remove the effect ar on my phone icon

Similar Questions

• How can I remove the silent mode when my phone is locked

  How can I remove the silent mode when my phone is locked?

  Settings - do not disturb = Off.

• How to remove the effect - brightness, from there?

  

  How to remove the effect - brightness, from there.  First of all I thought to increase the sound volume using the BRIGHTNESS of the effect, but now improved Audio, I use the volume, which is enough.

  So I would remove the block of brightness from there.

  Thank you.

  The brightness setting should not have any effect as you turned it off.  .  .  the blue square is not lit.

  However, if you don't like the look of it sitting there, highlight as I did it and press the DELETE (backspace) key to make them disappear.

  

• How can I remove the large green battery and plug icon?

  How can I remove the large green battery and plug icon? It seems pretty ugly and useless. There is already an icon of battery-plus-card used to determine the level of battery and charging status...

  Moderator edit: matched subject to content.

  Hi thang_nguyen!

  Another alternative is to double-click the battery icon and when Power Manager opens, click on Advanced Options > Options and uncheck the box "see the gauge of Power Manager in the bar then apply stains.

  To access the Lenovo Power Manager when the gauge of Power Manager is disabled, right-click on the Windows icon / energy from the battery in the bar of tasks and you should see "Power Manager".

  I hope this helps!

• How can I remove the background color of my desktop icons & fonts?

  Please help me to remove the background color of my desktop icons & fonts?

  If you want, I can send you a picture of screen printing.

  Concerned,

  Sainaba TK

  See if the following article solves your problem:

  "How to remove the background color of the icon on the desktop.
    <>http://www.geekyard.com/OS/Windows/how-to-remove-desktop-icon-background-color/ >

  HTH,
  JW

• How to remove the "sent from my Samsung phone.

  Is there a way to remove the "sent from my Samsung phone" at end of email so it does not print on another page of photo paper after printing the image

  You must remove the signature configured in the settings of e-mail to your mobile device.

  I guess it must be the same as the procedure below:

  Bring it application Android "E-mail address", up the menu, then select options or settings.

  An option will be 'signature' Select it and that is the source of the message.

  Just delete it and have no signature or replace it with any text you want.

  If you unable to locate him, I believe that your mobile service provider will be able to provide you with the exact measurements.

• Remove the effects of training of slider Windows 7 using a graphic tablet

  I recently bought a HP Pavilion p6-2260ea PC with Windows 7 and Adobe Creative Suite CS6 to use with my Wacom Intuos 3 tablet.  It seems to be a bit - spoke about problem that Windows 7 highlights some rather irritating effects of return of pen in the form of wavelets animated that eminate from the cursor when using the Wacom tablet.  I was able to change the settings of the tablet in the control panel to disable the "click and hold right click =" effect, but by removing the effects of return of ripple/pen themselves are proved to be much more complex.  It seems that I need to change the registry key by adding a new line of turning off pen feedback, or change something in the "Local Group Policy Editor", whatever it is.  Apparently I access it by running "gpedit.msc" - my computer doesn't seem to have this file on it!

  Anyone know how this problem can be solved and be able to explain it to me in simple terms?  I'm not an expert in computers and would require a solution step by step in detail.  I very much hope that this can be resolved.  I have spent a lot of money on a new PC shiny with a beautiful HD display great to use a package of Adobe very expensive to do my work, and I find that pesky Windows 7 has a daft feature that means tablets are as useless for actual drawing!

  Adobe have been useless and not forbear (surprising really, you would have thought the use of the Adobe on Microsoft PCs with a Wacom tablet would be a fairly common combination they would have answers to problems with Windows 7!).  A forum for Microsoft told me

  "Group Local 1) open the policy editor: run... gpedit.msc.
  2) access cursor components - Tablet PC - Windows User Configuration - model of administration.
  "(3) the setting of pen input, turn to" which is useless because I don't seem to have a Group Policy Editor locally on my PC.  A forum for Wacom spoke about changing the registry key, but not sufficiently clear, and so far I have had no success.

  Can anyone on the HP forum troubleshoot?

  Yours hopefully, etc..

  Hello Toastcartoons1,

  You spoke of this thread of responses Micorsoft?

  Feedback: Dynamic Pen in Windows 7, cannot turn off

  If he had more than a few suggestions in the list that I'm not sure if you've tried or not

  The first modification of the service to say that it runs

  -> Panel-> administration-> Services tools scroll Tablet PC Input service (not TabletServiceWacom)-> Service Stop.

   

  
  The second was to change the program to prevent it from launching

  Now, I think, I'm finally rid off them, I hope at least.
  I turn off the wisptis.exe which can be found under Windows\system32... and I renamed it to wisptis.exe_ so it is not start again. This makes the trick for me, so far...

• 'remove the effect' missing right click the tab

  Hi, when I right click on a clip to bring up a tab that contains a list of options is now missing for option 'remove the effect '. If someone could help me get the effect 'delete' in the right click tab, I would be very grateful.

  Deleting attributes called now, all the way up.

• Remove the effect of a movie clip nested in a multi-cam sequence?

  This might be (and I hope is) a question with several solutions.  I worked on a wedding ceremony and cut it into editing multicamera.  I have finished all touching up and am ready to send to will coloring, but I got a little carried away and had done some color work in first Pro CC with the Lumetri Looks.  I can't understand how unnest sequence clips and remove the effect or find the effect of the nested element.  I'm also curious to know if this would even transfer at will through XML, and it's really not worth you worried about?  Color will probably be something similar to what gave me Lumetri, but I'd rather have done with more detailed ranking checks. 

  As a question, is possible to unnest a sequence but keep multicam editing?

