Recording of data and their use

Similar Questions

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• Need to view daq reads per second but only to record a reading every 10 minutes. I would also like to record the date and time, at the same pace. Need help

  Need to show daq reads per second, but only to record a reading every 10 minutes, need help

  You are also looking to taste to 1 Hz data acquisition?

  My approach would be to use the DAQ acquisition to time your loop display reading each acquisition, then use the loop counter to control the logic of your writing to file.  For 1 Hz and 10 minutes write I would use 'quotient and remainder' I / 600; If rest = 0, then write the data point.

  For the date and time, under Calendar palette use the time get in seconds food a DateTime Format to a string.

• How to activate the historical record with date and time in EBS

  All,
  
  I created a custom form in 11.5.10 instance. The table on this form has all those which columns in it, and it is filled in the table of database as well as the date and time. But, when I go to the EBS and open the form and click on "Historical Record" it just shows the date of creation/update, but not this time.
  
  Can someone please give me an idea how to display time as well in the history of record?
  
  -VRDida

  The Important thingbis the type of data in the forms. If only one date, the part of hour is missing. If the Datetime, the timepart is there. Have you tried to check the values during execution by using the feature review?

• retriving records with date and time stamps

  I need to get all records that have been updated between 08:36:06 and 08:36:09 12/15/2009
  
  I use this application it gives me the numbers on the right (I think) because this condition GURMAIL_CPLN_CODE = 'UGAP', I want something more
  using the stamp date and time with dates

  12/15/2009 08:36:06 AM
  12/15/2009 08:36:07 AM
  12/15/2009 08:36:08 AM
  12/15/2009 08:36:09 AM

  select * from GURMAIL
  where 
  PERMAIL_CPLN_CODE = 'UGAP'
  AND TO_CHAR(PERMAIL_ACTIVITY_DATE,'MM/DD/YYYYHH24:MI:SS AM') >= '12/15/2009 08:36%'

  Thank you

  face-> Office (while exclaiming in despair "¿Dang, now how could I miss that?")

  Yes, Max, you're right, thanks for being there!
  When I never learn never to post a reply, unless I ran the code me first? ;)
  In any case: bed here now, ciao!

• Another question on local Variables and their use.

  I have read many many posts on forums how we avoid the use of locals at all costs because they go against the stream of LV paradigm however I tried to find a way to replace them in my programs and do not have.

  Basic explanation:

  I use a state machine to browse specific validation test steps and test of electronic equipment of base. (Panels, timers, relays moduals fuses) Many of these facilities contain LED indicator. In the tests, I took photos of the products and then used the Boolean flags to replicate the LED on the PC so that the test operators can check to make sure the equpiment LED turns on as needed. My problem is that many products contain 20 + LED and have no order to how they are turned on. Because of this that I eventually do a boolean for each LED indicator, put all the indicators in a structure of disabled, then using local Variables at each step to display on the FP LED should now be on. It's often a lot of locals throughout the program.

  I tried to make a very basic sample of VI to try to show what is a normal procedure. How can I reduce the amount of local Variables without increasing the complexity of my VI?

  If the LED change of State within the meaning of the criterion - within the case statement - you need a parallel loop.

  I did a heap of your LED and does an architecture of producer/consumer of your case, 'Test 2' attached.

  Edit: In my table, on the bottom line, the text should read "your 6 LEDS are now a Cluster" rather than "your 6 are LED not a Cluster."

• How can I the date and time using regular expressions

  Hi all

  I have depolyed filtering the log agent. While setting properties, I would like to recover the file that is generated at the present time, but along the way, I am unable to define, what regular expression that I provide retireves date and time specific file...

  Leave with kindness, men know is it possible to do?

  Thanks in advance.

  Shiva

  This seems to be the same question I can't add a timestamp in logfilter, so I'll answer in this thread. Please check the two wires as "Answered" when the issue has been resolved.

  Kind regards

  Brian Wheeldon

• Types of Apple ID and their uses as pseudonyms AIM

  Hello

  Apple used to have two methods of creating an Apple ID.

  One was to register and email outside and connect with that.

  The other was to create an ID @mac.com

  This could be a trial account in the beginning or paid to the account.  Paid accounts gave access to additional features.

  Trial accounts would end automatically but the ID would continue to work for iChat under a valid AIM screen name (you added it as if it were OBJECTIVE and used the Apple password.

  Unused accounts would also retain their ability to works like pseudonyms AIM

  The MobileMe Service, which was also paid, but also came with a trial period came later.

  The trial had to be cancelled before the trial ended, or you have been charged and no longer work as pseudonyms AIM

  Expired account also is more worked if it is not paid for.

