Remove instances of field of Foglight

Similar Questions

• Removing instance pool AM

  Hi experts.
  
  I need help to clarify certain concepts of pool application module.
  
  What happens with instances of application module and their database connections once they are removed from the pool of the AOS, either because the Instance of Idle Timeout or time Maximum Instance Timeout Live?
  
  1 are not reserved DB connections immediately returned to the JDBC connection pool? As Andrejus said in his post ([optimization of Oracle ADF AppPool | http://andrejusb.blogspot.com.es/2010/02/optimizing-oracle-adf-application-pool.html]), even after an instance of the application module is removed from the pool, it is still alive and keeps the reserved - DB connection in order to clean it, the maximum life expectancy is defined.
  2. why would want to preserve DB connection after the abduction of instance AM?
  
  3. don't deleted AM instances never go back in the pool? Alternatively, wait to be garbage collected?
  
  4. If the Instance Idle Timeout (jbo.ampool.maxinactiveage) is defined as less than the maximum duration of Instance to Live (jbo.ampool.timetolive). What role the latter in AM instance elimination / out DB connection?
  
  Thank you
  Barbara

  My understanding timetolive applies to AMs unused AMs not all. One exercise from the book of Jobinesh:
  >
  The monitor of the pool uses the following algorithm to remove instances of unused application module. It uses two independent strategies to identify candidates for removal:

  (1) the application module pool instructor will delete all instances of request unused module who lived in the pool for more than 3600000 milliseconds (1 hour) without worrying about the minimum size for the pool. You can override the maximum time to live for a module of the application by setting the jbo.ampool.timetolive configuration setting. The default value is 1 hour. In real life applications, you can use this property. To ignore this property during execution, you can set a value of 1.

  (2) the application module pool instructor will delete all instances of application module that are inactive for 600 000 milliseconds (10 minutes). This cleaning will be stopped when the number of instances in the basin reaches the minimum size available. The timeout of an application module can be configured by using the jbo.ampool.maxinactiveage parameter. The default timeout is 10 minutes.
  >
  Can highlight you when you have determined that it applies at ALL, so I can review it please?

  CM.

• Need help with Add/Remove buttons work field

  Someone here on the forums had previously helped me to get a button set up a form that would add an additional text field to a form.  I need now to a separate created button that will remove a text field in the case where too many have been added.  I hope someone can help me with this because my XML knowledge is virtually nil.  It's not like I can upload files to the forum here, so I'll try to paste my code.  I just need to get the "-" button to subtract a line.  Thanks in advance for the help.

  -Chris

  <? XML version = "1.0" encoding = "UTF-8"? >

  <? XFA generator = APIVersion "AdobeLiveCycleDesignerES_V8.2.1.4029.1.523496" = "2.8.9029.0?" >

  " < = xmlns:xdp xdp:xdp ' http://ns.Adobe.com/XDP/ " "timeStamp ="2010-06 - 28 T 16: 04:04Z" uuid = "081329f3-4914-4dde-87ae-75a83da8434e" >

  " < model xmlns =" http://www.XFA.org/schema/XFA-template/2.6/ ">

  <? formServer defaultPDFRenderFormat acrobat8.1static? >

  < name of the subform = "form1" layout = "CT" local = "en_US" >

  < Pagesand >

  < name Pagearea = "Page1" id = "Page1" >

  < contentArea x = 'No 19.05 mm' y = '12.7 mm"w ="190.5 mm"h ="266.7 mm"/ >

  < average stock = "default" short = long "612pt" = "792pt" / >

  <? templateDesigner expand 1? > < / pageArea >

  <? templateDesigner expand 1? > < / Pagesand >

  < subform w = "7.5" in h = "10.5" in name = "Page1" >

  < subform w = y "174,625 mm" = "79,377 mm" name = "Current_Objectives" layout = "CT" >

