similar Questions

• help with a simple user interface for video flv with benchmarks AND buttons

  Hi all

  OK, I built a very simple FlashDrive using the componet video and I used in the flv file cue points, then I used simple buttons and findcuepoints code snipets for make my buttons go to a certain part of the movie.

  Everything works very well.

  Now what I do is when a certain amount of point play button stay an overstate and once made part of the video or another button is clicked on the first North of the State and the new part back button or the new button have the overstate.

  I think it will be an easy task, I'm not sure how to in this regard.

  Any help greatly appricaited.

  code below

  start_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
  
  function fl_ClickToSeekToCuePoint(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch1");
      vid.seek(cuePointInstance.time);
  }
  
  
  ch2_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_1);
  
  function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch2");
      vid.seek(cuePointInstance.time);
  
  }
  
  ch3_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_2);
  
  function fl_ClickToSeekToCuePoint_2(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch3");
      vid.seek(cuePointInstance.time);
  }
  
  ch4_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_3);
  
  function fl_ClickToSeekToCuePoint_3(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch4");
      vid.seek(cuePointInstance.time);
  }
  
  ch5_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_4);
  
  function fl_ClickToSeekToCuePoint_4(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch5");
      vid.seek(cuePointInstance.time);
  }
  
  ch6_btn.addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint_5);
  
  function fl_ClickToSeekToCuePoint_5(event:MouseEvent):void
  {
      var cuePointInstance:Object = vid.findCuePoint("ch6");
      vid.seek(cuePointInstance.time);
  }
  

  I try to help, but you will need to apply your neurons to make it work with what I have already explained (three times with what I propose below).  Try something like the following (I'm rename your buttons for ch1, ch2, ch3, ch4, ch5 and ch6 so that the same functions can be shared by all the buttons...)

  This affects the listeners to all 6 buttons

  for (var i: uint = 1; i<7;>

  This ["ch" + String (i)] .addEventListener (MouseEvent.CLICK, fl_ClickToSeekToCuePoint);

  }

  It deals with one of the 6 inclinometer when they are clicked

  function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void

  {

  BTN var = event.currentTarget;

  var cuePointInstance:Object = vid.findCuePoint (btn.name);

  VID. Seek (cuePointInstance.Time);

  resetButtons();    What makes all the buttons back to normal

  btn.upState = btn.overState; What makes the States of change of the button clicked

  }

  function resetButtons (): void {}

  for (var i: uint = 1; i<7;>

  This ["ch" + String (i)] .upState = this ["ch" + String (i)] .hitTestState;

  }

  }

  To do this, your buttons need to have the same work as part of hit as they do under the top.

• Open interface for lists of approved suppliers and sourcing rules

  Hi all
  
  Is there an open interface or an API of accepted lists suppliers and sourcing rules.
  
  Thank you and best regards,
  
  MPH

  You can use the API, even if you do not use MFG.

  You must set up the sourcing
  You must enter the Organization of shipment if the SR gets other org inventory material. otherwise, you will need to enter the details of the seller.
  I think you can leave the receipt org id field.

  Hope this helps,
  Sandeep Gandhi

• M530DLL.dll missing for Newport power meter 2935 and LabView

  I installed all the software and drivers with the Newport 2935 and when I try to run the included VI, I find that the file M530DLL.dll is missing.

  You even go to the web site of Newport? I just did a quick search it and found this.

• How to sit interface with matlab 2010A and labview 2010

  I use tools of simulation interface 5.0 with matlab 2010A and labview 2010, I want to take my cue from matlab, labview but signal transfer, I am facing a problem. I want to know is there any compatibility issue in sit 5.0 or I do something wrong?
  photos of errors are attached.

  natasftw wrote:

  http://digital.NI.com/public.nsf/allkb/02F5FA55FC28BDE1862578A30071F975
  While it is for 2011, I doubt that they decided to remove 64-bit compatibility as they went forward as 64-bit has become more rather than less demand.  In this document,notes LabVIEW Simulation Interface Toolkit does not support 64 bit versions of MATLAB application software."

