Records with old date.

Similar Questions

• How to restore a previous session to a record of old data of Firefox?

  There was a power outage today while I was start of Firefox and the computer shut down instantly. Later, when I tried to open Firefox again, he started glitching, with the option to restore Session only resulting in empty tabs. I refreshed Firefox and now I have an "Old Firefox Data" folder.

  I have a folder of sessionrestore-backups in this folder, a file 'previous.js '. How to use this file (or other folder) to access my lost session? It is possible at all?

  Thanks for any help.

  You can find these files in the sessionstore-backup folder:

  previous.js (cleanBackup: copy of sessionstore.js from previous session that was loaded successfully)
  recovery.js (latest version of the sessionstore written during runtime)
  recovery.bak (previous version of the sessionstore written during runtime)
  upgrade.js-<build_id> (backup created during an upgrade of Firefox)
  

  You can copy a file in the sessionstore-backup folder to the main profile and rename sessionstore.js file to replace the current file (make a backup of the current sessionstore.js).

• What am I supposed to do with a folder named 'Old data Firefox' and I don't remember really what I did to be saved?

  I'm not sure what I did to cause Firefox do I ASSUMED a BACKUP. Since I now have a folder named 'Old data Firefox' what do I do with it? Should I restore somehow everything that is located in this folder in my Firefox browser? Or do I need at all? What I'm missing here? No explanation, no guideance, no guidance as to what to do or how to Firefox or Mozilla. I can't even say for sure IF it I MISS SOMETHING IN MY FIREFOX BROWSER WORK NOW that has BEEN REGISTERED IN THIS BACKUP orrrrrrrrrrr do not? [email protected] Lescot

  If you have an 'Old Firefox Data' folder on your desktop, then you must have used the function "Reset Firefox", or help-> troubleshooting information page, as shown in the screenshot in this article, or in Firefox Safe Mode window, illustrated here.

  See Firefox Refresh - reset modules and parameters for more information on this feature.

  You don't need the "Old Firefox Data" folder, but you can move it to another location on your computer as a backup, if you wish. It is unlikely that you have set this folder as your current residence of profile. To find out which folder Firefox is currently using for the data in your profile, visit using Firefox-> troubleshooting information and click the Show folder. This will open the profile folder of Firefox under Windows. On Windows 7, the default Firefox profile folder would be located here (where "username" is your Windows logon user name and xxxxxxxx is a random string))

  C:\Users\"username"\AppData\Roaming\Mozilla\Firefox\Profiles\xxxxxxx.default
  

• Have just bought a new iMac and imported all my old data.  When I try to open a pages document it says that it cannot be opened because it is too old, and that to open it, I have to save it with Pages ' 09 first.  So, how he back up if I can't open it?

  Have just bought a new iMac and imported all my old data.  When I try to open a pages document it says that it cannot be opened because it is too old, and that to open it, I have to save it with Pages ' 09 first.  So, how he back up if I can't open it?

  Start the OS X App Store, then click on the item toolbar updates. V5.6.1 pages should be available, and this will open documents Pages ' 09, ' 08 and ' 06. In messages to this community, you should always share what version specific pages and OS X that you are currently using.

• The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  My O.S. is W.7. 32-bit.

  Before, I recently upgraded to XP and using MS Word 2007, I have a (short) Sound Clip of pre-registration<60 secs. )="" and="" then="" insert="" it="" into="" my="">

  A small icon that looks like a speaker appeared on the Document and that the beneficiary would have left click on it to hear the recording. The Sound Recorder with W7 now seems much more rudimentary than the old version, and I can't find any way to insert messages into My Documents.

  Is this even possible or has Microsoft taken a step backward here?

  I'd appreciate some help here. Thanks in advance. Mech-Tech.

  Original title: Sound Recorder

  If I've understood your problem, try this. Create a shortcut to "soundrecorder /file outputfilename.wav" (without the quotes).

  Then start soundrecorder via this shortcut and start and stop the recording, it will save so (hopefully) as a wav as before.

  I think the problem is, W7 soundrecorder, by default, saves to wma.

  If not, try a 3rd free part program such as Audacity (which seems like overkill, but should do the job).

  I hope this will help.

• Update records double with different data

  Hi all

  I have a specific problem of migration. Data from a large table were migrated in another table, but the data for the destination column are absent due to some problems (which are not specific to this topic).

  Currently I am updating the data for the missing column in the new table.

