RESTful service gateway timeout error

I have a number of restful endpoints on ADR via Weblogic 12 c 2.0.6 most work correctly but I have an end point which expires after about 45 seconds and I am presented with the error 500 (HTTP/1.1 "500 16384).

Any suggestion is welcome.

Endpoint accepts a parameter that presents data using one since. In the great that it works, but once the data size increases with the use of a former as date and we received the error that leads me to believe his timeout setting somewhere!

This has now been resolved.

There were in fact two errors, the size of the returned data was blowing the amount available in the FMV of the managed server (fixed increase)

The second question was the load balancer with the real server timeout value has increased from 45 seconds to listening to a value of our liking.

For those who want the config is as follows:

VIP--> balance--> 2 weblogic managed servers

Cluster Weblogic 12 c--> ADR deployed on managed servers configured for the DB JAR

CARS DB

Everything works fine now.

Tags: Database

Similar Questions

  • When you play in Facebook, I got a "GATEWAY TIMEOUT 508" error after it didn't load right now!

    When you play in Facebook, Farmville game, it didn't load right away once or twice, then I got a message that says "ERROR GATEWAY TIMEOUT 508!"

    Hello

    1. have you made changes on the computer before this problem?
    2. what browser do you use?
    3. What is the exact error message?

    If you use internet explorer, then this article might be useful.
    The problems of games online using Internet Explorer
    http://support.Microsoft.com/kb/2528246

  • Stream error when you call a REST Service

    I am doing a customer REMAINS with AS3, I followed this tutorial: http://help.Adobe.com/en_US/AS3/dev/WSb2ba3b1aad8a27b061afd5d7127074bbf44-8000.html

    My code is as follows:

    import flash.events.Event;

    import flash.events.ErrorEvent;

    import flash.events.IOErrorEvent;

    import flash.events.SecurityErrorEvent;

    import flash.net.URLLoader;

    import flash.net.URLRequest;

    import flash.net.URLRequestMethod;

    import flash.net.URLVariables; 


    var url:String = "https://localhost:8443/restcomponent/tesimalex"; 


    var requestor:URLLoader = new URLLoader(); 


    function restServiceCall():void

    {

      trace("Calling REST Service...");

      //Create the HTTP request object

      var request:URLRequest = new URLRequest( url );

      request.method = URLRequestMethod.GET;

      //Initiate the transaction

      requestor = new URLLoader();

      requestor.addEventListener( Event.COMPLETE, httpRequestComplete );

      requestor.addEventListener( IOErrorEvent.IO_ERROR, httpRequestError );

      requestor.addEventListener( SecurityErrorEvent.SECURITY_ERROR, httpRequestError );


      requestor.load( request );

    }


    function httpRequestComplete( event:Event ):void

    {

      trace( event.target.data );

    }


    function httpRequestError( error:ErrorEvent ):void

    {

      trace( "An error occured: " + error.toString() );

    }

    The only difference between my code and that in the tutorial's URL variables, that I commented on, and the url used.

    My REST service is a simple GET, if I type the url in the browser, it shows me that the returned JSON.

    But in my AS3 when I call the method restServiceCall() returns the following error message:

    Error opening URL "https://localhost:8443/restcomponent/tesimalex? An error: [IOErrorEvent type = "ioError" bubbles = false cancelable = false eventPhase = 2 text = "Error #2032: stream error."] URL: https://localhost:8443/restcomponent/tesimalex? »]

    Anyone know whats wrong?

    I really don't know about this link, but in my opinion it's a security issue, because it opens in the browser, also for security reasons! as I see that you have disabled the safe browsing that of why it works in your browser, but not in flash. In any case try to download the file on the server because the good security situation be different then check if it will work there, use a text field to display the data.

  • Is it possible to use a Type of personalized content for the REST service operation messages?

    I try to POST to the third party, documentum of EMC, REST service using service broker in 8.53 peopletools integration operations. Unfortunately, the third party only accepts a content type of 'application/vnd.emc.documentum+json', which I could not send PeopleSoft and use a message definition at the same time.

    In my service operation, if I do NOT fill the request message I can POST to the URI with the such custom content type defined in the property page of the connector in the routing. I have not found a way to do it and also present JSON content on demand, since there is no message associated with the operation. Is it possible to include in this type of message content without using a request message?

    If I DO not fill the request message I can't POST successfully because the message content-type of "application/json" gets passed as the content-type instead of the value in the property page of the connector from the routing. Is it possible to change the content type during the use of a message definition?

    Thank you

    Paul

    Hi Paul - you can turn on tracing by using the on demand connection as follows:

    1. on the routing set detail header and detail "journal".