  < subform w = h "174,625 mm" = "9,522 mm' name = 'Objective' >

  < = minH "txt_currobj" field name = '8,263 mm"w = mm"174,625">

  < ui >

  < textEdit multiLine = "1" >

  < border >

  <? templateDesigner styleId aped3? >

  < STROKE edge = "lowered" / >

  < / border >

  < margin / >

  < / textEdit >

  < /UI >

  < font size = cast '11pt' = "Verdana" / >

  < topInset margin = ' 1 mm ' bottomInset = ' 1 mm ' leftInset = ' 1 mm ' rightInset = ' 1 mm "/ >

  < para vAlign = "middle" / >

  < caption reserve '7,76 mm' = >

  < para vAlign = "middle" / >

  < value >

  < text > 1. < / text >

  < / value >

  < font size = cast '11pt' = "Verdana" / >

  < / legend >

  < activity = 'initialize' name = "event__initialize" >

  < script contentType = "application/x-javascript" > this.caption.value.text.value = (this.parent.index + 1) + "."

  < /script >

  < / event >

  < / field >

  < occur max = "-1" / >

  <? templateDesigner expand 1? > < / subform >

  < field h = "5.08 mm" name = "curr_obj_add_line" w '5.08 mm' = >

  < ui >

  < button nail = 'push' / >

  < /UI >

  < character = "Arial" / >

  < caption >

  < value >

  < text > + < / text >

  < / value >

  < para hAlign = "center" vAlign = "middle" / >

  < character = "Arial" / >

  < / legend >

  < border = 'right' hand >

  < STROKE edge = "raised" / >

  < filling >

  < color value = '212, 208, 200' / >

  < / filling >

  <? templateDesigner styleId apbx2? > < / border >

  < link match = "none" / >

  < help >

  < toolTip > add < / ToolTip >

  < / help >

  < activity = "click on" name = "event__click" >

  < script contentType = "application/x-javascript" >

  _Objective.addInstance (1)

  < /script >

  < / event >

  < / field >

  < field h = "5.08 mm" name = "curr_obj_del_line" w '5.08 mm' = >

  < ui >

  < button nail = 'push' / >

  < /UI >

  < character = "Arial" / >

  < caption >

  < value >

  < text > - < / text >

  < / value >

  < para hAlign = "center" vAlign = "middle" / >

  < character = "Arial" / >

  < / legend >

  < border = 'right' hand >

  < STROKE edge = "raised" / >

  < filling >

  < color value = "212,208,200" / >

  < / filling >

  <? templateDesigner styleId apbx2? > < / border >

  < link match = "none" / >

  < help >

  < toolTip > delete an element < / ToolTip >

  < / help >

  < activity = "click on" name = "event__click" >

  < script contentType = "application/x-javascript" >

  _Objective.deleteInstance (1)

  < /script >

  < / event >

  < / field >

  <? templateDesigner expand 0? > < / subform >

  <? templateDesigner expand 1? > < / subform >

  < desc >

  < name of text = 'version' > 8.2.1.4029.1.523496.503679 < / text >

  < / desc >

  <? templateDesigner expand 1? > < / subform >

  <? templateDesigner DefaultLanguage FormCalc? >

  <? templateDesigner client DefaultRunAt? >

  <? Acrobat JavaScript strictScoping? >

  <? templateDesigner Zoom 100? >

  <? templateDesigner grid see the: 1, wink: 1, units: 0, color: ff8080, origin: (0,0), interval: (125000,125000)? >

  <? templateDesigner 26 FormTargetVersion? >

  <? templateDesigner 1 SaveTaggedPDF? >

  <? templateDesigner 1 SavePDFWithEmbeddedFonts? >

  <? templateDesigner horizontal management: 1, vertical: 1, guidelines: 1, crosshairs:0? > < / template >

