Requirements for the use of Resource Pools

Similar Questions

• How to use Ready Boost, and what are the requirements for the use of portable hard drives and flash drives for use with Ready Boost?

  I have Windows 7 64 bit Ultimate Edition and try to get Ready Boost to work on my PC using portable hard drives or flash drives. I have 2 portable hard drives (iomega 120gig, Seagate 250gig) and a 8gig sandisk cruzer flash drive. All this deterioration when you try to use the ready boost said that these discs only are not compatible or not supported. So what do I need?

  Not all readers will work with ReadyBoost. There are some readers who actually will specify that they are capable of ReadyBoost.

  By WikiPedia:

  • The device should have an access time of 1ms or less.
  • The device must be capable of 2.5 MB/s for 4 KB random read speeds indicates the spread uniformly across the entire device and 1.75 MB/s write for 512 speed random writes spread uniformly across the device.

  You must also put the device and let it plugged in for ReadyBoost. ReadyBoost is therefore best suited for a small thumbdrive (up to 4 GB) that greater thumbdrive or external HD that you would probably be disconnect from time to time.

  Open solutions Explorer window, find your Cruzer - right-click on it and click Properties. If there is a ReadyBoost tab, you can set up - set it to dedicate this device to ReadyBoost. It will be implemented and save a file on the USB key. Click Apply and're you good to go.

  A caveat which I can testify first-hand. Apparently while booting, Win 7 has trouble with some USB key - it will search the thumbdrive, the operating system, the process of starting to stall and you say: ' Missing Operating System ' - Fortunately the solution is very easy. Shut down the computer, remove the USB key, restart the computer and it will start normally. I had this happen with a 8 GB Cruzer. This seems to be a random thing, because I had the Cruzer plugged in and booted several times without encountering the error of missing operating system message. No idea why or why it is injury. Currently, I use a Kodak USB 2 gig key that seems to work very well.

• What are the requirements for the use of Sql Developer with MS SQL Server via the JDBC MS driver?

  I tried to add

  sqljdbc_4.0\enu\sqljdbc4.jar

  or

  sqljdbc_4.0\enu\sqljdbc.jar

  or both

  in part 3d driver JDBC list in properties, but there is no tab in the connection dialog box create.

  Just for a test, I added IBM's JTOpen driver and a new tab of the DB2 appeared immediately.

  What should I do to be able to create connections to MS SQL?

  Use the correct driver, jTDS 1.3

  http://www.Oracle.com/technetwork/database/migration/JDBC-migration-1923524.html

• where the requirements for the current download? This used to be posted prominently.

  where the requirements for the current download? This used to be posted prominently.

  See:

  • http://www.Mozilla.org/en-us/Firefox/24.0/system-requirements/

  You can find the full version of the latest version of Firefox 24.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

• A gateway is required for the RAC environment?

  Question:
  
  A gateway is required for the installation of RAC, General information on the RAC environment?
  *.. If so, why? *
  
  Thank you very much
  
  
  
  I do this test with my single node RAC
  
  1. run with the gateway:

  [oracle@linux1 ~]$ crs_stat -t
  Name           Type           Target    State     Host        
  ------------------------------------------------------------
  ora....SM1.asm application    ONLINE    ONLINE    linux1      
  ora....X1.lsnr application    ONLINE    ONLINE    linux1      
  ora.linux1.gsd application    ONLINE    ONLINE    linux1      
  ora.linux1.ons application    ONLINE    ONLINE    linux1      
  ora.linux1.vip application    ONLINE    ONLINE    linux1      
  ora.orcl.db    application    ONLINE    ONLINE    linux1      
  ora....l1.inst application    ONLINE    ONLINE    linux1      
  ora....test.cs application    ONLINE    ONLINE    linux1      
  ora....cl1.srv application    ONLINE    ONLINE    linux1
        
  [oracle@linux1 ~]$ srvctl status database -d orcl
  Instance orcl1 is running on node linux1

  Every thing seems OK!
  
