Remove header and footer file

Similar Questions

• I only get the (page 1 of 1) header and footer (file://C...) when I print online

  When I try to print a document online, I only get the (page 1 of 1) header and footer (file://C...)  This is not always the case.

  How to print the document, as indicated on the screen?

  I'm on HP Officejet Pro 8600, but had the same problem with my HP Officejet 6500.

  Windows 7

  He tried again on another messaging - and it worked! It must be me.
  Thank you.

• Remove header and footer on the print page

  Hi, I need to have removed the header & footer when you print a page.

  How would I implement this.

  I need to print from the AOL 9.7 software and the printer is a HP Officejet J4580

  Thank you

  It is a function of your printer software.  You will need to find the settings in the software.

• How to set the header and footer settings

  HP Officejet Pro 8600 - N911a

  Windows 7 64 bit

  Printer wireless

  Using the Firefox browser

  I finally found where I can go to define the parameters of the header and footer: file then page setup

  However, I don't know what numbers to put in the top, bottom, left and right margins so that the header and the footer is printed when I print anything.

  It is only printing on the bottom half of the header at the top and the low foot.

  Also, how can I print only a "selection" of a page.  I highlight the part that I want to print only, but I don't know how to do this.

  Any help is greatly appreciated.

  Thank you.

  You encounter formatting problems are a matter of the browser you use and the format that it allows. There are modules of your browser that may allow you more features, but that would depend on the application itself. Also you can see one of the other browsers (Chromeor IE and see if they have the features you are looking for.)

  In regards to printing a section of the page, I advise to use the tool captures (just type in the menu START and type this program) which will essentially allow you to take screenshots of areas only you want to print. You can then print or save, or do both.

  Let me know!

• How can I remove the header and footer of the Cabinet

  How can I make a flat square box in the ADF? What I do use PanelBox or is there another component? or do I just use html div?

  When I use PanelBox I get the header and foot shadow. I want to remove that. Can someone give me the code to do?

  I tried this in the Css, but did not work:

  .panelBoxClass1 af | panelBox:footer-{start: kernel: default}
  display: none;
  }

  .panelBoxClass1af | panelBox:footer - Centre: kernel: default {}
  display: none;
  }

  .panelBoxClass1af | panelBox:footer-{end: core: default}
  display: none;
  }
  
  .panelBoxClass1af | panelBox:header-{start: kernel: default}
  display: none;
  }

  .panelBoxClass1af | panelBox:header - Centre: kernel: default {}
  display: none;
  }

  .panelBoxClass1af | panelBox:header-{end: core: default}
  display: none;
  }

  where panelBoxClass1 is the styleClass attribute defined on some Panel boxes. styleClass attribute did not work.

  put in inlineStyle-

  Width: 200px; height: 200px; border-color: ActiveBorder; border-style: solid; border-width: thin; background-color: blue;

  
  

  and it looks like this-

  
  

  Ashish

• How to remove headers and footer in numbers fields?

  The design of the document I did in numbers, has a few graphics in the footer of the page and Iwant to show at the border of the page when I print.

  My problem is that the fields in the header and footer cut the image and it is imposible to print full images of the design of the Bill.

  How can I remove these areas?

  Can you bring me another solution?

  Thank you!

  Hello there, alogarol.

  So you're willing to edit/remove content form headers and footers on a Numbers spreadsheet. The following Knowledge Base article offers some great information on this topic:

  Numbers for Mac: using headers and footers for printing

  Numbers for Mac 3.2 and later versions includes options for headers and footers when printing your spreadsheets.

  If you want to include headers and footers when printing your Numbers spreadsheets in numbers 3.2 and later, you can do this by editing them on the printing configuration screen.

  1. Choose print in the file menu.
  2. You should see a preview of the appearance of the sheet when you print it.
  3. To change the headers to the worksheet, click the top of the page and add the information you want there. To change the footer, click on the bottom of a page and add the information there.

