Similar Questions

• I ran several analyzers antivirus from AVG to ODILE and none of them does not seem to get rid of this virus (Exploit: win32 / pdfjsc.dr)

  I ran several analyzers antivirus from AVG to ODILE and none of them does not seem to get rid of this virus (Exploit: win32 / pdfjsc.dr)

  Any suggestions apart from simply all formatting?

  Hello

  Exploit: Win32 / Pdfjsc.Dr
  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=exploit%3aWin32%2fPdfjsc.Dr

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• In the new window of the tab, I get a full screen of a site, and I do not see the gear of NEW CONTROLS TAB

  In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
  I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
  I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
  I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciated

  What do you see on the page, just nothing?

  Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit

  If you open a new tab, which solve this problem?

  Edit: sorry for typo's fault: browser.newtab.url

• I'm trying to stop my subscription. I'm always redirected to this forum and I am not able to communicate with anyone

  I'm trying to stop my subscription. I'm always redirected to this forum and I am not able to communicate with anyone

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Kind regards

  Sheena

• I would like to add photos to my favorites on my first page, why some of them shows the photo of the homepage of the Web site and some do not show the pic?

  Some Web sites appear with the photo home page and some do not.

  Pages that sends a header non-magasin or no.-cache (Tools > Page Info > General) are not cached and therefore Firefox does not generate a thumbnail (Bug #754608). Also, you get a thumbnail if it has a secure connection (https) is used.

• I can get some future Web sites and others do not. When I try to connect to any site, I get this message and cannot connect

  The secure connection failed

  An error occurred during a connection to mail.yahoo.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  The most common reason for the 'sec_error_bad_signature' many sites seems to be the shield of Web of Avast. Web Shield intercepts your navigation and filter, but to filter sites secure, it has "fake" certificates for Firefox. Avast have set Firefox to rely on its false certificates, but which seems to fail on a regular basis.

  To test this theory, try disabling scanning of encrypted sites. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok

  If that solves the problem, but you want to filter encrypted communication, you need to import the Avast! signature in Firefox Certificate Manager of certificates, References tab.

• using Windows8 and when you perform a search I get about 6 selectable sites and then the following seems to be as written in the program data!

  When I use the search engine some sites appear on the screen OK, but then the rest appear as programming information. That is to say, it is not possible to read what the sites are.

  I tried to take a screenshot, and although this seems to have been succesfull it will not download. Download images show that it is to continue to load "screenshot. PNG', but it will not download.

  I hope someone can help my description above problem!

  Thanks FredMaD
  That seems to have done the trick

• Help! I ran CCleaner a week ago and now cannot get on a few gaming sites. At the suggestion of a friend I click Start, run, cmd and ping sites and they have not been found.

  Maybe the registry files?

  CCleaner is an excellent program for computer maintenance, but you should never use its registry tools. Because you forgot to tell us which games sites, you can reach, I can't check out them for you.

  If you have used the registry cleaner in CCleaner, see if it has an undo feature and if it does - use it. If not, post back with the URLS of the sites that you can reach. Also tell us what browser you use - IE6, IE7, IE8, Firefox, Safari, etc., and if you do not to sites with a particular browser, what happens when you try with another. MS - MVP - Elephant Boy computers - don't panic!

• monitor the ASA remote site and allow the ACS to authenticate

  Hi all

  I have a VPN site to set up and works fine, but am struggling to get two things configured, hope can get help from you all

  I need to monitor the ASA distance of my HQ, I use kulvik with snmp, but I am afraid if he would be a threat if I open snmp on my external interface

  'access-list extended permitted snmp 20.x.x.x 19.x.x.x acl_outside' - is this safe

  my configuration:

  Remote

  10.8.0.0/20---ASA---Internet---ASA---10.0.0.0

  I was wondering is it otherwise I get my remote ASA monitored

  My next challenge is to add GANYMEDE ASA configuration, my CSA is 10.6.1.186 that can be reached from LAN(10.8.0.0/20) remote, but not the ASA because of politics, how can I get this to work

  I searched how to add the source interface in config GANYMEDE but couldn't get

  Thank you very much for the support

  See you soon...

  For the interface you want to use, can you pls add the following command:

  access to the administration

  For example:

  access to the administration server - vlan

  or

  access to data management - vlan

  You can only configure 1 interface for the management interface.

