Recovery plan test failed - a file is not found error

Similar Questions

• "The file is not found" error message when you try to view recent items list for word and excel files

  Title files: original vista on the recent items list does not open

  When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there.  This happens with word and excel files but not the adobe pdf files.

  Hi GillianMO,

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.

  Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1

• OPM get a "this file is not found error" but the document opens without plugin

  I'm under 64-bit Windows 7, Word 2010, OP 10.4.4.21.

  The scenario is strange.  Everything has been fine until today.  Something has changed, and now I am unable to open all the OPM Word documents (or compile compile all).  When I try, the error message ' Oracle Policy Modeling could not open document, such that an error has occurred in Microsoft Word: this file was not found ".". "  The document opens, however, but the plugin is not displayed.  I tried to reinstall OPM several times without success.  Indeed, during install it first a couple I'd always get the error message, but CERTAIN documents open with the active plugin and I could compile in the document - and some wouldn't have the plugin.  After another reinstall, OPM still throws the error, and documents open always in the background, but without the plugin active or exposed.

  I also tried to Repair Word, but do not want to reinstall office.   Excel seems to work very well.  I don't really know what was the triggering event.  The project has been using subversion when he arrived, but now all the projects on my machine, subversion or not, are concerned.  I think it's just my machine and others do not see this problem.

  Has anyone seen this?  Something corrupt?  It's almost like the word invocation simply does not work properly.

  Help!

  Thank you very much.

  OH - I found and fixed it.  Word has disabled the "Add-in".

  1. Click the File tab, click options.  A popup options will appear and then click Add-Ins.
  2. In the box macros complementary , if you see that policy modeling Word 2010 Template.dotm is disabled, you will need to enable it.  Downstairs, choose from the menu drop-down handle and click on the button 'Go '.
  3. Select the type of "Disabled" in the Management area, and then click OK.
  4. Select the item to activate, and then click the button 'Activate'.

  
  

  It was something that should have been easy.  We have a couple of experts of the Oracle takeover bid on the site and they didn't, and R & D in Australia has yet to respond to us.
  

• WIndows XP "Printer Spooler file was not found" error messages

  original title: I get an error message 2, indicating that the printer spooler file is not? Please help me

  I went into Control Panel, printer spool automatic setting it up he said stop I try to click on start and then it gives me error message. We have always used this printer with this computer, the only thing we did different is disconnect? I have tried different things Ive uninstalled the software, it won't let me reinstall and if I click on add a printer it is empty and won't let me add it...  I would appreciate any help thanks

  Hello

  Can you confirm if spoolsv.exe is located in C:\windows\system32... If this is not the case, try to recover the file "C:\WINDOWS\ServicePackFiles\i386".  I assume that your say is installed in C:\windows.

  Let us know if it works...

• I get the message that running ' Ckdsk/f' the file is not found. I can't defragment drive c.

  I can't dfragment c drive. I get the message run Ckdsk/f. The file is not found.

  the command is CHKDSK /F.

  However, it is best to run this instead: CHKDSK /R

  It is unclear if you do not run the check disk drive correctly or if the check disk command / file is affected by the volatile file system.

  my suggestion is to acquire a xp boot cd and boot the recovery console.

  then when you get to the disk prompt run the command >: CHKDSK /R

  then type exit, remove the cd and boot into windows.

• Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

  I recently bought Age of Empires 3 and tried to install it.  I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed.  I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode.  Any suggestions?

  Hi void 1337,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also follow the link and check if it solves the problem:

   

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  You can also view the article mentioned below to learn more:

  Microsoft games: InstallShield Error Messages

  http://support.Microsoft.com/kb/910816

  If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

  http://Forum.AgeCommunity.com/

   

  Let us know if that helps.

• Application not found error-choose the program you want to use to open this file

  Soon all the world.

  I really hope that someone will post a reply to my question as soon as possible. I will try to be as descriptive as I could possibly, in order to solve my problems.

  The main problem is that I can't open some, if all the program files, applications on my windows 7, 32-bit laptop. I'm constantnly get application not found error, showing in a small window address, I was trying to do. Whenever I want to open a program, like the Adobe reader, word of microsoft, excel, mozilla firefox, google chrome - basically everthing, a window opens and is telling me this: choose the program you want to use to open this file: file: acad.exe... and recommend me acrobat from adobe program, any program I was trying to enter (in this case autoCAD).

