Replaced the dreaded drive Philips 8631 DVD in my 8400 now getting another error/problem HELP!

Similar Questions

• replaced the hard drive and burner dvd on vista computer

  After loading vista, computer is stuck on "Please wait while windows checks your computers performance" its been on 4 hours.any ideas?

  Hello

  1 succeeded installing Windows?

  2 - does this happen when you start?

  I suggest to start the computer in safe mode and check if you are able to boot:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are not able to start in safe mode, and then try to perform the Startup Repair and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• I replaced the hard drive and can't find my distro dvd disc. Help, please!

  Original title: Lost my win7 pro distrib

  Hello!

  I have a Lenovo T440s, I replace the hard drive and can't find my distro dvd disc. On the back side are those:

  WINDOWS 7 PRO OA FOR LENOVO
  * key series *.
  * numbers of many * X 1881991

  Where can I find the version of windows exactly for my laptop?

  Hello

  The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

  http://www.Microsoft.com/en-us/software-recovery

  But Microsoft only provides these downloads for Windows 7 keys to selling product at retail, not preinstalled OEM product keys (Dell, HP, etc.).

  If you have a Windows 7 license detail and are having trouble at the above Web site, contact Microsoft using the Support option.

  @@@@@@@@@@@@@@@@@@@@@@

  If you have a preinstalled OEM license (Lenovo, Dell, HP, etc.), contact Lenovo at the order of recovery media that they need to provide for a fee.

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  See you soon.

• Replacing the hard drive Y410p

  Hi, so the hard drive on my Y410p failed and I need a replacement, any advice on supported players?

  Also after I get the hard drive replaced how can I reinstall windows? I have no recovery media, I have to buy a new copy of windows or buy a recovery disk? Any help would be welcome.

  luck12345asdf wrote:

  Hi, so the hard drive on my Y410p failed and I need a replacement, any advice on supported players?

  Also after I get the hard drive replaced how can I reinstall windows? I have no recovery media, I have to buy a new copy of windows or buy a recovery disk? Any help would be welcome.

  For a copy of the media creation tool Windows 8.1 search. Download and run it. Select the version of 64-bit not only PRO Win 8.1. Select whether you want to be in a Flash DRIVE or a DVD.

  Use the Flash DRIVE or a DVD to install Windows on the new drive. The product key that is built into the bios will be detected automatically.

  Note that you must still install the drivers and the other.programs with the exception of the Onekey program. The program Onekey cannot be restored or reinstalled.

  As for the car will be all thichness 2.5 "7 mm or 9.5 mm (see page 86-87 hardware maintenance manual).

• Replacing the hard drive HP G62-450SA model / recovery. Windows 7

  Hello

  Last week my laptop started running very slowly, and after a few tests, it seems that the hard drive is on its way.

  I phoned to HP supports, however is out of warranty I wasn't able to get a real support, but advised him to watch the online support pages to back up my files, create a file recovery on a usb device and then it would be as simple as taking on the old hard drive, put in the new, and following the instructions to recover my system and files.

  So after these tips, I've created:

  -A recovery image USB on a Virgin USB key, using the Recovery Manager

  -A backup on an external hard drive using the backup and restore

  -An image of the system by using the backup and restore.

  Then I replaced the hard drive.

  When I turned on the laptop all I get is a black screen that says "no boot device - insert the diskette and press any key".

  I have not all discs. I thought that was the point of creating the recovery image on the USB key? I insert the USB key, and it is not recognized.

  If at this point, I'm stuck. I'm not all boards because HP say they have to charge me.

  Please can anyone here tell me what to do next? What I need to buy recovery discs or is there a way I can install the new hard drive by using the above files?

  Thanks in advance

  Hello

  You are welcome

  Another option, you can try would be to restore the system image you created - you can do the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Connect the drive that contains the system image you have created and then follow method 3 below to reload the image on the new HARD drive.

  http://www.shivaranjan.com/2009/05/21/Windows-7-How-to-restore-Windows-7-partition-or-hard-disk-part...

  Kind regards

  DP - K

• HP Pavilion n031se-15 Notebook PC - can I replace the optical drive on my own?

  I would be well capable of replacing the existing with a new dvd rw drive?

  Hello

  Yes, you can replace it with a new one. Click on the link below and check page 3 for more information on the optical drive. Page 75 on how to replace the drive.

  http://h10032.www1.HP.com/CTG/manual/c04439615.PDF

• Failed to retrieve after replacing the hard drive on my DV6

  I replaced the hard drive on my DV6.  Insert the recovery discs, I had done and went through the process.  At the end it rebooted and was told that he failed.  Says to put 1 recovery disc in and try again, but just a loop even message.

