Remove the erroneous names of face

Similar Questions

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names.

  * Original title: file names of photos of Deletig Windows after emptying the file

  I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names. How can I delete the file names?

  Right-click on the name of the image file, then choose 'delete '.

• What should I do to remove the user name of the saved list when I connect

  What should I do to remove the user name of the saved list when I connect

  I think maybe he's talking about the list that is displayed when you connect to a web mail service. It shows several previous usernames used. How to remove one of them from the list?

• Remove the file name characters when exporting to file

  Hi all

  I worked with Silly-V , which has been extremely useful in creating a script to automate creating files in Illustrator.

  What I need help with now is the ability to add in this script, the ability to remove "x #" character of a filename on export. This would be ideal, as it will completely automate what I did by hand for months.

  The current script, that we have put in place takes generally, which would take me about 1 minute per file and it has reduced to 10 seconds. Translate this in the whole of the need to treat roughly 800-1 000 files, and you can see where the time invested is decreased significantly.

  The last piece of the puzzle is the removal of characters from ONE of the two files that are created through this script.

  First of all, this is the current script. It seems to work perfectly for what I ask it to do.

  #target illustrator-19  
  function test(){  
    
    
    var folder_1 = Folder("~/Desktop/Header CAD");  
    var folder_2 = Folder("~/Desktop/Clean CAD");  
      
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;  
      
    function revealAllLayers(doc) {    
        for (var i = doc.layers.length - 1; i >= 0; i--) {    
            doc.layers[i].visible = true;    
        }    
    };    
    
    
    
    
    function hideLayer(doc, name) {    
        doc.layers.getByName(name).visible = false;    
    };    
    
    
    
    
    function exportMyPng(dest, doc, props) {    
        if(props.hasOwnProperty("antiAliasing")){    
          switch(props.antiAliasing){    
            case "ARTOPTIMIZED" : {    
                app.preferences.setIntegerPreference("plugin/PNGFileFormat/AntiAlias", 1);    
                break;      
            }    
            default : {    
                break;    
            }    
          }    
        }    
        var pngOpts = new ImageCaptureOptions();   
        pngOpts.antiAliasing = true;   
        for (var all in props) {    
            if (pngOpts.hasOwnProperty(all) && all != "antiAliasing") {    
                pngOpts[all] = props[all];    
            }    
        }    
        doc.imageCapture(File(dest + "/" + doc.name.replace(/\.\w+$/, props.extraStuff + ".png")), doc.visibleBounds, pngOpts);    
    };    
    
    
    
    
    var doc = app.activeDocument;    
    revealAllLayers(doc);    
    hideLayer(doc, "Materials");    
    hideLayer(doc, "Detail Artwork");    
    exportMyPng(folder_1, doc, {    
        transparency: false,    
        antiAliasing: "ARTOPTIMIZED",    
        resolution: 300,    
        extraStuff: "_header"
    });    
    
    
  
  
      
    hideLayer(doc, "Header");    
    exportMyPng(folder_2, doc, {    
        transparency: false,    
        antiAliasing: "ARTOPTIMIZED",    
        resolution: 300,    
        extraStuff: ""
    });    
    
    
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);  
    
    
  };       
  test(); 
  
  test(); 
  

  I found the program Name Mangler done an exceptional job of the completion of the task of renaming. Here's a screenshot of what I'm asking for looks like with this program.

  

  My ultimate goal is to be able to integrate this unique Name Mangler feature the existing script I posted above. Now, the problem is that I need ONLY to assign the file created by the section of the lines 66-71. As you can see, I need to remove the file name starting at the index of 14 characters.

  Is it possible and something that anyone can help with?

  Thank you in advance!

  Brooks

  Whew busy days!

