Resizing of text containers based on the size of the adjacent Image components
I have a strange problem related to the size of a text element. Basically, in my application, I have all hbox 1000 pixels wide with a component of the image on the side of left hand which is not scaling and its content is dynamic which means that when you click on certain items that it changes in size and width, etc., as an image larger or smaller is charged in it. In the same hbox to the right of the present, I have a text box that is also populated dynamically by different text in this way.
The height and width of the image of the components is not defined and is not text, boxes because like I said I want that they be filled dynamically, but I'm going to limit the width of the image of setting, is a maximum width of 600, but what I want is that the image is resized to take over a large part of the area h I want the text box, to take the rest of the hbox with it is the flow of text on the following lines below. At the point where the text just seems to be flowing outside the hbox through her box Cup right so to speak without going to a new line when it reaches the edge of the hbox.
I don't have a lot of experience working with dynamic text. Can someone give me advice on this or tell me how to fix? Thanks for your suggestions.
Affecting usually the width of the text box to 100% done deal regardless of the Image occupies no space. It doesn't work?
If this post answers your question or assistance, please mark it as such.
Greg Lafrance - Flex 2 and 3 certified ACE
www.ChikaraDev.com
Flex / development, training, AIR and Support Services
Tags: Flex
Similar Questions
-
During the insert, the program monitor does not display the adjacent images
On page 207 of the manual, it says:
The program monitor can help you determine where to place a clip you add to a sequence. During a change of crush it, it displays the images
in the adjacent sequence for the new clip head and tail. During a montage of the insert, it displays the adjacent images at the insertion point.
When I drag a clip in the project Panel in a sequence, everything works as indicated in the manual. And when I drag the same clip with the program monitor, everything works still fine - but I don't see any adjacent items displayed. How to view?
This works when you drag the movie, not the program monitor.
-
Change the text displayed, based on the threshold value
Hi users of Labview,.
I need help with display and editing text in labview.
The text should display and change according to the following conditions:
0 volt - "no power".
1 volt - "controller ON".
2 Volt - "Rotor Running"
3 volt - "Rotor stopped".
Based on the voltage read by the channel, the text must be displayed and modified on the same area of the front panel. For example, initially it will be 0 Volt and the text "No power" should appear as an indicator of text (and not as a warning message). He needs to change ' controller we ' when the chages of voltage from 0 to 1 volt. The canal reads the analog input voltage (range 0 - 5V).
I'm relatively new to labview. So please give me pointers or from suggestions on how can be done. Any help is greatly appreciated.
Thank you
REDA
Hello
Thanks for the crossrulz of notes, have not used the front threshold. For this simple example, it is "symmetrical", but I can see how the values in the table have been does not correspond to the index position that is so true useful. Learn something every day, I could not resist, wanted to try.
OK, here's a sample VI that puts a custom message based on the crossing of a threshold. Home work is to study the components before asking to :-)
The dice are the analog signal of 0 to 6. He rounded to the whole number to provide the index number. Power is the index number in the index table, the table being hard-coded text messages.
Two additional indicators may be deleted, useful to see what is happening.
And get rid of the value 0 if you want the text to match the number, he he he
Enjoy.
-
How do fill you a text field based on the entries in other text fields?
I would like to be able to have a text field that fills as 'Full' or 'Incomplete' based on the question if all required fields have been filled or not.
For example, if the "First Name", "Last Name" and "City" text fields are not filled, the text of "the State of completion" field displays 'Incomplete' and once they are filled, the text of "the State of completion" field will turn into "Complete".
How can I do this using javascript? I searched the web for a tutorial, but most of the results seems to be focused on the menu drop-down.
Please point me in the right direction!
Try the script below. I put this on the calculate for Field1 event
If (FirstName.rawValue == null |) LastName.rawValue == null | City.rawValue == null) {}
Field1.RawValue = "incomplete."
}
on the other
Field1.RawValue = "complete."
-
Conditional display in the text box based on the calculated value
Hello
I have radio buttons that each have a numerical value. For example = 1 A = 2 C = 0. In the example below, the total is equal to 5.