  The problem is due to the current data in the newtable, there the duplicate lines and I have not found a way to make a map of lines so that the data for the missing column can be updated.

  create the table ancienne_table

  (

  fileNo varchar (10),

  folder varchar (10),

  fileType varchar (10),

  col_1 varchar (10),

  col_2 varchar (10),

  col_3 varchar (10),

  col_4 varchar (10)

  );

  INSERT INTO ancienne_table (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('ABC', "Folder1", "Type1", '111', '111', ' 111', null);

  INSERT INTO ancienne_table (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('ABC', "Folder1", "Type2", '111', '111', ' 111', null);

  INSERT INTO ancienne_table (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('GHI', 'Folder3', 'Type3', '333', '333', ' 333 ', ' 333');

  INSERT INTO ancienne_table (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('JKL', 'Folder4', 'Type3', '444', '444', ' 444 ', ' 444');

  INSERT INTO ancienne_table (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('MNO', 'Folder5', 'Type4', '555', '555', ' 555 ', ' 555');

  INSERT INTO ancienne_table (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('PQR', 'Folder6', 'Type4', '666', '666', ' 666 ', ' 666');

  INSERT INTO ancienne_table (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('STU', 'Folder7', 'Type5', '777', '777', ' 777 ', ' 777')

  create table NewTable

  (

  fileNo varchar (10),

  folder varchar (10),

  fileType varchar (10),

  col_1 varchar (10),

  col_2 varchar (10),

  col_3 varchar (10),

  col_4 varchar (10)

  );

  INSERT INTO NewTable (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('ABC', "Folder1", null, ' 111 ', '111' ', 111', null);

  INSERT INTO NewTable (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('ABC', "Folder1", null, ' 111 ', '111' ', 111', null);

  INSERT INTO NewTable (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('GHI', 'Folder3', null, '333 ', '333', '333' 333');

  INSERT INTO NewTable (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('JKL', 'Folder4', null, '444 ', '444', '444' 444');

  INSERT INTO NewTable (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('MNO', 'Folder5', null, '555 ', '555', '555' 555');

  INSERT INTO NewTable (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('PQR', 'Folder6', null, '666 ', '666', '666' 666');

  INSERT INTO NewTable (fileNo, folder, file type, COL_1, COL_2, COL_3, COL_4) VALUES ('STU', 'Folder7', null, '777 ', '777', '777' 777')

  
  

  Select * from ancienne_table;

  FILENO FILETYPE COL_1, COL_2 COL_3 COL_4 FOLDER

  ---------- ---------- ---------- ---------- ---------- ---------- ----------

  Type1 Folder1 ABC 111 111 111

  Type2 Folder1 ABC 111 111 111

  IGS Folder3 Type3 333 333 333 333

  JKL Folder4 Type3 444 444 444 444

  Folder5 Type4 555 555 555 555 MNO

  nPQR Type4 of Folder6 666 666 666 666

  STU Folder7 777 777 777 777 Type5

  Select * from NewTable.

  FILENO FILETYPE COL_1, COL_2 COL_3 COL_4 FOLDER

  ---------- ---------- ---------- ---------- ---------- ---------- ----------

  Folder1 ABC 111 111 111

  Folder1 ABC 111 111 111

  IGS Folder3 333 333 333 333

  JKL Folder4 444 444 444 444

  Folder5 555 555 555 555 MNO

  PQR Folder6 666 666 666 666

  STU Folder7 777 777 777 777

  When you try to update the column of file type for all records-

  Update NewTable set FileType = (select FileType from ancienne_table where Fileno = newtable.fileNo and folder = NewTable. File);

  
  

  It would work fine for all other cases with the exception of the first two that are currently double.

  It won't work of course because it would give - "row subquery returns more rows" error because of these duplicate records.

  I'm trying to update the file type column to the first two rows with values 'Type1' and 'Type2 '.

  Out of these two files, it won't matter whose recording of newtable is updated with 'Type1' and you get 'Type2 '.

  Please help with ideas around update duplicate records with the ancienne_table-specific data into newtable.

  Him below will work... You can update using ROWID, but the lines are duplicated. Must therefore first to define any id for these two lines replicated using row_number and then correspond with rn for the IDENTIFIER specified.

