Reference Dell V313w
I have the following problem with my Dell V313w printer, I got free with my Inspiron 14z about 16 months ago:-I can send any type of document for printing via USB or wireless, and it will print successfully. However, if I then try to print a second document, the process stops. The print head moves slightly, suggesting that some sort of 'signal' seems to have been received by the printer and the "status" indicator indicates that the document is in print - but nothing happens. When I then try to cancel the queue file it just crashes with the status indicator showing that the document is 'delete '. The only way to fix this is to turn off the printer and the laptop and restart both. The "stalled" document then print without be sent again and also I can print another document. However, if I try to print one-third, the process hangs once more. I tried also to reinstall the driver - twice - but to no effect. This post is my last attempt for a solution before the ditch printer and buy a replacement by another manufacturer. Someone at - he had the same experience and managed to solve the problem? Thank you very much.
Debouzze,
In the latest batch of updates to Windows, Microsoft has installed Internet Explorer 11. IE11 caused printer problems.
Open Internet Explorer, click on help, then click about words of Internet Explorer. It should show the version here. If you IE11, then go to control panel, Windows Update, updates installed, look for Internet Explorer 11. Click Internet Explorer 11, uninstall.
Restart the computer when you are prompted. Then see if your printer works.
Rick
Tags: Dell Peripherals
Similar Questions
-
Reference Dell V313w does not print
First of all I apologize if it is redundant. I spent countless hours scouring the web for answers and have not found anything to solve my problem. I looked in the forums as best as I can, but nothing helped. I'm having a problem with a Dell V313w while one that seems common, and yet I've seen no concrete answers for this problem. Basically what is happening, is that the printer seems not to get the message that there is a print job. It will print say once and then when I go to print another document he'll sometimes sounds like its going to print but only it noting. The document stuck in queue, and I have to restart the computer to clean. I did all the recommended steps, stop and start the coil manually, run the command to stop and re started the coil. I deleted all the anti virus, deleted and reinstalled the printer as a device and have updated the firmware from dell. Nothing seems to work. The copy function works fine so I know not peripheral t it will be printed. It is the communication of the computer to the printer. I have enabled all ports USB to continue to supply electricity and the problem occurs without the PC goes into hibernation mode. My PC is a Dell Inspiron 570 running on Windows 7 64 bit with an AMD Athlon II processor. Any help would be appreciated until I throw this printer into the wall. Thank you, Eric
Hello
I have exactly the same problem with my Dell v313w and Dell XPS 64-bit win7 computer.
Has anyone confirmed that the removal of the Explorer 11 is the solution to this problem?
My sister yesterday failed to get a boarding pass printed. She got the first page printed and then stumbled on this issue. It has restarted the computer, and then on printing the page, it would not print black ink even if there is black ink.
I have been using printers in my life and this model printer, quite frankly, is the worst model I had the misfortune to have had. I had like an hour with my laptop and intend to throw if I can't get this problem to be solved permanently.
Thanks in advance
-
Notice: part missing... directed to OCR on the printer CD, found the part. Must be an administrator to install, restarted in Administrator Mode. Try to install ask password for Windows, gave the password, it was wrong. Brain storm to change password, can't do that, need to change to new password old password. Where can I find the old password? Another question: at the moment all the analyses and printer made a partial closing down. The power light does not turn off, but nothing works. How to fix this? I uninstalled and reinstalled and the printer is set as default, as said to do.
Thank you for your help.
AHarris343,
Not knowing the brand and model of your computer and the operating system is not very useful.
You can try...
First run, delete print jobs to eliminate any print job stuck in the queue.
Unplug the printer.
Uninstall the printer, start, Control Panel, programs and features (Add/Remove Programs) Dell V313 printer, uninstall.
Restart your computer.
With online computer, insert the floppy disk to the printer and install the printer. Because the printer is already installed, you can select additional computer, and follow the instructions. This should install it the printer and OCR program.
Rick
-
Reference Dell V313w green light flashing of power
Howdy,
I left this printer House my father to mine, and when I plugged the power button began to blink green. It worked very well with him and I drove just two blocks away, so I don't think anything being pushed around around.
I have pressed the power button for a minute without change. I also unplugged the printer from the wall and disconnect the power to the printer. I waited a few minutes then reconnected power. I went through the manual and searched on the internet but came up with nothing useful. I tried to install the printer on my computer, but the installer think that the power is off to the printer.
Thank you for any help or advice. The green light flashes constantly tormenting me. :)
Hi Montanaw,
There is no reset for this printer pin hole button. To reset the printer, please follow the mentioned below as follows:
- Turn the printer off.
- Press on and press and hold the 'Start' and 'Cancel' button and then press the "Power" button to turn on the printer.
- The printer resets and starts the initial printer installation.
If the problem persists, the printer must be replaced.
-
Reference Dell 1700 crashed and I have no backup
Reference Dell 1700 crashed without backup whats a girl to do
lost all programs can run does not help
Reference Dell 1700 crashed without backup whats a girl to do
lost all programs can run does not help
Reinstall Wndows.
Reinstall all your programs from the original media or downloaded files you have saved on an external drive.
Reinstall all your data from the backups that you made on an external drive.
