Request stop when I write a character with a ^ as a i u e o... (French text)

Similar Questions

• Not found DVD Maker "DVD burner" message when DVD writer works well with other programs

  Hello

  I just created a DVD with AVS Video Converter and burned a DVD with no problems and created later a film with Windown Movie Maker, which worked well, it has exported to Windows DVD Maker, again not a problem, but when I click on burn, I get a not found message "DVD burner". How can I fix, I know the burner works very well because it works with other programs... And Windows DVD Maker was working fine until recently and outside a updated Windows Vista, I did not further updated or changes to the computer.

  Thanks for your help!

  Hi Froggie_UK,

  Since this problem you encounter began after that windows update, you can use the System Restore tool to return your computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Before you start Please back up your data

  To restore the operating system to an earlier point in time, follow these steps:

  ·         Click Start, type System Restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  ·         In the System Restore dialog box, click choose a different restore point, and then click on Next.

  ·         In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  ·         Click Finish.

  ·         The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  If it is an update, the best way to solve this problem is to apply only updates one at a time to determine which updates is causing this problem.

  Click on start-> all programs-> Windows Update, click on change settings in the left menu. Select download updates but let me choose whether to install them, click OK. When you are alerted to install a new update, in this window, click updates see, uncheck all updates and select one at a time, install it, restart your computer, test and update. Once you find the update either continue to ignore it, or look for it at http://support.microsoft.com/.

  We hope this resolves the issue and look forward to hearing back from you on your results.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Satellite M40X-184: problem with keyboard - only writes a character in 1 second

  Hello

  There is an interesting problem with my laptop, it cams with Xp Home edition with 1 partition, I used partition magic to create another and then format C:, after installation of XP Pro. Install drivers one by one, now when I try to write something in anywhere like msn, notepad or Word, she wrote just a character in 1 second;

  Like when I write "trial" he write in 5 seconds... Why what happened and above all how can I work this?

  Hello

  have you tried to uninstall the pilot how you installed? Maybe you should do this, I think it's probably just a software problem and no hardware failure.
  So you can also try to set the rate of your keyboard type in Control Panel-> keyboard control-> (delay repeat, repeat rate) and maybe it s just there a setting that needs to be corrected.

  Welcome them

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• UTL_HTTP request and response stops when > 32 k

  Hello
  
  Can someone help me on how to solve the problem when utl_http request and response stops when > 32 k.
  
  Thanks in advance
  
  Mhand

  Hello

  Please post the code you have so far.

  Please send the request into pieces of 32 k, after setting the following header:

  UTL_HTTP.set_header ( http_request, 'Transfer-Encoding', 'chunked' );
  

  Similarly, the response must be read using a loop and iterative calls to UTL_HTTP.read_text.

• When you try to uninstall a program, I get the message setup.exe has stopped working, can someone help me with this problem

  I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working

  Hello

  ·         Faced with this problem specific to uninstalling the application with the printer, or with another application?

  ·         What is the brand and model of the printer?

  You can follow the method below and check if it helps.

  Method 1:

  I would say as you put your computer in a clean boot state and check if it works.

  How to troubleshoot a problem by performing a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.

  Method 2:

  I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Hope this helps,

• New Yoga 14 stops when the lid closes

  I just got a new series of Yoga 14. Sometimes, but not always, the laptop stops when I close the lid, even when it is plugged. I already looked at the option to 'choose what happens when the lid is closed' and it is set to sleep, no downtime.

  Any ideas on how to solve this problem.

  Hi Nickajeglin,

  Welcome to the Forums

  According to the request, we understand that you are facing problem with the system stops when the lid is closed in your Lenovo 14 yoga.

  As you mentioned that you have changed the setting to sleep, try changing to do nothing option and check also the question, if still the issue persists then uninstall and reinstall the power management and check the issue.

  Click here to for 10 windows power management.

  Let us know the result.

  Best regards

  Ashwin.S

• When I write an email and contects repeatedly changed. The sender can see what I changed in Andriod email.

  I've found that when I write an email and have changed the content of the e-mail several times before that I send. It's ok for the sender to see it with an e-mail client. Also, it shows normal when I received the reply to the sender and visualize it with Thunderbird.
  However, he shows, when I received the email to reply back and it shows all of the content, I've changed with emails from difference in Android mails.
  I think it must be something to do with Thunderbird, because it does not happen with the other mail client.

  (Alt + T) Tools menu > options > composition > general and turn off auto save.

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• Why has my Automatic rotation of the ipad stopped when I pass the vertical horizontal screen remains in the vertical position?

  Why has my Automatic rotation of the ipad stopped when I pass the vertical horizontal screen remains in the vertical position?

  Not all applications are supported both orientations. If you experience of this with an app that should work, you know, you most likely locked up the switch of direction. Drag your finger from the bottom of the screen bezel to display Control Center. Tap on the lock with a circular arrow icon.

• My Mac was purchased in November 2014. The fan makes a noise Purring but stops when I lift it and hold it vertically. I just got this back from repair to the workshop of John Lewis as he made a further strong noise.

  My Macbook (one and a half year). The fan has become noisy and I just got in return for repair from John Lewis. The problem is that I think that it is still too noisy. He runs not fast, but it is noisier than it was when we bought it first.  The fan noise also stops when I take the Mac on the end. Is this normal?  Thank you.

  There is no such thing as a MacBook 1 year and a half with a fan.

  The 12 '' MacBook isn't a fan.

  The last MacBook with a fan was the 2010 model.

  Perhaps you have a MacBook Air or a MacBook Pro, if so you should post your question to one of these areas of the forum.

• Firfox crashing when you run a game with original by Tridef 3d application

  I have a LG D2342 screen. This screen has 3d Support. I play Battlefield 3. The 3d is running through an application called Tridef 3d. When I start the game with the Tridef he begins to open Firefox, then the firefox would just stop responding and hangs. I love using firefox but currently I can't set it as my default because of this problem.

  Have you tried disabling hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I write editorials and press ENTER, it does not work and I have to press the arrow to go. Also ctrl + enter for auto site full addressdoesn can't work.

  When I write a Web site address and press ENTER, it doesn't fit to the page and I have to press the arrow to go. Also ctrl + enter for the AutoComplete does not work the address of the site. Lately, I noticed this problem in 6 FF. I expect the upgrade to 4 FF will solve this problem, but he persists.
  Thank you

  This may be due to a problem with an add-on. To find out how to solve this to find out what is causing the problem, see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes