Request failed, click ok to finish.
When I turn on my computer as soon as it boots up to windows it gives me an error message that says: " request failed, click ok to terminate".» After that my computer shuts down. I don't remember the code there.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Hello
I use Oracle EBS, whenever I click on the Zoom button I get the error at the bottom of the page below.
Unhandled exception in AXFCustom.launch_command_soap SQLCODE =-29273: ORA-29273: HTTP request failed
When I checked the master.log file I see the error log entry below.
< SNIP >
path Wallet AXFCustom.launch_command_soap = file:/u020/dba/wci-wallet/sd12t-wallet 23/03/2015-22:09:44
23/03/2015-22:09:55 unhandled exception in AXFCustom.launch_command_soap SQLCODE =-29273: ORA-29273: HTTP request failed
ORA-06512: at "SYS." UTL_HTTP", line 1130
ORA-29106: could not import the PKCS #12 wallet.
ORA-06512: at the 'APPS '. AXF_SOAPCALL', line 14
23/03/2015-22:09:55 AXFCustom.main: output
< / SNIP >
Please provide your input on this.
Thank you
Shakeel
Hi Shakeel,
This error occurs when there is some value (which is unnecessary) present in the column "AXF_WalletKey."
To resolve the above error, please follow the steps below.
1. connect to AXF schema using SQL developer.
2. run the command AXF diagram below.
Call fnd_vault.put ('AXF ', 'AXFWalletKey',' ');
commit;
3. disconnect the session of EBS log on again and check the Zoom button.
Kind regards
Rahul
-
PIXMA MX340 Windows 10 device descriptor request failed Code 43
Hello. I recently bought a new computer to office 810 - QE HP Envy Phoenix yesterday.
The first thing I did was to finish the free update on a clean slate ("save anything") of Windows for Windows Professional 10, 64-bit edition 8.1.
The specifications of the system are:
32 GB RAM DDR3
3 TB hard drive 7 200 RPM SATA
Integrated Realtek / Beats Audio
Processor Intel Core i7-4790 3.6 GHz 4 heartsNVIDIA GeForce GTX 745 4 GB DDR3 video card
My Canon Pixma MX 340 multifunction printer is not able to be recognized by this new system. I installed the software and drivers for the printer, however, Device Manager keeps telling me that this printer is a "unknown USB device: device descriptor request failed, code 43" I also tried to download the latest drivers directly from Canon specifically list of compatibility with Windows 10, which did not help me at all because the drivers are not able to find the printer during the installation.
I had originally this printer connected to one of the USB ports 3.0 at the back of the system, but I have also tried using this printer with the USB 2.0 ports, as my old system had USB 2.0. No change, it still gives the same exact error. I also tried this printer connected directly to the USB 3.0 and USB 2.0 ports on my computer without effect before.
I checked to see if this printer is "compatible" with 10 windows, and according to the compatibility of Microsoft website, it says that the Pixma MX340 should compatible.
Advice, tips or suggestions would be very appreciated. Thank you.
I FOUND THE PROBLEM.
I forgot that not only I used an extension USB cable, but I was also with a long USB cable and the USB extension as well. This long USB cable was the culprit!
I just noticed this and decided to test it. With the long USB cable, I get the error. But when going back to a standard length cable, the printer was correctly as a Canon MX340!
If I switch back to the long cable, it will be impossible to find.
However, I can still use the USB extension cable. This cable does not cause a conflict any!
-
Cisco TMS 14.4 "Ajax request failed...". »
Hi Experts,
I installed Cisco TMS 14.4, installing all makes them very well, but at the first connection, I had error in Pop - Up The Ajax request failed...
TMS ERRORCOOKIE {FF44A030-7F95-461C-8065-615FCE335F7B} var TMSError = {toggle: function (tableId) {var errorTable = $(tableId); errorTable.style.display = 'block';}} TMSElement.positionCenter (tableId); $('InfoTable').style.display = 'none '; }} Stop_Wait(); An error has occurred!
Please click the back button on your browser to return to the previous page or click here to go to the front page of TMS. If the problem persists, contact your administrator to TMS.You can see the image
Can someone help me
Thank you
Hello
It should be a more specific error message in the log - web.txt, located in the \data folder in the MSDS on your server installation directory. What did he say?
