Recovery of code 332 new data

The computer is Vaio VPCCW__GX. Diagnosis of RAM does, no memory error.

Hello

332 error is related with the hard drive. See the following link:

http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1000995

To start the service of Sony contact service team:

http://eSupport.Sony.com/us/p/service.pl

If my post answered your question, please mark it as an "accepted Solution".

Tags: Sony Computers

Similar Questions

Want the old data of Firefox, old PC died, new recovery keys will remove old data on server.

I created Sync on my hard drive now unusable, with all my goodies of Firefox on it. I am now on another hard drive but when I try to set up the synchronization and recover my old data, he said that I need a recovery key. I can't get a so it generates one, but a new will apparently remove the old data that I want to do unnecessary synchronization. How to access my old data without a key?

I was and am now running Firefox 28.0 on two hard drives.

Hello, it is not possible to recover your old data sync without the recovery key, because the data is stored encrypted on mozilla sync servers and it's the only key to decrypt. If you have already generated a new recovery key and then also data on the servers was overwritten - so I'm afraid that this data is lost for good...

How to add new data and delete old data from a custom text file?

Hi guys!

Well, I'm in a bit of trouble.

I need to make a request to some GPS tools. Split data in indicators, generate coordinates (google maps format), and so it goes.

One of the functions of the systems is the calculation of oscillation of coordinates. The formula should be: latitude 1 - latitude 2 = latitude AND longitude 1 - 2 = swing longitude longitude oscillation.

Since I'm on two values, I thought: "Oh, if I connect these data in a file, I just pick up and do all the calculations part." Yes, this idea is adapted to my needs (even if it is not the best, the computer part solved my problem).

BUT I don't see a way to write the current value of the loop and erase the old results.

For example, suppose that loop 1 gave me 1.00000, 2,00000 coordinates and loop 2 gave me the coordinates 3.00000 and 4.00000. Right?

My log file is similar to: 1.00000,2.00000; 3.00000,4.00000;

Well, it works. However, we will look forward to loop 3: coordinates 5.00000,6.00000.

If the program connects to it, I would get the chain: 1.00000,2.00000; 5.00000,6.00000; When I really need 3.00000,4.00000; 5.00000,6.00000;.

For this reason, when I apply the calculation of oscillation, it will always take the most recent value and do all the calculations with the first result (from loop 1).

Well, I wonder that there is a way to add new data to a file and replace the old values, with simple code. If anyone knows how, please respond here!

Considerations:

(1) I want to do it as simple as possible. My code is kind of great, and it is not appropriate to insert structures or library now.

(2) maybe the explanation is not as simple as it is for me. Really, I couldn't find a better way to say what I need.

(3) if someone has doubts as to my doubts, please just comment and I'll try to be as specific as possible.

Thanks in advance!

I guess my question is why write a file just to delete.

If you pass an array of points from one iteration to another, you will have to take extra time to open the file, read the file, delete the old data, writing the new data, save the file, and then close the file. It would be pretty much the same thing, but without having to go through the hard drive.

Just a thought.

Using 'New data value reference' in a loop

Hi all

I just read on the data value references (DVR?) and I'm trying to use them with overall functional (see table).

I don't think that I'm just doing. The final goal is a producer/consumer nickname. My concern is that I don't feel the implementation of the new primitive data value reference and re-stuffing the result in the FGV, should occur in each loop.

Of course I could "spread" data with a single gueue element (where the queue of new data would take place each loop). I just thought that I would play with them.

Beavercreek wrote:

I think that we defend the same point, but I can't seem to understand why this does not work the way I expected. I discovered the DVR (and queues) as a pointer, simply a way that the other vi can know where the data is located. The data that we are after is here. So, why Ch1 does not work in the data_reader.vi?

If we can get Ch1 to work data_reader without re-creating and re-writing of the reference in the FGV each pole (what does Ch2), we find no more what is wrong with my vI or I'm going to learn something that is still beyond me. I hope to hit me in the head this afternoon still

You are missing a fundamental idea: the function you call creates a reference that points to a specific value. To actually interact with this value (read/write), you need to use the structure of the International preliminary examination. At this time what you are creating a single reference for ch1 (which do you nothing with) and creation of multiple references to ch2 (where at each iteration that you replace the reference in the FGV, so you basically lose the old reference), so instead of having two DVRs, you really N + 1 DVR (where N is the number of iterations of the loop runs).

For your code works the way you want, you only need to create two digital video recorders (probably before the loop), then bring them inside the loop and use the structure of the International preliminary examination with nodes in R/W DVR to set the value in the DVR.

For example:

Other problems with the code, but this deal the DVR issue.