  You can use the Zoom menu to make it easier to change the content of the header and footer.

  By default, the page numbers are included in the center of the footer section. If you want to remove the page numbers, you can select one in the preview and delete. Changes that you make to the header or the footer of a page affect all the pages of the journal. However, the header and the foot is separate for each worksheet in your worksheet.

  Changes that you make to your headers and footers are saved as part of the worksheet. If you want to leave the printing without print configuration screen, click done in the AME

  Thanks for being part of the communities of Apple Support.

  See you soon.

• Header and footer does not.

  With the new update, the header and the footer in master pages do not work correctly on published sites, specifically the look of text. When I saw this muse, all pages look very well, and even when I Preview in the browser, it looks good. The problem starts when I publish in Business Catalyst, so it might be a problem here, but I don't know. Is someone can shine some light on this issue? I've tried everything. Here are two sites that I'm getting that seem to have the same problem:

  Showcase 3D printing

  Misión Iglesia Cristiana Nuevo en Houston, Texas once. Pastor Balmore Díaz

  On both sites, the home page header and footer appear as its supposed to, but once you browse through the other pages the style for the text of the header and footer design is removed.

  Disable 'IBE' in the 'Advanced' Panel ' file > real estate Site "to Muse. Disable 'IBE' to avoid this bug. We have a fix in the tests. An update to this address should be published soon.

• Header and footer spacing issues

  I can't solve this problem.  Please help me with an answer to why this continues to happen.

  The image below shows a negative or 'empty' space above the blue square of icons.  Essentially filling the browser must be covered with this blue square of the header down to the footer (the right side is left alone)

  

  Below you will see my master page and where the header and footer are defined (ignore the rounded corners on the dark menu on the left.  I took the screen shot until I dropped the rounded corners)

  

  

  If I "uncheck" the option 'Footer' upstairs in my page on my homepage settings, the blue square attaches to the header and pushes the icons down to the footer; See below.

  

  If I let the 'Footer' option is selected, then the blue square and the icons are there where they are supposed to be in the square, but then, there is a negative or empty space above the blue square and icons (between the header and blue square and icons).

  

  Please, someone will give me a reason why he did this?  There are NO other objects in the way.

  I even deleted the fill browser background image and it always does!

  Please try to place the pictures icon separately on the page in case you have grouped the. Also if in any image and then remove the bezel and then check.

  If still the same issue, so I would need to check the file.

  Thank you

  Sanjit

• Problem with Notepad printing header and footer

  How can I get rid of the header and footer when I print something I wrote on Notepad.

  It does not show the on the notebook until I print it.

  In Notepad, use file > Page Setup to change the headers and footers.

  See also: https://support.microsoft.com/kb/78790

  That came in this research: https://www.google.com/search?q=windows+notepad+header+footer

• When you use Adobe Acrobat Pro DC, how do I convert my PDF to Excel and have it include the header and footer from the original PDF? I can't get it on down to the Excel worksheet.

  When you use Adobe Acrobat Pro DC, how do I convert my PDF to Excel and have it include the header and footer from the original PDF? I can convert all information of an organization but the footer and header with no discharge in the excel worksheet.

  Hi trudyb54940538,

  Converting PDF file to sheet Excel spread, header & foot is not included.  I am able to reproduce the problem at my end.

  Thanks for reporting the issue.

  Kind regards
  Nicos

• MISSING LAYOUTS - 2 column fixed, bar right side, header, and footer column 3 fixed, header and footer

  I use Dreamweaver 2013 and when I go to file, new and select new document, model HTML. My two page layouts (2 fixed column, right sidebar, 3 column AND header and footer fixed, header and footer) does not appear, instead it just says: < no >. Why this happens and how to fix this! Please help me!

  As I thought.

  You do not have these models it is because you are using the current version of DW CC 2015.

  These models have been deprecated / replaced by newer models of Bootstrap.

  You can read about the changes of product below.

