Recovery HD displayed as Boot EFI to start (option)

Similar Questions

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• Cannot display some items on the start menu

  When I opened my laptop, go to the internet, then open the start menu, this alert rises; Unable to display some items in the start menu...

  What can I do? What the menu items start? This can be corrected?

  Thanks for the help

  Tim

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps mentioned below and see if the problem persists.

  a: right click on the Start button, then click on Properties.

  b: now click on the Start Menu tab and click the Customize button.

  c: Now in the option which reads, number of programs to display the value less than 5 , then click on ok.

  Hope this information helps.

• Creation of recovery disks when Windows 7 does not start

  My sister's hard drive is in imminent failure on HP G60-535DX laptop. Windows 7 does not start. I need to make recovery disks. I was able to save info goes into System Recovery Manager, but I don't see an option to create recovery disks to install the system on a replacement hard drive. Is it possible to create diskettes or order?

  Thank you

  Nanila51

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Error message: no Start Page cannot display this Web Site no Start Page has been configured.

  Hello.

  I work with my client technology company to point their domain on the newly published site hosted on Adobe Business Catalyst. They get the following message when they try to point the domain to ABC...

  "No Start Page cannot display this Web Site no Start Page has been configured. To configure a default start page, set one of your Web Pages to the Start Page. Please contact your administrator for more information. »

  This who should I tell them to do. Thank you.

  In the admin of the web site, change the page to the default page and set as start page.

  

• Dell: inspiron 1525 not boot from a USB stick, USB key are not not in the start option.

  Hi all

  I bought this dell laptop inspiron 1525 in the year 2008 with mentioned configuration:

  Core 2 duo processor

  1 GB OF RAM

  Due to some problems in my windows vista, I decided to install a new windows vista in my laptop. I run the dell support live cd at the start of my laptop and created the partitions on my system. But while the new installation OS on the cd i found that optical drive of my system does not work very well. so, I decided to install the new OS of USB. I went to the BIOS and selected the USB key in the boot sequence. but when I tried to install the new OS while pressing the F12 key, USB key is not listed in the start option.

  could someone help me to install the new OS in my machine? It is very urgent that my machine is down for 1 week.

  Please try attached BIOS changes screenshot than everything be useful to me.

  Thank you

  Gurpreet

  Hi Gurpreet,

  Thank you for your response.

  My apologies if I seem repetitive, but when you go to the Option of boot sequence in the system configuration screen, do you think that the USB storage device listed? And do you see a number in front of it?

  Go to the option for embedded devices and check if the USB ports are enabled or disabled. If disabled, change the option and enable the USB Ports.

  If this step does not help, go to the Maintenance option in the system configuration screen and press enter on 'Load Defaults'. On the side right, highlight 'Continue' in green, press Enter and then save & exit.

  Please keep us informed of the results.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.

• When I open FF I get 6 tabs open my homepage twice, FF starts Options page, manage synchronization and sign

  When I open FF I get 6 tabs open my homepage twice, FF starts Options page, manage synchronization and sign

  Check that you have not set multiple home pages.

  You can find the homepage here:

  • Tools > Options > general > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Firefox supports several home pages separated by ' |' symbol (pipe).

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• My "file, editing, display, history, Favorites, tools and help" options are hidden, I do not know how to make them visible.

  My "file, editing, display, history, Favorites, tools and help" options are hidden, I do not know how to make them visible.

  This has happened

  Just once or twice

  == My father-in-law messed with settings and downloaded a toolbar.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• not displayed in the Control Panel folder options

  I want to display hidden files, but the "folder options" icon is not displayed in the Panel, is not available under 'Tools' in the folder.  All the answers as to why?

  This can be caused by malicious software.  You should download, install, update and scan with both free scanners:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  You may be able to repair the damage by performing the part of the file, line 129, left reg here: http://www.kellys-korner-xp.com/xp_tweaks.htm read the instructions at the top of the page.

• How to move the "blue bar" with the start option and the clock and icons of a vertical__position on the left side of the screen to the bottom of the screen... has this before happen__once, can't remember what to do.

  How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen.  It's happened before and I forgot how to move.

  Hello pookprec

  Here's how to do it

  .

• My contacts are not displayed in her select a recipient option when creating a new email. They appear in my contacts.

