Record and Types of Table definition

Similar Questions

• Urgent - how to separate incorrect load records and put it in a separate table

  We won't be a requirement in ODI 11 g of the customer each time a wrong record execution flow shud is met rather separate shud of those records in a table of errors as well as at the end of the charge of the management of errors we shud be left with all the documents (with the exception of incorrect records) in the target table and these records incorrect shud be there in a separate table of error.
  The definition of the incorrect records may include the size of a column or data type incompatible between the source table and target. How to implement this strategy in ODI of error handling, or is it one out of the box solution that we can leverage it please help.
  
  Thank you and best regards,
  SBV
  
  Published by: user13133733 on December 23, 2011 04:45

  Hi, SBV,.

  Please find my answers below,

  I tried the steps suggested, however I have some doubts:
  1. what all data exceptions (for example, violation of constraint primary key etc.) are dealt with in this mechanism?

  Yes, you can manage PK, FK, check violations of constraints etc. with CKM.

  2. If there is a difference in size between the source and target table column it will work? (I know because I tried it and it will give error before completing the I$ table, because I$ is created according to the source).

  You're right column size incompatibilities will not be captured under the property default CKM.

  Also, I get an error in the creation of the SNP_CHECK_TAB step. In my case, ODI's by default making a query like "create table. SNP_CHECK_TAB", now this period (.) before SNP_CHECK_TAB is what makes an invalid table name and that is why this step is a warning (not an error), but to the next step (delete previous checksum) is to launch a mistake because this step is also looking at. Table SNP_CHECK_TAB who's not here.

  Please help me here the whole issue. I don't know why he does this default query I freshly impoted the CKM Oracle and used.

  It's coz there is no physical schema by DEFAULT not defined on your target data server.

  Open Manager, topology-> Phy architecture-> -> -> develop, open your physical schema and check DEAFULT.

  Thank you
  Guru

• What is the difference between the type of table and view?

  Hello world.

  What is the difference between the type of view and table that we can set using SQL statement such as: "tab type is table of...» » ?

  A view is a stored query.

  An array type is a construction of PL/SQL.

  Both are documented:

  http://docs.Oracle.com/CD/E11882_01/server.112/e10897/schema.htm#ADMQS0841

  Management of schema objects

• Records and course appearing is not in the oil base tables

  Hello

  I came across a folder where the courses and its sub folders do not appear in the folder and content_object database tables. I can see this folder, courses and records it in the tab content of oil demand. I was under the assumption that all records are ongoing in the database table content_object and file database table. My assumption is incorrect? Can someone help me understand this situation?

  Thank you

  South

  FOLDER is a view of database security. Then, of course, you can ' t display all rows in the table.

• LTRIM in an external Table definition.

  Hello
  
  We use the Oracle 11.2.
  
  Because there is little documentation on the Web on no general external Table definitions, I would like to put this question out there.
  
  How can I insert a Ltrim function in an external table definition?

  Hello

  Here is an example that works on my system:

  CREATE TABLE     table_x
  (       num_id          NUMBER (2)
  ,     string_id     VARCHAR2 (2)
  ,     txt          VARCHAR2 (12)
  )
  ORGANIZATION EXTERNAL
  (     TYPE               oracle_loader
       DEFAULT DIRECTORY     my_dir
       ACCESS PARAMETERS (
                      RECORDS DELIMITED BY NEWLINE
                      FIELDS  (     num_id          CHAR (1)
                           ,     string_id     CHAR (2)
                           ,     txt          CHAR (12)     LTRIM
                           )
                          )
       LOCATION       ('table_x.txt')
  );
  

  Where the data file looks like this:

  1 A    abcdefgh
  1 A    ijklmnop
  1 A     pqrstuv
  1 B    abcdefgh
  1 B      ijklmn
  2 A    abcdefgh
  3 C          hi
  3 C       world
  

  With this example data, the LENGTH (string_id) is always 2 (in other words, each string_id begins with a space), but LENGTH (txt) varies from 2 to 8.

  I hope that answers your question.
  If not, post your CREATE TABLE statement (simplified as much as possible, but always with the same problem) and a few lines of the data file corresponding.

• Maximum RAM and type for Satellite Pro A100

  Hello.

  I have already looked at my manual, but I can't get a definitive answer.

