Remove the check mark a ring or an Enum control
This was requested previously by others, but I've seen a complete response. For a control ring (or enum), a check mark appears next to the current item / selected when you open the menu drop down. Is there a way to remove the check mark? I would like to just a menu drop-down regular and unadorned.
A similar feature exists for context menus in LabVIEW using the terminal "checked" to the "Set Menu Item Info" feature. Is there something like this for the drop-down lists of the rings and enumerations?
I am aware that a combo box doesn't have these marks, but the drop-down list box is undesirable because it does not open the dropdown menu unless you directly click the drop down arrow. Think of almost any online form you had to fill out and you probably encountered a drop down menu like that I try to recreate, for example:
Thank you!
Never actually noticed this check until you brought it to the top! A hack that you might try is to change the drop-down list box control, so that the button that goes down the list covers all of the control. You can make transparent and "bring to front", so that if the user clicks on the box, the menu drops down. You can add a small triangle black, just to make it obvious to the user that it goes down.
Tags: NI Software
Similar Questions
-
I removed the check mark to "Accept cookies from sites" in the Privacy tab, but when I restart Firefox the check mark is back! This problem started with version 3.6 and so I upgraded to version 5, but the problem remains. Any suggestions?
Preferences are not saved
https://support.Mozilla.com/en-us/KB/preferences%20are%20not%20saved
Check and tell if its working.
-
To choose which pictures to import archive them or remove the check mark?
To choose which pictures to import from a folder I mark to import ot uncheck?
Remove the checkmarks of the ones you don't want.
-
After a recovery of the graphics system icons in Explorer have the ANNOYING blue and green checkmarks > into little squares at the bottom left of each icon.
How can I get rid of these?Norton backup status indicators,
http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/http://www.Winhelponline.com/blog/wp-content/uploads/Norton360-2.jpg
Mozy backup,
http://support.Mozy.com/support/mozyKnowledgeBase?docid=78225
http://support.Mozy.com/support/mozyKnowledgeBase?docid=77353Carbonite,
http://Carbonite.custhelp.com/app/answers/detail/A_ID/1344 -
Remove the quotation marks the names of channel
First of all - I'm new to tiara and VB so please forgive my ignorance!
I have a large data set containing several groups with the same names (or almost) in each group. For reasons not worth going in channel names have quoation marks around them, while others do not.
I'm trying to remove the quoation marks to standardize all channel names in groups, to do hoped to browse channels renaming groups as the case
I think it should work: -.
For
i = 1 to GROUPCOUNT
Call GROUPDEFAULTSET (i)
CN (""ChannelName"" "") = "ChannelName".
Next
ChannelName, where is the name that I am trying to replace, but I get the following error:-expected ')'
Can someone point out where I'm wrong?
(Note: I also tried to use triple quotes ('' ' ChannelName' ' "), but I get this error instead - CN (" "ChannelName" "" "): = ChannelName Close support" ") ("expected for the index fields)
Bonus points - how to get the loop jump over all groups where the channel that I'm already referencing isn't quotes in it, rather than giving me an error that the channel can not be found?
Thank you very much in advance for any help!
Dan
Hello Dan,.
You use the old syntax of script to manipulate the data. Please find below the current way to replace the double quotes with a underscote:
Dim iLoopG, iLoopC, oGroup, oGroupChns m²
m² = Chr (34) "character".
Set oGroup = Data.Root.ChannelGroups
iLoopG = 1 to oGroup.Count
Set oGroupChns = oGroup (iLoopG). Channels
iLoopC = 1 to oGroupChns.Count
' msgbox oGroupChns (iLoopC). Name
oGroupChns (iLoopC). Name = Replace (oGroupChns (iLoopC). Name, m², '_')
next
next
Greetings
Walter
-
How to prepare a PDF file to fill out so that the check marks appear in the document printed?
I use the XI player a to fill out IRS form that contains check boxes in order to answer the questions. I can see the checkmarks in the boxes in the registered version of my document. However, when I print the document, the check marks do not appear. Can someone help me with this problem?
I don't know - I have never seen anything like this. You evolve somehow printing output, for example a document smaller than the form was designed for?
-
I can't change the color of the check mark character
I use Adobe Acrobat XI. I open the Annotations Panel and I'm trying to change the color of the thumbnail of the checkbox. If I click with the right button on a stamp of check and go to properties then I can see a place to change the color on the appearance tab. However if I change the color then I do not see the change comes into force on the box. If I change the opacity so I do not see the change. I have also noticed that if I resize the check mark so I can't do the new default size even if I check the boxes ' to default properties ' or 'locked '.
Hi Johnny,.
You cannot change the color of a stamp: stamps selected the colors that are used for a stamp designer. You will feel that you can change because there is a selector of color on the properties bar when you select a stamp. This color is however only for the popup note that is associated with the patch and not the stamp itself.
Stamps come always to 100% of their size. You must create a new dynamic stamp to your desired size.
Kind regards
Rave
-
How to get the position of a ring in a tree control?
Okay, this is probably a stupid question, but how can we get the position of a ring within a tree control? I have a tree with two columns, with rings in the second column. I can set the position using SetTreeCellRingValueFromIndex(), but how do you get the position once the user has changed the control? I found the functions GetTreeCellRingIndexFromValue() and GetTreeCellRingValueFromIndex(), but I have not found a way to get the Index or the value of the ring (I'm looking for is the index, but if I can get the value I can from there). Thanks in advance!
