Recorded image is very pixelated on iPhone, seeking repair

Similar Questions

• When I export a photo from lightroom, the image is very pixelated.

  When I export a photo from lightroom, the image is very pixelated. This Burr occurs regardless of whether I do adjustments in Lightroom.  It seems that place just the photo in it develop modual without doing anything to it taints the image in such a way that when it is exported from the modual develop the export pixelated fate.

  There is a radical difference between these two images. Incredibly, export of Lightroom has been shrunk down so it has fewer pixels. This means that if you try to display them on a similar screen size, you will need to expand by zoom. Really just, which increases the size of the pixels, so pixilization. He looks exactly like its original size. I think you should just turn off the Image resizing option (uncheck the Resize to fit) in your export settings to get the quality you are looking for.

• The photos in photo looks blurry, with large pixels. Recorded images were of high resolution, why what is happening?

  I used the migration assistant to transfer all the data from my old macbook pro to my new iMac, now the images in the Photos seem to be blurred, with large pixels. Recorded images were of high resolution, why what is happening? Is it possible to fix it. In the old macbook pro, the image looks ok.

  Migration assistant has a really bad experience with iPhoto and Photos

  If you still your old MB of available space, connect it to your new Mac (network, mode target firewire or use an external to the Mac OS extended (journaled) format hard drive and drag the iPhoto library folder images on the new Mac and heck the iPhoto library to icon in the Dock to migrate Photos)

  I hope this will work better

  LN

• Why my button images do not distort on iPhone 5s, but not on the iPhone 6?

  Hello

  I created my site to have images as buttons. They look fine in the muse, but looking at my mobile page published on the iPhone 5 s, certain images are distorted / rearranged / misplaced. But when I test the same page on iPhone 6, images are very good. Please let me know if you have any fix for this.

  I've attached a screenshot of the iPhone vs iPhone 5s 6.

  IPHONE 5 S

  

  IPHONE 6

  

  See you soon,.

  Ben

  Clear your browsers cache and reset your phone.

• When paused in the timeline the video is very pixelated and has red and yellow lines going down it

  When paused in the timeline the video is very pixelated and has red and yellow lines going down it.

  He plays very well, but when any display of still images he look like the image below. Someone knows how to fix this?

  

  Hey Danny,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and it should work.

  Check out this post on the forum for more details: Heads up on first with El Capitan

  Kind regards

  Navdeep Pandey

• Fresh install on SSD (image blurryor very fragile) problem?

  Hello

  so I have a new SSD and a new system installs on windows 7 pro 64-bit.

  Let me make a new project and a video as usual (before I get my SSD drive), and if I push the play button I get a very "fragile" image (see photo, very difficult to explain... and search the forum)

  If I resume and advance frame by frame (with the arrow) the image is 'fragile' (left side of image) then get normal after a second (right-hand side of the photo) perhaps.

  

  Note: It is two different screenshot as a before / after.

  Test I've done, it can help?

  I have the new project, and then restart my computer with my old system = > same problem

  Then I create a new project (called 2) on the old system and add the video = > no problem

  Then restart on the new system and open a project 2 = > same problem

  If I open the video with VLC = > no problem

  I have Premiere pro resinstall.

  (When I installed first of all, I get a problem with quicktime that make one very very long opening of the Prime Minister, so I reinstalled quicktime also)

  Thanks for reading and if you could help .

  My system is:

  Core i7 920

  12 GB OF RAM

  ASUS P6T

  NVIDIA GTX275

  OCZ Vertex 2 as disk system (and first car)

  1 TB drive HARD 7200 RPM for drive project

  WD velociraptor for cache drive. (old system disk, still in progress)

  
  

  Software:

  First pro CS5

  QuickTime 7.6.9

  Windows 7 pro 64-bit

  My camera is a Sanyo Xacti HD1010, taken from view at 720 p 30 fps.

  Info Media gives this:

  Format profile: Base Media / Version 2
  Identifier of the codec: mp42
  File size: 469 Mio
  Duration: 7 min 10 s
  Overall average: 9 145 Kbps
  Name of the movie/Plus: SANYO HD1010 DIGITAL camera
  Encoding date: UTC 2010-12-29 16:30:28
  Marking date: UTC 2010-12-29 16:30:28
  Origin: Digital camera
  TAGS: O DIGITAL CAMERA

  Video
  ID                                       : 1
  Format: AVC
  Format/Info: Advanced Video Codec
  Format profile: [email protected]
  Parameters of the format, CABAC: no
  Parameters of the format, Reframes: 2 images
  Identifier of the codec: avc1
  Identifier of the codec/Info: Advanced Video Coding
  Durée                                           : 7mn 10s
  Type of rate: Variable
  Flow: 9 009 Kbps
  Width: 1 280 pixels
  Height: 720 pixels
  Screen format: 16: 9
  Frame type: Constant
  Second normal images: 29 970 FPS
  Color space: YUV
  The chrom subsampling: 4:2:0
  Color depth: 8 bit
  Image type: progressive
  /(pixel*image) bits: 0,326
  Stream size: 462 million (99%)
  Language: English
  Encoding date: UTC 2010-12-29 16:30:28
  Marking date: UTC 2010-12-29 16:30:28

  Try changing your resolution of reading at full resolution, so that your CPU does not get bogged down scaling of the resolution.