Kind regards
Kjetil -
downloading acrobat adobe pro DC, it stops at 5% and bed WebGet request failed. And yes I am connected to internet when downloading and it seems that I have the system requirements for the download.
I had this problem too on an area of PC, but when you sign on and the local administrator on this PC account, I was able to download it completely. You can connect to the account a local administrator on your PC or have your it Department do for you and see if it works. If you are not in a domain environment, try to disable your antivirus software before you run the installation program. In addition, run the installer as administrator by right click and choose "run as Administrator". Let me know if it helps you.
-
Tricks to work around the error message "HTTP Request Failed" when you download Acrobat Pro on a PC running Windows 7?
clear your adobe.com cookies or use a different browser.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7.1. 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5.5, 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Former title: error code (0xc0000006)
Every time I try to play dragon age or try to open my registry fixing software error that happens with the autorun.exe application failure code click ok to finish I really want to play my game and do a scan but I'm unable to do so. I tried to fix it by l ' completely off I tried to start the bare minimum on start up and I even uninstalled most of the programs that I put on the computer but they still does not work properly. Now my usual game even now install from the disc. I scanned for viruses and malware, so I know that these two things are not the issue. Please help me I don't know what else to try to solve the problem that I encounter.
Thank you for your time.
Hello1. What registry fixing software do you use?
Method 1.Let us scan SFC and check that it prevents this error to occur.
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
To do this, follow these steps:
1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
2. type the following command and press ENTER:
sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
More information on SFC scan found in this document:
http://support.Microsoft.com/kb/929833Method 2.
Best thing you can do is to perform a system restore just before where the problem occurred.
I have listed a few articles that explain the system restore in Windows 7.
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questionsI hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Build request failed with the message: error: ENOENT, untie
I use emulator ripple to package the application for Blackberry os 7...
But when I press the button package it gives me error as follows:Oh, Snap! Build request failed with the message: error: ENOENT, remove the link "C:\Documents and Settings\AtikJ\RippleSites\AgriQuote\packaged\AgriQuoteApp.zip".
Duplicate of:
http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/error-while-packaging-the-app-us... -
Error = the Code signing request failed
I'm trying to sign my application of webbworks for the playbook, but I cannot, here is the process of me, packaging and then try to sign. I can install non signed bar file fine but I can't seem to sign.
"/ Users/mike/projects/blackberry playbook sdk/bbwp/bbwp" $build_folder "/ build.zip" ""
[INFO] Parsing of the command line options
[INFO] Bbwp.properties analysis
[INFO] Validation of archive WebWorks
[INFO] The analysis of config.xml
[WARNING] Cannot find an element of
[INFO] The application of filling source
[INFO] Compiling applications WebWorks
[INFO] Packaging of the record bar
[INFO] Bar complete packaging
[INFO] Packaging applications complete WebWorks
"/ Users/mike/projects/blackberry playbook sdk/bbwp/blackberry-tablets-sdk/bin/blackberry-sign"-verbose - cskpass pass - keystore "/ users/mike/projects/blackberry playbook sdk/bbwp/bin/sigtool.p12"-storepass pass "$build_folder"/bin/build.bar RDK.
TBS = developer certificate
30 81 a0 c5 03 02 01 02 02 04 4 a3 82 99 30 0c d
> barsigner error: Server error: Code signing request failed because this file was previously signed.
This can be caused by trying to sign the same version of the application. Try incrementing the value of the version property in your config.xml file (or use the command line parameter - buildId) and sign again.
-
Signature request failed for key RRT and CPR
Hello world
I received 3 csi lines of RIM to sign my application. I recorded these 3 keys without problem.
When I try to sign my application, I correctly get signature only for applications RBB. RRT and CPR requests fail: "the signature on the code signing application did not check. The probable cause of this problem is entered a wrong password CSK. »
I checked the passwords. The same goes for these 3 files.
I use JDE 4.2.1.
What could be the pb?
Thanks in advance.
It is a problem of password. I recommend removing your keys and start over with a new series. You can request new keys (for free) here: https://www.blackberry.com/SignedKeys/
-
Hello. Pls I just got the error "Oh Snap!" "Build request failed with the message: [ERROR] CAP exception occurred" when I tried a test package ' Helloworld ' procedure follwing illustrated app on "http://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html."
I need your help pls.
Hello!
Thank you for your response. I uninstalled "jdk-7u25-windows-i58" and got 'jdk-6u35-windows-i586', and his work well at the moment. I hope that I have no problem to use an older version.
-
Error of the ripple: Oh Snap! Build request failed with the message: CreateProcessW
Hello
I installed the Mobile Emulator 0.9.1 ripple with SDK for Tablet 2.2.0.5 WebWorks, following the instructions exacly on a Windows 7 64-bit machine.
If I try to package virtually any application (HelloWorld, weather, examples, something more complex, whatever), I get the following error:
Oh Snap! Build request failed with message: CreateProcessW: The system cannot find the file specified.
I tried a lot of things. I'm guessing that it's a mistake with the SDK, since I can enter any path to any folder that exists on my HD as the path to the SDK and I get the same error.
Path SDK: SDK for Tablet 2.2.0.5 WebWorks c:\RIM\BlackBerry
The project root: c:\Users\Username\RippleSites\AppName
Archive name: AppName
Output folder: c:\
I tried different paths for the foregoing, moving my code and by reinstalling the SDK.
I'm at my wits end - about to renounce WebWorks. Any ideas?
It seems %SystemRoot%/system32 and any % were missing from my path variable. All good - too bad!
Land
-
Build request failed with the message: helloWorld/Dokumente / is not a valid path
Hello
Unfortunately ripple does not work under Windows 7, so I tried on Mac. On Mac, I have the following parameters in the ripple:
SDK path: / Developer/SDKs/Research in Motion/BlackBerry WebWorks SDK 2.3.1.5
The project root: / Dokumente/helloWorld
Archive name: helloWorld
Output folder: / Dokumente/BlackBerryOutputThere is the file config.xml and index.html file in the helloWorld file
I have for this site:
When I try to pack in ripple, I get:
Build request failed with the message: helloWorld/Dokumente / is not a valid pathThere is a message ' no simulators found "on the bottom of the settings, too." '
I tried different paths, one of my localhost in Apache, but nothing works. What's wrong??
Well, the path was not "consistent". I hate the f... Mac: / Users/Valentina/Documents/helloWorld to the project root and/Users/Valentina/Documents/BlackBerryOutput was necessary.
Just in case somebody stumbles on the same problem.
-
I am trying to package and sign an application with ripple and I get this error: Oh, Snap! Build request failed with the message: zip i/o error: no zip file or directory error: could not create output file
What can possibly be the problem here?
Solved!
I had the field output folder of the same value as the name of the archive
-
Hello
I get this error when you try to run the sample of cards on the corrugation Simulator:
Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".
The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged. With the help of Mac, the latest versions of everything. The application runs in undulation ok, but I can't throw on the SIM BB10.
Someone else have this error and know why?
PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?
PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged. I guess it should not but leaves me clueless as to whats wrong with cards.
Thank you
The two directories (in the extensions directory and maps project directory) have permissions to 777.
But you gave me an idea...
It turns out that simply by putting
"Packages".
in setting output wasn't enough, I need the full path
for example: "/ Users/username/RippleSites/Maps/packed."
and presto, now it works!
Thank you!
Maybe you are looking for
-
It will work with an iPad, and it let me not use the browser on the iPad?
It will work on an iPad, and I'll always be able to use the browser on the iPad?
-
As I close outlook wxpress yesterday, I got the prompt for compaction. It's been awhile, so I let it start and stop later the computer without checking anything. Today, when I went to check my messages, everthting from 2012 until yesterday was gone.
-
HP Pavilion dv6 with Windows 7 - Interactive Services detection
Hello I get the following window poping up on my laptop... Detection of Interactive Services: A program that is running on this computer tries to display a message. The program might know form, you or your permission to perform a task. (with the foll
-
Hi I ve bought a dell server with the .i c6100 4 knots have been able to install on ESXi 4 nodes and it works fine on a USB key s... but now I have installed 4 SAS 15 k disks and they don t seem to be reconised...? I see green light opened and it rem
-
BlackBerry 10 Arab melting is really bad
The Arab police in 10.3.1 seems crazy. The police in 10.2.1 was really great. Why would they guys change something that was already great? Is anyway to change the Arab police in 10.3.1.1154?