  I went to one of these computers, analysis of Web sites and it claims I have 2 SLOTS where I can put 1 GB DDR II PC2-4200 each (so 2048 MB of ram)
  (es http://www.crucial.com/store/listparts.aspx?model=Satellite%20Pro%20A100%20Seri) But according to CPU - Z, my laptop contains DDR II PC2-4300 512 MB

  But when I recorded from TOSHIBA Web site and entered the serial number of my cell phone, he told me that I had a Satellite Pro A100-196
  When I searched for Satellite Pro A100-196 on the internet, I came across a website (http://toshiba.icecat.biz/en/p/PSAACE-00E00DG3/Satellite%2520Pro%2520A100-196.htm) that says that 100-196 a module of DDR II (533 mhz) and that it can place additional modules up to 4096 MB (which means I can't that modules of RAM 2 GB each)

  So I would like to know if anyone knows the final RAM MAX (and type), I can place.

  Thank you.

  The Satellite Pro A100-196 appears to bear the 667 Mhz front bus!
  So, you can also use the modules of memory 667 Mhz (533 Mhz is also possible).

  I advise to use SODIMM 200 PIN DDR2 modules; 667 MHz (PC2-5300)

  You can upgrade the memory to 4 GB max. So it is certainly possible to use a 2 GB into a slot!

  Good bye

• Shares of pay - link between the type "Run" and type "Magentic report."

  Hello
  
  I have an obligation to change payroll online and add new fields inside for GB legislation (R12.1.3).
  In this particular VO, I have payroll_action_id of information for the archiving process.
  
  In PAY_PAYROLL_ACTIONS_V, I can see a record of type 'Run' and type 'magnetic report '.
  I have the payroll_action_id of type 'magnetic report '.
  Please let me know how can I associate the type of 'Magnetic report' and type 'Run' associated with this payroll run?
  
  Thank you!

  I'm not sure the legislation of GB, but generally the magnetic transfer is executed after the process of advance payments. This will generate an output file from the Bank in a secure directory and you can use it to treat bank transfers for your employees.
  The payroll_action_id is concerned, you should find this information in the pay_action_interlocks table.

• Deleted lines flashback: unable to read data - table definition has changed

  Hi all
  
  Its really Important.
  
  I unfortunately truncated a table using
  Trancate table mytable;
  
  and made an alter table to reduce the length of the pricision data.
  
  But I need back data of tabla
  
  I used the command to get the deleted lines, below, it shows error.
  
  query: select * from pol_tot versions between timestamp systimestamp-1 and systimestamp;
  error: ORA-01466: unable to read data - table definition has changed
  
  query: flashback table pol_tot to timestamp systimestamp - interval '45' minutes;
  error: ORA-01466: unable to read data - table definition has changed
  
  Well want to share your ideas how can I deleted thoose Records.
  
  Edited by: 887268 July 8, 2012 12:26

  This

  and Made a alter table to decrease data pricision length.
  

  is the cause of your error.

  Now please do what is obvious.

  -------------
  Sybrand Bakker
  Senior Oracle DBA

• Findout incompatibility records between the two tables.

  I need help on findout the unmatched records between two different tables.
  
  Each table has a + 42Crores Records.
  
  The type of data (Char) are the same for the two tables but datalength is different between a table and the table B.
  
  Indexes are created on the two tables on the required fields
  
  There is no Geom data exists on the two tables.
  
  
  
  For example:
  
  A Table: =.
  Number of records + 42Crores
  Rating: TOLD char (20)
  
  Table B: =.
  Number of records + 42Crores
  Field: TOLD Char (16)
  
  I took individual accounts, there are number of difference is 3868 only, with respect to the count (*) selection.
  
  I ran the query "Select TOLD OF A LESS SELECT TOLD OF B", but I don't have the answer.
  
  Please let me know how to solve the problem.

  The variable length char shouldn't be a problem...
  You just need to ensure that the first table has more lines than the second, if the problem persists You ' l I hide it, and then use a column alias...

  Let know us...

• How can I reset Library Center of track records and files

  Original title: Media Center in Vista

  I had set up to monitor records, but subsequently changed his mind.  I put stop monitoring the folders that I didn't but the folders and files are always in the library.  How can I reset Library Center of track records and files.  In other words delete the reference to the files and now no watched folders.

  Hi Rose945,

  Try to rebuild the Media Center data store and check if it helps to solve the problem. To do this, follow these steps:

  (a) exit any running instance of Windows Media Center.

  (b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:

  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB

  To remove the file, follow these steps:

  (a) click on start, then run.