  In the variation between the services there two you can choose to link all @mac.com account and @me.com ID.

  For the mail, they worked as an ID but in iChat and Messages later, they worked as separated as pseudonyms ID valid even if the passwords are the same.

  More recently, we have iCloud who has less services that are related, but are free.

  More Apple ID can be linked to iCloud and this includes those indicated above and any other from other e-mails apart from the setting in place of Apple.

  This may mean that you have @mac.com, @me.com (related to iCloud f) and an ID of @icloud related to Apple who worked as separate from the screen in the iChat application names.

  You may also have an external e-mail that you access iCloud who may have given you a @me.com address so early and a @icloud.com later one more which are related, but, again, are distinct pseudonyms valid for the objective.

  You will notice the italic "worked" in clause 2 above.

  On July 1, 2014 Apple and AIM changed this OS X: ID me.com or mac.com with AIM in iChat requires OS X v10.7.2 or later - Apple Support

  OS X 10.7.2 brings a change to iChat 6.

  At this point the Messages saved in both objective and Apple to confirm it was you connect.

  iChat 1 so 5 and the beginning iChat 6.0 does not have this connection double check capacity year old ID does not work.

  In truth, neither do @iCloud.com those but older apps do not list add the options of "@icloud.com ' screen names.

  These names all work on the later versions of Messages and the latest version of iChat 6 as described above.

  

  20:50 Monday. April 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

  Hello

  If Yahoo or Google are also your call ID?

  It seems that these may be accounts in Messages as well.

  iChat Alias

• Random generation of numbers and their use in mathematics

  I m doing a project and had an idea to do a math game thing where the numbers are generated randomly in both slots. For example, it is between 1 and 100 and the other the same and then add them up. The player will have to add them together and then type them in the reply box and if it's correct or not. I need help with the coding, as I'm new to CS5.

  I worked with a more ancient and outdated Flash version a little more than a year. So I know a little things General and some of the things that must be accomplished. However, ActionScript is fairly new, and I tried to use mathematics. Random because it seems that everyone uses in their tutorials. Yet, I couldn't make it work when playing with it. After you have created the random number, as I said before, I would like to be able to add/subtract/multiply/divide them to another number for an answer, but not to display the answer until a button is hit with the response users. Any help would be greatly appreciated.

  Thank you.

  If any other information is necessary, I can give that info.

  Assuming that your implementation of the stage via the Flash IDE, you can do 4 text boxes and give them instance names leftNumber, answerNumber and mathSymbol, rightNumber. Also create a button with an instance name someButton.

  Make sure that the first 3 fields (leftNumber, mathSymbol, rightNumber are dynamic and the answerNumber field is entered).

  Set your document class hand (file-> setting Actionscript-> Document class-> tpye in 'Hand'

  Now create a new as3 at the same level as your FLA and name it Main.as

  Here is an example of code that I did very briefly to your main class.

  Obviously, this has been done short hand and needs some changes, but it should help you get started (sorry for the [lack] of formatting).

  package

  {

  import flash.display.MovieClip;

  import flash.events.MouseEvent;

  SerializableAttribute public class Main extends MovieClip

  {

  private const HIGHEST_NUMBER:Number = 100;

  private var randomLeft:Number;

  private var randomRight:Number;

  private var randomOperator:String;

  private var correctAnswer:Number;

  public void Main (): void {}

  create random numbers

  randomLeft = Math.floor (Math.random () * HIGHEST_NUMBER) + 1;

  randomRight = Math.floor (Math.random () * HIGHEST_NUMBER) + 1;

  var operatorSwitch:Number = Math.floor (Math.random () * 3) + 1;

  If (operatorSwitch == 1) {randomOperator = '+';}          }

  Else if (operatorSwitch == 2) {randomOperator = "-";}          }

  else {randomOperator = 'x';          }

  correctAnswer = solveProblem();

  setupDisplay();

  This ['someButton'] .addEventListener (MouseEvent.CLICK, checkAnswer, false, 0, true);

  }

  private void solveProblem (): number {}

  If (randomOperator == '+') {return randomLeft + randomRight;}          }

  Else if (randomOperator == '-') {return randomLeft - randomRight;}          }

  else {return randomLeft * randomRight;}          }

  }

  private function setupDisplay (): void {}

  This ["leftNumber"] .text = String (randomLeft);

  This ["rightNumber"] .text = String (randomRight);

  This ["mathSymbol"] .text = String (randomOperator);

  This ["answerNumber"] .text = '? ';

  }

  private void checkAnswer(evt:MouseEvent):void {}

  If (Number (this ["answerNumber"] .text) == correctAnswer) {}

  trace ("YOU SMART if");

  } else {}

  trace ("TRY AGAIN");

  }

  }

  }

  }

• Problem with the registration date and time: only one date is recorded

  Hello community,

  I have the following problem:

  I automatically stores the datetime values in a date column "changed_on", whenever a user saves a form.