  The extent of the compatiblitly for 32 - bit, I'd take a peek at: http://digital.ni.com/public.nsf/allkb/D174674A91E5536286257428005C2426

  The OP's question was SIT support 64 - bit version of LabVIEW and 64-bit version of the MATLAB/Simulink itself, not the operating system software.

  Document in your second link is on a completely different topic to have API for LabVIEW and MATLAB/Simulink/RTW (well, mostly Simulink & RTW). Here is the relevant link for the 32-bit compatibility: http://digital.ni.com/public.nsf/allkb/049295038FF0EE2A86257A06006B2DAD is no SIT 64-bit.

  Other underlying issues is that Pharlap does not have a 64-bit version. Finally, simulations are better performed on some RTOS (embedded PXI) for a deterministic execution rather than PC operating systems.

  -BTC

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I forgot my password for one of my computers and when I try to reset it... He told me that this feature requires removable media, such as a floppy disk

  Original title: how to change the password

  I forgot my password for one of my computers, and when I try to reset it... He told me that this feature requires a removable media like a floppy... I have no disk... How to reset password

  Hello

  1. How are you trying to reset the password?
  2. what operating system do you use?
  3. do you have the computer connected to the network or domain?

  If you are referring to the windows password then, refer the below article.
  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Reference:

  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• locking the computer: if not using computer for a while, it locks and requires the initial password to get in

  So do not use computer for a while, it locks and requires the initial password to get back in. When it becomes available, we've been thrown off internet, or another program we are.

  I don't know why Mr. Murphy suggested a system restore. Maybe he interpreted your post differently I did. You have your screen standby/power options defined on too short a time. You can also disable the requirement for a password during the recovery.

  Right-click on an empty area of the desktop and click on personalize. To customize the applet opens. Click the screen saver. Change the timeout to something reasonable like 10 or 20 minutes. You will see where you can clear the check box next to the "password required on curriculum vitae... ».

  Now do the same in the (Control Panel) Power Options applet. This link contains pictures showing you how to disable this option:

  http://www.mydigitallife.info/2008/06/29/disable-Windows-XP-and-Vista-from-asking-for-password-to-unlock-on-wake-up-resume-from-sleepstandby/

  MS - MVP - Elephant Boy computers - don't panic!

• User interface for the touch and trackball design

  Hello everyone

  Design the user interface for my ap, and I have a question.

  My access point has a lot of button image.

  I can imagine the ImageButton for touch screen and trackball.

  I have known that using touchevent for touchscreen and trackwheelClick for the trackball.

  When I use both in an application, the access point is not make sence to use,

  If this is not the case, can I know the user device or not doesn't have trackball or both.

  My code:

  final BitmapField bf_Projection = new BitmapField (B_Projection, Field.FOCUSABLE) {}
  {} public void onFocus (int direction)
  this.setBitmap (B_Projection_Down);
  }
  public void onUnfocus() {}
  this.setBitmap (B_Projection);
  }
  {public boolean trackwheelClick (int status, int time)
  UiApplication.getUiApplication () .pushScreen (p_Screen);
  this.setBitmap (B_Projection);
  Returns true;
  }

  protected boolean touchEvent (TouchEvent message) {}
  int x = message.getX (1);
  int y = message.getY (1);
  Make sure that the point is in this area
  If (x < 0="" ||="" y=""> < 0="" ||="" x=""> getExtent () .width: y > getExtent () .height) {}
  Return super.touchEvent (message);
  }
  {Switch (message.getEvent ())}
  case TouchEvent.DOWN:
  this.setBitmap (B_Projection_Down);
  break;
  case TouchEvent.UP:
  this.setBitmap (B_Projection);
  break;
  case TouchEvent.CLICK:
  case TouchEvent.UNCLICK:
  UiApplication.getUiApplication () .pushScreen (p_Screen);
  this.setBitmap (B_Projection);
  break;
  }
  Return super.touchEvent (message);
  }
  };

  Clintliu wrote:

  case TouchEvent.CLICK:
  case TouchEvent.UNCLICK:
  UiApplication.getUiApplication () .pushScreen (p_Screen);
  this.setBitmap (B_Projection);
  break;

  These two make no sense at all - either treat CLICK or UNCLICK because otherwise you will push the screen twice.