  Well, I got this here:

  #target illustrator
  function test(){   
  
    var folder_1 = Folder("~/Desktop/Header CAD");
    var folder_2 = Folder("~/Desktop/Clean CAD");   
  
    app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;   
  
    function revealAllLayers(doc) {
        for (var i = doc.layers.length - 1; i >= 0; i--) {
            doc.layers[i].visible = true;
        }
    };     
  
    function hideLayer(doc, name) {
        doc.layers.getByName(name).visible = false;
    };     
  
    function exportMyPng(dest, doc, props) {
        if(props.hasOwnProperty("antiAliasing")){
          switch(props.antiAliasing){
            case "ARTOPTIMIZED" : {
                app.preferences.setIntegerPreference("plugin/PNGFileFormat/AntiAlias", 1);
                break;
            }
            default : {
                break;
            }
          }
        }
        var pngOpts = new ImageCaptureOptions();
        pngOpts.antiAliasing = true;
        for (var all in props) {
            if (pngOpts.hasOwnProperty(all) && all != "antiAliasing") {
                pngOpts[all] = props[all];
            }
        }
        doc.imageCapture(File(dest + "/" + doc.name.replace(/\.\w+$/, props.extraStuff + ".png").substr(props.charsOffStart)), doc.visibleBounds, pngOpts);
    };     
  
    var doc = app.activeDocument;
    revealAllLayers(doc);
    hideLayer(doc, "Materials");
    hideLayer(doc, "Detail Artwork");
    exportMyPng(folder_1, doc, {
        transparency: false,
        antiAliasing: "ARTOPTIMIZED",
        resolution: 300,
        extraStuff: "_header",
        charsOffStart: 0
    });     
  
    hideLayer(doc, "Header");
    exportMyPng(folder_2, doc, {
        transparency: false,
        antiAliasing: "ARTOPTIMIZED",
        resolution: 300,
        extraStuff: "",
        charsOffStart: 14
    });
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);   
  
  };
  test();
  

  This one has a new parameter "charsOffStart" that you have to stick in your two-functions for the economy, and it will be lop however much from character now!

• Need to change or remove the user name?

  Hello

  I have created a username of support or forum for the community and was signed to automatically by using the ID of the evil of apple.  Remove the current user name?  If I change it very well, but deletion is also an option if I can create a new one.  None where the Web page asked me for the apple ID.  Just sign me somehow.

  Hello

  I noted your request to the Apple moderators.

  It may be a day or two before they can help. Be patient.

• HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

  Hello

  I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

  -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

  -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

  However, during the startup the company name is still displayed on the top of the screen... :-(

  (1) how can I change this text to start or remove it completely?

  (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

  Thanks in advance,

  SJW

  PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

  Hello

  I managed to change the line of text with the BiosConfigUtility64.exe.

  With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

  Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

  Best regards

  SJW

• How can I remove the full name of the computer in my house windows basic.why that my system shows me on the field?

  I have a laptop computer HP with windows vista. My system shows that it is on the field.

  As I didn't join field that I don't know why he's on the field. I won't be on the field.

  so I want to remove the full computer name. How can I do so.

  Hello

  ·         When you connect to the internet from?

  ·         How do you know if your computer is on the field?

  ·         Is this a brand new computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Try it, you can select a network connection and remove it from the network and sharing Center. This should allow to forget any field that you could connect the computer.

  Method 2:

  If it is a brand-new computer nine try to reformat to get all the information system back to factory settings.

  Note: save all the important documents first.

• remove the administrator name and password

  cannot update or download programs. pop up States 'type admin name'... but the area type in 'GRAYED OUT' help!

  If you had only an administrative user account and it is him that you damaged, all is not lost. You want to allow the built-in Administrator and create a new administrative user by general recommendations for the establishment of user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to log on to the built-in Administrator account.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• How can I remove the file name of movies that I import from my camera?

  How can I remove the filename of movies that I import from my camera - the film shows the name of the file on the screen and then disappears slowly?  Using Win 7 Pro and Home premium 64-bit.   Thank you.

  Edition - shows only upward on one of the 2 computers I have / use.  Any movie file I import was that if camera, animation or imported from youtube.  All formats - slight differences in size, fonts and the location.

  Hi and thanks... Videos out of my camera I'm just drag and drop to the desktop.  They are avi - cam is a Canon about a year.  Others are .mov of 3D software I use - Cinema 4 d. I save animation software in the appropriate folder.   Youtube videos are made with YOutube Video Downloader and files are for most .flv but others come too.

  All of these files open when doubleclicked and the name of the file is very large print at the bottom of the screen may be 4 seconds then fades.  I've not edited somehow - they are the first "raw" video camera or animation software.

  It is not consistent, but especially it happens only on one machine - Win 7 Pro with all the updates.

  Thank you.

