Remove the text box and maintaining editable text - Scripts/Plug-ins?

Similar Questions

• Customize Discoverer Viewer to remove the stock boxes and worksheet

  Hello, is it possible to modify the UIX files to delete or move the Actions and the worksheets in the boxes in the Viewer?
  
  Thank you
  
  Rachael

  Hi Jeff
  You may not have much success try thiis and all you do is rendered to the individual components, on or off. Will not free up space.

  You have access to MetaLink? If so, go and take a look at the notes 309239.1

  This article describes in detail how to make many customizations to portal, including to get rid of the links Actions on the side of reuse real estate left behind and Viewer interfaces. It does this by creating icons for the links and place the icons at the top of the page Viewer. The note also includes a zip file download containing the icons as well as a Word document that describes what to do.

  The solution provided by Oracle gives you a new worksheet. UIX and you do not have to make the changes yourself. If you don't want to use all the links at all, you will need to take a very close look at this file to see how then remove or, even better, comment out the code.

  I am working with customizing UIX files all the time but was loath to publish UIX changes here because it will seduce the curious to go and change their configuration.

  Warning to all who read this: manually edit your configuration files or UIX backstage can be dangerous if you want to make sure that you take backups of all files you change and take notes about what you do. Otherwise you will never be able to return to a State of cleanliness which Oracle Support may ask you to do if you need support. They will need to prove to you that you see all the problems were not caused by your changes, but the result of bugs in their original code.

  Jeff, please do not make changes without being sure that you know what you're doing or you follow a document provided by Oracle or someonr trust you who did before. You could end up with an application of non-working server.

  Best wishes
  Michael

• To watch the option boxes and determine if a script custom calculation if necessary

  OK, so I have these fields:

  (Radio button) Units of gradients: ft, cm, m

  (Radio button) Distance units: ft, cm, m

  (Number) Gradient

  (Number) Distance

  I need to calculate the Gradient/Distance BUT I need to make sure that the units are the same. I would prefer, if it is in meters.

  Ft conversions * 0,3048 = meters

  cm * 0.01 = meters

  The other drawback is that he has to work on an iPad running Adobe Reader Mobile.

  Help!

  Hey so I think I figured this out someone else can be useful:

  convert the var = this.getField("GradientUnits").value;

  If (convert == "centimeters") {event.value = '0.01';

  }

  ElseIf (convert == "feet") {event.value = "0,3048";

  }

  else event.value = "1".

  I have created a calculation hidden for each number and then calculates the slope of these two calculations.

  Hope this helps someone else.

• How to remove the search box in the Windows 7 Start Menu?

  I'm a guy from keyboard. Encoder, mudder. Therefore, I prefer my Start menu for user-friendly keyboard, which includes the removal of the search box as the focus of pigs. I can't find this option in the control panel to the taskbar and Start Menu. I lack, or it is impossible to get the classic Windows, looking for the start menu?

  I forgot on the thing... If you want to remove the search box, try this: start > Control Panel > programs > Turn Windows features or disable > uncheck Windows Search

  ...

  I said that you can press Tab... wrong... you must press SHIFT + Tab.

  ...

  About to express my opinion - there is a simple reason why I do this. Some time ago, someone asked how to remove the search box, and it received no response for a few days. After that, I found this option, how to remove... When I said on this subject after a few days, I heard that this person used to this new feature of Windows and now it will keep it. I'm not saying that your opinion is wrong... this system differ only from XP... so we have to try to learn something new and check after a few days we don't like this solution more than the previous.

  ...

  I wonder why write you in commentary edition which has pasted the link almost not worth it. You will get exactly the same behavior of Menu start as in Windows XP. I thought that you, like this old solution... "Pinning just something that mimics the classic style"... No... you have clicked on the first link... you should read more prudent. There was also another. But even if you have selected the first solution with menu PIN... I guess you don't know that you can run all the pinned programs by pressing the Windows key + number... for example, WinKey + 1, so that each action is made without a mouse.

  

• Mobile side.  Using the drop down of your video.  I once put some text on the Mobile page the Menu drops down, but behind the image.  When I remove the text box the menu works correctly.  This also happens with a HTML code placed to Paypal.

  Mobile side.  Using the drop down of your video.  I once put some text on the Mobile page the Menu drops down, but behind the image.  When I remove the text box the menu works correctly.  This also happens with a HTML code placed to Paypal.

  Please check layers panel and put in place the menu item in the list, you can use the layers panel and move up or attempt to move the content.

  If there is still the same, then download a few screenshots of the design view.

  Thank you

  Sanjit

• How can I remove the text in the bookmarks bar and just leave the icons of bookmarks in the bookmark bar?

  I would like to make room for more sites on my bookmark bar so I would remove the text in the bookmarks bar and just leave the site of icon... what else there will be a lot more space to add on several sites in my bookmarks bar.