The sum is displayed at the bottom of the document and is passed to another text box:
Instead of '5' displayed in the text box on the right, it should display a "Control" Word like this:
The displayed word is based on the totals through this range:
1-2 = 'absorbing '.
3-4 = 'practitioner '.
5 to 6 = "control".
The script I used to pass the value from the left to the right text box in the chart above is:
name of the field to text box;
var cTextBox = 'Cabinet Talent strategy knowledge - total';
get the value of the field with the name in cTextBox;
var sTextBox = this.getField ("cTextBox") .value;
Set the value of this field;
Event.Value = sTextBox;
That I need to add to this script to show one of the words, such as "control" above?
I am a complete novice to scripting. I found the above script online and somehow got it to work.
I thank very much for any help or pointers, you can provide.
Best regards
Sorry, there were some errors in the code that I provided above. Try this:
If (sTextBox > = 1 & sTextBox)<= 2)="">=>
Event.Value = "absorbing";
} ElseIf (sTextBox > = 3 & sTextBox)<= 4)="">=>
Event.Value = "practitioner";
} ElseIf (sTextBox > = 5 & sTextBox)<= 6)="">=>
Event.Value = "master";
} else {}
Event.Value = "";
}
If it still does not respond, you can send me the file at [email protected] and I'll check...
-
How to print a text recognized only without the original images
I have a scanned PDF with the text recognized by using tools-> Recognize text. But when you print, it remains impressions colors or levels of gray original, even if I want to print only the recognized text. How to do?
Perhaps someone versed in Acrobat Javascript can build a script to provide a "programmatic."
I think it would be a non-trival task and therefore not provided free of charge.
Otherwise, the manual method would be necessary.
Keep in mind that when ClearScan falls on an image of a character that he does not recognize (so not even a 'suspect' is available) the image of the characters leave as a bitmap image.
When you slick "background" you can these slick (when present). Find in the printed output would be like finding the needle in a haystack.
Losing a character can have significant negative implications depending on what is in the content (1.2 seconds becomes 12 seconds).
The only way to ensure (100%) that what is printed is the scanned image is to print the scanned image.
Be well...
-
trigger events based on the current image of the flash animation
I have a Director with video qt project where are trigger actions based on specific times in the video (movietime and/or duration). I update this project in order to use flash instead of quicktime video.
To facilitate the development and coding changes minimal if all goes well, I would like to keep this similar functionality, but I can't figure out how to capture the current image of the flash movie sprite.
Can anyone help? or provide a workaround solution?
I can't figure out how to capture the current image of the flash movie sprite.
You were near. Try one of these:
put sprite("flash").currentFrame -- or put sprite("flash").frame
-
Dynamic text box to show the current image not workng
Please could someone help me. I wish that my area of dynamic text to display the current image of roots. I triedthis with no luck
frameNumberText_txt.text = currentFrame;
I'm pretty sure that the problem is because the field requires a string value. I'm not sure how to do that heh
Try...
frameNumberText_txt.text = String (this.currentFrame);
This assumes that the textfield object lives on the root timeline. If that's not solve it, and you get an error message, include the error message in your ad.
-
I have two Adobe illustrator images that are very similar, the first is 5 inches wide the second to replace is 3 inches. I just place and put the image in InDesign, but I had to change forms and thicknesses as certain proportions of the image would be just too small.
When I create a link to the file it is changing the image to adapt the existing framework of the largest. Is it possible the file repeat keeping the content of the new file to 100%. I know that I can use the grabber content to see how the content has been developed on the scale and fix it, but it's not boring where you will need to select "adjust the framework to settle later. InDesign, AFAIK, does give no warning to tell you than an image when relinked has been stretched to fit the image.
-Thank you
It is in the application, under file management preferences. Check or uncheck the box to preserve Image Dimensions when reissue of links. When checked, the relinked image will be adjusted to the same dimensions as the old version (possibly distorted). When not checked, the new image will come with the same scale as the original factor, that resembles what you want in this case for me but I am not sure (this is often true for .ai files where it is made a change that moves an element, that affect the bounding box art and you have trimmed to art or bounding box rather than media).
