Remove text labels

Similar Questions

• How to send text labels to LabVIEW DIAdem?

  Is it possible to place text labels in a tiara of LabVIEW execution report? Let's say that by specifying its coordinates, text lable name and value? Thank you...

  Hi Chris,

  Yes, it is possible to place text labels on a report of LabVIEW to run using the same piece of code I linked to in your other post.

  In this case, you must change the table 2D with a new set of controls. The controls in VBScript are listed below.

  Call GraphObjNew ("FreeText", "Text4")
  Call GraphObjOpen ("Text4")
  '------------------- Text -----------------------------
  TxtTxt = 'Test '.
  TxtFont = «»
  TxtSize = 3
  TxtColor = 'black '.
  TxtColorRGB = 33554432
  TxtBold = 0
  TxtItal = 0
  TxtUndl = 0
  TxtStrOut = 0
  TxtFrame = 0
  TxtBackColor = «»
  TxtBackRGB = 50331647
  TxtBackRGB2 = 15263976
  TxtBackFMode = "Vertical".
  TxtBackFVariant = "from the bottom".
  '------------------- Position -----------------------
  TxtPosX = 36,47
  TxtPosY = 15,83
  TxtAng = 0
  TxtRelPos = "r-bot."
  Call GraphObjClose ("Text4")

  You will need to convert these to the VI.

  The conversion, you must follow is: where you have call replace you it with Cmd

  then call GraphObjNew ("FreeText", "Text4") becomes GraphObjNew ("FreeText", "Text4") cmd.

  and TxtTxt = 'Test' becomes Var TxtTxt 'Test '.

  ignore all lines starting by '

  for the first lines of the script are becoming as such in the table control.

  Cmd GraphObjNew ("FreeText", "Text4")

  Cmd GraphObjOpen ("Text4")

  Var TxtTxt Test

  Var TxtSize 3

  and so on.

  You can also ignore lines with = "" we need to remove the "" when we send Variables.

  Concerning
  JamesC
  NIUK and Ireland

  It only takes a second to rate an answer

• Is there a way to display text labels for the toolbar icons?

  Doesn't seem to be a way to display text labels in firefox 29.0.1. I get bored really what he does so much easier for me. Is it possible to recover?

  You are welcome.

  Yes, the classic theme restaurant is safe to use. Version 1.1.8 is completely overhauled, and there are currently more than 156000 users.

  In the FAQ of modules:

  Are safe modules to install?
  
  Unless it is clearly indicated otherwise, Add - ons available in this gallery have been checked and approved by the team of editors and are safe for the installation of Mozilla. We recommend that you install only approved modules. If you want to install untrusted modules or add-ons from third-party sites, be careful because these add-ons can damage your computer or violate your privacy. Learn more about our approval process

• With the help of button text label in case selector

  Hello forum members

  I have to use a digital button with labels of text instead of numbers:

  

  For better readability of the code I would use the text (not the value of the entire control) values in a structure of matter as a selector directly values. I could use the "[] labels text" or the "Digital displays [] well, if I could cast a ring or enum.

  The help of LabVIEW offers:

  Text [] property Dim labels hasPlayer, hasPlayer playerversion = false playerversion = 10 Do While playerversion > 0 On Error Resume Next hasPlayer = (IsObject (CreateObject ("ShockwaveFlash.ShockwaveFlash." & playerversion))) if hasPlayer = true then Exit Do playerversion = playerversion - 1 loop is_FlashVersion = is_Flash playerversion = hasPlayer

  If you want to create no sequential numeric values, use the Digital Displays [] property to get a reference to the display of text label then convert the reference to the class of the ring and use the property of string values and [of] .

  But I don't understand how to do the casting or if I am misunderstanding of aid.

  Does anyone have a suggestion?

  Thank you!

  Klaus

  

  

  Klaus M says:

  I now believe that it is not possible to use such a dial marked as a control of enum in food of a selector ' for text.

  Depends on what you mean by "as an enum. The text label can be connected on a box structure. You must manually set the element box selectors, however, for different cases you have. You cannot dynamically create the enum, if that's what you're fishing for. You can, however, have defined as typedef enum and cast.