    2. Main Menu > PeopleTools > Integration Broker > Service Operations Monitor > Administration > control installation Options

    -Enable logging of the bridge

    -On the registration of demand = 5 (to enable detailed logging)

    Note: On request connection only works for the outgoing synchronous Services. In this case, we should be fine. You will find the by transaction log file on your gateway web server... / applications/peoplesoft/PSIGW.war/WEB-INF/.

    I did it for one of the REST service operations my test (I'm on 8.52.22). I have my content type of message the value application/json to the operation of the service page. On the routing page, I added a connector property content-type=application/vnd.emc.documentum+json.

    Here are the results on the integration gateway logs:

    Message-ID:<-.................@nowhere>

    MIME-Version: 1.0

    Content-Type: multipart/related; Boundary = "Integration_Server_MIME_Boundary."

    Content-ID: PeopleSoft-internal-Mime-Message

    PeopleSoft-ToolsRelease: 8.52

    -Integration_Server_MIME_Boundary

    Content-Type: text/plain; Charset = UTF-8

    Content-Transfer-Encoding: 8 bit

    Content-ID: IBInfo

    Content-Disposition: inline

    Sync There ... * deleted for security purposes *... ContentSection0text/plainN

    CREATE5000000000000

    -Integration_Server_MIME_Boundary

    Content-Type: text/json

    Content-Transfer-Encoding: 8 bit

    Content-ID: ContentSection0

    Content-Disposition: inline

    username = * collected for security purposes * & password = * deleted for security purposes *.

    -Integration_Server_MIME_Boundary-

    The Content-Type of the delivery is sent as HTTP Connector of the target and the content of the message (text/json) Type property is always persistent (see the text in bold above). You can compare logs between your two scenarios (with and without the message in the POST) and see if you find something interesting.

    I even tried the following code to see if that helps, but I get the same results.

    & MSG. IBInfo.LoadRESTHeaders ();

    / * Adds additional headers not defined on the route * /.

    REM & MSG. IBInfo.ConnectorOverride = True;

    bRet = & MSG. IBInfo.IBConnectorInfo.AddConnectorProperties ("Content-Type", "application/vnd.emc.documentum+json", % Httpentete);

    & RESP = IntBroker.SyncRequest % (&MSG);)

    I'm working on a similar project at this moment where I'm integrating perceptual Nolij Web RESTful API (Document Management System). I had to resort to using a http client base (common of apache) java instead of broker of integration because of the similar frustrations with REST (cookies are lost, unable to deal with raw binary data in a response message, etc.).

    Benefits: Java provides total flexibility.

    Cons: As we are bypassing framework Integration Broker, we need everything (error handlng, logging, etc.) do it ourselves.

  • RESTful service cannot insert data using PL/SQL.

    Hi all
    Spin: stand-alone 2.01 AL on OEL 4.8 in box a. VM
    Database Oracle 10.2.0.4 with Apex 4.2.0.00.27 on OEL4.8 in the VM B box.

    Measure of oracle.example.hr performed without problem Restful services.

    Cannot insert data using AL 2.0.1 but works on 1.1.4 AL.
    who uses the following table (under scheme: scott):
     