  Unfortunately, when I show this value in a form or report, only the correct date is shown. Still, the time is 00:00. There is no time in the database value, too.

  

  Whenever a user clicks the save button in my form, the value of "changed_on" is generated by a calculation that returns "sysdate" (see image below).

  I think I tried everything now, but I can't understand how to record the date and time correctly. I already tried the format for the changed_on field mask to my preferred format, but it does nothing (jj. MM YYYY HH24).

  How can I automatically record the date and time?

  You need two things.

  1. put the mask of the P3_CHANGED_ON element to JJ. MM YYYY HH24

  2. change your source of calculation to

  TO_CHAR (sysdate, ' DD.) MM YYYY HH24 ')

  In this way, what holds the element and implicit conversion happens when recording records will match.

  Thank you

  -Jorge

• Ask help pls dates and logical.

  Hi all the gurus

  I need where I need to put togahter of series of the chronology of events in the past as a line on the dates.

  It comes to my table.

  CREATE TABLE 'GET OUT '. "" SOR_TRACKING ".

  (ACTIVATE THE "TRACKING_ID" NUMBER NOT NULL,)

  ACTIVATE THE "LETTER_ID" NUMBER NOT NULL,

  ACTIVATE THE "OFFENDER_ID" NUMBER NOT NULL,

  ACTIVATE THE 'LOCATION_ID' NUMBER NOT NULL,

  NUMBER OF "OFFICE_ID."

  ACTIVATE THE "MAIL_DATE" DATE DEFAULT SYSDATE NOT NULL,.

  DATE OF THE "RESPONSE_DATE."

  "STATUS' VARCHAR2() 30 BYTES) by DEFAULT"sent. "

  ACTIVATE THE "ENTRY_DATE" DATE DEFAULT SYSDATE NOT NULL,.

  'ENTRY_USER'(VARCHAR2) 30 BYTES) ENABLE NOT NULL,.

  'COMMENTS' VARCHAR2() 2000 BYTES).

  "First name"(VARCHAR2) 80 BYTES) ENABLE NOT NULL,.

  "MIDDLE_NAME"(VARCHAR2) 80 BYTES).

  'Name'(VARCHAR2) 80 BYTES) ENABLE NOT NULL,.

  'SIR_NAME'(VARCHAR2) 30 BYTES).

  "Address1"(VARCHAR2) 80 BYTES).

  "Address2"(VARCHAR2) 80 BYTES).

  'CITY' VARCHAR2() 50 BYTES).

  ('STATE' VARCHAR2() 30 BYTES).

  "ZIP"(VARCHAR2) 20 BYTES).

  'COUNTY'(VARCHAR2) 80 BYTES).

  'OFFENDER_TYPE'(VARCHAR2) 30 BYTES).

  DATE OF THE "LAST_MAIL_DATE."

  ACTIVATE THE "BATCH_ID" NUMBER NOT NULL,

  NUMBER OF "COMPETENCE."

  'DL_NAME'(VARCHAR2) 60 BYTES).

  'DL_OFFICE'(VARCHAR2) 60 BYTES).

  'DL_ADDRESS'(VARCHAR2) 60 BYTES).

  'DL_MAILING_ADDRESS'(VARCHAR2) 60 BYTES).

  'DL_CITY'(VARCHAR2) 60 BYTES).

  'DL_STATE'(VARCHAR2) 30 BYTES).

  'DL_ZIP'(VARCHAR2) 20 BYTES).

  "TITLE"(VARCHAR2) 10 BYTES).

  'MODIFIED_USER'(VARCHAR2) 30 BYTES).

  DATE OF THE "MODIFIED_DATE."