  " < config xmlns =" http://www.XFA.org/schema/XCI/2.6/ ">

  < name of agent 'designer' = >

  PDF of < destination > < / destination >

  < pdf >

  <!-[0 n]->

  < fontInfo / >

  < / pdf >

  < / agent >

  < date >

  <!-[0 n]->

  < pdf >

  <!-[0 n]->

  < version > 1.7 < / version >

  < adobeExtensionLevel > 1 < / adobeExtensionLevel >

  < / pdf >

  < common / >

  < script >

  Server < runScripts > < / runScripts >

  < /script >

  < xdp >

  packs of <>* < / packages >

  < / xdp >

  < / date >

  <? originalXFAVersion http://www.XFA.org/schema/XCI/2.8/ ? > < / config >

  " < Romagna xmlns =" http://www.XFA.org/schema/XFA-locale-set/2.6/ ">

  <? originalXFAVersion http://www.XFA.org/schema/XFA-locale-set/2.6/ ?>

  < name of locale = 'en_US' desc 'English (United States)' = >

  < name calendarSymbols = "Gregorian" >

  < monthNames >

  < month > January < / month >

  < month > February < / month >

  < month > March < / month >

  < month > April < / month >

  < month > may < / month >

  < month > June < / month >

  < month > July < / month >

  < month > August < / month >

  < month > September < / month >

  < month > October < / month >

  < month > November < / month >

  < month > December < / month >

  < / monthNames >

  < abbr monthNames = "1" >

  < month > Jan < / month >

  < month > Feb < / month >

  < month > Tue < / month >

  < month > after < / month >

  < month > may < / month >

  < month > Jun < / month >

  < month > Jul < / month >

  < month > August < / month >

  < month > Ms < / month >

  < month > Oct < / month >

  < month > Nov < / month >

  < month > Dec < / month >

  < / monthNames >

  < dayNames >

  < day > Sunday < / day >

  Monday < day > < / day >

  < day > Tuesday < / day >

  < day > Wednesday < / day >

  < day > Thursday < / day >

  < day > Friday < / day >

  < day > Saturday < / day >

  < / dayNames >

  < dayNames abbr = "1" >

  < day > Sun < / day >

  < day > LUN < / day >

  < day > Tue < / day >

  < day > sea < / day >

  < day > set < / day >

  < day > sat < / day >

  < day > Sat < / day >

  < / dayNames >

  < meridiemNames >

  < meridiem > AM < / meridiem >

  < meridiem > AM < / meridiem >

  < / meridiemNames >

  < eraNames >

  < age > BC < / era >

  < age > AD < / era >

  < / eraNames >

  < / calendarSymbols >

  < datePatterns >

  < name datePattern 'full' = > EEEE, MMMM D, YYYY < / datePattern >

  < name datePattern = "long" > D MMMM, YYYY < / datePattern >

  < name datePattern "med" = > MMM D, YYYY < / datePattern >

  < name datePattern "short" = > d/m/YY < / datePattern >

  < / datePatterns >

  < timePatterns >

  < name timePattern 'full' = > SS A Z < / timePattern >

  < name timePattern = "long" > SS A Z < / timePattern >

  < name timePattern "med" = > SS A < / timePattern >

  < name timePattern 'short' = > h: mm A < / timePattern >

  < / timePatterns >

  < dateTimeSymbols > GyMdkHmsSEDFwWahKzZ < / dateTimeSymbols >

  < numberPatterns >

  < name numberPattern 'digital' = > z, zz9.zzz < / numberPattern >

  < name numberPattern = "currency" > $z, zz9.99 | ($z, zz9.99) < / numberPattern >

