Replace a cloudy sky with a blue sky

Similar Questions

• Replace the CD/DVD with a blu - ray on a HP Pavilion dv4t-1300 player portable player.

  The subject little line about everything said. I need to know what, if any, blu - ray unit, I would need to order. I am running Win 7 Pro 64-bit. Any help would be appreciated.

  Thank you

  Ken

  Thank you distinguished Professor Hüffer. Unit is on order. If I have other log in problems?

• Can I replace a dull sky with one of my photos of clouds? If it is possible how this?

  If it is impossible to replace a sky without interest with a powerful picture of clouds how would I do that please?

  Cliff

  Hi Cliff,.

  Greetings!

  Yes, but photoshop is the answer for this.

  Check here: Photoshop Tutorial - Simple replacement of the sky - YouTube

  Concerning

  Jitendra

• Replace a dull sky when the objects below the horizon line are of the same color as the sky

  Yesterday, I received an exceptional proposal of 'hatstead' to brighten a dull sky, a large part of who was behind the branches of a bare tree. The same technique (using a new layer with any blue skies, a blending mode "darken" and the gradient tool) does not seem to work in this example, probably because the memorial stone (across the road swallowed up to the battlefield of Antietam) is on the same color as the gray sky behind it. I tried 'dark' as an option, but I can't avoid any blue sky that I corrected from another file of bleeding at the edges of the monument. This isn't a photo which I think worth sharing, but I am very curious to know the proper technique to be used in such cases. In this case, the border between the sky and the horizon is relatively simple, and I guess I could use the Smart brush without too many adjustments, but I would really appreciate it if there is another method of learning. Thank you very much!

  

  Yesterday, referenced by K_Gorgadis post is here:

  best selection tool to improve the sky showing through a naked tree

  The same question about the sky in the current image, i.e. the sky is dull, and there are a few shrubs/trees in the distance.

  1. Use the magnetic lasso tool to select the commemorative stone and place it on its own layer (layer > new > layer per copy or CTRL + J)
  2. Close the visibility of this layer by clicking on the "eye" icon. This will protect.
  3. Ask the sky between layer 0 layer and the layer of memorial stone and perform such drilling as previously defined in post referenced above
  4. Click on the "eye" icon to make the layer visible memorial again.

  

• Satellite A200-21dts CD/DVD drive with a Blu - ray drive replacement

  Hello

  I have a laptop Satellite A200-21dts supplied with the mat * a UJ-850 drive.

  My original disk no longer works...
  I plan to buy a new one, but I wish that whoever has a buit in the Blu - ray dvd player.

  I've heard that not all players are working with Toshiba laptops, so I would like a little help to find a bluray player that would work with my laptop.

  Two readers caught my attention:
  the Panasonic UJ - 120 and the Sony BC 5500 has.

  These drivers work with Toshibas?
  Anyone have another suggestion?

  Thank you much for the help!

  Hello

  > These drivers work with Toshibas?
  I think you will have to test it yourself.
  As much as I know Toshiba didn t nothing said about Blueray players compatible Satellite A200.

  The fact is that not all readers are compatible due to different master/slave/c-salt settings.
  With the help of ODD is not compatible you will get an IDE #1 error and the drive will not be recognized by the BIOS.

  But I've read here in the forum that some guy managed to upgrade own Toshiba units with a blue ray player
  So I m thinking you've got a good opportunity to update.

• How can I stop my computer with a blue screen coming up and crashing

  Hello

  my computer keeps crahing with a blue screan befor, I ran anti spy wear and its projection up to nothing. When it reboots it says. from what I can tell, it's the same thing all the time.

  help please

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 3081

  More information about the problem:

  BCCode: 50

  BCP1: 9131EB99

  BCP2: 00000001

  BCP3: 886F7C45

  BCP4: 00000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini080812-03.dmp

  C:\Users\ricky g\AppData\Local\Temp\WER-440422-0.sysdata.xml

  C:\Users\ricky g\AppData\Local\Temp\WER204C.tmp.version.txt

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  To BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer
  See my answers, if this thread - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if you make them available at the SkyDrive or other
  file sharing sites (such as MediaFire). If you have problems downloading the minidumps
  Copy it to the desktop or Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated any drivers just before these
  has started? (Check control panel - updates of Windows to see if all drivers have been updated
  all the time this started) guilty likely hand are video driver, other drivers,.
  memory and antivirus/antispyware/security products could be at fault, but also in car
  questions.

  Use the troubleshooter below and refer to the following message for pilots and memory
  When you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the defective material or in case
  failure of the hardware installed (usually associated with a faulty RAM, either main memory,
  Cache L2 RAM or video RAM memory).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently,
  Remove to see if the error recurs. If existing hardware has failed, remove or replace
  the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  Fix a defective system service: Disable the service and confirm that this
  resolves the error. If so, contact the manufacturer of the service on a possible system
  Update. If the error occurs during the system startup, restart your computer, and press F8 to
  character mode menu that displays the choice of operating system. As a result
  Windows Advanced Options, select last good known Configuration option menu.
  This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this fixes
  the error. If this is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume:  Run Chkdsk /f /r to detect and repair disk
  errors. You must reboot the system before the start of the analysis of disk on a system partition. If
  the hard drive is SCSI, check for problems between the SCSI controller and the disk.