  KEY CONSTRAINT PRIMARY 'PK_SOR_TRACKING' ('TRACKING_ID'))

  Date of the sample

  INSERTION of REM in SOR_TRACKING

  TOGETHER TO DEFINE

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE ((, MODIFIED_USER, MODIFIED_DATE) values (781410,1,4557,110207,2809, to_date (November 5, 13 ',' DD-MON-RR'), null, 'Sent mail', to_date (November 5, 13 ',' DD-MON-RR'), "NOMA", null, 'BOB","Jolene","Luna", null, ' 20535 Valleyview Rd', null,'Boo','OK','74840','potter','STANDARD',to_date('15-FEB-12','DD-MON-RR'),30211,2809,null,null,null,null,null,null,null,'Ms.','NEEL',to_date('05-NOV-13','DD-MON-RR '));

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (190294,1,4557,110207,2809, to_date (February 8, 12 ',' DD-MON-RR'), to_date (February 15, 12 ',' DD-MON-RR'), 'Checked', to_date (February 17, 12 ',' DD-MON-RR'), 'Casper', null, 'BOB', 'Jolene', 'Luna', null, ' 20535 Valleyview Rd', null, 'Boo', 'OK', '74840', 'potter', 'STANDARD', to_date('13-DEC-11','DD-MON-RR'), 28442,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (184647,1,4557,110207,2809, to_date (December 5, 11 ',' DD-MON-RR'), to_date (December 13, 11 ',' DD-MON-RR'), 'Checked', to_date (December 15, 11 ',' DD-MON-RR'), 'Casper', null, 'BOB', 'Jolene', 'Luna', null, ' 20535 Valleyview Rd', null, 'Boo', 'OK', '74840', 'potter', 'STANDARD', to_date('09-NOV-11','DD-MON-RR'), 27985,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (157253,1,4557,102288,2809, to_date (February 3, 11 ',' DD-MON-RR'), null, 'Sent mail', to_date (February 3, 11 ',' DD-MON-RR'), 'Casper', null, 'BOB', 'Jolene', 'Luna', null, 'P.c. 146', null, 'Boo', 'OK','74840 ', 'potter', 'STANDARD', to_date('08-NOV-10','DD-MON-RR'), 25613,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (149710,1,4557,102288,2809, to_date (November 1, 10 ',' DD-MON-RR'), to_date (November 8, 10 ',' DD-MON-RR'), 'Checked', to_date (November 16, 10 ',' DD-MON-RR'), 'Casper', null, 'BOB', 'Jolene', 'Luna', null, 'P.c. 146', null, 'Boo', 'OK','74840 ', 'potter', 'STANDARD', to_date('18-OCT-10','DD-MON-RR'), 24939,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (138268,1,4557,99564,2809, to_date (June 3, 10 ',' DD-MON-RR'), to_date (June 17, 10 ',' DD-MON-RR'), 'Letter returned', to_date (June 17, 10 ',' DD-MON-RR'),'Boo ',' post office: no taking mail ', "BOB", "Jolene", "Luna", null, 20535 Valley View Rd.', null, 'Boo', 'OK', '74840', 'potter', 'STANDARD', to_date('19-MAY-10','DD-MON-RR'), 24216,2809,null,null,null,null,null,null, null) 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (128798,1,4557,91503,2809, to_date (February 4, 10 ',' DD-MON-RR'), null, 'Sent mail', to_date (February 4, 10 ',' DD-MON-RR'), 'Casper', null, 'BOB', 'Jolene', 'Luna', null, 'P.c. 146', null, 'Boo', 'OK','74840 ', 'potter', 'STANDARD', to_date('10-NOV-09','DD-MON-RR'), 23369,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (115073,1,4557,91503,2809, to_date (7 August 09 ',' DD-MON-RR'), to_date (10 November 09 ',' DD-MON-RR'), 'Checked', to_date (10 November 09 ',' DD-MON-RR'), 'Boo', null, 'BOB', 'Jolene', 'Luna', null, 'P.c. 146', null, 'Boo', 'OK','74840 ', 'potter', 'STANDARD', to_date('06-MAY-09','DD-MON-RR'), 21926,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (108510,1,4557,91503,2809, to_date (5 May 09 ',' DD-MON-RR'), to_date (6 May 09 ',' DD-MON-RR'), 'Checked', to_date (7 May 09 ',' DD-MON-RR'), 'Casper', null, 'BOB', 'Jolene', 'Luna', null, 'P.c. 146', null, 'Boo', 'OK','74840 ', 'potter', 'STANDARD', to_date('01-MAY-09','DD-MON-RR'), 21316,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (101463,1,4557,88052,2809, to_date (5 February 09 ',' DD-MON-RR'), null, 'Sent mail', to_date (5 February 09 ',' DD-MON-RR'), 'Boo', null, 'BOB', "Jolene", "Luna", null, PO Box 146, null, 'Boo', 'OK', '74840', 'potter', 'STANDARD', to_date('15-DEC-08','DD-MON-RR'), 20525,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (97272,1,4557,88052,2809, to_date (5 December 08 ',' DD-MON-RR'), to_date (15 December 08 ',' DD-MON-RR'), 'Checked', to_date (17 December 08 ',' DD-MON-RR'), 'Casper', null, 'BOB', 'Jolene', 'Luna', null, 'P.c. 146', null, 'Boo', 'OK','74840 ', 'potter', 'STANDARD', to_date('12-NOV-08','DD-MON-RR'), 20018,2809,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (to_date 68398,1,4557,76399,1070, (10 October 07 ',' DD-MON-RR'), to_date (15 November 07 ',' DD-MON-RR'), 'Letter returned', to_date (15 November 07 ',' DD-MON-RR'), 'KERRYMIN',' post office: not delivaerable then addressed ', 'BOB","Jolene","Luna", null, 752 Boo ', null, 'Norman', 'OK','73072 ', 'Cleveland', 'STANDARD', to_date('17-MAY-07','DD-MON-RR'), 16596,1070,null,null,null,null,null,null,null, 'Ms.', null) ", null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (63767,1,4557,76399,1070, to_date (9 August 07 ',' DD-MON-RR'), to_date (20 August 07 ',' DD-MON-RR'), 'Letter returned', to_date (20 August 07 ',' DD-MON-RR'), 'KERRYMIN',' post office: not deliverable as addressed ', "BOB", "Jolene", "Luna", null, 752 Boo', null, 'Norman', 'OK', '73072', 'Cleveland', 'STANDARD', to_date('17-MAY-07','DD-MON-RR'), 16077,1070,null,null,null,null,null,null,null, 'Ms.', null) ", null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (59499,1,4557,76399,1070, to_date (14 May 07 ',' DD-MON-RR'), to_date (17 May 07 ',' DD-MON-RR'), 'Checked', to_date (17 May 07 ',' DD-MON-RR'), 'LAWANHAM', null, 'BOB', "Jolene", "Luna", null, 752 Boo ', null, 'Norman', 'OK','73072 ', 'Cleveland', 'STANDARD', to_date('14-MAY-07','DD-MON-RR'), 15569,1070,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (54783,1,4557,74693,1070, to_date (1 March 07 ',' DD-MON-RR'), to_date (6 March 07 ',' DD-MON-RR'), 'Checked', to_date (13 March 07 ',' DD-MON-RR'), 'Boo', null, 'BOB', 'Jolene', 'Luna', null, '1203 Rebecca Lane', null, 'Norman', 'OK', '73072', 'Cleveland', 'STANDARD', to_date('01-MAR-07','DD-MON-RR'), 14994,1070,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP ((, TITLE, MODIFIED_USER, MODIFIED_DATE) values (34100,1,4557,58761,1094,to_date('08-FEB-06','DD-MON-RR'),null,'Mailed',to_date('31-MAR-06','DD-MON-RR'),'LAWANHAM','per M. Splawn', 'BOB', 'Jolene', 'Luna' null, 'RT. 1 Box 42' null, 'Wewoka', 'OK', '74884', 'Seminole', 'STANDARD' (to_date '03-FEB-06', ' DD-MON-RR'),9560,1094,null null null null null null, null, 'Ms.' null, null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (27562,1,4557,52781,1115, to_date (8 November 05 ',' DD-MON-RR'), null, 'Sent mail', to_date (8 November 05 ',' DD-MON-RR'), 'Boo', null, "BOB',"Jolene","Luna", null, 5590 Rebel Ridge Rd ', null", El Reno, OK ', ' 73036', 'Canadian', 'STANDARD', to_date('16-OCT-05','DD-MON-RR'), 8034,1115,null,null,null,null,null,null,null, 'Ms.', null, null);