  (b) in the Open box, type run and then click OK

  (c) If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  (d) in the Open box, type %systemdrive%\programdata\microsoft\ehome and then click OK.

  (e) in the details pane, right-click right mediacenterdatastore.db and then click on remove.

  (f) click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.

  Restart Windows media center, then check

• ULaw and alaw record and play G711

  I want to be able to capture and play directly to the a - law and u - law format.  I have read several posts on how to put the reader (capture in my case) in amr and pcm mode.

  Capture of AMR and PCM is not a problem, but the correct string of capture to capture the u - law data is unknown to me.

  for the record:

  capture://audio? Encoding = PCM works, also tried something like:

  capture://audio? Encoding = PCMU (does not), also tried to replace with pcmu, ulaw, audio/x-ulaw

  capture://audio? Encoding = AMR (works)

  When I exit the capture I get supported types:

  Device supports capture Type: audio / amr
  Device supports capture Type: audio / basic
  Device supports capture Type: audio / x - gsm
  Device supports capture Type: image / jpeg

  To play, I think that I should put the x - wav player and provide good wav header, will try later, but my first concern registers directly as G711.

  I'm running on Simulator and device (BB Torch v6) which should be able to support the u-law/a-law.

  someone at - there more information on this? It is not possible or should I put the recorder in pcm mode and convert my data on the fly?

  Hi James!

  Registration is only linear PCM.  The reading can be linear, G711 uLaw and alaw for PCM.  On a BlackBerry audio/basic = audio/pcm.

  If you are interested, GSM is GSM6.10 of recording and playback, AMR's locker AMR - NB 12.2 Kb/s (unless you specify voipMode = true in your locator, but I will not go into these details, you can search the forums if you need more information on this) and any mode of AMR - NB valid for playback (only three units I know can also playback AMR - WB and AMR - WB +).

  Finally, to save some time there is code attached to this question (if you can connect, related to this thread) who has code to generate headers wav on the Blackberry platform for you.

• dynamically create files (.txt/.doc/.css etc.) and save the table as BLOB without file system reference

  Hi guys,.

  IAM trying to find a plsql/pkg process that creates a file for example myiphones.txt (with content) and save this file as BLOB directly in a table in the DB (not on file system moreove there is no access to the file system) - Ive studied this but nothing about other than as_pdf3 that iam still working on.

  Here are the summarized steps:

  -------------------------------------------

  1. run plsql to create a single file like myiphone.txt,

  2. in this (myiphone.txt) inserts a record content from another table EMP as,

  MYiPhone.txt

  ============

  Greg Taylor,

  Mike Owen

  3 then finally record this (myiphone.txt) in another table MYFILES as BLOB - Note Please that I don't want to not refer to file system manager and I have not access to it for the time being,

  I hope it is clear

  no idea about the way to handle this is appreciated?

  Thank you.

  You can try this:

  Data are from a clob table.

  DECLARE
    L_BLOB BLOB;
    L_CLOB CLOB;
    L_DEST_OFFSET INTEGER := 1;
    L_SRC_OFFSET INTEGER := 1;
    L_LANG_CONTEXT INTEGER := DBMS_LOB.DEFAULT_LANG_CTX;
    L_WARNING INTEGER;
    L_LENGTH INTEGER;
  BEGIN
  
    -- create new temporary BLOB
    DBMS_LOB.CREATETEMPORARY(L_BLOB, FALSE);
  
    --Select CLOB
    SELECT CLOB_VAL INTO L_CLOB FROM MY_TABLE;
  
    -- tranform the input CLOB into a BLOB of the desired charset
    DBMS_LOB.CONVERTTOBLOB( DEST_LOB => L_BLOB,
    SRC_CLOB => L_CLOB,
    AMOUNT => DBMS_LOB.LOBMAXSIZE,
    DEST_OFFSET => L_DEST_OFFSET,
    SRC_OFFSET => L_SRC_OFFSET,
    BLOB_CSID => NLS_CHARSET_ID('WE8MSWIN1252'),
    LANG_CONTEXT => L_LANG_CONTEXT,
    WARNING => L_WARNING
    );
  
    -- determine length for header
    L_LENGTH := DBMS_LOB.GETLENGTH(L_BLOB);  
  
    -- Your custom INSERT INTO statement
    INSERT
      INTO MY_TABLE
       (NAME,
        BLOB_FILE,
        BLOB_LENGTH
       )
       VALUES
       ('lala.txt',
        L_BLOB,
        L_LENGTH
       );
  
    EXCEPTION
    WHEN OTHERS THEN
    DBMS_LOB.FREETEMPORARY(L_BLOB);
    RAISE;
  END;
  

  Concerning

  Tobias

• GLPURGE, Archives of GL and purging what tables remove?