  MERGE INTO NewTable nt help

  (WITH qry1 AS

  (SELECT ot. File type,

  ot.fileNo,

  OT. Folder,

  ROW_NUMBER() ON rn (PARTITION BY ot.fileNo, ot.folder ORDER BY 'A') - you can get the line number based on any order

  Of ancienne_table ot

  ),

  qry2 AS

  (SELECT nt. File type,

  nt.fileNo,

  NT. Folder,

  ROW_NUMBER() over (PARTITION BY nt.fileNo, nt.folder ORDER BY 'A') rn,-you can get the line number based on any order

  NT. ROWID rd

  OF NewTable nt

  )

  SELECT q1.filetype,

  Q2.Rd

  OF qry1 q1

  JOIN qry2 q2

  ON q1. Folder = q2. Folder

  AND q1.fileNo = q2.fileNo

  AND q1.rn = q2.rn

  AND q2. FileType IS NOTHING - if necessary add this condition

  ) q1 ON (nt. ROWID = q1.rd)

  WHEN MATCHED THEN

  Updated the VALUE of filetype = q1.filetype;

• I work with CS6 on PC. Since yesterday, I can't print my old data. But I can print a new one, I created since yesterday.

  I work with CS6 on PC. Since yesterday, I can't print my old data. But I can print a new one, I created since yesterday.

  What happens when you try to print?

  Photoshop returns an error message?

  Please make sure that your drivers are up-to-date.

  Kind regards

  Assani

• Why have I not two record creative Cloud suddenly with different data in each folder (a folder called Creative Cloud Files (unknown))

  This morning, I've connected and started working as usual. When I went to save on I noticed a new folder in the Bridge, called "Creative Cloud Files (unknown) without data in it. Weird, but what ever. So I recorded my file and dinked around a structure of files and cleaned a little. I have noticed that my sharing icon disappeared from records and questioned on this subject, but kept the job because I'm on a deadline.

  So now it is wobbly data to the new file folder that does not match the original file of CC. I don't know where are my latest files and some files are all simple missing. I'm increased and confused about what is happening. Can someone shed some light on this?

  With the recent update of the application of Creative Cloud Desktop (1.9.1.474), we have unfortunately introduced a bug that causes the creation of a new Creative Cloud Files folder and re-synchronization of all content. This will happen only the first time that the synchronization application runs after the update. This caused an understandable pain and confusion, for which we really apologize.

  Creative application Cloud Files contains a logic that supports the use of several Adobe ID. This allows to disconnect from an ID and in, but keeps the contents of your separate creative cloud. When you sign out and change identifiers, the app moves the previous creative Cloud Files folder and it's content and he adds with the already signed in ID (User@AdobeID). Then, it creates a main folder and begins to synchronize the content of the identification of new.

  The bug I mentioned earlier occurs, as the app believes an ID selector took place and as such, moves the current record of Creative Cloud Files and attempts to annex the already signed in ID. As no switch actually took place, it manifests as (unknown).  The application then creates a main folder to synchronize the data.

  What you end up with is essentially a creative Cloud Files folder with your new synchronized data and a creative Cloud Files (unknown) folder that contains duplicate data.

  This happens once, after the last update.

  The solution is to simply delete the (unknown) Creative Cloud Files folder.

  I recommend that ensure you that you have no pending change you can do offline and you check the contents of the folder new, main designer Cloud Files contains everything you expect of him.  If this is not the case, check the contents of the creative Cloud files (unknown).

  If there is still an incompatibility with your data, you can check on creative.adobe.com to confirm that your data is there.

  If you have any other problems or questions on this topic please email [email protected]

• problem with the data record

  Hi, I'm new to LabView so I know that the thing I'm doing is relatively easy, however, I'm stuck.

  I made a small program that gets 5 steps (for now replaced with random numbers) and as well as the date and time data in the text file. I intend to run the program for long periods of time, so I want to increment the file name/path every hour, but after the addition of this part of the program does not create any file, although the program runs without error.

  Block diagram is attached, could someone point out to me what is wrong and what I should do to reach my goal?

  Thanks in advance!

  Hi marcis,.

  Acually, the logic of the program was completely wrong.

  1. your comments the file path will never help you. Because after leaving of while loop, the structure of matter will run once and LV will stops running.

  2. open and close the datalog only once file. Try to make all your manipulations between opening and closing your file datalog. Otherwise, it will be difficult to manage when you develop your code.

  3 case construction outside the loop is meaning less. If you want to run the program permanently, place all functions inside the while loop you want to run. While the loop will run continuously until you get satisfied.

  4. incorrect data streams. All programmers need well with the data stream.

  Just go into the basics of labview here and try to realize your logic again

• How to record entries of UI with the data measured in a TDM file?