  < name numberPattern = '%' > z, zz9% < / numberPattern >

  < / numberPatterns >

  < numberSymbols >

  < name numberSymbol 'decimal' = >. < / numberSymbol >

  < numberSymbol = "group" name >, < / numberSymbol >

  < name numberSymbol = '%' > % < / numberSymbol >

  < numberSymbol name = 'less' > - < / numberSymbol >

  < numberSymbol name = "zero" > 0 < / numberSymbol >

  < / numberSymbols >

  < currencySymbols >

  < currencySymbol = 'symbol' name >$ < / currencySymbol >

  < name currencySymbol = "isoname" > $ < / currencySymbol >

  < currencySymbol = "decimal" name >. < / currencySymbol >

  < / currencySymbols >

  <>fonts

  < name of font = 'Myriad Pro' / >

  < name of font = "Minion Pro" / >

  < name of font = "Courier Std" / >

  < name of font = "Adobe Pi Std" / >

  < name of font = "Adobe Hebrew" / >

  < name of font = 'Adobe Arabic' / >

  < name of font = 'Adobe Thai' / >

  < name of font = "Kozuka Gothic Pro - VI M" / >

  < name of font = "Kozuka Mincho Pro - VI R" / >

  < name of font = 'Adobe Ming Std L' / >

  < name of font = "Adobe song Std L" / >

  < name of font = "Adobe Myungjo Std M" / >

  < / font >

  < / locale >

  < / Romagna >

  < xmlns: x x: xmpmeta = "adobe: ns:meta / ' x: xmptk =" Adobe XMP Core 4.2.1 - c041 52.337767, 2008/04/13-15: 41:00 ">" "" "

  " < RDF: RDF = xmlns:rdf ' http://www.w3.org/1999/02/22-rdf-syntax-ns# ">

  " < Xmlns:xmp = RDF" http://ns.Adobe.com/Xap/1.0/ "rdf: about =" "> "

  < xmp:MetadataDate > 2010-06-28 T 16: 04:04Z < / xmp:MetadataDate >

  < xmp:CreatorTool > Adobe LiveCycle Designer ES 8.2 < / xmp:CreatorTool >

  < xmp:ModifyDate > 2010-06-28 T 11: 28:54 - 04:00 < / xmp:ModifyDate >

  < xmp: CreateDate > 2010-06-18T 11: 45:23 - 04:00 < / xmp: CreateDate >

  < / RDF: Description >

  " < Xmlns:pdf = RDF" http://ns.Adobe.com/PDF/1.3/ "rdf: about =" "> "

  < pdf:Producer > Adobe LiveCycle Designer ES 8.2 < / pdf:Producer >

  < / RDF: Description >

  " < Xmlns:xmpMM = RDF" http://ns.Adobe.com/Xap/1.0/mm/ "rdf: about =" "> "

  < xmpMM:DocumentID > uuid:081329f3-4914-4dde-87ae-75a83da8434e < / xmpMM:DocumentID >

  < xmpMM:InstanceID > uuid:4d9ea5d0-fbf1-4be5-8aa5-b9c828a765e9 < / xmpMM:InstanceID >

  < / RDF: Description >

  " < Xmlns = RDF" http://purl.org/DC/elements/1.1/ "rdf: about =" "> "

  < dc:format > application/pdf < / dc:format >

  < / RDF: Description >

  " < Xmlns:desc = RDF" http://ns.Adobe.com/XFA/promoted-desc/ "rdf: about =" "> "

  < desc:version rdf:parseType = "Resource" >

  < rdf: value > 8.2.1.4029.1.523496.503679 < / rdf: value >

  < desc:ref >/template/subform [1] < / desc:ref >

  < / desc:version >

  < / RDF: Description >

  < / RDF: RDF >

  < / x: xmpmeta >

  " < xfdf xmlns =" http://ns.Adobe.com/XFDF/ "XML: Space ="preserve"> "

  < annots / >

  < / xfdf > < / xdp:xdp >

  Hello

  It is difficult to see the XML Source what is happening. There are sites like YouSendIt.com or Acrobat.com where you can download files from file sharing.

  In any case, I see the Add button, then the delete row button would look like:

  _Objective.removeInstance(this.parent.index);
  

  The underscore character is a shortcut for instanceManager. I suspect that the goal is the repetitive element. It is easier to include the button Delete a row in the repeating line, in this way the user can select which line they want to delete.

  There is an example here: https://acrobat.com/#d=tdpzltrl25yU2PkvgaQO9w

  Look in the click event of the button 'X '.