  That being said - the best way is to ignore the fact touchEvent() exists and replace just the click of navigation and/or uncheck.  They will work correctly for navigation in trackpad and touchscreen / click.

  One of the problems with the touchscreen is that if you click on a non-focus field or in empty space currently target field will get the event.  You can override the entire event (return super.touchEvent () in any case) DOWN carefully to detect this situation.

• VG202 and the VG204 requires licenses for CME?

  Hello

  VG202 and the VG204 requires licenses for CME?

  Reference number?

  Thank you

  Hello

  You men user license, the registration as EPSC ports? If so, let's say that Yes.

  When one of the FXS ports as SCCP that you use an instance of user, or one of the available ephone register, so if you're wondering if adding to the CMF as SCCP FXS ports, Yes, it will decrese the amount of phones that you have available to the general public.

  On the other hand, if you use the VG20X with h.323 or SIP to the CMF it will not use the ephone instances, so you shouldn't worry about this.

  --
  Jorge Armijo

  Do not forget to rate helpful responses and identify useful or correct answers.

• 'Require SSL for client connections and Administrator display.

  Whence him 'require SSL for client connections and Administrator display' option under Display Configuration > global settings go into View 5.1? I don't see this because I do not have the right license or move it elsewhere?

  According to the documentation of view 5.0 (http://pubs.vmware.com/view-50/index.jsp?topic=/com.vmware.view.installation.doc/GUID-5706AA18-795A-4575-96EF-98CA3E19228C.html), the option should always be there.

  Thank you!

  In the login server access configuration display: > servers > server connection > edit one of the servers, and you should see the optoins

• How can I disable hierarchical keywording in LR 5?  The preference of the interface for the AutoComplete is turned off and I still get California &gt; United States &gt; country.  I want to just Caliofrnia.

  How can I disable hierarchical keywords in Lightroom?  The preference of the Interface for full Auto is already disabled, but I still get California > United States > North America when all I need is the California.

  You must be signed in order to respond to messages.

  One of the reasons why you can see the hierarchical format for the key words are you have the word 'California' duplicate key in your keyword list.

  Lightroom display these files directly with.< parent-keywords"="" appended="" to="" the="">

  IE California< state="">< country ="" and="" california="">< united="">

  If you re - keyword photos so that they use only one version and then delete it key word duplicate of your keyword list and then she displays just "California".

  Bruce

• Why is there no user interface for moving the cache locations/profile?

  OK, so it took me a long time to find how to move the location of the cache and the reason is that it is done by an entry that does not exist originally, so a user need to know the channel config even magically set it.
  (this is browser.cache.disk.parent_directory for those in the same waters as me) and it still did not move the location of the profile...
  To change your profile location? The doc only that talks on this subject here:
  http://KB.mozillazine.org/Moving_your_profile_folder
  and it does not work so well for me (i.e. all) but why have I not copy and change things? It is created automatically the first time you start so FF cannot use the same method to create a new profile in an empty space?

  And my real question: is there a valid reason, that there is no element of the user interface to set the location of the profile cache directories?

  There never was a user interface for these parameters - Mozilla is "stingy" about adding prefs that will be only once required by the installation of the user interface. Also, I assume that the developers are convinced that a power user who thinks that even on the displacement of the cache will be searching for instructions on how to do it. (BTW, when you move the cache profile is moved to the folder path profile, its origin "local settings" folder - thus it is automatically moved out of APP DATA.) You can still use this pref to put the cache exactly where you want. I use a small partition for the TEMPORARY files and the cache of Firefox, so they don't one of my biggest readers logics frag.)

  Regarding the difficulties with a profile in motion, developers have threatened to remove Firefox profiles altogether for the last 3 years or 4 and WONTFIX had no Bug filed all improve or add new features to the Profile Manager. This will probably happen this year some time.