  Insert into SOR_TRACKING (TRACKING_ID LETTER_ID OFFENDER_ID, location_id OFFICE_ID MAIL_DATE RESPONSE_DATE STATE, ENTRY_DATE ENTRY_USER COMMENTS, FIRST_NAME, MIDDLE_NAME LAST_NAME, SIR_NAME Address1 address2 CITY ,,ZIP COUNTY OFFENDER_TYPE LAST_MAIL_DATE BATCH_ID JURISDICTION DL_NAME DL_OFFICE DL_ADDRESS DL_MAILING_ADDRESS DL_CITY DL_STATE DL_ZIP ) ,TITLE,MODIFIED_USER,MODIFIED_DATE) values (11822,1,4557,39238,1094,to_date('03-MAR-05','DD-MON-RR'),null,'Mailed',to_date('03-MAR-05','DD-MON-RR'),'Boo',null,'BOB','Jolene','Luna',null,'Rt. 1, Box 42',null,'Wewoka','OK','74884','Seminole','STANDARD',to_date('17-FEB-05','DD-MON-RR'),306,null,null,null,null,null,null,null,null,'Ms.',null,null);

  Insert into SOR_TRACKING (TRACKING_ID,LETTER_ID,OFFENDER_ID,LOCATION_ID,OFFICE_ID,MAIL_DATE,RESPONSE_DATE,STATUS,ENTRY_DATE,ENTRY_USER,COMMENTS,FIRST_NAME,MIDDLE_NAME,LAST_NAME,SIR_NAME,ADDRESS1,ADDRESS2,CITY,STATE,ZIP,COUNTY,OFFENDER_TYPE,LAST_MAIL_DATE,BATCH_ID,JURISDICTION,DL_NAME,DL_OFFICE,DL_ADDRESS,DL_MAILING_ADDRESS,DL_CITY,DL_STATE,DL_ZIP TITRE (, MODIFIED_USER, MODIFIED_DATE) values (2257,1,4557,18958,1087, to_date (3 August 04 ',' DD-MON-RR'), null, "Sent mail", to_date (29 January 05 ',' DD-MON-RR'), 'SYSTEM', null, 'BOB', "Jolene", "Luna" ', null, ' ' training of 1037 Tabor, null, 'Oklahoma City', 'OK', '73107', null, null, "Oklahoma", 178, null, null, null, null, null, null, null, null, null, null, null);

  I want to find all the records where the mail date() oldest of all without the answer) and no response date and find the one earlier including the response date and display it as a line.

  For example

  mail_Date + 45 table mail_Date earlier response

  DEL_DATES END_DATE TRACKING_ID BEGIN_DATE

  17 SEP-04 3 AUGUST 04 2257 6 MARCH 07

  Other date and their date of response should be the same way

  The problem is that I am not able to retrieve other records in the tables because I use the MIN function.

  here is my request

  SELECT t. MAIL_DATE + begin_Date 45,

  del_date.del_dates,

  (St2 SELECT MIN().) Del_end_date RESPONSE_DATE)

  Sor_tracking ST2

  WHERE t. OFFENDER_ID = st2. OFFENDER_ID

  AND st2. RESPONSE_DATE > del_date.del_dates

  ) End_date.

  t . OFFENDER_ID,

  t . TRACKING_ID

  Of

  (St1 SELECT MIN().) Del_dates MAIL_DATE)

  OF sor_tracking st1

  WHERE the st1. OFFENDER_ID = 4557

  AND st1. RESPONSE_DATE IS NULL

  AND st1. MAIL_DATE < SysDate - 45

  AND st1. STATUS ('letter returned', 'sent')

  AND st1. LETTER_ID IN (1, 4)

  ) del_date,.

  sor_tracking t

  OÙ t. MAIL_DATE < = del_date.del_dates

  ET (t. OFFENDER_ID = 4557

  ET t. RESPONSE_DATE IS NULL)

  ORDER BY 1 desc

  Thank you for your time and help.

  with

  sor_tracking as

  (select 4557 offender_id

  1 letter_id,

  to_date('05-Nov-13','dd-mon-yy') mail_date,

  781410 tracking_id

  110207 location_id,

  response_date null,

  Status "sent mail".

  of the double

  Union of all the

  Select 4557,1, to_date (8 February 12 "," dd-MON-yy'), 190294,110207, to_date (15 February 12 "," dd-MON-yy'), "Verified" of any union double

  Select 4557,1, to_date (5 December 11 "," dd-MON-yy'), 184647,110207, to_date (13 December 11 "," dd-MON-yy'), "Verified" of any union double

  Select 4557,1, to_date (3 February 11 "," dd-MON-yy'), 157253,102288, null, 'By' from dual union all

  Select 4557,1, to_date (1 November 10 "," dd-MON-yy'), 149710,102288, to_date (8 November 10 "," dd-MON-yy'), "Verified" of any union double

  Select 4557,1, to_date (3 June 10 "," dd-MON-yy'), 138268,99564, to_date (17 June 10 "," dd-MON-yy'), 'Returned letter' from dual union all

  Select 4557,1, to_date (4 February 10 "," dd-MON-yy'), 128798,91503, null, 'By' from dual union all

  Select 4557,1, to_date (7 August 09 "," dd-MON-yy'), 115073,91503, to_date (10 November 09 "," dd-MON-yy'), "Verified" of any union double

  Select 4557,1, to_date (5 May 09 "," dd-MON-yy'), 108510,91503, to_date (6 May 09 "," dd-MON-yy'), "Verified" of any union double