  Good luck

  Niall

• HOWTO remove near ContextMenu field

  I'm the substitution of makeContextMenu (ContextMenu contextMenu) to try to create my own context menu.  Everything works fine as I am able to contextMenu.addItem (_newMenuItem1) to add my menu items.  I have been unsuccessful in removing the menu CLOSE however option.  Any ideas?  Thank you

  The substitution of makeContextMenu allows you to customize the context menu items that are created from a field (copy, paste, Select, Option to change) and vary depending on the type of field and cursor location.

  The substitution of makeMenu gives you full control over the menu.  It's what built the entire menu of the screen, which is where the menu close item is populated.

• Removal of the dashboards in Foglight 5.6.4

  Hi all

  We need some dashboards should be deleted in the Foglight Console. When we tried to delete directly, it still takes too long to open the dashboard and also we have tried to 'Definitions' of the Configuration but no effect.

  Are there commands to remove the dashboard completely from the command prompt?

  Please share us articles or links that can help us...

  Thank you best regards &,.

  Guenoun

  Gokuinath,

  I guess you are not able to implement the action panel, then click on remove access, correct?

  In addition, you are connected to foglight administrator with privileges to developer cartridge, correct?

  I find the 68795 knowledge article that describes how to remove a dashboard of users by exporting a dashboard users, manipulate the exported information and then re-import a dashboard of users based on the information that is exported.

  Note: I recommend that you confirm with Dell support that the recommended steps will work in your environment to meet your needs.

  David Mendoza

  Foglight Consultant

• How to remove the email field in the contact form

  Hello

  I have a problem with the contact form widget must. When I import the widget on the site, I can't delete the email from the contact form field. How can I delete? By pressing the delete key, nothing happens, click on the blue icon appears select required, it won't let me...

  Any help on how to remove the e-mail form would be great.

  Hi Brad,

  Thanks for coming back. Yes by using other forms solves the problem, but the widget is so quick and easy. Pitty this field cannot be deleted.

  See you soon

• Can't remove the Manager field in AD by IOM 9.1

  Hello
  I'm removing the Manager for a user in the AD profile without changing the Manager ID in the profile of the IOM. I get error when I try to change the attribute Manager replacing a string NULL below.
  
  LDAP: code error 21-00000057: LdapErr: IDDM-OC090B8A, comment: error in the conversion of attribute operation, data 0, v1db1)
  
  
  I get the same error, even if I'm changing the Manager field in AD without changing the Manager field in the IOM.
  
  I try with the code below.
  
  BasicAttributes a = new BasicAttributes();
  at.put("Manager","");
  context.modifyAttribute(UserDN,2,at);
  
  What could be the reason for this error? Please help guys.
  
  Published by: User_OIM on December 27, 2012 19:06

  Create so first BasicAttribute object and then pass it inside the method could

  BasicAttributes a = new BasicAttributes();
  BasicAttribute ba = new BasicAttribute("manager");
  at.put (BA);
  context.modifyAttribute(UserDN,3,at);

• Create/remove instances of symbols with Youtube

  Hello

  I've searched high and low and have not been able to reach a solution to this, so I hope that the community can help.  I have a single file that has a video button to show and hide a video button. When the user clicks on the video display button, I would like to an instance of the video symbol should be created which shows a youtube video.  When the user clicks on the video button hide I want the instance to remove.  When the user clicks on the button display once again to create a new instance with the video youtube again.

  I'm trying to find a way to make the video refresh/reload when it appears on the screen, currently when I show/hide the video symbol, the film continues to play in the background.

  * Note * When I change "newVideo" of video in youtube embed code the video is displayed when you click the button, and another appears below it when it locks again, but when I remove the symbol 'video', he does not reappear when I click on the button display.

  Here is the code that I placed in each button:

  See the video:

  newVideo var = sym.createChildSymbol ("video", "Stage");

  newVideo.getSymbolElement (.css({))

  'position': 'absolute ',.

  'left': 30,.