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software offerings when you install ImgBurn) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• How can I reinstall windows after replacing the hard drive? Laptop did not come with a disc.

  My internal hard drive went bad in my laptop, easy to replace and relatively inexpensive. However, the laptop came not with the windows disk. So, how can I reinstall windows once I replaced the hard drive?

  Basically, you have two choices. You can communicate with the person who made the computer and see if they can provide either a set of Windows Vista restore disks (I would assume) or an installation for Windows Vista (probably OEM) DVD. If the second choice, determine if you will need to download device drivers or software packages from their web site. OR, you can purchase the operating system of your choice, retail. The wisdom is that, if this is your choice, you see if you will need the device drivers and get those of the web site of the manufacturer.

  Once you have the disks, install in the usual way.

  Tom Ferguson

• Replace the hard drive of 500 GB with 256GB SSD in spectrum XT Touchsmart

  I tried to replace the HARD drive of 500 GB with 256 GB Samsung SSD and then began to install it using the external DVD drive, but during installation without disk hard were found. What I have to disable certain BIOS settings or I need to install the SSD in a separate location. Any kind of help is greatly appreciated.

  Yupp, I could install an SSD. You need to install the drivers for RAID Intel® Rapid Storage Technology (Intel® RST) driver (https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+ (Intel % C2% AE + RST) & lang = fre) during the installation of Windows 8. I extracted the drivers for USB and everything by choosing which device to install windows 8 installed drivers.

  After that, the SSD has been detected and the simple installation procedure. I pasted the link for the driver, don't know whether or not it will get removed. In case it is removed just search driver RAID Intel® Rapid Storage Technology (Intel® RST).

• I have a HP G71 model #G71-329WM. I need to replace the optical drive. What is the part number?

  My HP G71 model #G71-329WM will not load a CD or DVD so I need to replace the optical drive. What is the correct part number? Thank you

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01713747.PDF

  Replacement of optical discs with reference numbers HP are in Chapter 3, page 33.

  You can also read the instructions in Chapter 4 on removing the drive and get the number off of it, which is normally on a white sticker.  A reference to 6 digit-3 digit number (123456-001)

  You can search by the number of coin on eBay for a used camera but work or you can probably buy a new one at HP by entering the part number on the link below.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6287767FBDD34F3696CF3D0837BDBC96

  Paul

• I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

  I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://eSupport.Sony.com/

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• HARD drive gone bad. How to replace the HARD drive and reinstall operating system without a recovery disk?

  I have a HP with Windows 7 Home Premium TouchSmart tm2.  The HARD drive is clicking and will not start.  Error: Device not found Boot.  I guess I have to replace the HARD drive, but how can I restore/reinstall operating system without a recovery disk?  Windows was preinstalled, and I have the product key.  Thank you.

  Hello:

  You can order a recovery disc defined by following the instructions on the link below.

  http://support.HP.com/us-en/document/c00810334

  or...

  You can download the 32-bit or 64-bit version of windows 7 Home Premium ISO on the link below and use your product key to activate the installation.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You need a program that will be able to burn ISO files so that the DVD is bootable DVD burning. Burn at the slowest possible speed for best results.

  Then install all the drivers you need for your PC support and driver page.

  Paul

• My G62-340US, I just had to replace the hard drive. My recovery disks appear to be compromised. Help

  On my G62-340US, I just had to replace the hard drive. I did 4 recovery disks when it was new. Now restore the recovery discs 3 ran, but will not be the 4th disk. The 4th information located anywhere without having to buy a new set? Where can I buy a single disc?

  Hello:

  As far as I know, you would have to buy a whole series of new.

  But, if you can read all 25 characters of the product key of W7 on the bottom of your laptop, I have a free solution to install a simplified version of W7 using the code the product key on your laptop.

  Here's how...

  Download the ISO file from W7 Home Premium 64 bit from the Microsoft link below.

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso

  Make sure that you got the file from xx GB 3. integers download, in rare circumstances, you get a full notification of download, but you do not receive the entire file to download.

  After you download the ISO file, you can burn it to a DVD using the ISO file burn option on your DVD burning program, or you can use this tool to transfer the ISO to a flash USB DVD or 4 GB drive.

