Regedit opens and closes immediately

Similar Questions

• Windows and programs open and close immediately by clicking on them

  Hello

  I have problems with my pc for 4 weeks...
  When I try to open a window, the program, it will be open, glisten and close immediately.
  He does it with everything, internet Explorer, Control Panel.

  -J' have a DELL studio PC
  -There are 4 months 'old.
  -J' tried reinstallin windows and every single program, with which it came
  but the problem is there
  -J' have windows vista home premium 64-bit edition

  Anyone know what causes this problem?

  Thank you
  Ana

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us

  If you encounter the same problem after reinstalling Vista, contact Dell as your computer isn't old 4 butterflies.

  You are under warranty Dell; make a claim.

  See you soon. Mick Murphy - Microsoft partner

• Some program flashes automatically opens and closes immediately

  This program flashes - opens and closes automatically every three to five minutes which is really annoying:

  http://img132.imageshack.us/img132/164/flashlb.jpg
  Please note that Im not trying to open any program, it opens at random every few minutes.
  What is this program?
  How can I disable this opening automathic?
  Thank you

  At either the analysis of the find anything bad?

  1. As a test, if you start in safe mode with network, it continues to blink then?
  2. If you boot into normal windows and sitting mode to your desktop (IDLE - running nothing) is still flash upward?
  3. If it isn't, then open IE and let it run only on your home page - it flashes up then?
  4. If it sounds like a browser hijacking might be. Have a read through this - http://www.microsoft.com/en-gb/security/pc-security/browser-hijacking.aspx and see if it helps. NOTE: DO NOT worry about step 2 (MSE) IF you already have a bunch of AV updated running on your PC.

  
  

  Who will stop him?
  

  
  

• Lightroom opens and closes immediately

  I have a mac. Lightroom opens and immediately closes without any error message. Solutions?

  Try to connect on the desktop CC app, and then sign in again. Connect, disconnect you and | Creative desktop application Cloud

  ~ David

• App opens and closes immediately.

  Hello

  I have managed to install my application on my simulator (1.0.1) playbook. But when I try to launch the application, I get a boot screen logo of blackberry for about a second and then it closes and nothing happens, no matter how many times I try to open, it still does the same.

  Thank you

  AIR 2.6 can compile for AIR 2.5. Just make sure your descriptor has the AIR 2.5 namespace.

  With regard to the application disappears: http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Application-won-t-launch-on-simul...

• Executable file opens and closes immediately

  The development PC contains LV2012, The built executable file never runs in the PC developed but work in others, I improved the runtime by 2014, while remaining the same problem... As I could not uninstall the RunTime Engine (Not Shown In The Uninstall Option) 2012 I changed the folder name "National Instruments\Shared\LabVIEW Run-Time\2012.

  at the "National Instruments\Shared\LabVIEW Run-Time\2012asdas" just to beat the system... But now when I try to run the application it says "Cannot locate the Run Time Engine" "App requires a vesion 2012 (or compatible).

  So my question is

  1. What is the use of the installation of top version?

  2. How can I solve this problem?

  And please I don't want to uninstall the whole software and reinstall it again, I had asked the same question some time ago... but found no solution...

  Well, I solved this problem...

  What I did I deleted the folder "... \National Instruments\Shared\LabVIEW run-Time\2012.

  and installed using the "... \All Users\Application f4 Data\National Instruments\MDF\ProductCache\NI LabVIEW Run - Time Engine SP1 [12.1.61.0]\LV2012runtime.msi 2012.

  It does the job of properly reinstall (even when you try to install fresh and it says "More Version exists")

• Creating cloud App open and close / crash immediately.

  Creating cloud App open and close immediately on the mac pro book.

  There is no error message.

  I just saw icon cloud on the bar at the top for a few seconds and disappear from it and nothing happened.

  What I did:

  • reset and reinstal the CC App several times
  • Uninstall CC App and run a cleaning of Adobe tool and clean CC App. Install it again

  I still installed on Mac CS6 and cannot uninstall this time.

  MacBook Pro

  15-inch, mid-2012

  2.3 GHz Intel Core i7 processor

  8 GB 1600 MHz DDR3 memory

  NVIDIA GeForce GT 650M 512 MB graphics

  Software OS X 10.8.3 (12 D 78)

  Any solution?

  I found what the problem was.

  Another application causing the cc crashing.

  If someone using GROWL for Mac this application has a conflict with CC App.

  I close this application and everything seems to work properly.

  See you soon!

• I opened the window and 1-2 sec it close and open and close only I can't use firefox what should I do?