  'top': 48

  });

  code to embed youtube in symbol

  YouTube var = $("< iframe/>");

  SYM.$("newVideo"). Append (YouTube);

  YouTube.attr ('type', ' text/html "");

  YouTube.attr ('width', ' 640');

  YouTube.attr ('height', ' 360');

  youtube.attr ('src', 'https://www.youtube.com/embed/MyFv6UKsW70?rel=0');

  YouTube.attr ("frameborder', '1'");

  YouTube.attr ('allowfullscreen', ' 0');

  Hide videos:

  sym.getSymbol("newVideo").deleteSymbol ();

  Here is a link to my zip of the project:

  http://www.capitalpress.biz/html5ads/YouTube/CreateDeleteYoutube.zip

  Thank you very much for your help!

  Brandon

  I figured out how to reset the video from Youtube to go underground with the response of Heathrowe and FigFrance contribution to the thread found here:

  https://forums.Adobe.com/message/4979969#4979969

  It is a more elegant solution than the deletion and recreation of the container every time. The secret has been adding. empty() for my video container.  Here is my button code works:

  
  

  See the video:

  code to embed youtube in symbol

  YouTube var = $("");

  SYM.$("video"). Empty(). Append (YouTube);

  YouTube.attr ('type', ' text/html "");

  YouTube.attr ('width', ' 640');

  YouTube.attr ('height', ' 360');

  YouTube.attr ('src', 'https://www.youtube.com/embed/MyFv6UKsW70?rel=0');

  YouTube.attr ("frameborder', '1'");

  YouTube.attr ('allowfullscreen', ' 0');

  Display an item

  SYM.$("video"). Show();

  Hide videos:

  SYM.$("video"). Empty();

  Hide an element

  SYM.$("video"). Hide();

  Brandon

• Problem with working with Add/Remove instance incorporating the checkbox

  I came into a problem I tried to understand since last week. I had searched on Google for some tips, but I can't find anything useful.

  Currently I have a table that has a button addinstance and removeinstance. The script for this work.

  What I'm trying to do is line starts in readOnly format and when I select a check box, a cell will become open (I have a table with 12 cells in a line and about 6 to 7 boxes which will open some cells). However, when I add an instance and one of the boxes is checked, the following line is always readOnly. How to target these certain cells? If I have a box checked and I add a new line... some these fields will be open to all cells in this column.

  If someone could help me, that would be great.

  [email protected] wrote:

  Thank you so much, Jono! It works perfectly, I just added an extra line of script to do exactly what I needed. I don't think I'd be able to do it without your help.

  Glad it worked! I wasn't too sure I could make it work myself, took a few tries moving things in the right order.

  With this, I have 1 last request if you could perhaps help us... I was wondering, there is a button to send e-mail in the personalized section... is possible to have the object to display a standard text as well as what a person gets into a certain text field?

  example: ask outgoing # --> (standard in all areas) [Text Field] --> (entered manually in the textfield object number)

  There quite a few threads covering that here, I have not tried playing with it, me.

  This one has a sample by Paul that has a bunch of different email options:

  http://forums.Adobe.com/message/2109201#2109201

  And it seems like he got a bunch of info:

  http://forums.Adobe.com/message/1356572#1356572

• How can I remove the search field in the new tab page?

  I just started to use the new tab by default FF page and want to remove the search box just above the tiles.

  Is it possible to do this without the help of CSS?

  You can hide the search bar and margins at the top and bottom with the code in the userContent.css file to get more space for the tiles.

  You can add code to the userContent.css file.

  • http://KB.mozillazine.org/userContent.CSS

  @-moz-document url(about:newtab) {
   #newtab-margin-top,
   #newtab-margin-bottom,
   #newtab-search-container { display:none !important; }
  }

  Customization files (Web sites) userContent.css and userChrome.css (user interface) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor like Notepad to create a file userContent.css (new) in the folder chrome (file name is case sensitive)
  • Paste the code into the userContent.css file in the Editor window
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userContent.css.
    Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userContent.css.txt file

• How to remove my address field of webb websites

  I want to remove the repetition number of webb addresses that appear when I type an address of a Web site that I have used before. The program seems to store all visits

  You can try to do it this way.