If you have not, you're out of luck.
-
Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD
Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.
Hello
1 have. what fixit you tried?
2. don't you make changes to the computer before the show?Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.
-
Original title: unable to print. Reference Dell 944 communication usb port is not available.
Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems. I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?
DavidNicholsonXN,
How to download and install drivers in the correct order
also try to read...
The owners of all-in-one printer Dell 944 thread (W7)
Let the printer after Kaspersky
Rick
-
Reference Dell pc with xp family. Restart to the logon screen
Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?
Peek into the registry to find clues.
Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information. Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.
1. right click on my computer and select Properties.
2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
3 clear the automatically restart box and OK your way out system properties.Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.
How to configure Windows XP to start in a "clean boot" State
John -
How can I clean print head? Dell V313w printer?
I have a Dell V313w printer. How to clean the print head nozzle. I go to the Panel of the printer, but I can't. Thank you
Hello
You asked your question in the Forum of Dell devices:
http://en.community.Dell.com/support-forums/peripherals/f/3528.aspx
Good luck
Donald Anadell
-
Reference Dell M1000e + aggregator MI/O port mapping
Hi all
I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?
My hardware:
- 1 x Dell M1000e
- 2 x M i/o aggregator (A1 & A2)
- 16 x M630 Blade (Qlogic 57840 S ANC four ports card)
Reference DELL M/o aggregator:
(reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)
I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.
Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)
Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)
FYI - I would like to install ESXi 6.0 on all blades
Thank you!!
Vinay
Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.
You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.
Unidentified:
Dell (conf) # tengigabit interface 0/16
Dell(conf-if-te-0/16) # vlan unidentified 4
Output Dell(conf-if-te-0/16) #.
Tag:
Dell (conf) # tengigabit interface 0/16
The tag vlan Dell(conf-if-te-0/16) # 4
Output Dell(conf-if-te-0/16) #.
Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.
By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.
The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.
For redundancy, you could stack the units together. 241 page details the process of stacking.
Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.
-
Reference DELL T420 - battery on PERC H710 adapter controller
Hello
I received a yellow warning
Reference DELL T420 'Battery on PERC H710 adapter controller'
What it means?
What should I do?
Order the new battery?
It is a simple replacement mission?
Is it essential?
Update:
test URL
http://www.Dell.com/support/article/us/en/04/SLN130018
Have nothing, everything seems fine now...
Thank you
It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.
-
Reference Dell 3110cn of Laserjet + os El Capitan
My MacBook Pro (2009) stopped my Dell printer. News on this please.
Hi deaconjo,
as I had the same problem, I found a solution for my El Capitan MacPro 2008:
Search for the following installation program:
3130cn_Installer_And_Application_Dell_A04_MAC.dmg
Inside this package you will find the driver for 10.7 and higher. After installing the package I could add an IP printer with this driver:
Reference Dell 3130cn Color Laser v3017.104 PS
With this driver installed, I can use my printer Dell 3110cn without problem.
Perhaps it might help you too.
Concerning
-
Hey guys, more of a statement than a question. If you have a Dell Sonicwall and users do "found no appropriate group" of course the same user does not exist as a local user and a domain user. This will cause problems. Took me a while to understand that >.<>
Good thought.
Thank you
Ben D
Reference Dell SonicWall
#Iwork4dell -
Reference Dell 2007FP vs HP zr22w
Hi guys, I use t410s now. You want to find an IPS monitor. Currently have two choices.
Reference Dell 2007FP (handed to nine 30-day warranty) $95
HP zr22w (new, 3-year warranty) $175
What would be a good choice?
Not for the game.
But need good color, good text, Word process, sometimes a movie.
The HP zr22w DP, is better than the VGA to connect to my T410s?
Thank you!
Your information is so helpful. But I think that I can not check the number helpfully I ordered from DELL FINANCIAL SERVICES. Thank you very much!
-
Reference Dell place 8 just out of warranty and dead now?
Hello
Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.
I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14
What a *.
Reference Dell of mobile devices (phones) & tablets
1-800-308-3355 24 / 7
Maybe you are looking for
-
Target Disk Mode - MacBook is not mounted in the desktop iMac
I have a MacBook to 2015 and a cable USB-A-USB-C marked 'SS '. In November 2015, I might start my MacBook in TDM and plug it into my iMac 2013 and see him mount on the desktop. I could then synchronize some of the files (using synchronize folders)
-
Font problem after updating MS omnibox are a vulnerability
Since 21 July update for a vulnerability of Microsoft Font, character in the omnibox display is faulty.This seems to happen only in the input box, the list is ok.for example. I type www and the display shows just the white characters (but the cursor
-
I was working on my desk this morning. I tried to open a file. I must have clicked wrong. The file is missing. I can't find. What can I do?
-
I have a vi (written in labview 8.6) that I am trying to run it on another pc; However, after you install the trial version on the other pc and daqmx base, I can't run it. The PDM vi is missing. They are not in the basic version of data acquisition?
-
Error code 646 Windows 7 update.
Why updates is KB2289158, KB2413381, KB2431831 AND KB2288931, do not continually settle, has happened since November 10, 2010!, other updates that have been noted since then have had no problem. I deleted something essential or what... Apart from tha