  ========================================
  I suspect the media player you use poster
  the file name. Check the properties/preferences of your
  Media player to see if you can change a setting.

  For example, VLC displays the name of the file... and you
  can go to... Tools / preferences / All / video...

  Scroll down to and uncheck 'Show Media title on Video'... / Save.

  The next time that VLC is started the video title should not be displayed.

• How to remove the popup name & Email 9 Captivate?

  I'm looking for the answer to this already for a few weeks now, there are a lot of positions, but only a few real answers so I hope you guys can help me. I'm coding (in PHP) an LMS in-house using Adobe Captivate 9 where the results of the quiz are displayed in "internal server". It works well and I changed the InternalServerReporting script by default, so it doesn't push the results of our database so we can use them in our administration console. Each user who take a course must connect first if we already know the name and e-mail address of this user, but always at the end of each quiz, Captivate gives the popup where it asks to enter the name and address of the user by e-mail: A few months ago, when I was still with Captivate 8, I found a post somewhere (unfortunately, I can't remember where) notes 1 setting that you can change (not in a menu, it was more in an ini file or the registry key, and as I remember not even in the project, but more in the installed software) and that did the trick. Now I upgraded to 9 Captivate and the same returns but can not find this fix more. Someone may know how to get rid of this popup in Captivate 9 or even where to find the original answer I found months ago? Thanks Micha

  The pop-up window is displayed because Captivate doesn't know all the details of the student, however it needs to display the results.

  Stores to capture these values in the variables (e-mail) cpQuizInfoStudentID and cpQuizInfoStudentName (by name) and you can pass these through the URL that you use to start the course:

  Instead use the link, you can use , it did completely remove the popup and view the results immediately after the last answer.

• Anyway, to remove the column names in the result of the query of SQLPLUS

  Hello
  
  I am using sqlplus to run a script that returns results with the column names.
  
  Anyway is to omit the names of columns in the result of the sqlplus query?
  
  I would like to have only results with their column names in the output.
  
  Thanks in advance!

  Hello

  Maybe your LINES (IZE) is not defined?

  SCOTT>set lines 130
  SCOTT>select status, machine, module
    2    from v$session
    3   where upper(username) = 'SCOTT';
  
  STATUS   MACHINE                                                          MODULE
  -------- ---------------------------------------------------------------- ------------------------------------------------
  INACTIVE PFAE3\VPC4894-03                                                 TOAD 9.7.2.5
  ACTIVE   PFAE3\VPC4894-03                                                 SQL*Plus
  
  2 rows selected.
  
  SCOTT>
  

  As an alternative to the linesize parameter, you can format the columns:

  SCOTT>set lines 80
  SCOTT>col status for a8
  SCOTT>col machine for a30
  SCOTT>col module for a30
  SCOTT>select status, machine, module
    2    from v$session
    3   where upper(username) = 'SCOTT';
  
  STATUS   MACHINE                        MODULE
  -------- ------------------------------ ------------------------------
  INACTIVE PFAE3\VPC4894-03               TOAD 9.7.2.5
  ACTIVE   PFAE3\VPC4894-03               SQL*Plus
  
  2 rows selected.
  
  SCOTT>
  

  Concerning
  Peter

• How do I remove the brand wrong after face of the album of the people of iOS10?

  New albums of people in the Photos of iOS 10 app that aggregate pictures of people based on facial recognition is really good.  However, one of the albums that created the app auto includes photos of 2 different people.  The application, it is easy merge several albums, but I can't find a way to 'cancel the merger' bad tagged photos in an album.

  How do separate you a photo with a mislabeled face of it is album people in iOS app 10 Photos?

  I found the solution to my own questions.  Make reference to the part "remove misidentified one' of the subsection of people of the overview of the updates of the Photos app in iOS 10.

  http://help.Apple.com/iPhone/10/#/iph9c7ee918c

• How to remove the server name of the customer established in FDM

  Hi gurus
  
  How to remove/change the name of the client server established in FDQM?
  
  concerning
  Hubin

  OK, I understand now. You reference the server load balancing group. Yes, this can be done:

  (a) go to Oracle\Middleware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents\Config
  (b) search for the LoadBalanceServerGroups.xml file

  You can delete this file. The next time that the workbench is started, it will ask you to put the server load balancing group and will create this file again.