  My contacts are not displayed in her select a recipient option when creating a new email. They appear in my contacts.

  I didn't know I was so vague with my information. However I understand it. I continued to try to export contacts from a previous e-mail program to a .csv file and few would go. I went back in my contacts Windows Mail, click on properties and noticed that the contacts had somehow hidden checked. I have then all selected and not the box and now they appear in the Select Recipient window.

  Thanks for responding

• When I try to load the system win xp home edition recovery disk, I get ' boot from ATAPI cd-rom: no image of starting emulation detected on lba0x00000015. How to cross this error?

  My computer is a "hp pavilion xt958.

  Hello
   
   
   
  Given that the problem is caused by using a recovery disk, I recommend you contact the manufacturer of the computer on this issue.
  http://welcome.HP.com/country/us/en/support.html
   
   
  I hope this helps.

• "Missing operating system" is displayed when you try to start Windows 10

  I have been using bootcamp to access the 10 Windows for quite awhile. It was working perfectly until a member of the family installed a Windows Update, but the battery is dead during the update. Following this window would charge any. A black screen with a blinking cursor. After that, I went back on fairing and wrong used the partition synchronization tool. Now, Windows is in a worse state and the "Missing operating system" message when you try to get back in. In addition, the Mac startup disk no longer allows me to reboot the laptop using the bootcamp partition, as if the partition is not more detected. Disk utility simply shows a greyed out "Disk0s4."

  I spent a lot of time looking for a solution, but without success. Here are some of the things I've tried so far:

  I don't know if its of any importance but sudo fdisk e/dev/disk0 the following message is displayed:

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-174722176] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [175131816-1269536]

  * 4: 0 b 1023 254 63-1023 254 63 [244256768-244140032] Win95 FAT-32

  The partition Inspector displays this:

  Report for internal hard drive *.

  Current GPT partition table:

  # Start end LBA LBA Type

  1 40 409639 system EFI (FAT)

  2 409640 175131815 mac OS X HFS +.

  3 175131816 176401351 Mac OS X startup

  4 244256768 488396799 database

  Current MBR partition table:

  # A Type starting ending LBA LBA

  1 1 409639 ee EFI protection

  2 409640 175131815 af Mac OS X HFS +.

  3 175131816 176401351 ab Mac OS X startup

  4 * 244256768 488396799 0 b FAT32 (CHS)

  MBR content:

  Bootcode: unknown, but bootable

  LBA 40 partition:

  Startup code: no (Non-system disk message)

  File system: FAT32

  Filed under GPT partition 1, type system EFI (FAT)

  LBA 409640 partition:

  Startup code: no

  File system: HFS extended (HFS +)

  Filed under GPT partition 2, type Mac OS X HFS +.

  Classified in the MBR partition 2, type af Mac OS X HFS +.

  LBA 175131816 partition:

  Startup code: no

  File system: HFS extended (HFS +)

  Filed under GPT partition 3, type Mac OS X startup

  Classified in the MBR partition 3, type ab Mac OS X startup

  LBA 244256768 partition:

  Startup code: no

  File system: unknown

  Filed under GPT partition 4, type database

  Classified in the MBR partition 4, type 0 b FAT32 (CHS), active

  I also tried to use Windows, but without success startup repair.

  If there is no solution to this problem, all least, hope to be able to back up everything that was on the Windows partition.

  Thank you very much

  What is the year/model of your Mac? Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  This will show the first block of the Disk0s4.

• Recovery of Windows Vista BOOT MGR is missing

  HP Windows Vista loading SP and began a loop at 3 on 3. Now it says boot mgr is missing. I don't have a disk recovery or start. I use my newer computer with windows 8.1. How to make a floppy disk recovery or the HP windows Vista Starter? any suggestion would be appreciated.

  Discussions were merged.

  Duplicate is not removed as more information provided by OP.

  Hello

  You cannot repair Vista with Windows 8/8.1 except it can be used to download and create
  Disks of Vista.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  This is the troubleshooting methods to try to resolve the problem:

  BOOTMGR is missing Press Ctrl + Alt + Delete to reboot the error message when you start Windows
  http://support.Microsoft.com/kb/2622803

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  This tells you how to access the System Recovery Options and/or use a Vista disc
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try the startup of the Options or Vista recovery disc repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Repair the Windows Vista boot loader
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information.
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">