• How can I remove text enhance my computer

  I need to remove text improve my labtop I don't know where it comes from, but it appears throughout the day

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• BB10 SDK 3 qnx.fuse.ui.text.Label issues

         textFormat.size = 22; //Added this in to change font size
  
          var lblText1:Label = new Label();
          lblText1.text = "Click \n on board to resume game";
  //      lblText1.wordWrap=true;
  //      lblText1.autoSize= TextFieldAutoSize.LEFT;
  

  Hello

  It's probably a noob question but... I made a PlayBook app a bit back and I try to update to use the latest version of the SDK so I can submit for BB10. I think putting the scale and working apart from the text.

  I went to import 'qnx.ui.text.Label' to 'qnx.fuse.ui.text.Label' and 'flash.text.TextFormat' "qnx.fuse.ui.text.TextFormat".

  After that, I could no longer use 'Label.wordWrap' and 'Label.autoSize. I also can't seem to get newline to work... the '\n' does not appear on the screen, but it does not put a new line. I also tried to use Label.htmlText to use
  instead of \n but it had the same problem.

  At this time the texts are of the correct font size (I went and added that in for everything), but I couldn't find a way to set wordWrap. Could someone please help me with wordWrap and as to why the line break does not work?

  Thank you

  -Muskilh

  You must add:

  lblText1.maxLines = 0;
  

• How can we add a text field on the stage, but without the text label?

  How can we add a text field on stage, but without the left text label by default?  I want just the field.

  I thought about it.  Go to the page layout palette and change the options of caption for the text box.

• The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem

  The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem if I'm updating from Acrobat X?

  You have the fonts installed in the system. This has not changed. (Having the police is not always enough, but it is certainly necessary).

• hide the text label in the section report IR under certain conditions

  Hello
  We have a textlabel and a calculated field in a section of report to the IR 11.1.2.1. Is it possible (in a script) to hide the textlabel and field based on certain conditions, like for example, if the field computes to 'zero '?
  Thank you.

  Use a field instead of the text label. In the Expression Editor you can use the function if() {} else {}

  HTH

  Wayne

• Using the list of my icon and ar text label does not align correctly!

  AS3: In the list of components my ar icon and the text label is aligned properly, when the application is started, the label text is on icon and when I put the mouse on any item in the list then alignment is ok. What's not here?

  That's when I test flash application:

  

  And when I put the mouse pointer on any element, the alignment of the icon and the label is ok! and it's like this:

  

  I do not understand where is the problem, please help! Here is the code:

  Stop();

  Import fl.controls.listClasses.CellRenderer;

  import flash.text.TextFormat;

  Import fl.controls.List;

  Import fl.controls.Slider;

  Import fl.events.SliderEvent;

  Import fl.controls.List;

  import flash.display.Loader;

  import flash.display.MovieClip;

  import flash.net.URLRequest;

  Import fl.data.DataProvider;

  initialization

  var imageLoader:Loader = new Loader();

  friends of the var: Array = [];

  var dp:DataProvider = new DataProvider();

  friends [0] = "icon/general.png";

  list.iconField = "iconSource";

  list.rowHeight = 40;

  list.dataProvider = dp;

  /////////////////////////////////////////////////////////////////

  Loading XML

  /////////////////////////////////////////////////////////////////

  var xmlData:XML;

  var xmlLoader:URLLoader = new URLLoader();

  xmlLoader.addEventListener (Event.COMPLETE, LoadXML);

  xmlLoader.load (new URLRequest("Media/materijali.xml"));

  function LoadXML(e:Event):void

  {

  trace (LoadXml);

  xmlData = new XML (e.target.data);

  function getValues(input:XML)

  {

  var xmlCategoryList:XMLList = input.children ();

  var point: XML;

  var intCount:int = 0;

  for each (item xmlCategoryList)

  {

  imageLoader.load (new URLRequest(friends[0]));

  imageLoader.scaleX = 0.3;

  imageLoader.scaleY = 0.3;

  dp.addItem ({iconSource:imageLoader, label: item.naziv, data: item.autor, data1:item.putanja, data2:item.opis, data3:item.mapa, data4:item.tip});})

  intCount = intCount + 1;

  imageLoader = new Loader();

  }

  } //end for function values

  getValues (xmlData);

  } / / end of loading XML

  /////////////////////////////////////////////////////////////////

  Start the function of list manager, itemClick

  /////////////////////////////////////////////////////////////////

  var varime, varautori, varurl_dok, varurl_opis, varurl_mapa, vartip:String = "";

  list.addEventListener (Event.CHANGE, itemClick);

  var opis_rada:URLLoader = new URLLoader();

  function itemClick(event:Event):void

  {

  XML podaci

  var ime:String = event.target.selectedItem.label;

  authorized var: String = event.target.selectedItem.data;

  var url_dok:String = event.target.selectedItem.data1;

  var url_opis:String = event.target.selectedItem.data2;

  var url_mapa:String = event.target.selectedItem.data3;

  Tip of the var: String = event.target.selectedItem.data4;

  varime = ime;

  varautori = allowed;

  varurl_dok = url_dok;

  varurl_opis = url_opis;

  varurl_mapa = url_mapa;

  vartip = tip;

  }

  fill your dataprovider after the icon loading is complete.