  1. Press CTRL + H to open the history in the sidebar.
  2. In the filter at the top, type the name of the site to delete.
  3. Click with the right button on the top and choose 'delete '.
  4. Delete the rest of the name by holding down the "Del" key

  You can also use these characters to isolate entries in the location bar: Search bar

• Ive found more than a hundred websites in my registory how to remove my laptop field sites and how they arrived there?

  Ive found on coal in my registory 100 web sites, I would like to know how they got there and how to remove them. "I have a lot of distance connects to my laptop that I don't know how to close", some websites in the programs, it has a password and why is there a password when I never put an on I know my boyfriend has something to with him cause, it has a locked user account and having the present rights please give me an idea what to do before I get rid of my laptop recommended xxx websites in the registory $ 600 million, I feel that I have no privacy please help. responses may be sent by e-mail to dinaallred@hotmail,com

  If you are unsure how this kind of content you obtain on your computer, it is better to assume that it is completely and carefully contaminated with unwanted software, viruses, spyware, or other such unpleasant things.  Check with your laptop manufacturer to see how to do a factory restore to destroy the computer and restore it if you "new factory".  Make sure that you back up files like photos, music, documents and other first because they will be gone once the system is cleaned and restored.

  Once he has restored put on user accounts and to limit access to people only trust you.

• Remotely, add and remove Instances of different pages

  Similar to my other post, I have a form that has several pages, one being a calculator (OA_CALC), which shows all the variables calculation; the second (OA_PG1), client side showing relevant information only. If the two tables should add/remove and display the data being controlled of OA_CALC. I am able to addInstance and source the date for two pages, but for some reason removeInstance only works on the page where the button is. So lines on OA_PG1 never remove, please advise.

  OA_CALC I have a button Add a LINE with the following code:

  Form1. OA_CALC. . Table1.HeaderRow #SubForm [0]. AddRow::click - (JavaScript, client)

  OA_CALC. Table1.RowItems.instanceManager.addInstance (1);

  OA_PG1. ProjectSavingsGROUP.Table1.RowItems.instanceManager.addInstance (1);

  and a LINE of DELETION with the following code:

  Form1. OA_CALC. . Table1.RowItems #SubForm [0]. DelRow::click - (JavaScript, client)

  vIndex var = this.parent.parent.index;

  OA_CALC. Table1:. RowItems.instanceManager. removeInstance (vIndex);

  OA_PG1. ProjectSavingsGROUP.Table1. RowItems.instanceManager. removeInstance (vIndex);

  One thing that I tried was creating buttons on OA_PG1 with the code specific to this table, which seemed to work. So I know that the syntax works, but can not understand how to control from another page. Help, please.

  Thank you

  Hello

  I have here an example that illustrates this behavior: http://assure.ly/eTOXaH.

  Hope that helps,

  Niall

• In REMOVED DB Blob field and save an image

  I need help. I have a db field 'image' of BLOB type and I save the contents to a file on a file local c: \ example.bmp.
  I found many examples
  BEGIN-
  Get LOB locator
  SELECT the image IN l_blob pc_immagini_blob FROM WHERE code = WCI;
  -Open the destination file.
  l_file: = UTL_FILE.fopen ("C: \ Temp ',' EXAMPLE.") BMP', 'w', 32767); -> error
  Pb is not local, but on an application server, the image must be saved in c: the customer. Help me??

  This might help you

  http://baigsorcl.blogspot.com/2010/02/storing-and-retrieving-images-Word.html

  http://baigsorcl.blogspot.com/search/label/WebUtil

• Can I remove the home field in VPIM message?

  the default greeing in the blind transfer VPIM is 'extension xxxx to domainname' but my client wants to play the extension only as 'extension xxxx' without the domain name. Is it possible?

  Thank you

  Hello

  Sorry, confirmation on a blind address is not configurable.

  Nancy