[Explanation necessary] Clears the listview data and fill it again with new data

Hello

I correctly filled a listview in c ++, data analysed and does interesting things with it. However, I am drunk stumbling, unable to find a way delete and repopulate my display of the list...

Question 1:

How can after I insert data in the list view, I clear the list data and run again the same method (init) who populated the list view with the data in the first place?

Here are the docs that I referenced and I don't understand how to implement the methods in my code.

QList - clear() method

https://developer.BlackBerry.com/Cascades/reference/QList.html#clear

Using the data access Code, example
data_access/using_data_source

GroupDataModel - Clear()

https://developer.BlackBerry.com/Cascades/reference/bb__cascades__groupdatamodel.html#clear

CODE

Here is my code - filling of the display of the list of C++ and display of data in a ListView.

MyApp.cpp

MyApp::MyApp(bb::cascades::Application *app)
: QObject(app){
    // create scene document from main.qml asset
        // set parent to created document to ensure it exists for the whole application lifetime
        QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);

            AbstractPane *root = qml->createRootObject();
            qml->setContextProperty("yoyo",this);
            //grab references
            list_view = root->findChild("listView");

            // set created root object as a scene
            app->setScene(root);

            mNetworkAccessManager = new QNetworkAccessManager(this);
            bool result = connect(mNetworkAccessManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(requestFinished(QNetworkReply*)));

             Q_ASSERT(result);
             Q_UNUSED(result);                 json = new QFile("data/file.json");
}

void MyApp::init(){
    QNetworkRequest request = QNetworkRequest();
     // i call some service here
     mNetworkAccessManager->get(request);
}

void MyApp::requestFinished(QNetworkReply *reply){
    qDebug() << reply->error();
    qDebug() << reply->errorString();
    if (reply->error() == QNetworkReply::NoError) {
        qDebug() << "No error";

                QByteArray data = reply->readAll();

                if (!json->open(QIODevice::ReadWrite)) {
                    qDebug() << "Failed to open file";
                    return;
                }
                json->write(data);

        bb::data::JsonDataAccess jda;
        QVariantMap results = jda.loadFromBuffer(data).toMap();
                QVariantList lst = jda.loadFromBuffer(data).toList();
            GroupDataModel *m = new GroupDataModel();
                   m->insertList(lst);
                   m->setGrouping(ItemGrouping::None);
                   if(list_view) list_view->setDataModel(m);

    }else{
        showDialog("Boo",reply->errorString());
    }
}

MyApp.hpp

// Tabbed pane project template
#ifndef MyApp_HPP_
#define MyApp_HPP_

#include 
#include 
#include 
#include 
#include 
#include 

namespace bb {
namespace cascades {
class Application;
}
}
namespace bb {
namespace data {
class Application;
}
}

/*!
 * @brief Application pane object
 *
 *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
 */
class MyApp: public QObject {
Q_OBJECT
public:
    MyApp(bb::cascades::Application *app);
    virtual ~MyApp() {
    }
    Q_INVOKABLE
    void init();
private slots:
    void requestFinished(QNetworkReply *reply);
private:
    QNetworkAccessManager *mNetworkAccessManager;
    QNetworkRequest *request;
    QFile *json;
    bb::cascades::ListView *list_view;
};

#endif /* MyApp_HPP_ */

hand. QML

import bb.cascades 1.0

Page{
Container {
                        background: Color.White
                        ListView {
                            id: listView
                            preferredHeight: maxHeight
                            objectName: "listView"
                            listItemComponents: [
                                ListItemComponent {
                                    type: "item"
                                    Container {
                                        Container {
                                            Label {
                                                text: ListItemData.id
                                            }
                                        }

                                    }
                                }
                            ]
                            onTriggered: {
                                console.log("selected_index: " + indexPath)
                            }
                            horizontalAlignment: HorizontalAlignment.Center
                            verticalAlignment: VerticalAlignment.Center
                        }

}
}

Question 2:

How reference to the ListView object with the name "listView" in different parts of the MyApp.cpp file? Is there anything else I should add to the header file to make the accessible listView?

Question 3:

What happens when you call the clear() method? How the data model is affected? How the user interface is affected? What happens in memory?

Question 4:

How do you verify that the data in the list has been deleted so that you can go ahead and fills again with new data? What is the cheque that I perform?

I would also like to know how you manage multiple views of lists and data sources in your applications. Best practices or ideas?

Thank you

I was able to clear the listview with the following code, if anyone is interested.

listView.dataModel = null

The dataModel must be set to "null".