create table json_demo ( title varchar2(20), description varchar2(1000) ); 
grant all on json_demo to apex_public_user;
    and procedure (scott diagram) below:
    CREATE OR REPLACE
PROCEDURE post(
    p_url     IN VARCHAR2,
    p_message IN VARCHAR2,
    p_response OUT VARCHAR2)
IS
  l_end_loop BOOLEAN := false;
  l_http_req utl_http.req;
  l_http_resp utl_http.resp;
  l_buffer CLOB;
  l_data       VARCHAR2(20000);  
  C_USER_AGENT CONSTANT VARCHAR2(4000) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0)';
BEGIN
  -- source: http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
  -- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
  -- rather than just returning the text of the error page.
  utl_http.set_response_error_check(false);
  -- Begin the post request
  l_http_req := utl_http.begin_request (p_url, 'POST', utl_http.HTTP_VERSION_1_1);
  -- Set the HTTP request headers
  utl_http.set_header(l_http_req, 'User-Agent', C_USER_AGENT);
  utl_http.set_header(l_http_req, 'content-type', 'application/json;charset=UTF-8');
  utl_http.set_header(l_http_req, 'content-length', LENGTH(p_message));
  -- Write the data to the body of the HTTP request
  utl_http.write_text(l_http_req, p_message);
  -- Process the request and get the response.
  l_http_resp := utl_http.get_response (l_http_req);
  dbms_output.put_line ('status code: ' || l_http_resp.status_code);
  dbms_output.put_line ('reason phrase: ' || l_http_resp.reason_phrase);
  LOOP
    EXIT
  WHEN l_end_loop;
    BEGIN
      utl_http.read_line(l_http_resp, l_buffer, true);
      IF(l_buffer IS NOT NULL AND (LENGTH(l_buffer)>0)) THEN
        l_data    := l_data||l_buffer;
      END IF;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
      l_end_loop := true;
    END;
  END LOOP;
  dbms_output.put_line(l_data);
  p_response:= l_data;
  -- Look for client-side error and report it.
  IF (l_http_resp.status_code >= 400) AND (l_http_resp.status_code <= 499) THEN
    dbms_output.put_line('Check the URL.');
    utl_http.end_response(l_http_resp);
    -- Look for server-side error and report it.
  elsif (l_http_resp.status_code >= 500) AND (l_http_resp.status_code <= 599) THEN
    dbms_output.put_line('Check if the Web site is up.');
    utl_http.end_response(l_http_resp);
    RETURN;
  END IF;
  utl_http.end_response (l_http_resp);
EXCEPTION
WHEN OTHERS THEN
  dbms_output.put_line (sqlerrm);
  raise;
END;
    and execution in sqldeveloper 3.2.20.09 when it connects directly to box B as scott:
     
SET serveroutput ON
DECLARE
  l_url      VARCHAR2(200)   :='http://MY_IP:8585/apex/demo';
  l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
  l_response VARCHAR2(30000);
BEGIN
  post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;
    leading to:
     
anonymous block completed 
status code: 200
reason phrase: OK 
with data inserted.
    Installation using 2.0.1
       Workspace : wsdemo
 RESTful Service Module:  demo/
          URI Template:      test
                Method:  POST
           Source Type:  PL/SQL
    and execution in sqldeveloper 3.2.20.09 when it connects directly to box B as scott:
     
SET serveroutput ON
DECLARE
  l_url      VARCHAR2(200)   :='http://MY_IP:8585//apex/wsdemo/demo/test';
  l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
  l_response VARCHAR2(30000);
BEGIN
  post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;
    leading to:
     
status code: 500 
reason phrase: Internal Server Error 

Listener's log: 
Request Path passes syntax validation
Mapping request to database pool: PoolMap [_poolName=apex, _regex=null, _workspaceIdentifier=WSDEMO, _failed=false, _lastUpdate=1364313600000, _template=/wsdemo/, _type=BASE_PATH]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
demo/test matches: demo/test score: 0
Choosing: oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as current candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
Tenant Principal already established, cannot dispatch
Chose oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as the final candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: POST demo/test
demo/test is a public resource
Using generator: oracle.dbtools.rt.plsql.AnonymousBlockGenerator
Performing JDBC request as: SCOTT
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: Error occurred during execution of: [CALL, begin
 insert into scott.json_demo values(/*in:title*/?,/*in:description*/?);
end;, [title, in, class oracle.dbtools.common.stmt.UnknownParameterType], [description, in, class oracle.dbtools.common.stmt.UnknownParameterType]]with values: [thetitle, thedescription]
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id

java.sql.SQLException: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id

        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
        at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
        at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:205)
        at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1043)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
        at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
        at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4755)
        at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
        at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
        at oracle.ucp.jdbc.proxy.CallableStatementProxyFactory.invoke(CallableStatementProxyFactory.java:101)
        at $Proxy46.execute(Unknown Source)
        at oracle.dbtools.common.jdbc.JDBCCallImpl.execute(JDBCCallImpl.java:44)
        at oracle.dbtools.rt.plsql.AnonymousBlockGenerator.generate(AnonymousBlockGenerator.java:176)
        at oracle.dbtools.rt.resource.templates.v2.ResourceTemplatesDispatcher$HttpResourceGenerator.response(ResourceTemplatesDispatcher.java:309)
        at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:88)
        at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:412)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:162)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
        at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:65)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
        at java.lang.Thread.run(Thread.java:662)
Error during evaluation of resource template: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id
    Please notify.
    Concerning
    Zack

    Zack.L wrote:
    Hi Andy,.

    Sorry, I forgot to post the Source that is used by the AL1.1.4 and the AL2.0.1.

    Source

    begin
insert into scott.json_demo values(:title,:description);
end;

    It is a failure during insertion?
    Yes, he failed in the insert using AL2.0.1.

