Remove the archivelogs and old backups

Similar Questions

• need to know how to remove the administrator and old password admininstator

  I bought an old lap top for sale yard is unable to make any changes until there are changes in administator to remove the old adminastraor and password even load my copy of xp

  Hello

  You can go to the link mentioned below if you have forgotten your password, or if it has expired:

  http://support.Microsoft.com/kb/321305

  You can refer to the city link below to install Windows XP:

  http://support.Microsoft.com/kb/978307

  I hope this helps.

• My backup is complete, so my computer is recommend I have remove some of my old backups

  my backup is complete, so my computer is recommend I remove some of my old backups, are my most recent backups Save this info also, I won't delete important information.

  Thank you
  C. MR. C.

  On Monday, February 6, 2012 15:37:44 + 0000, C. M. C. wrote:

  my backup is complete, so my computer is recommend I remove some of my old backups, are my most recent backups Save this info also, I won't delete important information.

  What you save up to? Are what program you using backup?

  You can read this article on the backup that I wrote: 'save '.
  "Your computer regularly and reliably" to
  http://www.computorcompanion.com/LPMArticle.asp?ID=314

  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Please reply to the newsgroup

• Satellite P205-S6277: can I remove the battery and plug the too?

  I'm working on my laptop Toshiba satellite P205-S6277, 80% of my time at home.

  Can I remove the battery and plug the power to a UPS backup system in order to make the longer battery life?
  I can load once a week.

  Of course you can do it. You can remove the battery and work on the power current only. Remember, there is no dust on the desktop and the location of the battery in the notebook of stay clean to be used again.

  Good bye

• How to remove the alarms and events database of Citadel?

  Hello

  I use LV 2010 with DSC.

  I made a mistake in my program and I wrote too much data event and alarm at the Citadel. Database *.mdf/*.ldf files are quite large > 1 G. Normally, I connect only two alarms per day. I want to delete all events alarm + data before a certain time of stamps for example. 1.1.2011. How can I do? I tried to use MAX and perform the operation so I wrote small program which reach the data from temporary database and then remove it. Yet I can find old events and alarms... I am able to remove the traces of old but not the events/alarms. How do I remove the alarms and events?

  Thanks, Jim

  Hi Jim,.

  Have you seen this:

  http://forums.NI.com/T5/lookout/how-can-I-delete-alarm-and-event-data-from-a-Citadel5-database/m-p/5...

  Not sure if it is valid with the current version, but worth it.

• Security How can I remove the copy and paste the files I used?

  Security How can I remove the copy and paste the files I used?

  I can't get rid of all the e-mail addresses I have copied and pasted.  No matter what I will always appear if I hit paste again.  This is a shared computer and I would rather not have my copy and paste the files stored on the computer, after that I quit.

  Thank you

  Hi Ron,

  You can copy or move information (for example, text and pictures) between files and programs using temporary storage called the Clipboard. The Clipboard is not visible, so even if you use it to copy and paste information, you never actually see the Clipboard when you do this.

  The Clipboard contains a block of information at a time. Whenever you copy information to the Clipboard, the old contents of the Clipboard is replaced by the new information.

  When you shut down the computer everything is stuck in the memory of the Clipboard is cleared.

  Please click the below mentioned link to get an overview of the clip board memory.

  http://Windows.Microsoft.com/en-in/Windows7/copy-information-between-files

  Answer please if you have any questions.

• T43 won't start, it must remove the battery and try again.

  T43

  2686 E7U

  My computer frequently not turn on, I have to take to HQ and main and ultrabay batteries, sit around for a while and try again and again. It never fails to start the computer in the end, but I'm also afraid someday that simply, it won't start. Currently, I decided to not turn off my computer, I just pause and restart from time to time. Stability wise it is solid, but I would like to address this issue before the end of my warranty and I don't want to be without my computer for a long time. This has been a recurring problem for much of this year.

  I don't have a working windows partition, I run ubuntu, so I wouldn't have enough to mess with resettlement of the bios unless it can really solve my problem. Information about the current bios

  1.29 BIOS version (1YET65WW) 21/08/2006

  Embedded controller 1.06

  The typical sequence looks like this.

  Computer is turned off and unplugged after a normal shutdown.

  I plug in the power adapter to the computer, and after a few seconds the Green battery light.

  I press the power button, the computer does not put away and the light / energy from the battery stop.

  The light on the battery even when I release the power button remains off.

  Next step is to remove the AC and my two batteries, wait awhile, plug it back and and cross my fingers. If does not turn on, go to step 1 and repeat.

  I sent it to lenovo and they replaced the motherboard, and which until now has seemed to solve the problem.  even got a new keyboard out of it, even if the keyboard is a little more clicky then old.

  called Sunday, got a box Monday, droped out of the box of DHL Tuesday, got my computer back on Friday.  pretty good, considering that he was sent to tennessee.

• Script to search for text and remove the hyperlink and characterstyle link which applies (back to normal)

  I need help with my script to search for text and remove the hyperlink and characterstyle link which applies (returns the normal text).

  I can't do either as I want.  I want the user to be able to type in a dialog text they want to search for, do search this text IGNORING case (case insensitive) and then for all instances that he find it, remove character styles that are applied to the (set to [none]) and delete the hyperlinks.

  My code seems to define the character style [None], when I click on the text and look at the window of character Styles, BUT all old styles (font color, underline) are always applied and removed not as I want.

  Also, I can't understand how to remove all of the old links.