  Finally, check the system log in Event Viewer for additional error messages that might help
  identify the device or driver that generated the error. Disable the cache in memory of the BIOS
  could also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue
  Screen info that would help. Such as ITC and 4 others entered at the bottom left.
  And other information such as codes STOP error and info such as IRQL_NOT_LESS_OR_EQUAL
  or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL

  Hello.

  Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents

  Here's what happens:

  Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

  I also tried to install via Windows updates and everything seems to date. I ran Windows Memory Diagnostic tool, and it found no errors. I ran Windows Startup Repair and got the following note:

  Root Cause found.

  Unknown bug control: one error checking.

  Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

  After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?

  
  Thank you in advance for your help!

  Hello

  Uninstall Faultwire and look for the codes manually as needed. The link to troubleshooting blue screen
  page will show you how to get them.

  How old is the system? A real computer store (not the leeks and glances at a Best Buy or other large surfaces)
  Stores) can help to give a proper diagnosis of the machine.

  You can use Safe Mode - repeatedly tap F8 as you start - use to back up your data in a redundant
  way off the machine. Then re-install Windows that "might" help if the problem is software partner.
  Of course, you will need to reinstall your programs and restore the data in the machine.

  Although there are a large number of errors there could be a cause for all. Try to remove ALL power and
  reinstall all the memory cards and cables (at both ends, when possible) - actually delete and replace.
  do not just tight. Clean the dust bunnies (of course those who are for a PC - for a laptop to ensure that)
  the vents are clear). Try using a small fan blowing through the vents to see if heat is a problem.

  Update key drivers - display/video, NETWORK card and WiFi (network), sound (do not forget to check the sound card drivers
  What update because they will often rollback then repeat the installation until the correct version appears), modem
  and all of the other major features, you could have as 3rd party mouse or keyboard.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• Given to replace my current iphone with a 6s - a trip that I can disable the use of boxes and use a unique sim card data for emails

  Given to replace my iphone today with a 6s - a trip that I can disable the use of boxes and use a sim card only data for email & web.

  If you go to settings > Mobile and less ' use of mobile data for: "turn off all except Safari and Mail

• My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews?

  My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews? OS X El Capitan 10.11.4

  I'm ' dropped in ' the answer! By changing the name of the ".m4v" to ".mov" file preview is now fixed! Billy just got lucky...

• Weird with the blue circle bar appeared above the tabs

  HI - last night, shortly after (not sure how long exactly) after installing Silverlight - direct on the preferred video amazon site, a strange white bar with a blue circle ringed appeared above my tabs in the browser. I do not think that it appeared directly after the installation of Silverlight, but some time later - during which I was on and off my computer - it 'appeared '...

  Here is a picture:
  http://imgur.com/WezuIoV

  And a mode of incognito, that shows something, but I do not know what...
  http://imgur.com/MlhJKbt

  I tried to disable the silverlight plug - nothing; I tried to play around with the Settings toolbar - nothing; then I restarted with modules disabled (in the Help menu) and it disappeared. But then when I restared in normal mode - it was always there... I need to reset (which probably do disappear, but I want to know what caused it)? Can I have some sort of bug? I'd be worried, virus (maybe it is excessive; I'm on a mac, but...)?

  Thanks for any help

  I fell on this particular issue so the other day. It turned out not to be any of my extensions the cause, but instead, it was a theme called "Default Mod" (which was updated to version 28 February 27). I've downgraded to version 27.1 and the blue circle went.

  EDIT: Looking at your screenshot, it seems that use you the default theme Mod as well, so it's most likely the problem.

• I replaced my Firefox3.6 with version 4 is not working on my computer. How can I reinstall Firefox 3.6?

  I've replaced Firefox 3.6 with version 4 that is not on my computer. How can I reinstall Firefox 3.6?

  Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third part of Firefox 4 version that works under OS X 10.4/10.5 and PPC Macs, for details, see http://www.floodgap.com/software/tenfourfox

  If you prefer, you can get the latest version of Firefox 3.6 http://www.mozilla.com/en-US/firefox/all-older.html

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• My laptop stops with a blue screen

  Hello
  I'm french.

  My computer randomly with a blue screen stop.
  The error is BCCode: 3B

  It reboot.

  Hello

  Can you give us more details please?
  What laptop you have exactly? What operating system you are using? Have you already searched here in the forum to find answers?
  What is the exact code of BSOD?

  I think that without this information, we can t help you but generally it of still worth a try to reinstall Windows with Toshiba recovery disc. ;)

• laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

  Hey guys,.

  I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
  
  I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

  boot device not found please install an operating system on drive hard drive (3f0)

  The hard drive is new and I did not not how its gives me this error!

  In addition, this laptop does not seem to boot from a cd to format!

  Any ideas?
  
  Thank you
  Karl

  Hey BHK6,

  I found out what was wrong! It was so simple!

  I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

  Thanks for your help anyway

  Karl