Replacement 250 GB C: drive in Dell Optiplex GX 620 with WD 750 GB SATA drive by cloning. BIOS sees the drive, Windows XP does not work.

Similar Questions

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Windows 7 reports as "Not true" after replacement drive. Windows Update does not work. Any idea?

  I got a report that my drive was in imminent danger of failure.   Bought and made a direct disc-copy of the old disk cloning.    Everything seems to work fine, but now I'm getting the pop up that says Windows is "not true."    Windows shows as active, and nothing I've tried will stop the pop-up.  Worse, Windows Update does NOT work, and without running a few updates, I'm dead in the water for the use of new devices.

  I ran MGADiag.   Here is that content.   Any help is greatly apprectiated!

  ----------------------------------------------------------------------------------------------------------

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {F8417B78-D747-4A8A-9ED2-D65405A9DA4E}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-3615725035-2700926363-1652036055Dell Inc.. Inspiron 1545 Dell Inc.. A11 20090827000000.000000 + 00070FD3607018400F804090409Central Standard Time(GMT-06:00)03DELL WN09 100100Microsoft Office Enterprise 20071264BC76978749586GW6PzcEVEDTVKeO5Ym5UUm41dBk =89388-707-0441865-6559414100Microsoft Office home and Student 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3312009
  Installation ID: 004293808462381663381400261494038926624675101980836995
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 22/06/2015-13:55:06

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 6:22:2015 11:15
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAeqj + MrAO2jOkW3YOKB9UbRq90qZGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  SSDT PmRef CpuPm

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• My computer was wiped out. Now, I'm trying to reinstall Adobe Creative Cloud. I saved the program and the license on my hard drive and followed the instructions to transfer the license, but it does not work.

  My computer was wiped out. Now, I'm trying to reinstall Adobe Creative Cloud. I saved the program and the license on my hard drive and followed the instructions to transfer the license, but it does not work. Just download the program again without having charged?

  Hello

  The transfer of applications Adobe CC is not successful.

  Please download the application of Office CC from the links below and install the CC apps:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• Windows XP does not work when I replace the hard drive or motherboard... ?

  How can I make winxp work if I replace the motherboard or my HARD drive;
  The question another way: I want to install Windows XP on the motherboard so I'll have to take the hard drive and connect it to another motherboard... How can I make because it open of course used... It is is not need any file b4 replacing or anything?

  That may depend on whether you have a copy of Windows XP comes with your PC, to which it might be bios locked the card mother origonal.
  If you have a retail version of Windows XP, you must perform a repair installation and install the new drivers of motherboard
  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If you simply replace the hard drive, you reinstall Windows XP on the new drive, if it is a sata drive, it might be necessary to use the F6 option to install the drivers for the controller sata disks, at the beginning of the installation

• had to install the new hard drive, windows key does not

  My hard drive died in my Inspiron 660. I ordered a new hard drive and a recovery Dell USB key. A recovery key for Windows 8 pro based on my recommended by Dell service tag. I installed the new drive and used the recovery key to install Windows 8 pro. I then used a third-party tool to get the product key from the BIOS. The product key does not work. I wonder if the product key on the BIOS isn't for Windows 8, Windows 8 pro. If so, the wrong recovery key recommended by Dell.

  What should I do to activate Windows successfully?

  Secondly, on my old drive hard, I had upgraded to Windows 10 while he was a free upgrade. How to bring back the free update?

  Windows 8, Windows 8.1 and Windows 10 TH1 and TH2 had problems installing specific edition. Your key can be a simple language edition or one with Bing edition and therefore rejected by the installation of the edition of bad media.

  Windows 10 TH2 and later all the windows 8.x and 7 OEM keys are treated as Windows 10 keys. Edition installation specific issues have been fixed with Windows 10 RS1. The file .iso Windows 10 RS1 image is covering several editions. It contains all OEM editions and will automatically collect a key Windows 8/8.1/10 UEFI BIOS OEM System Locked Preinstallation and automatically installs the correct edition of Windows 10:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

• 280 G1 Micro Tower HP: Chipset driver needed for HP 280 G1 Micro tour Win 7 32 Bit Driver on the HP Sup site does not work

  Driver chipset on the HP support site does not load correctly.  All other drivers will charge properly.    Can someone point me to a chipset driver that is installed correctly?

  Thank you!

  Hello:

  Try the one directly from Intel...

  A 2nd on the left side of the page is the automatic installation file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-

• Tecra A7-202: Touchpad driver virtual scrolling does not work

  Hello, I have problem with Synaptics touch pad driver version 9.1.0 (laptop Tecra A7-202).

  When I run any program as administrator, virtual scrolling does not work.
  When I run the program as a normal user, everything is OK.

  Hello

  What's your Tecra preinstalled with designed Toshiba recovery image?

• Tecra A9: HARD drive write Cache does not work

  Hello!

  When I try to activate your hard drive write cache, it does not work:
  I can check the box and press OK, but when I go back to the dialog box the box is unchecked.
  The event log shows a warning: "the driver disabled the write on the device \Device\Harddisk0\DR0 cache.

