Remote works except the click to start anything.

Similar Questions

• T410i numbers do not work except the 5 and 6

  Having a problem with the normal numbers does not.

  This has nothing to do with them being dirty or who need to be replaced, nor is the number lock on.

  None of the numbers works except the 5 and 6.

  If I'm in firefox by typing in the google search bar when I press 1, for example, the keypad will beep, firefox will switch to full-screen mode and the text box will start to AutoFill with 1111111111. does any number is pressed. except the 5 and 6.

  Similarly if I am in word, except that it will bring up save as box and start to auto-fill in the name of population with 111111

  The only way I can type 1 at the present time is to use the on-screen keyboard.

  I've done the fn nmlk nmlk capslk, combos and is not her back.

  I restarted and it is always the same.

  Thanks for watching!

  I am running Win 7 pro

  the keyboard was defective. He had a small amount of cash months ago, and it took all this time to make the problem appear.

  a keyboard replacement and everything's fine. Thanks for the pointers!

• I have and HP 4 in 1 printer, etc. Everything works except the impression.

  I have and HP 4 in 1 printer, etc.  Everything works except the impression.  Under control panel, the printer shows as loan and default. When I send a doc, he's going to wait but does not print. I tried a lot of things.  Help?

  • What printer model?
  • What version of Windows, including service pack?
  • How the printer is connected to the computer?
  • Printing has already worked with the printer? If so, what happened just before the problem started?
  • The other functions of the unit working ("everything works") involve the communication of the computer to the device or you are talking just to use it to make copies and send faxes using the controls on the front panel of the unit? Please provide examples of what works.
  • You have another printer connected to the computer, and if so, can you print to it?

• webcam works but the software cannot start the capture device

  Original title: webcam problems

  purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you

  Hi reefwatcher,

  1. Did you the latest changes on the computer?
  2. You are able to use the webcam on other applications?
  3. You receive an error message?

  Method 1

  To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.

  http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm

  http://www.ikitmovie.com/free-trial-stop-motion-software.php

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 3

  If the previous step fails, then you will need to contact the software retailer for assistance.

  http://www.ikitmovie.com/contact-us.php

• I currently have a website under Server 2003 IIS 6.0. I'm moving the site to server2008 R2 IIS 7.0. Everything works except the credit card verification.

  I currently have a website under Server 2003 IIS 6.0. I'm moving the site to server2008 R2 IIS 7.0. Everything works except the verification of the credit card at secure.authorize.net. I have a problem connecting to secure.authorize.net. I try to connect to secure.authorize.net via the browser without success. But I can connect to secure.authorize.net with any of the other computers on my network. It seems also secure.authorize.net is only the DNS I can't connect to with server20008. All of the suggestions.

  Source language

  Hi Melvin

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forums.

  Windows Server 2008 R2 General:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  The official Forums of Microsoft IIS: http://forums.iis.net/

  Concerning

• try to connect the blue ray player to my laptop, everything works except the connection to the gateway?

  try to connect the blue ray player to my laptop, everything works except the connection

  Hi ArnoldWalterArnold,

  What exact error message that you receive?
  How do you connect your Blu - ray player to your laptop?
  This thread may contain information that can help you:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/playing-an-external-Blu-ray-drive-on-laptop/cfeeeacc-043d-45B7-9570-dbefb9c9172d

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

  Hello JesusVigo,

  Thank you for visiting the Microsoft answers community.

  Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?

  Also, I found only 1 driver on your system gateway Web site is located here.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP SimplePass does not work except the windows log on screen

  Hey,.

  When I bought this pc, it is Windows 8. I've updated my pc to the latest version 8.1 of windows. After the first update SimplePass stopped working on all browsers except Internet Explorer. He stopped work on the login screen too. But for some reason he started working on the newspaper on the screen all of a sudden. I contacted HP through chat support. They said that SimplePass is designed to work only with Internet Explorer. Other browsers may work or not. It is very good. According to his (Agent HP) SimplePass still works.