  SImple, open the bookmark properties and erase the name, to open the properties of the bookmark:

  • Go to bookmarks > > show all bookmarks > > or press Ctrl + Shift + B click on the bookmark to see properties.
  • Go to page bookmark, click on the Blue Star to see the properties or press Ctrl + D

• I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack

  I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack

  Highlite the text inside the text box and press Ctrl + E.

• How can I remove the text in the Favorites toolbar so it's just the icons

  How can I remove the text in the Favorites toolbar it just the icons so they will all fit on one line and are visible

  See:

  • Roomy Bookmarks Toolbar: https://addons.mozilla.org/firefox/addon/roomy-bookmarks-toolbar/

• Remove the text/toggles between Images w/Tap

  I have a title page of an article composed of a photo with the text above it.  I want the user to be able to touch the screen to remove the text in order to allow them to view the photo itself.

  Is there a way to put the text on another layer, and then make sure that the layer disappear / reappear with one tap (like Mag +)?

  I tried a workaround using the sequence of images and slide shows of two images, one with and one without the text.  Using the slide show, I can allow the user to access and 'remove' the text showing them the underlying image without the text, but then they are blocked on this image and unable to return to the image with text/title.

  Anyone has any ideas, how to proceed?

  Thanks in advance!

  D

  digitalcargo2 wrote:

  I want to change the State of object whenever the user touches the photo.  With a slide show if "Stop at the last frame" I the user cannot return to the original image.   If I don't check "Stop at the last frame" then it will automatically return to the first image - even if the user wants to stay put.

  Any ideas?

  It's simple.

  Create your 2 MSO steps using the State of the object Panel.

  When you select the DSO. The overlay creator Panel Slidshow controls.

  Leave it as what!

  Then, draw a rectangle on the ASM, select it and convert to button (object > Interactive > convert to button).

  In the buttons Panel, set the action of the button to go to the next State.

  Now use the preview at the bottom of the overlay button creator or panels Folio Builder to test the result.

  Each tap (click) will toggle the State currently displayed, that is, if I'm not wrong, what you asked.

  See in this sample file.

• How to remove the blue box that is outside the circle?

  http://oi65.Tinypic.com/2iqloqu.jpg

  Can you tell me please how to remove this blue box outside this circle? It's done automatacally whenever I made a kind of form.

  To remove the blue line, you must remove the text of the object wrapping. To prevent it from appearing on new objects, you must set dressing votes to zero with nothing selected (it seems that you set a wrap with nothing selected at some point, not realizing you create a default value), and if it happens in the new files, too, you need to reset the scarf with no open files.

• XP Pro\XP Setup dual boot - want to remove the configuration option and go straight to the Pro

  Used my laptop (Fujitsu Simens Amilo Pi 1505/XP Pro) to install XP Home on a USB connected the SATA drive.
  SFSG.
  Now, my laptop keeps asking me if I want to boot into either Pro or Setup, with the installer has highlighted.

  Q. How can I remove the Configuration option and leave Pro as default boot?

  Thanks in advance.

  Open your boot.ini file (root partition C :), you should see something like the following:)

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect
  "multi (0) disk (0) rdisk (1) partition (1) \WINDOWS="Setup "/ fastdetect

  Remove the entry (the entire line) that has the word "Setup" in it, then you now have the following text:

  [boot loader]
  Timeout = 0
  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windowq XP "/ fastdetect

  -Alternative-

  Start/Run/msconfig (this open the System Configuration utility.
  Select the BOOT. INI tab
  Click on the button "check all boot paths".

  If Msconfig detects a path not valid (you have stated that you have two)
  you will be asked to remove the invalid path.

  J W Stuart: http://www.pagestart.com

• Remove the imported chips and replace them by paragraph Style

  I imported a large number of documents to PDF and I need to remove the text format for the numbering of lettering and balls and replace them with paragraph styles. I find it difficult to arrive at a text or grep search and replace for it.

  So far I managed to assign bullets paragraph style, but I can't seem to remove the imported point. This is my poor attempt a search and replace. I guess it's possible to do it also for lettering and numbering?

  

  and that's what it looks like after the change with the ball remaining.

  

  Good question! Can anyone chime in with the 1-step process, but it is darn fast than two, especially if you save the first query:

  • Search: Bullet tab
  • Change of: Para style balls
  • All changes

  

  • Click on the trash can to delete the paragraph style
  • All changes

  

  Fact.

  

  With GREP, you might find one or several characters followed in a tab at the beginning of a paragraph (^. + ^ t) to locate any list, but you would need to set the style of bullets to bullets, the style of numbering of numbers and the AlphaNumbering style to the letters, so I don't see a benefit.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• remove the administrator name and password

  cannot update or download programs. pop up States 'type admin name'... but the area type in 'GRAYED OUT' help!

  If you had only an administrative user account and it is him that you damaged, all is not lost. You want to allow the built-in Administrator and create a new administrative user by general recommendations for the establishment of user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to log on to the built-in Administrator account.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!