  Cannot open cmd, when I go to system recovery, it says: System Restore could not start. I normally post records in: C and: D sheet music, play music, watch videos and see photos. I found a "hole" not being able to go to the internet via a browser. I discovered it when I went to an online help in some of the trobleshoots. It would open tab in google chrome by itself and then on it, I can browse the internet normally, but only through the said track.

  Currently, the microsoft security essentials performs a custom analysis (: C and: D), because I suspect it is a malware, or some kind of virus. It happened when I tried to download a program from CAD Solidworks 2012 via a site that I'm not sure I'm allowed to mention, that I don't want. Unless it's okay with you :) It begins with a letter t. By the way, I noticed that my: partition D has accumulated 10 GB + more in the space of a few days, because I remember two weeks ago I had close to 70 GB of free space, now it's about 56.3 GB. Curious, because I know that I did nothing so great in this period. Maybe I need to tell you that I get this window, from time to time, when I browse the internet (I never visit suspicious sites, or at least I don't me remember more I visited one in a very long time, like 4-5 months):

  [url=http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002]http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002[/url]

  I found this in my story, be very careful what you do with this link, I don't want that take you anything ;)

  That's on my side, please ask anything and everything, I'll visit this page when I can.

  Good bye!

  P.S. forgot to mention that when I download a program (mozilla Firefox), I can not run it due to: Application not found. I hope I found the right place for it.

  Original title: Windows 7 - Application not found. A big problem or easy-peasy?

  Hello

  Thanks for posting your query in Microsoft Community.

  1. What is the complete error message you get when opening a file?
  2. What happens when you try to open the command prompt?
  3. What happens when you try to access the internet by using Internet Explorer?
  4. You did changes to the computer before the show?

  According to the description of problem errors you get "application not found error" and "choose the program you want to use to open this file" and not being is not able to do system restore, it seems that some windows file is corrupted. I also suggest you to post back the results of analysis.

  I would suggest trying the following methods and check if this is useful:

  Method 1:  Run SFC scan and check for corrupted Windows files and violations of integrity.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Method 2:

  For any question, where his prompting you to select the default program
  Try to set the default values for the program
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-in/Windows/change-default-programs#1TC=Windows-7

  For any question, where you are not able to download and install firefox, download the file and save it and then try to install firefox.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• "Could not apply the workspace because the file was not found."

  I've just upgraded to the latest version of Photoshop (CC 2015.5). Some of my photoshop files does not open and I get an error message: "could not apply the workspace because the file was not found."

  I have uninstalled/installed Photoshop CC 2015.5, I uninstalled and installed two previous versions of Photoshop, I reset my preferences, and I repaired disk permissions.

  None of them worked.

  What would it be?

  Hello

  Quick note giving clarification on the 2105.5.1 update: the error message that the OP has reported is inaccurate for the State. The update should simply fix the alert to note that it is impossible to open the file, instead of the misleading warning that a workspace cannot be applied.

  We did not all patches to open a file that fails intermittently. We have still not an understanding of root to the problem the OP has been run in.

  Kind regards

  Steve

• Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Try to reinstall Adobe Photoshop Extended CS5 Win - have downloaded the file, but when I double click on the .exe to install file, I get and which words "Installer could not initialize - file not found" error message can someone help me?

  Hi Rose

  Refer to the troubleshooting error messages | CS5, CS5.5 bootstrapper

  Installer [CS5.5] initialization failed. Please download Adobe Support Advisor to detect the problem.

  I hope this helps.

  Thank you

  Varun

• VIX API question vmrun said that a file was not found.

  I am trying to send commands directly to my guest Windows OS. The vmrun command will return with the information as if it were on the Windows command line?

  I get an error that the file is not found every time, even if the file exists.

  Thank you

  h

  1. vmrun-t esx h https://myhostname/SDK password u root Pei - gu runProgramInGuest administrator password - gp ' [configs] vmshe-vm-4-54/vmshe-vm-4-54.vmx ' C:\ipconfig

  Error: A file was not found

  1. vmrun-t esx h https://myhostname/SDK password u root Pei-gu

  RunProgramInGuest administrator - gp «[configs]» password

  Vmshe-VM-4-54/vmshe-VM-4-54.vmx C:\test.bat ".