  Select 4557,1, to_date (5 February 09 "," dd-MON-yy'), 101463,88052, null, 'By' from dual union all

  Select 4557,1, to_date (5 December 08 ',' dd-MON-yy'), 97272,88052, to_date (15 December 08 ',' dd-MON-yy'), "Verified" of any union double

  Select 4557,1, to_date (10 October 07 ',' dd-MON-yy'), 68398,76399, to_date (15 November 07 ',' dd-MON-yy'), 'Returned letter' from dual union all

  Select 4557,1, to_date (9 August 07 ',' dd-MON-yy'), 63767,76399, to_date (20 August 07 ',' dd-MON-yy'), 'Returned letter' from dual union all

  Select 4557,1, to_date (14 May 07 ',' dd-MON-yy'), 59499,76399, to_date (17 May 07 ',' dd-MON-yy'), "Verified" of any union double

  Select 4557,1, to_date (1 March 07 "," dd-MON-yy'), 54783,74693, to_date (6 March 07 "," dd-MON-yy'), "Verified" of any union double

  Select 4557,1, to_date (8 February 06 "," dd-MON-yy'), 34100,58761, null, 'By' from dual union all

  Select 4557,1, to_date (8 November 05 ',' dd-MON-yy'), 27562,52781, null, 'By' from dual union all

  Select 4557,1, to_date (3 March 05 ',' dd-MON-yy'), 11822,39238, null, 'By' from dual union all

  Select 4557,1, to_date (3 August 04 "," dd-MON-yy'), 2257,18958, null, 'By' from dual

  )

  Select offender_id,

  letter_id,

  to_char(EVENT_DATE,'dd-mon-yy') mail_date,

  tracking_id,

  Location_id,

  cases where last_response_verified is null

  then the status

  status of end,

  to_char(last_response_verified,'dd-mon-yy') response_date,

  cases where last_response_verified is not null

  then 'Verified '.

  end response_status

  from (select offender_id,

  letter_id,

  EVENT_DATE,

  tracking_id,

  Location_id,

  status,

  to_find,

  verified_response,

  LAST_VALUE (verified_response Ignore Nulls) over (partition offender_id, letter_id

  event_date desc order

  ) last_response_verified

  from (select offender_id,

  letter_id,

  EVENT_DATE,

  tracking_id,

  Location_id,

  status,

  -case when event_date< lead(event_date)="" over="" (partition="" by="">

  event_date order

  ) - 45

  then 'THIS '.

  When status = 'by '.

  and lead (tracking_id) (partition offender_id, letter_id, tracking_id

  event_date order

  ) is null

  and direction! = lag(direction,1,'null') on (partition offender_id, letter_id

  event_date order

  )

  then 'this '.

  end to_find

  -case when status = 'Verified '.

  then event_date

  end verified_response

  from (select offender_id,

  letter_id,

  mail_date event_date,

  tracking_id,

  Location_id,

  Status "Sent mail"

  direction 'sent '.

  of sor_tracking

  Union of all the

  Select offender_id,

  letter_id,

  response_date,

  tracking_id,

  Location_id,

  status,

  direction "rcvd.

  of sor_tracking

  where response_date is not null

  )

  )

  )

  where to_find is not null

  event_date desc order

  OFFENDER_ID	LETTER_ID	MAIL_DATE	TRACKING_ID	LOCATION_ID	STATUS	RESPONSE_DATE	RESPONSE_STATUS
  4557	1	NOVEMBER 5, 13	781410	110207	Mailed	-	-
  4557	1	3 FEBRUARY 11	157253	102288	-	DECEMBER 13, 11	Checked
  4557	1	FEBRUARY 4, 10	128798	91503	-	NOVEMBER 8, 10	Checked
  4557	1	7 AUGUST 09	115073	91503	-	10 NOVEMBER 09	Checked
  4557	1	5 FEBRUARY 09	101463	88052	-	6 MAY 09	Checked
  4557	1	3 AUGUST 04	2257	18958	-	6 MARCH 07	Checked

  Concerning

  Etbin

• How to see the date and time on your images?

  I use camcorder Sony HXR-NX5U to shoot my video which I then edit in Premiere Pro. How can I record the date and time based on actually recorded video? Is a function that I need to set up on the camera or these data incorporated into each HD clip and all I have to do is just to change some settings in Premier Pro, as well as the date and time appear magically on my video?

  He is a third-party software which costs $80 to show the date and time. This is not an option.