  Here is my code:

  myDocument var = app.activeDocument;

  var noneStyle = myDocument.characterStyles.item ("[None]");

  var myFindVal = "";

  var myErrorText = "";

  var myErrorCount = 0;

  myDialog = app.dialogs.add var ({name: "search user submitted text and delete hyperlinks from objects found.", canCancel: true});

  {with (MyDialog)}

  {with (dialogColumns.Add ())}

  {with (borderPanels.Add ())}

  staticTexts.add ({staticLabel: "search and delete hyperlinks for :"}); "})

  myTextBox var = textEditboxes.add({minWidth:100});)

  }

  }

  }

  If (myDialog.show () == true) {}

  myFindVal = myTextBox.editContents;

  doSearchAndReplace();

  app.findTextPreferences = NothingEnum.nothing;

  app.changeTextPreferences = NothingEnum.nothing;

  If (myErrorCount == 0) {}

  Alert ("done! ("Part of the links have been removed for: '" + myFindVal + ""! "");

  }

  else {}

  Alert ("last error: '" + myErrorText + "' & number of errors:" + myErrorCount);

  }

  }

  myDialog.destroy ();

  function doSearchAndReplace() {}

  app.findTextPreferences.findWhat = myFindVal;

  app.findChangeTextOptions.caseSensitive = false;

  app.findChangeTextOptions.includeFootnotes = false;

  app.findChangeTextOptions.includeHiddenLayers = false;

  app.findChangeTextOptions.includeLockedLayersForFind = false;

  app.findChangeTextOptions.includeLockedStoriesForFind = false;

  app.findChangeTextOptions.includeMasterPages = false;

  app.findChangeTextOptions.wholeWord = false;

  var myFoundItems = myDocument.findText ();

  for (i = 0; i < myFoundItems.length; i ++) {}

  myRemoveHyperlinkAndStyle (myFoundItems [i]);

  }

  }

  function myRemoveHyperlinkAndStyle (myFoundItem) {}

  try {}

  myDocument.hyperlinkTextDestinations.item (myFoundItem) .remove ();

  myDocument.hyperlinkTextSources.item (myFoundItem) .remove ();

  myDocument.hyperlinkURLDestinations.item (myFoundItem) .remove ();

  myFoundItem.applyCharacterStyle (noneStyle);

  }

  {catch (MyError)}

  myErrorCount ++;

  myErrorText = MonErreur;

  }

  }

  Hello

  Right, some hyperlink might be a pageItem...

  expand the 'if' condition with:

  If (myHyp [len].source.hasOwnProperty ("sourceText") &... content ==...)

  Jarek

• Remove the height and width of the image in Dreamweaver.

  I recently updated a very old site and very large width fixed with a fluid design with new models.

  However, I still need to remove the width and height of the thousands of images in order to evolve properly. Is it possible that I can remove these attributes at once, rather than having to edit each frame by hand?

  However, I still need to remove the width and height of the thousands of images in order to evolve properly. Is it possible that I can remove these attributes at once, rather than having to edit each frame by hand?

  Suggest you make a copy of the site first in case you need to go back to the beginning

  I guess that the images are all hard-coded in the static pages, for example

  Find & replace in DW

  Find: all of the current Local Site

  Search: Specific tag = "img".

  With attribute = height = [any value]

  Action: Remove attribute height =

  Replace all

  Repeat for the width attribute.

• Remove the archivelogs with RMAN

  Hello
  
  I usually remove archivelogs with RMAN with command as ' ARCHIVELOG DELETE ALL COMPLETED BEFORE ' SYSDATE - 1' if I have to erase the archivelogs to free the space of FRA.»»
  
  My question is if I delete the archivelogs will it deletes the records in the catalog also (I think) so backed up on tape. In this case the catalogue is not information for these records even if they are on cassettes, correct?
  
  So in the case of collection how can I restore them?
  
  
  Thank you
  
  Published by: 822424 on May 15, 2011 19:28

  The catalogue contains information about the backups.

  Before you remove the archivelogs, I assume that you have done a BACKUP ARCHIVELOG (or with the database as a BACKUP database PLUS ARCHIVELOG DATA). Therefore, backups are in the BackupSets that are in the catalog.

  Hemant K Collette

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• How can I remove the footer and header view print?

  The function "file > config page" does not display the options to remove the footer and page header.

  This has happened

  Each time Firefox opened

  == I try to print

  If you want to remove the header or footer at all times (there is no user interface as in the layout under Windows or easily change) in Firefox under Linux, you can erase the preferences different values to get rid of both of them.

  Type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.

  Filter = header
  Each of these prefs right click and select Edit, then backspace or use delete to erase the characters - and then click OK.

  Repeat the same for the footer.

• Tecra A7: Is it ok to remove the battery and store it outside of the laptop?

  I took out the battery of Tecra A7 my wife so that it does not load and offload unnecessarily (laptop works exclusively on the sector).

  However, I read on the Internet that to take out the battery can sometimes be dangerous to its electronic components: namely, electronics no longer works correctly and the battery is considered to place in Notepad, as 'dead', even if this isn't really so.

  This can happen with my Toshiba battery, too?

  I did the same thing with my older Satellite P20. I put t see any problem here. But it is recommended to charge the battery and run the laptop on battery only from time to time. Charge the battery up and he sometimes empty. It's good for each rechargeable battery.

  I put t know where you found this info but believe me you can remove the battery and laptop can run on power only.

• How remove the date and time in image logging vision express

  I use express vision to capture a set number of images with the inline processing. I am opting to save images to a specified folder. However, the file names of the images have the date and time added by default. Is there a way to remove the date and time in the image file name? Help, please.

  Thank you very much. This has been useful. However I found another book about - I renamed it (using the movement vi) slam post files. Still, I would be interested if anyone has a better way to do it.

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.