  This slows down my laptop. I don't want to work without the write cache.
  What can I do?

  Greetings,
  Christian

  Hello

  did restart you your machine after checking the box? Usually, you must first reboot the system when certain changes.
  On the other side, you know this microsoft article? You should read:

  http://support.Microsoft.com/kb/332023

  This could probably explain why windows leaves the box unchecked...

  Welcome them

• Driver Chicony webcam does not work on the Satellite A200-13O

  After the misfortune that occurred to my webcam, I tried to fix it by uninstalling the driver and then put it back in place (by the toshiba Web site).
  I did this twice and it does not work,
  allthought the pc installed the driver, the camera was not working because a file was for win95 and my pc has vista.

  After several reboots, I made the following
  -Start
  -all programs
  -camera assistant software
  -Right click
  -options (the last button in the right click menu...)
  -compatibility
  -Select work in win95 compatibility
  -ok
  Sorry for my English, I am Greek and my menu vista also... :))
  If anyone wants more details please to contact me.
  I hope this could help those in despair...

  Hello

  Yes I would like some details;).

  For example: manufacturer who is the camera, it is built, made, he has worked previously, and so on...

  So there is a lot to say, have you ever said to the second part, but I'm missing a few things as I've described above. By the way: you can try to recover your machine, if you really need on your camera, but it is really the LAST RESORT.

  Good bye
  John

• Business Inkjet 2300 driver for Windows 7, Windows Update does not work

  Bought an inkjet 2300 for my office, but the driver does not work for Windows 7 (64) and despite what all the forums and guides say, Windows Update don't shoot the pilot.

  There must be a way to get the driver directly - any help would be much appreciated. I don't want to take the camera for what seems like it would be an easily solved problem.

  Thank you!!

  Hello

  The drivers should be downloaded automatically,

  You can also download the drivers caraa of the Microsoft Update catalog from the following link:

  Most probably the 3rd result should work on your operating system, depands on your proccessor type, for any SLA question try the result 5:

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=inkjet%202300

  Once download you the drivers, you can follow the document below to extract and install via the add a printer dialog box:

  http://support.Microsoft.com/kb/323166

  Shlomi

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• The permissions of folder/drive Windows 8 will not work with the Administrators group?

  I read through some of the other questions on the etc folder permissions, but don't really know the answer to this question, or I do not understand what has been the response.

  I did a new install of Windows 8 and have a few records that I stored stuff I now want to use it as well with Windows 8.  As with the other threads, I was getting access denied error etc and have not defined administrators group/full control permissions, but I still couldn't access readers, and my connection is type administrators.

  When I take the disk permissions with my local user rather than to the Administrators group, but, it works very well, even if no one else can access the drives.

  I am confused on how I can make this work for administrators rather than my specific user account, thank you very much!

  If you know that you are a member of the ADMINISTRATORS group, then just browse the classic desktop and open Windows EXPLORER (WINDOWS KEY + E). Right CLICK on the C DRIVE, and then choose PROPERTIES. Click the SECURITY TAB, and then click the entry of ADMINISTRATORS (computername\administrators). Verify that the checkbox under ALLOW checked for each entry. If it not to hit EDIT and tick all the boxes ALLOW. Then click OK and OK. Check the settings for the SYSTEM account.

  If the first step does not work, try this step only. If it does not, click ADVANCED on the SECURITY tab. In the PERMISSIONS tab highlight of ADMINISTRATORS, choose CHANGE PERMISSIONS. Ensure that all are checked in the BASIC PERMISSIONS area. The menu is APPLIES to drop down, make sure it is set on this FOLDER, subfolders and FILES. Click OK, OK, and then APPLY.

• Pavilion G6 touchpad driver download link does not work

  I own a HP Pavilion G6 model 2010ax.

  I tried to download the drivers for touchpad for the model from the following link on the Web of HP India site: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106935-1&cc=in&dlc=en&lc=en...

  A page is not displayed an error message is displayed by clicking on the download button.

  Final download link: http://ftp.hp.com/pub/softpaq/sp56001-56500/sp56465.exe

  Is there another place where this driver can be downloaded? Or should I use the latest orders from synaptics Web site. Even if it provides drivers to download, synaptics Web site recommends using drivers that are released by the manufacturer of the laptop.

  Hello:

  It seems that the driver link does not work for all phones g6-2000.

  I would use the model series g6-2100, which should work perfectly (and the download works also).

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5262606&prodNameId=5283213&swEnvOID=4063&swLang=13&mode=2&taskId=135&swItem=ob-104704-3

  Otherwise, feel free to use the one directly from synaptics.

  Paul

• I have a license for CS3 Design Premium, but not drive. Exactly where can I download the software? The solution on the Adobe Web site does not work...

  I have a license for CS3 Design Premium, but not drive. Exactly where can I download the software? The proposed solution on the Adobe (CS3 products download) website does not work...

  If the page that you are connected does not work, then it should so what happens when you try?  It is possible that it could be a simple matter of enable you cookies or try a different web browser.

  You can also try to download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html