  I need to know how the process of 'GL Archive and Purge' works when the purge of the records in the GL tables. Also delete the data permanently deleted the GL tables, does perform any other action on the tables or the data?

  I don't think so, apart from the logic to delete the data in tables, it could also be updated for the other columns that will miss us, if we use explicitly remove commands. In addition Oracle does not directly support update or delete data from base tables, you can check raising a SR.

• Need urgent help to run the PL/SQL function when executing is having IN OUT type of table.

  Created under object types.

  (1) CREATE OR REPLACE TYPE INVENTORY_ITEM_ID_TAB IN THE TABLE OF THE NUMBER;

  --

  (2) CREATE OR REPLACE TYPE ITEM_TYPE_REC AS OBJECT (ITEM_ID ISSUE

  , ITEM_VALUE VARCHAR2 (4000)

  );

  --

  (3) CREATE OR REPLACE ITEM_TYPE_TAB AS TABLE ITEM_TYPE_REC;

  The function code

  FUNCTION XXqp_get_pts_model)

  p_item_id_tab IN INVENTORY_ITEM_ID_TAB)

  RETURN ITEM_TYPE_TAB

  IS

  l_ITEM_TYPE_TAB ITEM_TYPE_TAB: = ITEM_TYPE_TAB();

  ln_org_id NUMBER;

  BEGIN

  L_ITEM_TYPE_TAB. DELETE;

  l_ITEM_TYPE_TAB. EXTEND;

  LN_ORG_ID: = FND_PROFILE. VALUE ("QP_ORGANIZATION_ID");

  SELECT ITEM_TYPE_REC (EGO. INVENTORY_ITEM_ID,

  C_EXT_ATTR10)

  LOOSE COLLECTION l_ITEM_TYPE_TAB

  To ego_mtl_sy_items_ext_b ego.

  ego_fnd_dsc_flx_ctx_ext ag,

  fnd_descr_flex_column_usages atr

  WHERE ego.attr_group_id = ag.attr_group_id

  AND ag.descriptive_flex_context_code = atr.descriptive_flex_context_code

  AND ag.application_id = atr.application_id

  AND ag.descriptive_flex_context_code = 'XXEGO_PRICE_INFO. '

  AND atr.end_user_column_name = 'XXEGO_PLAN_TO_SELL. '

  AND IN ego.inventory_item_id

  (SELECT

  (SELECT inventory_item_id

  OF MTL_SYSTEM_ITEMS_B

  WHERE segment1 = A.item_name

  AND organization_id = ln_org_id

  ) inventory_item_id

  OF geqp_apl_pricelist_sku_tbl A

  )

  AND ego.organization_id = ln_org_id;

  RETURN l_ITEM_TYPE_TAB;

  end XXqp_get_pts_mode;

  Below the code works fine BUT when calling function in pl/sql dynamic mode it does not underneath.

  ---------------------------

  Labour Code

  ---------------------------

  DECLARE

  CURSOR c1 IS SELECT (SELECT inventory_item_id

  OF mtl_system_items_b

  WHERE segment1 = A.item_name

  AND organization_id = 83

  ) INVENTORY_ITEM_ID

  of XXqp_apl_pricelist_sku_tbl;

  L_INVENTORY_ITEM_ID_TAB INVENTORY_ITEM_ID_TAB: = INVENTORY_ITEM_ID_TAB();

  L_ITEM_TYPE_TAB ITEM_TYPE_TAB: = ITEM_TYPE_TAB();

  LV_CHAR VARCHAR2 (1000);

  LV_QRY VARCHAR2 (1000);

  BEGIN

  --

  l_inventory_item_id_tab. DELETE;

  OPEN c1;

  LOOP

  C1 FETCH BULK COLLECT INTO L_INVENTORY_ITEM_ID_TAB;

  OUTPUT WHEN c1% NOTFOUND;

  END LOOP;

  CLOSE C1;

  SELECT XXQP_APL_ELIG_TCA_DEV_PKG. XXQP_GET_PTS_MODEL (L_INVENTORY_ITEM_ID_TAB)