    If the above statement produces the following error message:

    The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:

begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with

    That gives me to think that a character is not printable (notice how there is anything between the quotation marks - "") worked his way in your PL/SQL Manager. Note how the error is reported to correspond to a column 74 on line 2, line 2 of the block above has 58 characters, so a pure assumption somehow, there is extra space on line 2, which confuses the PL/SQL compiler, I suggest retype PL/SQL Manager manually and see if that solves the problem.

  • No Internet connection - Gateway Timeout

    VMware Fusion Version 2.0.2 (146107)

    New MacBook w/Mac OS X 10.5.6

    2.4 GHz Intel Core 2 Duo processor

    4 GB 1067 MHz DDR3 memory

    Startup Disk INTEL X 25-M

    Guest operating system is Windows XP Professional with Service Pack 2

    I purchased and downloaded the merger a few nights ago. As a new mac user, I managed to install VMware Fusion, and then the guest operating system apparently without a hitch. Windows has been activated successfully. The first thing I tried to do was open Internet Explorer to update the operating system. Unfortunately, I'm unable to connect to internet. After spending some time trying to load all the default is homepage, I see:

    Gateway Timeout

    The following error occurred:

    A gateway time-out occurred. The server is inaccessible.

    Raise demand.

    I read 'Understanding Networking in VMware Fusion' and tried to change the network mode from NAT to Bridged, while release and renew the IP address each time. I also disabled the Windows Firewall, which made no difference.

    All I want to do is updated from windows, and did nothing else. So far, my user experience was quite disappointing. If you guys have any advice or suggestions, I would really appreciate it. Thank you.

    AJ

    EDIT: In OS X, I installed Firefox and the official Logitech drivers, and the internet connection is fine.

    What you have relayed by now, we know that this isn't just a merger cause and resolution will come from preforming the same diagnosis and methods as if it were a physical machine.

    What version of Internet Explorer are automatically using and if IE 7 have you tried to uninstall/reinstall?

    Also, there are half a dozen or several DLLs that can be re-recorded to try to correct the problem, but I don't have the list at hand and I would be Microsoft and Google looking for infmation to solve the problem anyway.

    Also I would seek to control panel Internet Options to see if any setting is part of the issue.

    Also if you try to use Windows Update with Firefox here is part of what is being said so automatic updates is an option until the browser IE problem is resolved.

    If you prefer to use another web browser, you can get updates from the Microsoft Download Center , or you can stay up to date with the latest reviews and updates using automatic updates. To activate the automatic updates

    1. click on Startand then click Control Panel.

    2. view function Panel you use, classic or category, do one of the following values:

    Click System, and then click the automatic updates tab.
    Click performance and Maintenance, click System, and then click the automatic updates tab.

    3. click on the desired option. Make sure that automatic updates is not turned off.

  • VISA READ timeout error - several GPIB resources

    Hello

    I'm working on a network 3 GPIB instruments (Optical Attenuator, amplifier in fiber, spectrum analyser), controlled using VISA sessions in Labview. When it is run separately, the three corresponding screws (which are located in three different Labview projects) works as expected. However, when they ran at the same time, one gives them timeout-1073807339 VISA READ errors. These errors seem to occur when another instrument is sending / receiving data / instructions at the same time that she is.

    The exact context of the error is either:

    -an another VI is running, which includes sending several requests and responses every 100 ms, reading

    -by failing VI starts, I get an error of waiting time among the first Subvi containing a VISA READ operation to perform (sometimes initialize.vi (in situation 1), sometimes one of the subVIs connected the rest State (State 0) on the time-out of the structure of the event).

    or:

    -the default VI is running,

    -by starting another VI, which includes repeatedly sending requests and reading the responses, the failing VI up a mistake among the first Subvi containing a VISA READ operation to run (one of the subVIs linked the State of rest (0) on the time-out of the structure of the event).

    What I tried:

    -gradually increasing the delay between the VISA WRITE and READ operations to the relevant instrument (from 10 ms to 10 s), without success. More surprising are my observations which, by operating this single VI, increasing WRITE it / READ delay results in the same timeout errors. I have found no mention of such behavior through research google and forum. I hope that this may point to a solution to the main issue,

    -switching between synchronous and asynchronous VISA WRITE / READ operations.

    -reorganization of the network GPIB to a star to a linear topology topology (three instruments have different GPIB addresses in case anyone is wondering).

    My thoughts:

    It seems to me that the error is related to a delay introduced between a VISA request and its read operation by the transmission of another query associated another instrument in the same network GPIB. But I have no idea why pass a query to another instrument would introduce such a delay, or why this delay would result in a timeout error (and only an instrument, while writing / reading in each pilot screws are basically the same). Hopefully a more experienced Labview-er will be able to shed some light on my problem.