  Can I ask you why you do this?  It of a unique client work, a curiosity or are you in the business of generating media for legal needs?  Adobe has access to view the metadata of the files in the metadata panels, however, source time is not available in timecode effects and overlays customized (via the program monitor tools).  It will be manual labor, which is ok if it is the specific need.  However, if it is a constant for your business, you must consider the types of tools that apply best practices (as the camera that allows you to record recovery /) or by using a third party tool like the one I mentioned.  No free lunch.  This has been a feature of the long and often requested.

• How can I save my browser history, with dates and times included?

  I need save my history of the browser with the date and hours included. I tried to do the backup, but it saves to a JSON file and I do not know how to open that. Copy and paste into Notepad do not record the dates and times.

  Firefox is not a way to export the history to a text file. JSON in the bookmarkbackups folder backups store only bookmarks and not history.

• Date and time in a table of numbers - is it possible?

  Hello

  I have a table with specific measurement data of float and I save it in a spreadsheet, so that I can easily open it with Excel.

  Now, I want to win the date of the end of time as well.

  To achieve this, I changed the table of double chain and converted into all the numbers and the date and time strings, but it is not very economical.

  Can I record the date and time in a digital format, which excel can interpret as the date and time?

  I think the following:

  These numbers:

  39303

  0,66134502

  converted to the format of date and time in excel are:

  09.08.2007

  15:52:20

  How to convert date and time to numbers in LabVIEW, so that excel can convert to the date and time again?

  Johannes

  LabVIEW 7.1 (!)

  Hi Johannes,

  This link should help.

  http://www.Ozgrid.com/Excel/ExcelDateandTimes.htm

  Mike

• Start open used menu and cannot use the taskbar

  Hey all,.

  I am running Windows 7 Ultimate, and about 3 months after getting up my new machine and run I had a few problems.

  Symptoms:
  -Generally a few minutes after booting I can't access the start menu, bar of tasks or traditional system with the left click status bar. (it blinks for half a second, but won't.
  -Some letters, until the entries, erase all entered (at the time in AND THE command prompt)
  -Sometimes the system boots to a black screen with ' boot: ' and a command prompt available.

  I tried to restart and sfc.  System Restore is not an option (not available before the start of what happen to restorations).  I ran Kaspersky 2011, and no viruses have been detected.  No updates (I checked) or install (what I think) were made immediately before this problem occurs.  It seems to work OK now which is surprising, but he acted like this for about 4 days pretty regularly.  If she needs a wipe it is not terrible, but my OS drive is at home and I'm at school.

  Any advice or ideas would help!  Thank you!

  Hey all,.

  I am running Windows 7 Ultimate, and about 3 months after getting up my new machine and run I had a few problems.

  Symptoms:
  -Generally a few minutes after booting I can't access the start menu, bar of tasks or traditional system with the left click status bar. (it blinks for half a second, but won't.
  -Some letters, until the entries, erase all entered (at the time in AND THE command prompt)
  -Sometimes the system boots to a black screen with ' boot: ' and a command prompt available.

  I tried to restart and sfc.  System Restore is not an option (not available before the start of what happen to restorations).  I ran Kaspersky 2011, and no viruses have been detected.  No updates (I checked) or install (what I think) were made immediately before this problem occurs.  It seems to work OK now which is surprising, but he acted like this for about 4 days pretty regularly.  If she needs a wipe it is not terrible, but my OS drive is at home and I'm at school.

  Any advice or ideas would help!  Thank you!

  First of all, make sure that your system is clean:

  using the analysis
  http://www.Malwarebytes.org/ (recommended)

  If you have up-to-date virus program and perform an analysis full or if you do not get this one:
  AVG Free http://www.avg.com/gb-en/download-free-anti-virus

  Do using the analysis:

  http://www.emsisoft.com/en/software/EEK/ recommended

  You can run it from memory stick too.

  It is recommended to perform all analysis in safe mode.

  Make sure your system is clean first. use Ccleaner to get rid of the files useless http://www.piriform.com/ccleaner/download

  Make sure your windows is up to date and drivers work correctly and that they are aware also.

  Use http://www.javacoolsoftware.com/spywareblaster.html

  to protect your PC from spyware, adware etc and keep up to date and then use Firefox as your browser

  Only use the block announcement more, no script and WOT for safer web browsing for Firefox.

  Try to find which program is the cause of your PC slow boot

  Statement from here

  http://support.Microsoft.com/kb/310353

  Test your windows files

  http://www.bleepingcomputer.com/forums/topic43051.html

  Uninstall programs you don't use or not recently installed and could have caused the problem

  Please visit my blog for more tips and tricks
  http://safewordwidewebsurfing.blogspot.co.UK/