  But after the SimplePass update stopped working completely except the login screen. I click on the icon SimplePass... no answer... I slip on the fingerprint reader... nothing happens. But the computer only works on the windows login screen. Below is my current pc info. I think that HP must update SimplePass.

  Operating system: Windows 8.1 64 bit (version 6.3, 9600) (9600.winblue_gdr.140330 - 1035)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  System model: HP ENVY 15 notebook PC
  BIOS: F.56
  Processor: Intel Core i7-4700MQ CPU @ 2.40 GHz (8 CPUs), ~2.4GHz
  Memory: RAM 8192MB
  Available OS memory: 8124MB RAM
  Page file: 2859MB used, 6544 MB of available space

  Sharif Tamim

  Hello Sharif_Tamim,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not able to operate SimplePass properly, and I'd be happy to help you in this case!

  The most recent version for SimplePass can be downloaded to your system by following this link: updated HP SimplePass Identity Protection Software .

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• MG6320 Scanner Stopped Working - "Set the PC to start scanning.

  I got this printer/scanner for several years, and the scanner has always worked.  Today, it doesn't.  I put the paper on the tray and then select Scan and finally select color to start the search.  It has always worked.  Today, I get the message on the screen, "set the PC to start scanning."

  I have the scanner set to send the images to my computer, and he has always demonstrated on behalf of my computer on the screen.  Today it just shows "Local USB" and cannot locate my computer.  I tried to check the status of the wireless network, and which indicates 100% with a signal strong.

  I did a search in this forum and found positions that were similar, but not identical to my problem.  In these messages, people were getting this message (set the PC to start scanning) from the beginning.  Mine has worked so far.

  Thanks in advance for all you can give me advice.

  In fact, this program was not running.  It must have been in the past, because this is how I've always been analyzed before.

  It worked!  Thanks much for the reply.  I really enjoy taking the time to answer.

• BlackBerry Smartphones flushed down the toilet - everything works except the speaker...

  Hi, hope someone can help you.

  As the title suggests, I emptied my phone down the loo (it was an accident), but now everything works perfectly, but I have no sound.

  Thus, no ringing and I checked the music & who doesn't work or the other.  I guess something has fried, does anyone have suggestions?

  Thank you very much.

  How long has been parched? Probably not enough, something like that REQUIRES 4-5 full days, no battery, no checked during the process and left in rice dry throughout the period.

  The application of device using Self Test on the BlackBerry smartphone can provide additional diagnostic information to help identify the problem, see KB16037

• MG6320 Scanner Stopped Working - "Set the PC to start scanning ' WINDOWS 8.1

  I had this problem when I was on Windows 7 and it is solved by what Ramona suggested:

  "The Canon IJ Network Scanner selector EX must be running on your computer to scan using the control panel of the printer.  To start the program in the Start Menu on your computer, select all programs, then commercial of Canon IJ Network Scanner selector EX (folder), then IJ Network Scanner selector EX (program).  Once launched, the program appears in the notification area of the taskbar. "

  Now I have a new computer with Windows 8.1 and can not find ' all programs and utilities of Canon, etc.»

  Can someone please?  I asked this question at the end of my other post, and he had 39 points of view, but not answers.

  Thanks to all those who can help you.

  Hi GlassHalfFull,

  Launch the IJ Network Scanner selector Windows 8.1 EX, the Windows start screen, you can just start typing 'IJ' to bring up the window of research, then in the section drop-down menu above the text field, select 'Everywhere' and continue typing "Network Scanner selector EX" until you see the program appears as an option to click on.  Once you click on "IJ Network Scanner selector EX", it must launch the program.

  Another method, you can use would be to go to the Windows start screen, then to the bottom of the window under the tiles, you should see an arrow down in a circle.  Click on the arrow, then go and find the Canon utility section and click the icon for the IJ Network Scanner selector E.G.