  Error: A file was not found

  Like Lemke specified in coment #1, you cannot the stdio output your server/host where you run vmrun.

  If you want to get the output of the command "ipconfig", follow these instructions.

  1. create a script file. inside the guest.

  2. in the comments, open your favorite text editor and fill in the script.bat with the following content.

  ipconfig > C:\ip.txt

  3 using the vmrun, run the script.bat using the runprograminguest command. Now, ipconfig information will be pumped to the C:\ip.txt file in the comments. Using vmrun, copy this comment to the host file.

  Ex:

  vmrun.exe - gu guestadministrator gp - runprograminguest C:\path\windowsvm C:\script.bat password

  Provided that the above command to be successful,

  vmrun.exe - gu guestadministrator gp - password copyfilefromguesttohost C:\path\windowsvm C:\ip.txt/path/of/leader/we/host

  (I run the same commands on my box. It worked. If you experience problems, please update the bug)

  Now the new copied to host file will contain details of the prompt ipconfig.

  -Thank you

  Sevin.

• Unable to play the purchased songs iTunes - original file not found error?

  Unable to play the purchased songs iTunes - original file not found error?

  It just happened spontaneously in isolation or is there more background about what you did?

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.

• Why the beats start file is not found on my TouchSmart 320-1050?

  I have a 320-1050 Touchsmart from HP with Windows 7 64 bit operating system.  When I try to open the software of beats, I get an error message saying that the boot file is not found.  I have not made any changes to my computer and that you have not added new programs.

  Hello Shirley,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56045.exe

  One time finished, open windows control panel, open programs and features, locate the Audio IDT entry, right click and select uninstall.

  When this has completed, restart the computer.

  Let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• error-61499 to Compileinstructions.txt. File was not found.

  Description of the problem:

  I have a cRIO application that used a module NI 9401 DI, that I needed to change to use a cRIO or NOR-9411.  I added the module to 9104 chassis, modified the project to include the correct, deleted and added HW FPGA DIO VI in the application and went to compile...

  When I did, I got:

  error-61499 to Compileinstructions.txt. File was not found. Check

  Support SW installation target.

  Is that what sounds like my install Labview is watered upwards and my Xilinx compiler is missing or broken?  Let me know.  I am against a date limit to change this code.  I tried to re - install modules FPGA and re - compile, but when I try to open the FPGA VI to recompile LV hangs too.

  Things are degenerating fast here... I was really not looking forward to blowinga DAY reloading system ALL THE LV... since I KNOW what technical support is to tell me... I've seen that movie too many times.

  Any ideas are appreciated.

  JPR

  It clearly looks like a Setup error.  Make sure that you fix LabVIEW, LabVIEW FPGA, OR RIO, and other features that seem to be related.

• TestStand 4.2 string not found error in the language resource files

  I installed the TestStand 4.2 on two Windows XP computers.  On a machine it worked fine first time. On the other machine, I get the following message if poster in the login box and also in the component models: ' String not found in language resource files. "I tried uninstalling and reinstalling TestStand twice but you still get this error.  This error is preventing me from being able to log in as administrator, so I am unable to use TestStand 4.2. I understand that these language resource files are supplied by the installer, but for some reason, it seems that the machine with the error cannot locate these.

  The only difference between the two XP machines I can find is the location of user profiles.  I note that on versions of TestStand compatible Vista, that TestStand user settings are stored in C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\Components on XP machines.  On the XP machine with the error all the user profiles are stored in C:\profiles, instead of C:\Documents and Settings.  This is the standard profile used by our company so I am not able to change that. TestStand Setup recognizes this and install for C:\profliles\All Users\Documents\National Instruments\TestStand 4.2\ TestStand user parameters.  Does anyone know if the location of user profiles is important, or if there is another cause of this error?

  Kind regards

  David

  David-

  The cause of the channels being found is probably at the first launch of TS, the language files are not found. The language files contain default values, and these values are kept as actual values during the recording of the configuration files. For example, the default administrator name and the default folders in the Insert palette. I would recommend that you delete the file Users.ini and Templates.ini in the configuration directory and this should address your current behavior. I don't know why the connection appeared a problem because I was able to use the blank password on the user 'String not found in language resource files. If you still have problems with the connection, let us know.

  You remember something unique about how you came to this situation that caused this to happen?