Help finishing, new Date .valueOf () ();

I searched a lot on the internet yesterday to nothing does not. I created a form and have a field of text called "InvoiceNumber". I wanted a script that would create an invoice number and was found - new Date () .valueOf ();. That's exactly what I was looking for because I used something similar in Livecycle but I don't know how to put this script in the form, so it generates the number in my text field when the form is opened.
I found where you click on "pages" in the sidebar, right click on the form page, click page properties, take action and then set up a script of the opened page. I guess that is where I would put the script above, but if this is the case how can I tell the script to have the number generated in the field "InvoiceNumber"? Any help would be greatly appreciated.

this.getField("InvoiceNumber").value = new Date .valueOf () ();

However, I do not recommend using the action of the page, because who would have executed every time the page is opened (for example, if you navigate to another page and then come back). A better option is to place the code as a script at the level of the doc, by going to tools - JavaScript - Document JavaScripts and place it (NOT inside a function).

Need help with the code to add dates to form

Hello fans forum
I am new to make forms and understood how to auto add the date, but I need the shape to change the date for each copy made.
For example, is today 08/06/2012 if I print 10 copies of the form it will display 10 pages from 08/06/2012 to 17/06/2012. If the code exists for this I would be very gratefull to one who helps, I also wouldn't mind if this is not possible for manually inputing start / end dates.
Currently I have print 15-30 copies of the form and hand write each of the dates but I get just to busy to do it. Also I can't print one a day, it must be in batches.
Thanks in advance.

I think that you misunderstood my comment about the Console window. Please see the Console window tutorial link in my previous answer. The Acrobat JavaScript Console window is internal to Acrobat, so there is no system restrictions that may prevent you from using it. It's a perfect place to run short automation scripts that do things like print separate copies.

George also underscores a great solution, put the script in a (non-printable) button on the document itself. However, due to security restrictions this solution can be a bit tricky, but no more so than using the Console window. Each solution takes a little extra effort.

The problem with having multiple pages, it's that you must manually create a document with pages already in it. It is certainly a feasible solution, it comes you limit the number of pages that you have already created manually. At least one solution AcroForm. If you re-create your form as a dynamic LiveCycle, then creating new pages on the fly is not a problem.

None of these solutions will work fine, the real trick is to increment the date.

Here's a short script that begins with today's date and adds a day for each iteration of the loop and then prints

One day in milliseconds

var nOneDay = 24 * 60 * 60 * 1000;

var nToday = (new Date()) .getTime ();

for (var i = 0; i)<>

{

oTheDate = new Date (nToday + i * nOneDay);

Date format

cTheDate = util.printd("mm/dd/yyyy",oTheDate);

this.getField("MyDate").value = cTheDate;

This.Print)

}

This same loop could be used to fill in a form on the page - multi (repeated) fields.

Using the util.scand () function, this loop could be setup to start at an arbitrary date.

See you soon,.

With the new Date on Linux is different from windows/mac?

Hello
Im getting two different results when you use date when you are using windows / linux
The release of windows must be Wed Jul 1 16:15:12 GMT+ 0100 2009
When I run this code on linux I get Wed Jul 1 16:15:12 GMT-0400 2009
Does anyone know why this is and how I can fix it is the same as that of windows?
Example working as below...
http://www.aidanmack.co.UK/Flex/test/test.html
CODE BELOW,
Thanks for any help.
See you soon
Aidan
<? XML version = "1.0" encoding = "utf-8"? >
" < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML " " layout = "absolute" init = "figureTimeDif ('01-07-2009 16:15:12 ');" > "
< mx:Script >
<! [CDATA]
[Bindable] public var betplacedtimedate:Date
public void figureTimeDif(betsliptaken:String):void {}
var thedate:String = betsliptaken;
var dateBit:String = thedate.split("") [0]
var timeBit:String = thedate.split("") [1]
var dateBits:Array = dateBit.split("-");
var timeBits:Array = timeBit.split(":");
betplacedtimedate = new Date (dateBits [0] dateBits [1-1, dateBits [2], timeBits [0], timeBits [1] timeBits [2]])
}
[]] >
< / mx:Script >
< mx:VBox >
<mx:Text htmlText="==============================================================================" />
< mx:Text htmlText = "{betplacedtimedate}" / >
< / mx:VBox >
< / mx:Application >

Flex uses the time zone of your system information to calculate its dates.

zones / areas do you have two machines, the value, I think they will be different.

When Firefox restarts the pages that they do not charge just display story, I then have to refresh to get new data as Explorer always charging and Firefox used to

This should be an easy solution, because all the other browsers and Firefox used to do this. Firefox is restarted the pages do not charge they just historical display. I have to hit the button reload current page to get new data. This has been driving me crazy for a few weeks. I thought I had fixed a couple of times but only a few pages loaded and now it's the whole story again.