    Included is the project that contains the default VI (main.vi) and the driver custom made use of.

    There are a number of ways. If you want to keep separate projects for instruments, you can use semaphores often slandered around calls for screws in each project. Locking is not expected or predictable, but it would give controlled access to the GPIB resource.

  • Unable to access REST services with Apex 5.0.3 and ADR 3.0.3 in standalone

    Hello

    I'm trying to get my APEX with ADR 3.03 installation and for the life of me can not get of work REMAINS.  When I try to run the tutorial of

    Creation and use of RESTful Web application services Express 5.0

    I get the following error in the window of standalone ADR

    Journal of the oracle.dbtools.common.config.db.ConfigurationValues 12 January 2016 17:45:16

    ATTENTION: * jdbc. MaxLimit in apex_al configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

    Journal of the oracle.dbtools.common.config.db.ConfigurationValues 12 January 2016 17:45:16

    ATTENTION: * jdbc. InitialLimit in apex_al configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

    12 January 2016 17:45:16 oracle.ucp.common.UniversalConnectionPoolBase initInactiveConnectionTimeoutTimer

    INFO: connection time-out timer inactive at the request

    12 January 2016 17:45:16 oracle.ucp.common.UniversalConnectionPoolBase initInactiveConnectionTimeoutTimer

    INFO: connection time-out timer inactive at the request

    12 January 2016 17:45:17 oracle.dbtools.common.config.db.DatabasePools validateApexPoolConfigView

    SEVERE: * the pool named: apex_pu reports no APEX workspaces are enabled for RESTful Services,.

    but the pool named: apex_al reports 1 workspaces are enabled.

    This implies what APEX has been installed after the Oracle REST Data Services. Run the following command, and then restart REST Oracle Data Services:

    java-jar ords.war validate - apex of the database

    APEX based RESTful Services, including those used to serve static resources will not work until this was done.

    ***

    I ran validate it as many times it changed anything.  My REST services just returns 404.

    Someone at - it ideas?

    Thank you

    Scott.

    There seems to be a bit of chatter about the 3.0.3 in particular issues. I suggest to go back a step from version and try again.

  • [MAF - AMPA] Strange behavior of the MAF with REST service

    Hi MAF Experts.

    I just noticed that there is a strange behavior in my application of the MAF. The first loading of the page, amx:page does not make its contents (of REST). However if I kill the app and relaunch the app, content appears.

    Pattern:

    1. Start of the CRG App
    2. Opening of session
    3. Dashboard (the content is rendered)
    4. Go to any other aspect (lets say a list of products)
    5. Open product list (content do not get returned)
    6. Kill the MAF application
    7. Start of the CRG App
    8. Dashboard (the content is rendered)
    9. Go to the product list
    10. List of products (content gets rendered)

    I put a few breakpoints on EntityCRUDService and RestPersistenceManager.

    So far it return the list of entities and display the correct data (from watches in debug mode)

    Last thing I noticed is the red color below. She defined the EntityList with the new value of REST (This displays a correct value).

    TaskExecutor.getInstance (.execute (isDoRemoteReadInBackground ())

    , () -> {

    Auto Sync all actions pending first, pass false for inBackground because

    We want to process actions pending before the reading distance

    getDataSynchManager (.synchronize (false));

    The list of entities < E > = executeRemoteFindAll();

    If (entities! = null)

    {

    When an error occurs (for example server is not available, the method returns the value zero)

    setEntityList (entities);

    }

    });

    Any suggestion?

    All the rest service are configured with AutoQuery = true in the persistence - mapping.xml

    See you soon,.

    Hendry

    Hendry,

    Thanks your testcase, I was able to understand the problem.

    It turns out that MAF 2.1 has problems dealing with the advanced way in which AMPA running background tasks with the help of a thread in all of features.

    We have slightly modified the implementation in AMPA to use one thread per function and now the update issue is resolved. I sent you a link to new construction.

    We will publish the new generation soon on GitHub so that others can benefit in the same solution.

    Steven Davelaar,

    Oracle Mobile A-team.

  • Gateway Timeout problem

    With the help of a MacBook Pro 13' (mid-2012) El Capitan (Version 10.11.1). running

    Usually living abroad, came home last night and managed to connect my computer to the internet WiFi and my parents very well. Could access any Web site, ran perfectly. This morning I started having a problem where I can open only a small number of websites (Facebook, Youtube, Google, Apple, Wikipedia), another Web site gives me a ' Gateway Timeout: unable to connect to the remote host " message, even large reputable (NYT, etc.)."