  New features of CC 2015

  https://helpx.Adobe.com/Dreamweaver/using/whats-new.html

  If you are a Subscriber payment & your computer OS is Win7 or Mac OS x 10.7 (or an earlier version),

  You can fall back to a previous version of DW as most close as possible to your manual.

  Otherwise, you're out of luck.

  Nancy O.

• How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for 20 for detail header and 30 for the footer

  How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for header, 20 for retail and 30 for the footer.

  Here is the sample file

  DDWTYBILL13092502572 1000000112\\NHLSFS\ORACLE\ORACLE\BILLING\VERIFY\ 2013/09/25 01:19:08 BILLEND

  DDWTYBILL13092502572 2000000212PRIVATE PRIVATE STY5572142 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731543 Suspect 91TB? (AC) EMPIEEM A2 Z03.0 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000312PRIVATE PRIVATE STY5572149 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731548 empyema GMP A2 Z03.9 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000412PRIVATE PRIVATE STY5572351 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731584 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000512PRIVATE PRIVATE STY5572352 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731585 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000612MAJOR MAJOR STY5577530 010700 INV 12ZTYG000009 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS ZOZI, S, SIYAMBONGA 27 March 2010 TYG D3 DR MARCELIN 5602181 113799662 TB731663 lymphadenitis Ward D3 TYGERBERG HOSPITAL I88.9 Z03.9 07-AUG-201307-AUG-201324-SEP H1 - 2013MEND 58,52

  DDWTYBILL13092502572 2000000712MAJOR STY5577537 MAJOR 010700 INV 12ZTYG000009 06-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS DLAMINI, N, SIMON TYG 9 October 1976 F1 DR WZESE 5602181 135524676 TB731666 Suspect Ward TB F1 TYGERBERG HOSPITAL Z03.0 Z03.9 H1 07-AUG-201314-AUG-201324-SEP - 2013MEND 58,52

  DDWTYBILL13092502572 30003034120000003032END

  You can create a nXSD the use of the Native Format generator and advanced search attribute is used to read values to a specific position and use it as the choice. You can find an example here

  http://docs.Oracle.com/CD/E11036_01/integrate.1013/b28994/NFB.htm#BGBBAJFD

• Why Nav, header, and footer keep disappearing from web pages on DW CS4

  When I open a page of website file, it shows an asterisk, which means that a change has been made since the last save - nav, header and foot have disappeared!

  When I check the nav, footer and header, they're all astericks too, and I have not changed anything, because the last I looked on the pages.

  After panicking, I learned to do a right click on the file at the top of DW tab, and click on restore to get the pieces missing back, but why doesn't this keep happening?  Thank you!

  InJoy salvation,

  I mentioned yesterday a book that might be useful. It's * build your own

  Standards Compliant Website Using Dreamweaver 8, * written by Rachel Andrew,.

  published by Sitepoint Pty, Ltd 2005.

  It of an old book of basic, but explains the side Server includes and CSS

  styles quite clearly. Chapter 8, page 225-234 talks on the creation of the

  side Server and how it works so that the CSS style sheet includes

  - and how and why are sometimes not visible!

  So forget everything I've said because I really don't understand this myself, but

  Today, more than before after having read Chapter 8.

  You can buy the book the Sitepoint site, or it's probably in a lot of second

  stores hand holding books or even the library.

  Fun to read.

  Sunovice

• CFPDF ddx replace attribute in header and footer

  Hello
  
  I would like TO hear from anyone experimenting the new CFPDF tag in CF8, especially with the writing of PDF files using the ddx xml files.
  There is an attribute in the header and footer tags replace called = "true" which is supposed to allow you to overwrite existing headers/feet but I had no chance to get it works.
  