  I hope this helps!

• I had to use my system disk and recovery to all disc reinstall on my Acer laptop. everything works except the sound only comes out of the speakers

  It is said that my speakers are working... but nothing comes of them. :( I was struggled with this laptop because it struck at 6 months. I sent in by Geek Squad in Best Buy, they sent and everything has been replaced inside. they gave me back with absolutely no work system. He was not able to load or anything. I've made repeatedly to get systems but they said I should go to Acer. I received the CD from the company and brought back the cds and the laptop to Geek Squad/Best Buy. The tech guy said that a fool would put a cd into a laptop computer and load it. When in reality it was really working. In recent days, I put the CD and discovered that we had finally got the right CD. Records of the system and the recovery disks, but I tried to listen to music and watch movies, but no sound. It bothers me because I tried to solve this problem for over a year. I'm hard pressed economy, and the need to understand this point before I go to College. I don't really have the money to buy another laptop.

  I really hope someone can help!

  Thank you!

  Hello

  I suggest you to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  It will be useful.

• Blocker does not work after the click of the mouse

  Lately (since Feb) almost all the Web sites I visit issues this popup asking me to participate in a survey of my use and offers a "gift" for taking part. This happens usually after that I click on a link to a secondary page of the site. I tried to take the survey, in the hope that the popups will leave then. No SOAP! They always activate each time. A site that I use will generate the popup multiple times I'm going through various links on the site. Of course I block the game in the CONTENT section of the TOOLS menu.

  You have installed probably accidentally a somewhat malicious add-on. Which is created this particular window.

  I had this problem before in the past.

  to remove it. You must find the add-on which is their creation and remove it.

  to remove the modules follow these instructions
  https://support.Mozilla.org/en-us/KB/disable-or-remove-add-ons

• After running chkdsk because I had blue screen whenever I started, now it works but the taskbar and start button are gone! I tried to run explorer.exe but who did nothing!

  I have an emachines T6534 and whenever I start my computer, I would get an error stop 0 x 00000024. I ran chkdsk on my other computer with the hard drive and it seemed to fix the Blue error screen. But now, whenever I log in, it takes 15 minutes to log on and I can't access the files. The "Start" button does not appear or is the taskbar. I can run the Task Manager, but that's all. I have very important files on the hard drive and cannot afford to lose. I can't even open internet explore from the Task Manager. When I try to run the system restore, it says 'system restore is unable to protect your computer.

  Please help me! Thank you very much.

  I have an emachines T6534 and whenever I start my computer, I would get an error stop 0 x 00000024. I ran chkdsk on my other computer with the hard drive and it seemed to fix the Blue error screen. But now, whenever I log in, it takes 15 minutes to log on and I can't access the files. The "Start" button does not appear or is the taskbar. I can run the Task Manager, but that's all. I have very important files on the hard drive and cannot afford to lose. I can't even open internet explore from the Task Manager. When I try to run the system restore, it says 'system restore is unable to protect your computer.

  Please help me! Thank you very much.

  The Stop 0 x 24 message indicates that a problem has occurred in Ntfs.sys, the driver file that allows the system to read and write to NTFS file system drives. A message similar to Stop 0 x 23, exists for the file systems (FAT16 or FAT32) file allocation table to.

  Possible resolutions:

  1. hardware malfunctioning SCSI and Advanced Technology Attachment (ATA) or drivers can also adversely affect the ability of the system to read and write to disk, causing errors. If you use SCSI hard disks, check the wiring problems and ending between the SCSI controller and the disks. Periodically check Event Viewer for error messages that are associated with SCSI or FASTFAT in the journal system or Autochk in the application log.

  2. check that the tools that allows you to continuously monitor your system, such as virus scanners, programs of backup or disk defragmenters are compatible with Windows XP. Some drives and cards are issued with diagnostic software that you can use to run hardware tests.