• Creating shadow becomes very pixelated

  Hi all

  I'm working with images with shadows - litters and they continue to pour in on extremely pixelated... Is there a way to get around this?

  First I made the images with shadows in Illustrator, and they seemed very well here. When I copied them into Flash, they have become pixelated.

  I got rid of the shadow in Illustrator and then he redid directly in Flash using the scope Filter/shadow property. He'll still come out very pixelated, even on the setting of 'high quality '.

  is there a way to get around this?

  Thank you.

  Pat

  You can try to go into the properties of the bitmap image and select 'Allow smoothing' to see if that helps (click with the right button on the image in the library and select properties).

  Another way that should not affect the image is to create a rectangular movieclip you apply shadow, for its size for the image and place the image above it.

• Backlight problem Tecra A2 - image is very small

  Hello
  I have a Tecra A2 with a backlight problem.
  The LCD displays properly, but without any backlight, the image is very low.

  When the laptop is started is turned perfectly for about 3 seconds before turning off. Boots of portable code and can be used with an external monitor. If I close it now the backlight of the laptop turns on for a few seconds before turning off again. I tried a new Backlight Inverter which had no effect. Sensor lid closed is the magnetic type (no doubt a reed relay) and measure 100Kohms when open? and 0 ohms when closed.
  This 100K would be the problem?

  Everyone knows one of these symptoms or matter that has any backlight data converter, I wonder if I have a second faulty inverter.

  This could be a faulty back light FL problem?

  Any help would be greatly appreciated.

  You're just Philip.

  For me, it looks like the defective inverter FL too
  You said that the display on the external monitor looks fine. So we can eliminate a GPU fault.

  I think that your should contact the ASP in your country. The technician must check the defective part (probably FL inverter) and need to replace it with a new, compatible.

  > I wonder if I have a second faulty inverter
  I see you've already replaced the inverter a FL and the issue still seems hmm to be honest, I think you used a bad, but who knows that nothing is impossible.

  Then ask the technician to ASP for later handling

  Best regards and good luck

• How to record images of 8 bits of a TCP connection with a smart camera

  Hello my name is Cris and I try to record images 8-bit generated from a Smart Camera NI 1742, which has a frame rate up to 60 images per second. I want pictures of flow time I need and save each image. I've currently implemented the next VI I found in this article: Images streaming of a Vision Compact to a local AVI system , one of my goals was the next, can save an AVI file and now I can do it. According to this article on the screws flattens the images for data of type string, and sends the data to the local computer (PC) through TCP/IP communication (because data can be stored inside the smart camera).  Then, the Local.vi (shown in the figure), on the computer local Windows, receives the string data, it unflattens back to images and records the images in an AVI file. So my question is how can I proceed to receives the string data and save it directly to files with names like 0001.jpg 0002.jpg, etc., automatically instead of using framework for writing to AVI?. I think to use the IMAQ write string that returns a string that contains the entire contents of the image encoded as an image file and the string can be saved to the file (without unflatten it). How can I change the Local.vi?

  Any help, comments help a lot. Thank you.

  
  

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• OfficeJet Pro 8600, Windows 7, any type of document with an image prints very slowly

  OfficeJet Pro 8600 Premium.  Windows 7 32 bit, any type of document with an image prints very slowly including .doc. Docx, pdf. Even when printing in draft mode.  Other documents are very well

  Take a look at this link.

• . Files NEF (Nikon D600) in Camera Raw (bridge CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good.

  . Files NEF (Nikon D600) in Camera Raw (Adobe CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good. There is no update available.

  As it appears in Camera Raw

  

  Exported

  

  In Bridge, open camera raw preferences and uncheck the option of graphics processor at the bottom of the dialog box.

• Some images are extremely pixelated in typical display

  Some placed images are extremely pixelated. I know that in typical preview images are of poor quality, but it's extreme.
  

  I think I know what the problem was: the image was 17 x 12 mm and 7620 ppi. Place in indesign is 1400%, that's why he was extremely pixelated...
  7620 ppi = 3000 pixels/cm, so I think that the photographer wanted to make the images for printing (standard) 300 ppi, but rather misspelled...

• I have 4 recorded images.  Each is opened in a separate tab.  How do I drag each on a single file?

  Newbie looking for help here.  I have 4 recorded images.  Each is opened in a separate tab.  How do I drag each on a single file?

  I find that the easiest way is to organize a 4up on the screen and then use the move tool to drag between windows.

  Window > arrange > 4up

  

• Is there a lightbox to record images, which I am interested?

  Is there any function "save to lightbox" to record images, which I am interested?

  If you are a subscriber to creative cloud you can add libraries that basically the same work as light boxes with the exception that they are available directly in your applications such as Photoshop Adobe, etc.