• remove the label text border control

  How to remove the border around the text of a control label?

  Thank you...

  Go to the tools Palette and select paint labels made Transperant once for a single label, you can just click on other labels to make transperant.

• Remove 'default' text characters when you add the new object text (label)

  Is it possible to create a new text object without characters 'text' on the inside?

  In addition, when you convert a rectangle to the text object, you the characters 'text' on the inside. Can you do empty by default?

  Tarek

  Hi Tarek,

  The text object is defined in a Text.xfo file, on my system, it is under C:\Users\BR001\AppData\Roaming\Adobe\Designer\10.0\EN\Objects\Standard.

  You can find the location by looking at the properties of the Group of the library of Standard objects;

  

  You can also create your own widget, set it up on the design finds out how you want and right click then 'add to library' (option has moved, but that's what SS3).  But I don't think you can get your own ones will appear in the drop-down list when you try to convert objects.

  Bruce

• If I don't have that one window without tab, how can I remove the label of the tab at the top of the window?

  OK, I open a window on my home page. In the upper left part of the window, I have the Firefox icon and next to it the name of the page that I am. Below that is the menu bar which I use enough to leave it there. And now, with no other tabs open, is a bunch of lable/tab tab / be it with the icon of Firefox and next to him, the name of the page, I'm on. Below that is the url/address bar which usually also shows the name of the page that I am.

  I like a clean screen with small footprint as possible. Usually, I know which window to page / I'm on because I'm the one who got me here. I have need a band to additional tabs for a window that has no open tabs take more space and tell me what I already know.

  If I could drop the icon of Firefox waste than any of the top of my screen that would be great, but I'm sure that's not an option.

  If I could put this menu bar on the same line as the address bar, I'd be in heaven to the space used effectively! But I'm also sure that that won't happen either.

  This new band/tab tab label if I know that does not need to be there because he has never been before until I opened a new tab and logically would then use for tabs.

  But, given that I don't like and I want not gone, I presume this means that it is new, because one or more persons thought redundancy is fun and there is no option to remove it either.

  Someone can give information me in places where my ignorance cause me to suffer here? Give back me my thumb at the top of my screen and I promise not to ask for a mile!

  Thanks to all who can / will help me.
  Much peace

  Did you try to uncheck the "always show the bar tab" checkbox in the options on the tab? See the tab preferences and settings.

• How to put a property group in a related curve with the Expansion curve text label

  Hello

  I'm working on a graph which trace a WaveFormChannel named 'Test '. Given that I enabled the expansion of the curve, the graph shows all channels named "Test" in the DataPortal. Now, I want to put the value of the property of the "MyGroupProperty" group in the legend, so whenever I add a new group, automatically add the new "Test" signal and show "MyGroupProperty" in the legend.

  So far, I tried to use the curve text in the option of the label, with something like this

  @GroupPropGet (GroupNumber, "MyGroupProperty") @, but I have to give the value of GroupNumber, and then it shows the same value for all signals. So if I add a new group to the dataportal with a Test string, the legend shows the label of the new signal, but the MyGroupProperty remains the same for all labels

  

  Thanks in advance for your help

  Hi dslemusp,

  You can use the global 'CGI' variable in a tiara expression to provide the current Index of the traced (even in expansion mode) group.  I've prepared an example that illustrates this and attached it below.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Histogram with text labels

  Histograms can be created in LabVIEW that have a digital number for the axis y and help text of the x-axis labels?  I want to be able to use the text to describe the bins on the x-axis.  You want to add names and not numbers to the x-axis.

  Simular to what they do here with tiara

  http://forums.NI.com/NI/board/message?board.ID=60&message.ID=7283&query.ID=598915#M7283

  Hi Matthew,

  The only solution for that Q (I know) is to use an image control to display text as I showed in this threadlabels.

  

  Ben