    Here are the facts:

    • MacBook connects to the WiFi
    • MacBook restarted, the problem persisted
    • Reset the router (FRITZ!) 6360 Box cable, German provider is Unitymedia)-online everything has worked again for about 2 minutes, and then the problem comes back
    • All other computers/phones in the House has no problem, can access any Web site
    • Connected my MacBook to the Ether, has worked well. Yet once unplugged and tried WiFi problem returned. Ethernet plugged back in (with WiFi off), now, even the ethernet gives me the same problem
    • Software antiVirus Sophos's active and firewall settings and Web Protection were not yet activated (no idea why)
    • First time this question has occurred (connected to this dozens of times network and worked very well, but with the Mavericks) and has produced at night - everything worked fine yesterday and I am not aware of having made changes to anything.

    Found a thread with a person having a similar problem on another forum of support, but in his case, all its devices had the question so that, in our House, everything works but my MacBook. So I doubt that it is a problem with the provider or router.

    Any help would be greatly appreciated!

    AntiVirus software is Sophos.

    Uninstall completely and evaluate the results.

    Use the Remove Sophos Anti-virus program. It will be installed in the folder Applications on your Mac, unless you have moved or deleted. In this case, follow the instructions in uninstalling here: https://www.sophos.com/support/knowledgebase/122710.aspx. Beware that the effectiveness of the uninstall program is poor, a typical feature of garbage software.

  • VISA read timeout error - Keithley 2400

    I am using LabView 2010 to control a Keithley 2400 Sourcemeter on an RS-232 Interface. I want to set up a measure and take a reading (e.g. ground voltage / time)

    I took an example of "Keithley ReadOnly" library code, but the 1073807346 error to retrieve box "initialize". Then I looked in 'Initialize. VI"and found there is a VISA (timeout error?) reading error. I have attached two screenshots that shows errors. Can someone tell me how to solve the problem? Moreover, I am very new to labview, if someone could suggest a solution that is not too 'Advanced '? Thank you very much.


  • update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

    update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

    Hey lasdj,

    Thanks for posting in the Microsoft answers site!

    If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.

    To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.

    Therefore, remove the compression of the DATA directory and run together to the top again.

    Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.

    See the links below for more details:

    Windows Update error 6d9e
    http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9E 

    Install SQL Server 2005 and 2008 failures (compressed DATA directory)
    http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspx

    I hope this helps!
    Gokul T - Microsoft Support

  • Can not get my TV to connect to internet wireless gateway ping error any ideas

    I have a samsung tv have information detects the router but gets the gateway ping error

    Hello

    1. what operating system do you use?

    I suggest you follow the link and check.

    HTTP://SUPPORT-US.SAMSUNG.COM/CYBER/POPUP/IFRAME/POP_TROUBLESHOOTING_FR.JSP?IDX=150825&MODELNAME=LN46C750R2F&MODELCODE=&SESSION_ID=NJC1LW8VRG2CJYCF5QVNDHTLS14W2J43BJDHP3Y2KSJGM1ZNJ012!-1826039379! 1761676444! 7501! -1! NONE! 1298367221195

  • Service stopped with error 4294967292 (0xFFFFFFFC) special service

    I have a service on my windows 2008 Server. Whenever I try to start it, below error I get.

    "service stopped with error 4294967292 (0xFFFFFFFC) special service."

    Hi Alok,

    My apologies for the delay in the answer here.

    The question you asked is in what regards to Windows Server 2008.

    It would be better in the TechNet communities:

    http://social.technet.Microsoft.com/forums/en-us/categories

    Best regards

    Matthew_Ha

  • SQL service pack 3 error code 6d9e

    Hello. I had update sql service pack 3 error 6d9e code problems. I read a previous post who said I unzip the files in sql server, I managed to do it outside of 2 files. I get a message: an error occurred the application of attributes for the file \instapi.dll and: \sqlbrowser.exe.
    and I still get the error 6d9e. THX... martin

    Hi mowse73,

    Thank you for using the Microsoft Answers forum.  This error occurs usually when you do not have the latest service pack installed.  Please use one of the following methods to install the latest service pack.

    Method 1: Turn on automatic updates

    The best way to ensure that you receive the latest Windows Vista service pack is to turn on the auto update feature.

    To enable the automatic update feature, follow these steps:

    1. Click Start

    Collapse this includes this image

    Click all programsand then click Windows Update.