You can get the value of the cell in the tree of GetTreeCellAttribute (ATTR_LABEL_TEXT). Then, as you noted, you can use GetTreeCellRingIndexFromValue() to get the index.
I hope this helps.
-jared
-
After loading the photos from my camera CF card, all of the icons in the photo folder had a green square (rounded corners) with a check mark in the place. How can I get rid of these green squares? That it does not obstruct many of the icon so that I can't tell what the image is in some cases. Tonight I loaded photos on a flash drive, and they had blue squares, covering part of the icons with > in the blue boxes. I would like to get rid of these also.
DonB41
After loading the photos from my camera CF card, all of the icons in the photo folder had a green square (rounded corners) with a check mark in the place. How can I get rid of these green squares? That it does not obstruct many of the icon so that I can't tell what the image is in some cases. Tonight I loaded photos on a flash drive, and they had blue squares, covering part of the icons with > in the blue boxes. I would like to get rid of these also.
DonB41
==========================================
Looks like you can see the backup status indicators:See for example the following link...
Norton 360 backup status indicators:
http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/ -
Remove the quotation marks correctly
Hello world
I'm dealing with an embarrassing problem with quotes: I the JSON string with double quotes inside which causes incorrect analysis. So I want to remove them completely. I used
result_text = result_text.replace('"', '\"');
but no change. I searched a bit and found that people use replace (String, String) so that I can see that a single manufacturer with characters. General - how you would remove double quotes in a string?
Thank you I looked in this class, can be useful in some cases.
I also tried http://supportforums.blackberry.com/t5/Java-Development/String-Manipulation-split-replace-replaceAll..., nice solution
and to cut it short - my problem with json happened to be away from quotes. I haven't worked with json parser before and attempted to get the null value. Now I analyze
-
I have all of a sudden the green boxes with checkmarks in them appearing on all my images when you use Explorer to view the files, what are they, where they coe, how can I disable the as they are large enough to identify a difficult image.
These sound marks as those put in by your backup application to indicate that the file has not been changed since the backup was made. Look in your backup application to see if you have the option to turn off these indicators.
-
Hello
I activated the LSI user o auditing by
SELECT AUDIT TABLE, UPDATE TABLE, INSERT TABLE, DELETE THE TABLE BY LSI BY ACCESS;
the audit develops much and I need to remove select audit table. How can I do this?
I have tried to adjust once more without "select."
UPDATE OF AUDIT TABLE, INSERT TABLE, DELETE THE TABLE BY LSI BY ACCESS;
but it did not work.
Radoslaw -
Girard &; amp; game information on the check mark embeded in DataGrid
Hello!!
I have learn to render a checkbox in a DataGrid column...
I do it dynamically with this code:
var myRenderer:ClassFactory = new ClassFactory (ActionScript.ExtremeCheckBox);
myRenderer.properties = {selected: value};
myDB.columns [my_col] .itemRenderer = myRenderer;
But how do I get and set variables in the box?
There are no clues in my dataprovider on the box...
they are only ArrayRenderer, but are locked!
Can you help me? : )
"123qweads" wrote in message
News:g82dnb$gcd$1@forums. Macromedia.com...
> Hi!
> I have learn to render a checkbox in a DataGrid column...
> I do it dynamically with this code:
>
> var myRenderer:ClassFactory = new
> ClassFactory (ActionScript.ExtremeCheckBox);
> myRenderer.properties = {selected: value};
> myDB.columns [my_col] .itemRenderer = myRenderer;
>
> But how can I get and set variables in the box?
> There are no clues in my dataprovider on the box...
> are in ArrayRenderer, they are locked.http://www.returnundefined.com/2006/11/creating-truly-reusable-renderers-with-ClassFactory
-
How can I remove the requirement of connection to the mode "sleep"?
I open Sys Pref and removed the check mark for the connection after an hour of sleep or screen saver begins and password request keeps happening when I opened the iMac after more 1 hour of downtime.
> System Preferences > Security & privacy
Click the general tab
deselect 'Require password x Minutes after the start of the screensaver or to sleep'
Click on "deactivate the screen lock.
-
How can I remove the pop-out asking me to remember a password or not?
I don't want to save the passwords for the sites that I visit regularly. Whenever I log in, Firefox ' you want to remember. "thing out.
I keep clicking on "Never for this site" and Firefox continues to ask that whenever I connect? Why? I thought when I clicked "Never for this site" never means "for this site.
How can I make Firefox remember that I don't want this saved password?
Remove the check mark: Tools > Options > Security: passwords: [] "Remember passwords for sites".
See also Password - Manager do not forget, delete, modify and import passwords saved in Firefox
Maybe you are looking for
-
Can I use replicator or docking station with M45-S355?
Please I could buy dockstation or Replicator for this laptop? I couldn t find any information about it. Thank you.
-
iPod Classic 80 GB load computer
Hello I have an iPod Classic in 2007 and until now, it was perfect. But the last few days I saw that my iPod load of the computer. All of my adapters and cables are original from Apple and I tried all combinations between my son and adapters, but I c
-
I have the error code: / disabled system /: 71827459 Can someone help me with an unlock code for it? I'm completely locked! Thank you inadvance.
-
See above
-
Try to upgrade to win 7 64 Pro to Vista Home Basic 32
Get this message: this version of the file is not compatible with the version of Windows that you are running. Check your computers information to see if you need a version x 86(32bit) or 64(64bit) x.