  Here is a code:
  <? XML version = "1.0" encoding = "UTF-8"? >
  "" < DDX xmlns = " http://ns.adobe.com/DDX/1.0/"
  "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance '
  "xsi: schemaLocation =" http://ns.adobe.com/DDX/1.0/ coldfusion_ddx.xsd ">"
  < result PDF output = "1" >
  < source PDF = "doc1" >
  < header replace = "true" >
  < right >
  < StyledText > < p color = "#333333" police = "Arial" font size = "9pt" > personal report for customer name here < /p > < / StyledText >
  < / right >
  < / header >
  < replace footer = "true" >
  < left >
  < StyledText >
  < p color = "#333333" police = "Arial" font size = '7pt' > valid only for the name of the customer here until the dd/mm/yyyy < /p >
  < / StyledText >
  < / left >
  < right >
  < StyledText >
  < p color = "#333333" police = "Arial" font size = "7pt" > Page < _PageNumber / > of < _LastPageNumber / > < / p >
  < / StyledText >
  < / right >
  < / footer >
  < / PDF >
  < / PDF >
  < / DDX >
  It is almost identical to the code in one of the examples in the CF8 docs (with the exception of the attribute replace) and CF8 passes using the isddx() function, see:
  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=cfpdf_17.html
  
  I found the reference to this attribute in the docs of livecycle:
  http://livedocs.Adobe.com/LiveCycle/ES/sdkHelp/programmer/sdkHelp/ddxRefMain.163.35.html (Bottom of page)
  http://livedocs.Adobe.com/LiveCycle/ES/sdkHelp/programmer/sdkHelp/ddxRefMain.163.36.html (Header)
  
  In the way - Jeff Chastain also has a nice article on CFPDF and ddx http://www.adobe.com/devnet/coldfusion/articles/ddx_pdf.html
  but it does not provide clues about the resolution of this attribute.
  
  If someone could do it works (or not) Please answer.
  
  See you soon
  Martin
  
  
  

  OK - I did a few more tests, and I may be wrong here!

  For the pdf files that I created with ColdFusion that have a header and a footer, replace it = 'true' WORKS!

  I tried to convert most of the pdf, I received for the test to the text (XML) which does not show the headers and footers, BUT it shows the text I tried to replace that gives me to think that the original PDF didn't, headers and footers, just a very thin margin.

  There are some pdf files that were created by generators for free online in pdf format AND does not seem livecyle like these at all. If I try to convert those text I get an error: "failure: FlateDecode filter.

  I'll leave this issue OPEN for now, in case someone else can provide feedback.

• page numbering and header and footer

  Greetings.
  
  I have the rtf model in a group by.
  
  The resulting report is a PDF file which has pages 3 and 4 for each ACCOUNT_NUMBER. The entire document is long about 40 pages.
  
  Now,.
  
  I want to add the header and footer of my document.
  
  (1) in the header, I want to add some fields like ACCOUNT_NUMBER, MONTH, YEAR (all the fields of the model that are different for each group). How can I do?
  I tried to put it just in a header, but what I get is all account_numbers on each page, or the first account number to each page.
  
  * The bonus would be that these fields are shoeing only on pages that are not the first to this account number. (Example 2/3, 3/3, 2/4,...)
  
  (2) I want to add the number of pages (in a style 1/3) in a page footer. I tried to incorporate it into a footer in word, but I get 1/40, 2/40, 3/40, 4/40, and I want to get 1/3,2/3,
  3/3, 1/4. I want to reset for each group.
  
  
  
  Can anyone help?
  
  Published by: user8090067 on December 24, 2009 01:03

  Sorry User8090067. I did not read the messages earlier completely.

  Just do the layout as mentioned Mahi (in your case (you don't want anything to come up on the first page) you can have a single page only, with your tags and Page layout). Your OWNER tag will not be printed on the first page of each section.

  You can still keep tags means that you must not put the header/footer in the respective sections in RTF.
  If you want to than your head to go in the header section of the RTF, put directly the tag it (as the form fields are not allowed and that you found yourself).

  Published by: user552238 on December 30, 2009 03:40