  When I open firefox, it opens and after 1-2 seconds it closes so I can't do anything and it will open and close automatically several times.
  I have uninstall for a month of waiting for the new version hopes can solve this problem, but he cant last vertion is 37.0.1 now 38.0 I used Windows 7
  What should I do?
  I always use firefox be my browser. But if this problem cannot be resolved, so I can't use it

  What happens when you start Firefox in Firefox SafeMode?
  https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode#w_how-to-start-Firefox-in-safe-mode

• Track pad pinch open and close does not not with Firefox 4

  pinch open and close feature to adjust the size on my touch pad Mac does not work

  The first part is the pref name and the second part of the command that you can use as the new value of the preference. Preferences have a value of empty string and you can double-click the pref to change the value of a copy and paste.

  browser.gesture.pinch.in -> cmd_fullZoomReduce
  browser.gesture.pinch.in.shift -> cmd_fullZoomReset
  browser.gesture.pinch.out -> cmd_fullZoomEnlarge
  browser.gesture.pinch.out.shift -> cmd_fullZoomReset
  

• Open and close the Panel the Subvi front

  Hi all

  Run LabVIEW 2011 on Windows 7 x 64.  I am trying to get a Subvi front to open from my main PC with the touch of a button, then close with a button press in the Subvi.  Here's the piece of my main FP who calls the VI and opens the FP

  Locations is defined in another loop and all loops are in a flat order.  I made this way because I want to start with the first press and not stop my main loop to run.  So I don't know if I can run in the same line as the event or not, I've moved the element to the left loop around a lot.  Anyway the VI of openness seems to work very well.

  The problem arises when you try to close the Subvi for the SECOND time.  The code is here:

  

  As I said, the first time I open and close the VI everything works as it should, hopefully.  Then, I am able to reopen but now 'empty' button does not work and I can't close the window or even to open the block diagram to probe anything.  I tried to understand this point for a while, any insite would be greatly appreciated!

  Thank you

  Found my problem, I had the wrong boolean on one of my other events.  If this seems to be a good way to open/close a Subvi if anyone is interested!

• VI of hand stops fucntioning after as I open and close a Subvi to a structrue event.

  Hello

  I try to open a pop up vi of an event. I've been struggling with this for a while now. When I open a pop up vi and close it, the main vi stops correctly.

  I narrowed down it to the fact that the event that reminds the Subvi is never ending when the Subvi is closed.

  The attached picture is an example of what I'm doing. When I run the present, I never see the dialog box indicating "here.

  may be useful as an allusion to the problem...

  This does not work correctly if I run the vi, click to open the Subvi, close the Subvi (here the main vi is not working properly, do not click on anything whatsoever) then stop the main vi, run the main vi has even once, open and close the Subvi and then I see the dialog 'here '. , and my main vi works correctly.

  Thank you

  J

  

  What actually happens, is press you the Ok button and your panel closes and you set the stop 2 true.  OK, it's fine except that the stop Terminal 2 has already been read during this iteration of the loop.  So the loop will go again.  This time, it is read stop 2 to a REAL, but the structure of event needs an event before the loop can fill.  But the façade was already closed and you're stuck.

  As Dennis said, get rid of the 2 stop and just wire the TRUE constant straight out of the case of the event.  Wire a FALSE for all other cases of event.

• Window opens and closes automatically

  I also have the same problem.
  I bought a laptop more than two weeks ago, I turned on and it started downloading the updates for Vista. (I have Vista Home Premium)
  Then when I turned off my laptop, you could see that Vista was installing updates before power off.

  When I restarted the laptop, I have the same problem that jmwmh has.
  Several programs of the control panel will not open, as the update of Windows, user accounts, Parental controls, etc. They open and close automatically.
  I even used the recovery DVD and reinstalled Vista several times, but after some time, the problem returns.

  I even tried to disable Windows Update, because I discovered that it was after an update of Vista that my laptop has gone mad, but STILL it downloads an update and installs it without my permission.

  I have administrator rights, so this isn't the problem...

  Any ideas?

  Donangelus,

  Thank you for using answers.microsoft.com

  My suggestion is to try to create a new user profile and see if the problem occurs in the new profile.

  Here are the steps to create the account.

  • Create a new user profile:
    Follow these steps to create a new account, we can test:
    1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

  Let us know if that fixes the problem or if assistance is needed.

  Kind regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• No video and microphone when I open and close the laptop

  I have a Pavilion dv7 everytime I open and close my laptop to the camera and the microphone stops and it does not appear in Device Manager. It of like something is loose inside, this happened before its just out of warranty and how can it be solved?

  Thanks, I still have a warranty on the outside and I talked to them, so I'll send for repair. In the case of an ongoing problem I wish HP would recall and fix the problem.

• When I try to defrag, a window opens and closes and a file download-security warning. A loop repeats. Other programs to do the same thing. Please help me fix this loop? SOS?

  When I run defrag, an IE window opens and closes and a file download-security warning comes up and asks me to run or save the file name: c:\windows\system32 dfrgui.exe, if I hit then another warning of IE - sec stands up and says 'the Publisher could not be verified. Are you sure that you want to run. I struck and the loop repeats. I run a diag of the F10 boot menu with dell. They say that its software and non-material, pay! Microsoft says that Dell is responsible. Other programs to do the same thing. I've updated and rerun my AVG security without error. We are automatically updated, and no other programs were added. Please help me fix this loop? SOS?

  Vista - open file - security warning
  http://www.Vistax64.com/Vista-security/125044-open-file-security-warning.html

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Your programs launch properly from Safe Mode?  Or Normal Mode if you create another user to test with?

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• My command prompt opens and closes quickly until I can read anything.

  I am trying to open a Python file via the command prompt but whenever he opens, it closes immediately before I can even read anything. I understood once the question involving browser windows, etc, but now I can't understand for the life of me how to solve this problem again.

  Could contribute to this article on the opening of a Python file in the command prompt.
  http://www.Voidspace.org.UK/Python/articles/COMMAND_LINE.shtml

  Thank you