Joe

Oh, you use the Session Manager. What happens if you check the box in the Session Manager options, to the title of the backup & restore, "Reload All restored Windows"?

Update deleted 9.3 health data, more prevents the collection of new data

I have updated to 9.3 instantly for my 6 s the first day. The health app immediately removed all the measurements taken nearby, and flights climbed data.

I thought it was an unfortunate decision to reset the data with the update and that he met now new data in the future. This is not the case. Health app refuses to collect new data for markets, distance, or flights is mounted. These are the only items I placed in my dashboard.

I restarted the phone, I held the sleep and home button to reset the phone, I force restarted the application. I took the items on the dashboard, rebooted, and then put back them in the dashboard. Nothing has changed, health app is not always follow these data more.

I have a Apple Watch matched, disconnection of the Watch has not changed health tracking app data.

Today, I noticed another problem. Data on health won't save "Me" info. Birthday, sex, blood, nothing. I enter and I entered the data are erased as soon as I look elsewhere and return to check.

All of the following to try ideas?

Other patches attempts: Genius Bar said reset all settings would do the trick. There can be no.

This evening I restored the iPhones be 6 s and set up as a new phone and then reinstalled every app I had before, more reconfigured all my settings as before (recreated the Touch ID, readded Apple pay credit card, re each alarm password for all applications that need them). HE FIXED. Took hours if.

Recovery disk is deletes the data at the 2nd disk on Satellite A300?

Hello
I use a laptop Toshiba A300, which has 2 hard drives (250GB). The laptop has Windows Vista Home Edition 32-bit installed, but I want to change for Windows Vista 64-bit, which comes with the recovery disk, in order to use all 4 GB of RAM.

I have all the backup data and move them to the 2nd HARD drive (D, C named first name).

So I wonder if Recovery Wizard will delete the data of the two hard disks or just a 1st.

Thanks in advance
Kevin

Hello

Your laptop was equipped with HARD drive recovery option allows you to create the own Toshiba Recovery disk which would be contains the preinstalled operating system.
In your case the Vista 32 bit.

And Yes, install from the recovery disk format the whole HARD drive and removes all the disk, also of the second partition.

That's why to create the recovery disk before you install or change anything on the HARD drive

It is better to define a waveform properties of scale before or after sending new data to the chart?

Hi, I wonder what is the best time to update the properties of the graphic scale waveform.

I'm sampling data every 15 minutes for 192 samples, or 48 hours. I want to draw these samples with x in absolute scale so the scale maximum x is time and x minimum scale at the time mode is x max in less than 48 hours (172800 seconds). I want also to intermediate-scale markers 6 hours apart and to be multiples of 6 hours. for example at 06:00, 12:00, 18:00. It works by using nodes of property but sometimes intermediate markers are on the hour 6 multiple and sometimes they are at 6 hours after the scale min marker. for example, 09:15, 15:15, 21:15. Is there a way to ensure that the intermediate markers are on the hour 6 multiples?

Thank you

Neville

Neville,

I don't think there is a function of the order of execution by using nodes of property information across your graph. If you are concerned about the speed of your VI, I would recommend writing to the property node before update you the chart. I believe that this will ensure that the chart will update only once: when the new data is sent to the curve, as opposed to the update with the new data, then with the new scale.

Insert new data to a new line in the same Excel sheet in continuous

Hello world

I'm using LabVIEW 2010 and there is a problem, I need to ask the subject to export the LabView to Excel data. Basically, I could transfer data "once" once on a new or selected Excel worksheet, but can only be 'IMMEDIATELY' when I run the VI, so my problem is, I need the data to be inserted at a same Excel sheet whenever I press run and the new data will replace not the former, instead go to the next new row or column. I really need answers regarding my problems, suggestions and ideas are welcome.

I have attached my current VI and a picture describe the outcome that I needed

Thank you for answer

I just downloaded a version of EVALUATION of MapPoint 2013 demographic details resemble MapPoint 2007... the trial version not have the new data from the 2010 Census?

I just downloaded a version of EVALUATION of MapPoint 2013 demographic details resemble MapPoint 2007... the trial version not have the new data from the 2010 Census?

Hello

The question you have posted is related to Microsoft MapPoint and would be best suited to:

Technical support of Microsoft MapPoint

http://www.Microsoft.com/MapPoint/en-us/support.aspx

Support for MapPoint, streets & trips and Highway

http://support.Microsoft.com/ph/851

The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!

Can someone bring me (Labview is new to me) in the right direction?

John

See attached the amendment. I made a change to my suggestions and possess the top-level VI for the null refnum. See if it makes sense.

Recovery of code 332 new data

Similar Questions

Maybe you are looking for