  IN L_ITEM_TYPE_TAB

  FROM DUAL;

  --

  FOR j IN 1.l_ITEM_TYPE_TAB. COUNTY

  LOOP

  DBMS_OUTPUT. PUT_LINE (L_ITEM_TYPE_TAB (J). ITEM_VALUE);

  END LOOP;

  END;

  ---------------------------

  Code does not

  ---------------------------

  DECLARE

  CURSOR c1 IS SELECT (SELECT inventory_item_id

  OF mtl_system_items_b

  WHERE segment1 = A.item_name

  AND organization_id = 83

  ) INVENTORY_ITEM_ID

  of GEqp_apl_pricelist_sku_tbl;

  LV_QRY VARCHAR2 (1500);

  L_INVENTORY_ITEM_ID_TAB INVENTORY_ITEM_ID_TAB: = INVENTORY_ITEM_ID_TAB();

  l_ITEM_TYPE_TAB ITEM_TYPE_TAB: = ITEM_TYPE_TAB();

  BEGIN

  l_inventory_item_id_tab. DELETE;

  OPEN c1;

  LOOP

  C1 FETCH BULK COLLECT INTO L_INVENTORY_ITEM_ID_TAB;

  OUTPUT WHEN c1% NOTFOUND;

  END LOOP;

  CLOSE C1;

  LV_QRY: = ' START: 1: = XXQP_APL_ELIG_TCA_DEV_PKG. XXQP_GET_PTS_MODEL(:2); END;';

  DBMS_OUTPUT. Put_line ('-> lv_qry' |) LV_QRY);

  IMMEDIATE EXECUTION in USING LV_QRY IN l_INVENTORY_ITEM_ID_TAB, OUT l_ITEM_TYPE_TAB;

  END;

  Kindly help me out here in the execution of the function from PL/SQL runtime which is having IN OUT type of table.

  Kind regards

  Devendra

  Wrong code

  IMMEDIATE EXECUTION in USING LV_QRY IN l_INVENTORY_ITEM_ID_TAB, OUT l_ITEM_TYPE_TAB ;

  When I use the code below, able to perform the function without any error.

  EXECUTE LV_QRY IMMEDIATELY WITH THE HELP OF THE L_ITEM_TYPE_TAB, IN L_INVENTORY_ITEM_ID_TAB;

  Thank you all for your help in fixing the code.

• Hide and display a table made by programming based on the State

  Hi all

  I have two tables in my page. I have a requirement to hide and show a table advanced programmatically based on a condition.

  I used the following statement to hide and show the edge table. But still the table appears on my page.

  If (TblBn! = null)

  {

  TblBn.setRendered (true);

  }

  If (TbBn! = null)

  {

  TbBn.setRendered (false);

  }

  Anyone has any idea on this?

  Yes, you could do this using SPELLS.

  Create a VO model with 2 attributes say "RenderTable1" and "RenderTable2" of type Boolean.

  Set the corresponding attributes in the attribute of the AdvancedTable.

  Write methods in AM below.

  public void createPVORow()
       {
            OAViewObjectImpl dummyPVO  = (OAViewObjectImpl)getXXDummyPVO1();
            if(dummyPVO != null)
            {
                 if(dummyPVO.getRowCount() == 0 )
                 {
                      Row dummyPVORow =  dummyPVO.createRow();
                      if(dummyPVORow != null)
                      {
                           dummyPVORow.setNewRowState(Row.STATUS_INITIALIZED);          
  
                           dummyPVORow.insertRow(dummyPVORowRow);
                      }
                 }
            }
       }
  

  public void setDummyPVOValues(String[] name,String[] val)
  {
     OAViewObject dummyPVO  = (OAViewObject)getXXDummyPVO1();
     if(dummyPVO != null )
     {
      dummyPVO.setRangeSize(-1);
      Row row = dummyPVO.getRowAtRangeIndex(0);
      if(row != null)
      {
    for(int i = 0; i < name.length; i ++)
    {
    if("Y".equals(val[i]))
    {
     row.setAttribute(name[i],Boolean.TRUE);
    }
    else
    {
     row.setAttribute(name[i],Boolean.FALSE);
    }
    }
      }
     }
  }
  

  Call the two methods in the PR with appropirate parameters.

  Call the second method with parameters of the useful, likely only in the PFR State-based.

  It will be useful.

  See you soon

  AJ