Sometimes, if what you want is a 100% zoom it's just easier to put the new image on the editing table and place it in position, remove the old.
-
How to resize a text box without distorting the text?
I'm trying to resize an area text, but whenever the text gets distorted. What I am doing wrong?
To resize the box, double-click its icon of layer.
The difference between a text box (aka paragraph Type) and a layer of Type normal, is that for the shape, select the text tool and click where you want the insertion point. For the latter, you click and drag to make the type box.
-
Select the value of the text element based on the selection list
Hello
I have a selection list that displays a number of codes of a table, and I want to display the description of the code (from the same table) in a field of text next to it.
The selection list works good based on an LOV, but I can't seem to find how to get the return value, so I can identify the correct description of the table to be displayed.
Thank youSee this link: http://htmldb.oracle.com/pls/otn/f?p=31517:80:6340934958598741:NO
It will have a lov that calls an application process that fills a text box...
Thank you
Tony Miller
Webster, TX -
Toggling text element based on the selection of a list item
Hello friends,
I have a header data block where I have a field to not enter the name of book and a REGD Item list that displays 'Yes' and ' ' and a text REG_NO element.
When the user selects 'Yes', the text REG_NO element must be enabled so that the user can enter the number of the book.
By choosing 'No', the REG_NO element must be disabled.
I have included a trigger WHEN-LIST-CHANGED in the list REGD item.
I added the following code in the trigger above:
--=======================================
BEGIN
IF: HEADER. REGD = ' don't
THEN
SET_ITEM_PROPERTY('HEADER.) REG_NO', ENABLED, PROPERTY_FALSE);
ON THE OTHER
SET_ITEM_PROPERTY('HEADER.) REG_NO', ENABLED, PROPERTY_TRUE);
END IF;
END;
--=======================================
However, when the form is opened, the text REG_NO element is enabled.
When the user chooses the 'no' in the list item REGD, then the text REG_NO element is disabled as expected.
However, when you choose 'Yes' in the item list REGD, the text REG_NO element does not get activated.
Can someone let me know how to activate the text element.
Concerning
Hawker
When you disable an item, NAVIGALE, INSERT_ALLOWED, and UPDATE_ALLOWED properties are also set to False, then you will need to reactivate their when you reactivate an item.
-
Fill in a text box based on the list box selection?
I'm relatively new to using scripts in forms. So I hope that someone can help me here.
I have a list box called 'Name', which uses the user selects a name. I have a text box called "DOB", I need to be filled in automatically with the date of birth of the corresponding name that has been selected.
I tried to adapt some scripts to fit my needs here, but nothing helps. Although it seems like it should be pretty easy. Any ideas? Thanks in advance for the answers.
' 1. fill the list box with the name of "and place the date of birth in the option 'value exprot '.
2. for action 'on blurr"add the following script:
this.getField('DOB').value = event.value;
When you tab or the mouse out of the list box, the value displayed in the field "DOB".
-
I have two columns of text created with tabs. I want to select the first column without selecting the second column (I want to format the first column differently). Hope it would be possible to drag a marquee on it and have it select but apparently not. Will do it line by line, but for later use, would like to know if there is a way.
David
Creates the tabbed table text would allow you to do. It will give you much more control over the formatting as well.
To change the text tabs in a table, select the text with tabs and choose table > convert text to table.