  • In the navigation pane, click change settings.
  • Select the automatic Windows Update the setting you want. If you are unsure which setting to choose, follow these instructions. Otherwise, proceed to step 4:
    • Automatic (recommended) automatically download updates that are recommended for my computer and install them: we recommend that you select this option. Click to select the day and time for scheduled updates occur. You can schedule automatic updates for any time of the day, but your computer must be on at the scheduled updates to install.
    • Download updates for me, but let me choose when to install them: this option is selected, Windows recognizes when you are online and uses your Internet connection to automatically download updates on the Windows Update Web site or the Microsoft Update Web site. An icon appears in the notification area of your taskbar when the updates are downloaded. When the download is complete, a message appears in the notification area. Click the automatic updates icon or the message. If you do not want to install a downloaded update, click Details, and then click to clear the check box next to that update to decline. Click install to install the selected updates.
    • Notify me but don't automatically download or install: Windows recognizes when you are online and uses your Internet connection to search for downloads from the Windows Update Web site or from the Microsoft Update Web site. An automatic updates icon and message appear in the notification area of your taskbar when new updates are available to download or install. Click the icon or message to view the updates. If you do not want to download a selected update, click to disable the check box next to that update to decline. Click Start Download to download the selected updates. The automatic updates icon remains in the notification area of your taskbar, while updates are downloaded. You can point to the icon to display the status of the download. To pause or resume the download, right-click on the icon and then click pause or resume. When the download is complete, another message appears in the notification area to notify you that updates are ready to install. Click the automatic updates icon or the message, and then click install to install the updates.
    • Never search for updates (not recommended): do not select this option.
  • Click to select the checkbox to Include updates when downloading, installing or advising me on recommended updates , and then click OK.
    Collapse this includes this image

    If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

    • To verify that this method worked and that the latest Windows Vista service pack is installed, repeat the steps under "How to determine whether the latest Windows Vista service pack is installed" in the section "before you try to download the latest Windows Vista service pack. If you see a reference to Windows Vista Service Pack 2 (SP2), you have successfully installed the latest service pack. If the latest Windows Vista service pack has not been installed successfully, try method 3.

    Note Before you install Windows Vista SP2, you must install Windows Vista Service Pack 1 (SP1). If you have not installed Windows Vista SP1, updates to automatic update will not install Windows Vista SP2.

    Method 2: Check the updates on Windows Update

    Although automatic updates can automatically install updates for you, you can also do it manually.

    To manually check Windows Update for updates, follow these steps:

    1. Click Start

    Collapse this includes this image

    Click all programsand then click Windows Update.

  • In the navigation pane, click check for updates.
  • Once Windows Update has finished checking the updates, click view available updates.
  • Click to select the check boxes for the updates that you want to install and then click install.
    Collapse this includes this image

    If you are prompted for an administrator password or for confirmation, type the password, or provide confirmation.

    • To verify that this method worked and that the latest Windows service pack is installed, repeat the steps under "How to determine whether the latest Windows Vista service pack is installed" in the section "before you try to download the latest Windows Vista service pack. If you see a reference to Windows Vista SP2, you have successfully installed the service pack. If the latest Windows Vista service pack has not been installed successfully, try method 3.

    Note Before you install Windows Vista SP2, you must install Windows Vista SP1. If you have not installed Windows Vista SP1, Windows Update will not install Windows Vista SP2.

    Method 3: Get the latest Windows Vista service pack from Microsoft Download Center

    This method is a little more time. However, this method is a good way to download the service pack if you have to install on another computer. Just download the latest service pack Windows Vista go to Microsoft Download Center on another computer with an Internet connection. Then, transfer of the service pack on the computer that has no Internet connection. You can also download the service pack and install it later.

    Important Before you install Windows Vista SP2 from the Download Center, follow these steps:

    • Make sure that you have downloaded and installed Windows Vista SP1. Windows Vista SP1 is a prerequisite for Windows Vista SP2. You can use the information in this article to download and install Windows Vista SP1, if you have not yet installed SP1.
    • Recommended: Install the latest updates for Windows from the Windows Update site or install the update for Ks.sys from the Microsoft Web site at the following address:
      https://www.Microsoft.com/downloads/results.aspx?pocId=&freetext=950127 (https://www.microsoft.com/downloads/results.aspx?pocId=&freetext=950127)
    • Check if your computer is running the 32-bit version or the 64 bit version of Windows Vista. If you know this information, go to the section "download". If you are unsure which version is running on your computer, follow these steps:
      1. Click Start

        Collapse this includes this image

        type system in the Search box, and then click System in the programs list.