• Expand the production VLAN behind ASA5510 to the remote site and 2821

  I have a 5510 ASA and here to contact one of the subnets behind this ASA out to my house which has a modem cable, a switch/router wireless and then behind that I have a router 2821.  I have read and it seems that L2TP can be the way to go, but can not find config examples.  Yet once again, I'd extend an and nail a permanent connection of one of VLAN in the production network to the bottom of my house using my cable modem and the 2821.  Examples of configuration would be very appreciated!  In addition, any recommendations for the IOS 2821 would be very appreciated.  Finally, the L2TP looks like how I need to go?  I enclose a very basic Visio diagram of what I'm trying to do.  Thank you, john

  You must L2TPv3.

  ASA does not support but will pass L2TPv3 borrowing.

  At work, you will need to add another router. L3 switches does not support it.

  The configuration of a router would be:

  Pseudowire-class test

  L2TPv3 encapsulation

  IP local interface loopback0 (this will be the source of the tunnel, can use any interface with the IP address access remote xconnect)

  !

  int fas0/0.30

  (do not put an ip address here)

  encapsulation dot1q 30

  pw-class xconnect X.X.X.X 1000 test

  X.X.X.X is the IP the remote router interface, it serves to "interface local ip" in the remote configuration

  Make sure that corresponds to 1000 (VC ID) on both sides

• I often trust my Norton Toolbar for sites, and it does not work with the new updates. Can I uninstall updates recent Mozilla up to what this module works with Mozilla, but I'm stuck? Thank you!

  It's probably very easy to understand this and to uninstall the updates to date, but, well, I am slightly tech-illiterate! I use my Norton Toolbar a lot for the sites I visit frequently, and this no compatibility issue is the same reason I stick with Mozilla on Chrome, but now I can not even use my Norton with Mozilla information. Thank you.

  http://community.Norton.com/T5/Norton-Internet-security-Norton/Norton-toolbar-not-compatible-with-FF-4-0-1/TD-p/442788

• I bought a widget on the muse of the model site and it does not appear in my library:

  I tried to download a purchased widget "video full browser width" via the extensions Manager and also manually, but none worked. It appears in the extensions manager that I just can't transfer it to muse.   The file that I have has a .zxp.

  It is not in the widgets, is not in the library and the library does not recognize this extension.  None of the information on the installation works, I've never had problems in the past just this one: https://creative.adobe.com/addons/patches/21571#.VZeG0vmqpBc

  I can't even contact clients like Adobe, links back to the menu link.

  Any suggestions please?

  Thank you

  Joel.

  You will probably need to contact the third-party developer of the widget. Muse/Adobe do not build or sell widgets. The Exchange is really just a place for vendors to sell their widgets much you the Apple App Store.

• Redirected at sign in New York Times (and a few other sites) and Firefox will not remember login username or password.

  He looked a few days ago. Using an iMac 27 inches, 10.8.5, 28.0 Firefox running.

  I had the same NYT years account and I got disconnected somehow. When I try to read a story or a sign on my account via the home page (upper right corner sign in button) I simply redirected to the home page with the same sign in button, normally it displays your user name. I tried everything erase the cache, cookies and a full and clean re - install, twice. I called the New York TIMES, and they are totally perplexed. Computer is protected by a firewall and antivirused, no viruses known etc...

  Any ideas out there? Thank you!

  Thanks for the reply.

  I solved the problem. It turns out that there was a problem with my anti-virus software, which involved a filter cookies that had to be put off. DOH!

• Since Firefox v10. Layout, print preview and print do not seem to work with XP PRO SP2 x 64, but normally work with Win7 x 64.

  Layout, simply change line title to the foreground and freezes the screen except for the ability to close the page and return to the page where Page Setup was invoked. This print preview a gray monochrome page with the normal menu features that normally respond except the function of setting of the Page. Print prints a blank page still. Noticed problems with Firefox beta versions 10 and 11 and 12, with XP Pro SP2 x 64. Firefox version 11 has no such problems with Windows 7 ult x 64.

  Hello

  Please see this.

  Printing problems

• My backspace key is very slow in removing letters - you must press to delete one letter at a time - can anyone help? Also the arrows left and right do not seem to work

  The BACKSPACE on my keyboard is only remove a letter at a time after pressing the button several times and wait between pressing the button to erase the letters. None of the answers anyone?

  You can try to uninstall the keyboard in the Device Manager

  and restart windows, then reload the material.