  
  
  2. run without gateway (empty parameter):

  [oracle@linux1 ~]$ crs_stat -t
  Name           Type           Target    State     Host        
  ------------------------------------------------------------
  ora....SM1.asm application    ONLINE    OFFLINE               
  ora....X1.lsnr application    ONLINE    OFFLINE               
  ora.linux1.gsd application    ONLINE    ONLINE    linux1      
  ora.linux1.ons application    ONLINE    ONLINE    linux1      
  ora.linux1.vip application    ONLINE    OFFLINE               
  ora.orcl.db    application    ONLINE    OFFLINE               
  ora....l1.inst application    ONLINE    OFFLINE               
  ora....test.cs application    ONLINE    OFFLINE               
  ora....cl1.srv application    ONLINE    OFFLINE               
  
  [oracle@linux1 ~]$ srvctl status database -d orcl
  Instance orcl1 is not running on node linux1

  Something is wrong!

  By default, default gateway of the server is used as the target ping during action Oracle RAC 10 g VIP status check.
  After a ping failure, Oracle will decide that the current interface where the VIP is running has failed and will introduce
  an interface / failover of the internode VIP.

  In above case, we used a single node for installation of CRS, so the VIP couldn't failover to other nodes and so reported an additional as error:
  CRS-1006: no more members to consider
  CRS-0215: could not start resource 'ora.dbtest2.vip '.

  Try->
  A FAIL_WHEN_DEFAULTGW_NOT_FOUND parameter in the file
  $ORA_CRS_HOME/bin/racvip to fix this problem.

  The following steps will fix the problem of departure of VIP for above mentioned scenario.

  1 - Stop applications
  2 - as root,
  VI the script $ORA_CRS_HOME/bin/racgvip and change the value of
  variable FAIL_WHEN_DEFAULTGW_NOT_FOUND = 0.
  3. start the application and you should see online resources

  You can proceed to netca and dbca to create a RAC database after that.

• The amount of space (memory) required for the good functioning of Firefox?

  The amount of memory required for the operation of Firefox? Trying to decide between IE and Firefox. Research in the new computer and need to think about which browser to use, and how much space it needs to work properly.

  You need no more than 40 MB for the operation of Firefox.

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Error - Rome: Total War did not find DirectX 9, which is required for the game to run. Please reinstall DirectX.

  Original title: problems running Vista on Bootcamp DirectX.

  I have browsed the web for the last little while and cannot find any solution.

  I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.

  I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.

  I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.

  I do not know where to go from here, any help would be greatly appreciated

  Have you installed this installation?

• Digital signature is required for the AVG filter driver, I had to disable AVG filter driver to connect to the internet.

  Hello

  Apparently, after the updates (don't know where exactly), a digital signature is required for the AVG filter driver. I had to uncheck AVG filter driver in network card to connect to the internet settings. Now the AVG firewall has stopped and the Windows Firewall is enabled.

  Does this mean that AVG is not compatible with the new updates?

  Hey Deiry,.

  Why don't disable you driver signing in Windows 7 and you would be able to use the AVG firewall. Take a look at the section of the Web site.
  http://www.ehow.com/how_8131643_turn-signing-check-Windows-7.html
  See you soon!

• Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

  I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

  "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

  I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

  Thanks for any help.

  I tried to disable everything in the bios... including the things I needed. No luck

  Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.

• Does anyone have a solution for the use of Bible Illustrator 3.0 MS8 and MS7

  Original title: program programs Application Applications compatibility.

  Does anyone have a solution for the use of Bible Illustrator 3.0 MS8 and MS7

  What are the requirements of system for this program?

  What version of Windows it says on the package, it was designed for?

  If its designed for an earlier version of Windows such as Windows 95 or Windows 98 or XP, then it is probably incompatible with Windows 8.

  If the product packaging indicates anything in the 1990s OR early 2000s, I am afraid that this is not something that is guaranteed to work with Windows 8.

  You can try the following average time.

  Point to the installation files where they are.

  Right-click on the configuration file, and then click "troubleshoot compatibility".