  The tool also performs the bootable media.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Then go to the care of your laptop and driver page for available software and drivers that you need.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&docName=c02497777&LC=en&product=4308554

• Replace the hard drive and OS re - install Inspiron One 2330

  Hello

  I had my all-in-one desktop Inspiron One 2330 for about 18 months.  I see serious problems with the hard disk, the system hangs, and the event log is full of HD playback errors.

  ePSA diagnosis shows code 200-0142 telling me to replace the hard drive.  The chkdsk utility runs and sometimes corrects problems and sometimes clean.  Such problems at low altitude, I'm surprised that I can start far enough away from launch internet explore and write this message.

  I called Dell support and they were kind enough kindness to send me the original floppy Windows 8.1 for the Inspiron 2330.  I have a disk hard solid state ready to install, and I saw a bunch of great videos from YouTube that explain how to open the case.  The HD swap is not a big deal, but I have a few basic questions.

  I know that many readers here know the answers.  Thanks in advance for help...

  1. If I install a blank HD in this installation media machine Dell recreates all of these crazy Dell partitions?  I have not of much use for them until I ran the diagnostic ePSA and it was extremely helpful.  I hope that you will tell me that if I do a fresh install, I get a new partition ePSA addition to 8.1 Windows on my replacement drive.

  2. I do not see why this machine won't support a SATA SSD SanDisk brand new instead the 1 TB hard drive that came with it.  Is it OK to use SSD drives in these Machines from Dell?

  3. have good links for the operating system Dell re - install procedure?  I will be installing Windows 8.1 on this drive.  Strangely I find no procedure to re - install step by step operating system.

  4. I have read that the activation key for Windows is now integrated into the motherboard of the machine somewhere.  Do I need to enter this key when I re-install?  I don't see all the stickers on my machine with the key.

  Thank you for your help,

  I finished the upgrade SSD in my Inspiron One 2330 with very little trouble.  Here are answers to the questions for those who find my post using original research.

  1. the Dell Windows 8 installation media disc does not any recovery disc partition, new, retail.  If you install fresh by booting from the DVD drive, you get a nice clean install of Windows 8 without any extras Dell.

  It seems that the diagnosis of ePSA is hosted on the motherboard of the system and not the hard drive.  I have had no trouble to boot in diagnostic mode to run tests of ePSA, even if I see any Dell diagnostic partitions.

  If you install fresh from Windows 8 media you definitely lose the Dell recovery partition.  No big loss.  It is a little strange to wait the software stored on the hard disk to help you recover problems with the same hard drive.  I'll just do another clean DVD media installation if this happens again.

  2. my SanDisk 256 Gb SSD is impressive.  It costs ~ $80 on Black Friday, and now my Dell Inspiron One 2330 boots in 9 seconds.  This is measured from fully powered down for the moment, I type my password to connect.  9 seconds - crazy fast.  Modernization of the best ever.

  3. my internet search found many useful message board posts, some web sites and blogs.  Unfortunately there is no official Dell Reinstall procedure that I could find.  The complete replacement of unplugging the power to see Windows 8 on the screen by using a new SSD was about 70 minutes.  I gathered the information I could find and guess the rest.  Worked for me.

  4 Windows 8 activation code is not necessary for a media of Dell Windows 8 re - install.  The installation process of Windows 8 should be reading the key out of the motherboard because I've never been invited to type one in.

  Here are a few other tidbits:

  5. the Dell Windows 8 media support I was sent by Dell wasn't Windows 8 and 8.1.  I spent more time pulling down of updates, restart and then installing Windows 8.1 on the app store that I did replace the hard drive.  Don't forget: some updates depend on other updates being present.  Really, you need to run the Windows update utility several times to get everything down.

  On the good side of things, my restarts are now long 9 seconds.  I have no problem whatsoever reset to any indication that the system needs to restart to complete the installation of an update.

  6. after obtaining my update to 8.1 Windows system, I installed all the latest drivers for the Inspiron One 2330, which could be downloaded from Dell.  This figure includes a BIOS update which has been a royal pain to apply.  To do this I had to create a start-up separated from 'BACK' USB key.  In fact, it is possible to create this rudimentary special boot using utilities downloaded from Dell drive.  Locate the "diagnostic Distribution Package (DDDP)".  Good luck with that.

  7 Dell backup and restore has been completely useless for the replacement of my SSD.  I have had two drives bootable USB thumb complete with full system backups, the backup restore and Dell refused to restore my data on my Virgin SSD drive.  The error message has complained that my new drive is too small.  It was laughable: my original hard drive was something like 95% of free space.

  8. There is a bonus in all this: by rebuilding your system using the original Windows 8 media, you get a nice fast machine without the excessive Dell bloat-ware.  I do miss the software pre-installed in all.  Glad to get rid of it in fact.