-
Hello Flexers,
because I find it a bit difficult to describe the problem I will try that after posting the code and a screenshot:
<s:Application
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
width="100%" height="100%">
<s:layout><s:HorizontalLayout/></s:layout>
<fx:Script>
<![CDATA[
import mx.core.IUIComponent;
import mx.core.IVisualElement;
import mx.events.DragEvent;
import mx.managers.DragManager;
protected function draggableLabel_mouseDownHandler(event:MouseEvent):void {
DragManager.doDrag(event.currentTarget as IUIComponent,null,event);
}
protected function leftGroup_dragEnterHandler(event:DragEvent):void {
DragManager.acceptDragDrop(event.currentTarget as IUIComponent);
}
protected function leftGroup_dragDropHandler(event:DragEvent):void {
leftGroup.addElement(event.dragInitiator as IVisualElement);
}
]]>
</fx:Script>
<s:List id="leftList"
dragEnabled="true"
dropEnabled="true"
width="200" height="200">
<s:ArrayCollection>
<fx:String>Item 1</fx:String>
<fx:String>Item 2</fx:String>
<fx:String>Item 3</fx:String>
</s:ArrayCollection>
</s:List>
<s:List id="rightList"
dragEnabled="true"
dropEnabled="true"
width="200" height="200">
<s:ArrayCollection>
<fx:String>Item 4</fx:String>
<fx:String>Item 5</fx:String>
<fx:String>Item 6</fx:String>
</s:ArrayCollection>
</s:List>
<s:Group id="leftGroup"
dragEnter="leftGroup_dragEnterHandler(event)"
dragDrop="leftGroup_dragDropHandler(event)"
width="200" height="200">
<s:Rect left="0" right="0" bottom="0" top="0">
<s:fill><s:SolidColor color="0x00FF00"/></s:fill>
</s:Rect>
</s:Group>
<s:Group id="rightGroup"
width="200" height="200">
<s:Rect left="0" right="0" bottom="0" top="0">
<s:fill><s:SolidColor color="0xFF0000"/></s:fill>
</s:Rect>
<s:Label text="DRAG ME"
color="0x000000"
mouseDown="draggableLabel_mouseDownHandler(event)"
y="0"/>
<s:Label text="DRAG ME"
color="0x000000"
mouseDown="draggableLabel_mouseDownHandler(event)"
y="40"/>
<s:Label text="DRAG ME"
color="0x000000"
mouseDown="draggableLabel_mouseDownHandler(event)"
y="80"/>
</s:Group>
</s:Application>I came across a problem recently. I wanted to be able to use drag - and list controls dropEnabled property and (on the same canvas) use the functionality of drag-and-drop automatic implemented other components (in this case, a combination of movable labels that can drag a group component). I wanted the labels to be moved in the entire screen, but only fall on the part of the Group (NOT the list). The items in the components list were supposed to be interchangeable between the lists in the set of properties dragEnabled and dropEnabled to true. The problem is that when I drag the labels of the groups on the lists a null #1009 object reference error is thrown because the list does not try to calculate the index fall for labels. I know that I could work around the problem by setting dropEnabled = false on the lists and implement drag - move by hand, but I hope that both variants of drag-and-drop coexist in a spirit of flexibility.
Any thoughts? Thank you very much!
Kind regards
Thilo
When you delete something on a spark list you will need to provide a dragSource not null in the format 'itemsByIndex', if you change your code to something like this, it should work:
protected function draggableLabel_mouseDownHandler(event:MouseEvent):void {}
do some data to pass to the list
var someData:Vector.
Maybe you are looking for
-
I had to reinstall windows and now I need to recover my bookmarks.
I just reinstalled windows and I lost the bookmarks. I had windows old folder and I read them there. I was not able to get to the app - data and by the time wherever I did, I lost the link to the path, in that these data can be.
-
Satellite L100 doesn't boot up - BIOS update problem
Hello world I was running the BIOS update I downloaded on this site, when the system hang.After a while I had to unplug the power cable to turn off the laptop. It seems that the BIOS got corructed.Now, I turn on the computer but the screen is always
-
How to let axSequenceView view the sequence file, after the opening before the race.
How to let axSequenceView view the sequence file, after the opening before the race.
-
Boost Mobile bike G - problem after 4.4.4 update
I had the soft stock Messaging disabled before I did the new 4.4.4 update yesterday. Now, after the update, the option enable it is grayed out. I think this raises problems for sending SMS through the app of Hangouts. When you try to send an SMS thro
-
Pavilion 1303au g4: Hw to update the graphics card to my laptop
model:-hp pavilion 1303au g4 Processor :-amd a4 3330mx Graphics:-radeon hd 6480 g I would like to ask whether it is possible to upgrade my built-in laptop computer graphics card to a dedicated?