  Wait, it detects the problem.

  Click on the option "worked in an earlier version of Windows.

  Select Windows 7 RTM or better Windows Vista SP2

  Click next

  Click Start the program, wait, it installs

  When the installation is complete, click Finish and save the settings.

• wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter.

  Hi all

  I have a data file where there is a wcm:element like below

  < wcm:element = "linkUrl" name > [!-$wcmUrl ('resource', ")-] < /wcm:element>

  So, I get an exception to content server

  
  

  Event generated by the user 'sysadmin' to host 'CIS '. Could not generate the HTML page. Unable to evaluate the function. Error running system. wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter. [Details]

  An error has occurred. The stack trace below shows more information.

  !csUserEventMessage,sysadmin,CIS!$!csPageMergerUnableToGenerateHtmlPage!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!csUnableToExecMethod,evaluateScriptEx!csDynHTMLServerScriptEvalError!$Missing required path parameter for ssWeblayoutUrl.

  intradoc.common.ServiceException:! csPageMergerUnableToGenerateHtmlPage

  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)

  at intradoc.server.Service.buildServiceException(Service.java:2271)

  at intradoc.server.Service.createServiceExceptionEx(Service.java:2265)

  at intradoc.server.Service.createServiceException(Service.java:2260)

  at intradoc.server.Service.buildResponsePage(Service.java:1314)

  at intradoc.server.Service.doResponse(Service.java:2076)

  at intradoc.server.FileService.doResponse(FileService.java:1469)

  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)

  at intradoc.server.Service.doRequest(Service.java:1890)

  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)

  at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)

  at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  Caused by: java.io.IOException:! csDynHTMLSystemExecutionError, csDynHTMLReportMsgFunction! $wcmUrl

  at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

  at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

  at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

  at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

  at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

  at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

  at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)

  at intradoc.server.Service.buildResponsePage(Service.java:1267)

  ... more than 10

  Caused by: intradoc.common.ServiceException:! csUnableToExecMethod, evaluateScriptEx

  * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

  ! csDynHTMLNoStack! $

  !csDynHTMLErrorMessage,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents//mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!$

  -& #62;      & #60; WCM:element name = "linkUrl" & #62; [(--\!--$wcmUrl('resource'\, '')]; & lt; / span & gt; & #60; / wcm:element & #62;

  in sitestudio. SSClassHelper.invoke (unknown Source)

  in sitestudio. SSScriptExtensions.evaluateIncludeXmlEx (unknown Source)

  in sitestudio. SSWCMScriptExtensions.resolveWcmUrl (unknown Source)

  in sitestudio. SSWCMScriptExtensions.evaluateFunction (unknown Source)

  at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

  ... more than 17

  Caused by: java.io.IOException:! csDynHTMLServerScriptEvalError

  at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)

  at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)

  at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)

  at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)

  at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)

  at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)

  at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:2060)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1872)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1836)

  at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1794)

  at sun.reflect.GeneratedMethodAccessor500.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  in sitestudio. SSClassHelper.invokeRaw (unknown Source)

  ... 23 more

  Caused by: intradoc.common.ServiceException: path of access is required for ssWeblayoutUrl parameter.

  * ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $

  ! csDynHTMLStackElementWithFilename,wcmUrl,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents/generalmodule/mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!$

  ! csDynHTMLServerScriptEvalError

  in sitestudio. SSScriptExtensions.evaluateFunction (unknown Source)

  at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)

  at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)

  Therefore I don't see the placeholder to correct the link. How can I fix this, or at least manage the display of the placeholder.

  Concerning

  I don't think the resources without the dDocName specification will work (for example [!-$wcmUrl ('resource', ")-]).

  At some point, the code path probably leaves the SiteStudio component and goes back to the core code WebCenter content to fetch the revision. It seems that it is where he meets a problem (impossible to find the last out for review).

  If you turn on additional detailed complete tracking for site *, file * and system * this gives you a clues?

  Jonathan

  https://jonathanhult.com