      2. The operating system is listed as follows under System:
        • For a 64 - bit version operating system, 64-bit operating system appears.
        • For a 32 - bit version operating system, 32-bit operating system appears.

    Download Windows Vista Service Pack 2

    Windows Vista Service Pack 2 (SP2) was released on May 26, 2009.

    To install the appropriate version of the service pack, you must know whether your computer is running the 32-bit version or the 64 bit version of Windows Vista. In addition, you must be running Windows as an administrator. If you do not know which version of Windows Vista is installed, or if you need help, check that you are an administrator, visit the following Web site:

    http://support.Microsoft.com/GP/Admin (http://support.microsoft.com/gp/admin)

    Then download the correct update by clicking on one of the following links.

    Note Windows Vista Service Pack 2 is currently available in English, French, German, Japanese and Spanish.

    Windows Vista, package five language standalone 32-bit versions for English, French, German, Japanese, or Spanish (traditional)

    Collapse this includes this image

    Download the package Windows Vista Service Pack 2 five language standalone (KB948465) now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3)

    Windows Vista, package five language standalone versions 64 bits for English, French, German, Japanese, or Spanish (traditional)

    Collapse this includes this image

    Download the Windows Vista Service Pack 2 five language standalone for systems based on x 64 (KB948465) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=656c9d4a-55ec-4972-a0d7-b1a6fedf51a7)

    For more information about how to download Microsoft support files, click the number below to view the article in the Microsoft Knowledge Base:

    119591 (http://support.microsoft.com/kb/119591/) how to obtain Microsoft support files from online services

    Microsoft scanned this file for the virus. Microsoft used the most current virus detection software that was available on the date that the file was posted. The file is stored on secure servers that prevent any unauthorized in the file changes.

    Service current pack for Windows Vista is Service Pack 2.

    Download Windows Vista Service Pack 1

    Windows Vista Service Pack 1 (SP1) was released on March 18, 2008.

    To install the appropriate version of the service pack, you must know your Windows Vista (32-bit or 64-bit) platform type. In addition, you must be running Windows as an administrator. If not sure which Windows Vista platform type is installed, or if you need help, check that you are an administrator, visit the Microsoft Web site at the following address:

    http://support.Microsoft.com/GP/Admin (http://support.microsoft.com/gp/admin)

    Then download the correct update by clicking on one of the following links.

    Note If your language version of Windows Vista is English, French, German, Japanese, or Spanish (traditional), install the package five autonomous languages. The package five autonomous languages is smaller than the package of the version independent all languages and therefore faster to download. If your language version of Windows Vista is not English, French, German, Japanese, or Spanish (traditional), you can install the package of the version independent languages.

    Windows Vista, package five language standalone 32-bit versions for English, French, German, Japanese, or Spanish (traditional)

    Collapse this includes this image

    Download the package Windows Vista Service Pack 1 five language standalone (KB936330) now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674)

    Windows Vista, package version independent all languages versions 32 bits for all supported Windows Vista languages

    Collapse this includes this image

    Download the package Windows Vista Service Pack 1 all language standalone (KB936330) now. (http://www.microsoft.com/downloads/details.aspx?familyid=F559842A-9C9B-4579-B64A-09146A0BA746)

    Windows Vista, package five language standalone versions 64 bits for English, French, German, Japanese, or Spanish (traditional)

    Collapse this includes this image

    Download the Windows Vista Service Pack 1 five language standalone for x 64-based Systems (KB936330) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C)

    Windows Vista, package version independent all languages versions 64 bits for all supported Windows Vista languages

    Collapse this includes this image

    Download the Windows Vista Service Pack 1 all language standalone for x 64-based Systems (KB936330) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10)

    For more information about how to download Microsoft support files, click the number below to view the article in the Microsoft Knowledge Base:

    119591 (http://support.microsoft.com/kb/119591/) how to obtain Microsoft support files from online services

    Microsoft scanned this file for the virus. Microsoft used the most current virus detection software that was available on the date that the file was posted. The file is stored on secure servers that prevent any unauthorized in the file changes.

    For more information about what is fixed in Windows Vista Service Pack 1, click the number below to view the article in the Microsoft Knowledge Base:

    959064 (http://support.microsoft.com/kb/959064/) Microsoft Windows Vista Service Pack 1 (SP 1) frequently asked Questions

    For more information about a problem that may occur when you use this method, click on the number below to view the article in the Microsoft Knowledge Base:

    948343 (http://support.microsoft.com/kb/948343/) Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates

    Service current pack for Windows Vista is Service Pack 2.

    Thank you for using answers Forum. Please let us know how it works.

    Joseph
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for