  Hello

  I built a user interface to monitor and control a pump test bench, I use the USB-6212 in a Windows PC with the new SW and readers.

  Now I try to collect all the measured data and control values in the UI, permanently at 1 kHz and write it in a single file of CT.

  The problem is that only the measured signals get connected, but only a few values at the beginning of the file are saved in the user interface; then all empty.

  I have all tried, producing waveforms, synchronize them with measured data for the same stamps, aling & resample and blocks of collector of the Toolbox Signal Express, but there are still some missing data in the user interface.

  In my original configuration, indicated in the post, I set up the block of analog to read continuously at 1 kHz with 100 samples, while output and analog digital on-demand writing. I have included the file complete, just in case some block causes disruption.

  

  

  Your express DAQ screws will probably be reading/writing of multiple samples for each run, then wire you a single value for your set points. The use of the data type of dynamic signals hides this information from you (that's why nobody is using them once they become more familiar with LabVIEW).

  You need to take only the last value of dynamic data, or touch your set points so they are the same size as your dynamic data. If you write 100 samples at a time, then you will have your set points only once by 100 values. You must create a table/waveform of 100 points with the same value.

• Tax records from old computer movement; which directory should I put them given that Application data is just a junction point?

  By train to move my old data files from my PC to the new laptop, I found the files that resided in the Application Data (XP) cannot be moved to Win 7.  The year next Turbo tax will get my files in C:\Documents and settings //Applicaton data and will conclude not just her.  Where should I put my old Application data for future use because I can't access the request data AND don't know how to load if I have access under the new configuration?

  I see two answers to your question:

  • Check the Turbo Tax FAQ or ask their assistance service. A lot of people would have been in your situation.
  • The hack by creating a symbolic link to the new location. Not recommended because it is not robust.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Old data refresh - problem of mapping - OWB has not been removed.

  We use OWB 11.1.0.7 on Windows 2003. I created the dimensions and cubes and they are all worked well. The problem is when I tried to update the warehouse using new data, new data have been loaded into the dimension, but some old data were still there.
  
  In the map, I used a materialized view to map to the dimension. I checked the old data was not in the materialized view, but was still in the dimension. The steps I took were:
  
  -mv re-imported to OWB,
  -synchronized to the source and the target in the mapping.
  -related table redeployed + dimension and mapping,
  -run the process flow.
  
  And the target schema has update privileges and DBA role.
  
  In mapping out bug mode, I saw some old data + new data has been loaded. In the details on the use of excution process flow, no data has been deleted. The mv database have been inserted, but old data merged too.
  
  Could someone help me on this? Thanks in advance.
  
  Georges Nicks

  Hi Georges Nicks.

  As far as I understand - you complain that some old data stood at dimensions? That is the data existing only no more on the source (view materialized in your case) always tables exist in the target (implementation of the dimension) table. I suppose also that you use ROLAP for cubes Dimensions (are you? Or you use OLAP?).

  I also assume you are using the operator of dimension as target in your mapping? How OWB keeps changes in your target size depends on how you have designed your dimension and it's attributes. Is it configured type 1 (overwrite the former record on change), 2 (new record on change) or 3 (keep the old value in a separate change column)?

  Anyway - I think that for all types of above dimension, the default behavior is not to delete the old dimension records. In general, it is reasonable since in Datawarehouse you typically add more data (you keep the history). When you say "Refresh" the datawarehouse - usually means adding new recent data (do not purge history).
  Something interesting here, that is why you want to purge old dimension records: violent keep consistency in your data model, if it breaks some features? Or you keep more small dimension for query performance reasons?

  It is true however that OWB lack such feature to automatically recognize this kind of change as "disappeared from source folder". And that change is sometimes important and must be reflected. In my practice, I used different approaches to deal with this - for example:
  * Add all missing documents on the left side of the mapping with a gauge field EXISTS_IN_SOURCE = 'n' artificially. In this way - OWB processes the records and marks in the target size as «not active more»
  * You can manually (we write some PL/SQL) to process the dimension after loading in OWB (by using step after mapping or some extra in your workflow). It's up to you how you process to remove lines here (you can mark them as EXISTS_IN_SOURCE = 'n', you can update their expiry timestamp, or you can serve them).

  Situation with cubes is similar - if you really need a purge of the old data: you must especially take care to implement.

  Kind regards
  JAVOR

• during an update lots of my profile folder has been put in a folder on the desktop marked the old data. How to restore this data file

  During a bet to update, automatic update of windows has started and some how much my profile data has been removed and stored in a file on the desktop. There is a simple and easy way to restore this folder from the current firefox?