  Press SHIFT + F when, in the multicam sequence.  Who will open the sequence of origin on the same chassis.

• Removing the effect of the form

  once with the help of pucker and inflate to a form, how do I later remove the effect and return the form to the way it was before the applied effect?

  Thank you

  If you apply an effect to a shape, this shape became a complex aspect. Select the shape, and then click the button 'clear appearance' at the bottom of the appearance Panel. This removes the contraction of the effect and inflate.

• How can I remove the subtitles on my Windows phone for watching movies

  When I watch movies on my windows phone how do you remove closed captioning

  Hi Tarek,

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your phone?

  Thank you for your query details.

  I also appreciate the fact that you want to remove the subtitles while watching movies or videos on your phone.

  You can Customize video captioning by referring to this article and check.
  Reference:
  Accessibility on my phone
  https://support.Microsoft.com/en-us/help/10664/Windows-phone-accessibility-on-my-phone

  However, to remove the closed captioning, you can consult this discussion and check if it helps.
  https://social.msdn.Microsoft.com/forums/en-us/48b027d7-5ffb-4CD6-8F6A-981489cc984b/remove-closed-captions?Forum=winappswithhtml5

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Select reverse and remove the effect from Photoshop to Illustrator

  Hello

  I'm new to Illustrator and do my best to understand how it works! I'm used to working with Photoshop and there are some things that I could do it on Photoshop and am now trying to find a way to make it look as I want... So here goes

  I'm looking to have this effect on Illustrator. (For those who you don't see the image, mimage is a globe with the text that appears only on continents. The text disappears when the image is empty. I forgot to save it as a png, but white is transparent.

  

  I managed to write my text in Illustrator and change the text to "Color Burn" effect, so that it looks the same on all continents. However, I am unable to remove the text where it leaves the other layers. The text remains black where the background is transparent.

  

  So I was wondering if there is a way to remove the text outside the continent. The same effect, you should achieve in Photoshop by selecting reverse and removing the text (pixelated).

  Make a copy of the shape of the continent. Select the copies, and then choose the command object > path > make a compound path.

  Then use the new compound path as a clipping on the text mask. With her before she and the text and the text selected, choose object > path > make a clipping mask.

• Add/Remove the effect with CSS

  Hello

  I'm trying to implement some sort of entry in my application validation. I expanded TextField to accept only the entry with a number of characters and corresponding to a regular expression. When the regular expression match falls, I want textfield to have an innershadow, and he does. However, the effect is not removed when I remove the CSS class where this effect is defined.

  setOnAction(new EventHandler<ActionEvent>(){
              @Override
              public void handle(ActionEvent e) {
                  if(!getText().matches(restrict.get())) {
                      getStyleClass().add("invalid");
                  }
                  else {
                      getStyleClass().remove("invalid");
                  }
  
                  for(int i=0; i<getStyleClass().toArray().length; i++) {
                      System.out.println(getStyleClass().toArray()[i]);
                  }
              }
  

  .text-field.invalid {
      -fx-border-color: indianred;
      -fx-effect: innershadow(gaussian, indianred, 5, 0.5, 2, 2)
  }
  

  The style class "invalid" appears in the table when the entry is not valid. The class is removed successfully, but not the effect. How can I fix it? Do I need to set the effect in code and no CSS?

  Have you tried this:

  .text-field.invalid {
      -fx-border-color: indianred;
      -fx-effect: innershadow(gaussian, indianred, 5, 0.5, 2, 2)
  } 
  
  .text-field {
      -fx-border-color: indianred;  // change to some other color maybe transparent or use null
      -fx-effect: null
  } 
  

  Could be he you pls tell me how to use the CODE tags.

  Post edited by: jojorabbit

• How to remove the effect of movement

  Still trying to grip with 4 elements, and I thought that take advantage of the extra resolution on some HD footage that will end up like SD and set up some zoom and pan on video by using keyframes.  For example I would set up two key frames that are a picture apart (& B) where A is full frame and increase the scale on B and set the position (so it cuts to zoom in view).  I would then set up another pair of keyframes 10 seconds later (C - D) with the C with the same magnitude than B, but in a different position in the frame.  First adjusts the positions of middle managers between B & C linearly so he pans, then to D I restores the position and scale of the full view framework.

  I had a lot of fun with that until I had a hard time, and I'm really struggling to eliminate the effects.  Remove keyframes does not seem to work, or not creating keyframes with identical settings on part of the section.  I must also admit that I saw a trail drawn on the screen in the offending section and tried to compensate by dragging (big mistake), so now I have a weird pot in the middle of everything that for awhile, was funny, but now...

  Help, the forums and google didn't find anything either, and I don't know how to set each image individually is not the answer, so guidance would be welcome.

  Thank you

  Andrew

  Andrew,

  In the pre 4, there is an "eyeball" next to the Motion. That switches the Effect ON and OFF. That should clear things up.

  It is a task where I really like PrPro better, in which he has a miniTimeline with all the effects shown (maybe scroll), so that you can align keyframes perfectly to effect, as in AfterEffects. Now, maybe that this was added to the pre 8?

  Good luck

  Hunt

• Cannot add an effect (crossed circle) but can remove the effect first Pro CS6 v6.0.0

  I added a few video transitions chained by dragging them to my clips on my calendar.  But now I'll add them to other items (even at the other end of a clip that has already one) and I see the icon of "circle with a line through it" next to my icon 'hand' whenever I try to catch an effect.  If nothing is entered, and nothing can be moved.

  I tried to remove a few Cross dissolves and I could do it, but cannot add their return.

  Ideas on how to fix?

  Try to reset the preferences and the media deleting the cache files.