  Between you and me, there is a new Profile Manager application just went Beta, which will probably "be released" just as the existing profile manager is extracted from Firefox. It is very schweet and is always at the point where the developers are in response to reports of bugs on features to include and adding the items that are important. I have tabled a minor Bug on the characters allowed in a profile name, which was fixed in 3 or 4 weeks.
  
  https://developer.Mozilla.org/en/Profile_Manager
  
  https://wiki.Mozilla.org/Auto-Tools/projects/ProfileManager
  
  http://FTP.Mozilla.org/pub/mozilla.org/utilities/ProfileManager/1.0_beta1/
  
  You must have Windows Visual C++ 2010 redistributable installed for the application of the Profile Manager XUL Runner to work right now. I hope that this will change very soon, and all the necessary files will be included in the Zip package.

• USB &amp; Firewire audio interface ports still work as input and output?

  I guess everyone has to start somewhere, even if it is borne by almost everyone I would like to know the answer to my questions, perhaps with good reason, what I don't know is so if the USB ports unique connection and firewire on an audio interface function ALWAYS both as input AND output.  In other words, whenever I read the information about the product on audio interfaces, no matter where I go, it is generally accepted that most people buy their audio interface for RECORDING.  And so when most people talk about connecting their Apple computer, iMac or MacBook Pro, it is generally accepted, they turn to the USB as INPUT.  That's all very well and good.  But in my case, I want to use the USB port as output (not the taken mini) and go into an audio interface that gives me as a symmetric output signal that I can plug my amplified studio monitor (which has only a balanced XLR input). All of the examples I see with audio interfaces address registration and involve the use of the USB on the audio input interface.

  So my question is: can one USB port I see on any number of audio interfaces always function both of the inputs and outputs? It takes, but if so, why does any site mention this fact and whey didn't they show in all the diagrams of the audio interface manual hook to studio monitors?  I know what may be obvious to some, but as a user with the intention not to use a piano for a scene while but rather a keyboard/MIDI controller that is attached to the iMac to be able to use the virtual instrument software, I need to go to the controller to the iMac, then the iMac in symmetrical powered monitors. Do the balanced inputs of speakers requires more than a simple adapter to give the President a balanced input.  But nobody talks about audio interfaces usually unless they talk about as a way into the computer to record.  As for my situation? Why don't they include this example?  And why should they assume that novice will automatically KNOW that the usb port, an audio interface will work as an output as if they never EVER mention this example or Setup?  I guess it is to operate in both directions!  But really, I'm crazy to wonder when no one never speaks or shows this configuration? He suggested I buy something similar to a UR22MkII of Steinberg, who has a USB port. Even the Steinberg site speaks only records and so using the USB key as input for use with the recording software. There is no mention of its use out the mac in balanced speaker entries, even in the manual. In fact, it is question is always true for every audio interface manual that I watched, even by other manufacturers! Why they all assume a novice like me (whose money is just as good as money from the experienced user) KNOW that? It's frustrating!

  I know that this is not strictly a matter of logic, but I guess, in my view correctly, that a logic user community could be more appropriate to address my question for others communities. If I'm wrong, please help to re-send-the matter.  Thank you.

  Sound the interface itself that determines it can send and receive Audio or Midi... not the USB or FW port which both are devices of e/s...

  All USB and Midi peripheral FW are inputs and outputs

  All the USB and Audio FW are inputs and outputs...

  All devices USB or external hardware with a USB port... can handle Midi and Audio...  Some do... Most manipulate just Midi... or just Audio

  The Steinberg UR22MkII manages Audio and Midi...

  However, I do not recommend USB 2.0 audio devices... There are simply too many cases, problems and questions after the major updates for OS X with such devices especially when they are class compliant (IE without driver), even if the UR22MkII Steinberg is supposed to be compatible 10.11...

  View the other may vary... because it's just a personal opinion based on my past experiences both in my studio... and based on the many issues presented here and elsewhere.

  I'm sticking with Motu equipment for all my Audio devices... and I use iConnect devices for my Midi needs...