  You can use the contents of the Old Firefox Data folder to "roll back" the refresh, but this involves several steps. It's probably even faster than the recovery of individual files and load those into your new profile.

  Check in the folder 'Old data Firefox' update adds a folder with a random semi name on your desktop. If there is only one, that probably has your old settings and Add-ons. If there is more than one, you'll want to work with one who has been updated recently.

  Once you have identified the profile folder, that you want to restore, here is my "old profile resurrection suggested procedure:

  Overview

  Here are the steps described in more detail below:

  1. Create a new Firefox profile
  2. Delete all of this profile folder
  3. Copy in all of the old profile folder

  Create a new profile for Firefox (Windows)

  Exit Firefox completely and start up in the Profile Manager by pasting the following in the Windows search, or the Run dialog box by pressing ENTER:

  firefox.exe -P
  

  Note: any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile, give it a name like OldSettings and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

  Open the new profile folder in Windows Explorer

  Firefox in the new profile should look like a new installation of the plant. Open the troubleshooting information page by using either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table, click on the view file"" button. Firefox will launch your new profile folder in Windows Explorer.

  This folder open, switch back to Firefox and get out by using either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Firefox is closed, the profile folder must be front and Center, or you can activate it by using the taskbar.

  Copy old data instead of new

  In this new profile folder you just popped open - NOT the one on your desktop - select all content (you can use Ctrl + a) and delete (you can press Delete on the keyboard).

  Leave this window open, open or switch to your folder of old data of Firefox. Consult your old profile folder. At this level, you should see a folder named bookmarkbackups among other things.

  Select all (Ctrl + a) and copy (or right-click > copy or Ctrl + c).

  Switch to the empty profile folder in another window and paste (or right-click > paste or Ctrl + v). This may take a few minutes because some files are large.

  Launch Firefox

  Firefox should start in this 'new' profile with the old resurrected profile data. Success?

• Firefox asked a "refresh", computer locked up before finished, created a "old data FireFox file on the desktop.

  Firefox asked a 'refresh', I pressed the button refresh and process running, computer then locked up to complete before. He has created a "old data file FireFox" on the desktop. I need to understand how trasfer the data in the old file of data in my FureFox 'new' to allow me to access my bookmarks and other. Thank you!

  Hi Ken, Firefox will not start now, complaining that it cannot find its profile, or it starts up, but data are incomplete?

  Here is a procedure to return to your prior to refresh the data. It takes 5 minutes, but it's probably faster than the recovery of individual data files and those in a new profile from loading.

  Check inside the folder 'Old data Firefox' update adds on your desktop in a folder with a name random semi. If there is only one, that probably has your old settings and Add-ons. If there is more than one, you'll want to work with one who has been updated recently.

  Once you have identified the profile folder, that you want to restore, here is my "old profile resurrection suggested procedure:

  Overview

  Here are the steps described in more detail below:

  1. Create a new Firefox profile
  2. Delete all of this profile folder
  3. Copy in all of the old profile folder

  Create a new profile for Firefox (Windows)

  Out of Firefox and start in the Profile Manager by pasting the following text in the search box of the start menu, or the start > Run dialog box and pressing ENTER:

  firefox.exe -P
  

  Note: any time want to switch profiles, exit Firefox and return to this dialog box.

  Click on the button create a profile, give it a name like OldSettings and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

  Open the new profile folder in Windows Explorer

  Firefox in the new profile should look like a new installation of the plant. Open the troubleshooting information page by using either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • Menu help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table, click on the view file"" button. Firefox will launch your new profile folder in Windows Explorer.

  This folder open, switch back to Firefox and get out by using either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Firefox is closed, the profile folder must be front and Center, or you can activate it by using the taskbar.

  Copy old data instead of new

  In this new profile folder you just popped open - NOT the one on your desktop - select all content (you can use Ctrl + a) and delete (you can press Delete on the keyboard).

  Leave this window open, open or switch to your folder of old data of Firefox. Consult your old profile folder. At this level, you should see a folder named bookmarkbackups among other things.

  Select all (Ctrl + a) and copy (or right-click > copy or Ctrl + c).

  Switch to the empty profile folder in another window and paste (or right-click > paste or Ctrl + v). This may take a few minutes because some files are large.

  Launch Firefox

  Firefox should start in this 'new' profile with the old resurrected profile data. Success?