Restoring the State of the CPU

Similar Questions

• Restore the registry keys to the initial state of work - XP NTFS and permissions

  We have a system Dell / Windows XP (32-bit) / NTFS.

  We have changed the permissions and registry keys and need to bring back them to the original state when we bought them. At this very moment the administrator cannot see the network and we think that it was something to do with the registry keys or authorization keys (more than likely the permissions).  We tried to restore the computer to several different States of known work and it is impossible to restore. We do not have a backup, but they have all the original disks that came with it. Is it possible to restore these settings?  Thank you

  Hello Tracy,.

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is beyond the scope of the answers community and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories

  Best regards

  Matthew_Ha

• restore the system to the original state

  I am running windows xp proffesional 2002 and you want to restore the factory state how to do this

  Some computer manufacturers, including Dell and HP, have a recovery partition on the hard drive of the new computers.  By pressing a special key combination when the computer starts, you can use the recovery partition to restore the computer to the way it was when it was new.

  If this is not available, you can restore the system from a restore CD provided by your computer manufacturer.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I want to restore the system to the original factory State.

  I want to restore the system to the original factory State. I did a disk backup set when I bought my computer laptop hp pavillion dv6823us origin and does not matter if I try to use or to start and try F11, or work. Device Manager indicates this cd rom works and has the latest version of the driver. When try F11 after restarting, nothing on it go to the desktop. I have tried games, music CDs and other disk and I can hear it hum and flashes but used read nothing. ID appreciate any help. Running Windows Vista IE9

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  ________________________________________________________________________

  Here are the different ways to reinstall Vista, if the recovery discs, you have done do not work

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  HP is F11

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I'm afraid only on restoring the computer to the exact state it is now.

  I reinstalled Windows Vista on a computer, I have not used in a while. I repeated the Windows Update until there are no updates and at this point, I am very satisfied with the results. What I want to do, it's something tangible, like a CD, which will restore your computer to this exact condition must - I never need to create. I don't like on registration of files, folders, programs or anything else that could be put on this computer at a later date, I fear that on restoring the computer to the exact state it is now. Any information would be extremely grateful. Thank you.

  Hello

  Better to use redundant methods. Good idea to create one after loading the main software
  you are going to use.

  Back up your programs, files and system settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Create a complete PC Backup and restore Image in Vista
  http://www.Vistax64.com/tutorials/99709-backup-complete-computer.html

  How to restore the complete computer from a complete backup and restore Image in Vista
  http://www.Vistax64.com/tutorials/99718-restore-complete-computer.html

  Vista: How to back up files or create Image
  http://www.tech-recipes.com/Rx/2039/vista_how_to_backup_files_create_image/

  How to use the full backup of PC and restore utility of Vista
  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  Acronis image - commercial program
  http://www.Acronis.com/homecomputing/products/TrueImage/

  There are other programs such as Norton Ghost and even some freeware you can find
  using BING or Google.

  -----------------------------------------------------------------------------------------------------

  For backups of data after you have your System Image.

  I prefer for the most of backup data and prefer to do it in a way that makes it easy to find and
  a restoration as well as many file. You can also burn an image of your installation from time to time to be
  able to get restored programs and then use the backups to replace the data.

  Replicator - free - excellent backup tool for backing up the data
  http://www.KarenWare.com/PowerTools/ptreplicator.asp

  How to make a backup of your data
  http://www.vista4beginners.com/how-to-backup-your-data

  ImageBurn - free
  http://www.ImgBurn.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Suspended-&gt; Snapshot-&gt; change the CPU-&gt; restore-&gt; error?

  Hi all

  ESXi 4.0. Windows 2003 64-bit.

  A user has done this:

  1 suspend a virtual machine

  2 take a snapshot

  3. Add the 1 to 3 vCPU

  4. the virtual machine works ok. But somehow the user wants to restore it back.

  5. then, to restore the snapshot to the previous state and received the error:

  The features supported by the processor in this machine are distinguished by the features supported by the processors of the computer on which the checkpoint was saved. Try to take the snapshot on a computer where processors have the same characteristics.

  As far as I know, this error occurs only if move us the VM incompatible host, but we did move any virtual machine.

  Is there something we can do to correct the problem?

  Thank you.

  You must add/change vCPU for an engine off the coast of the VM, not a suspension.

  Or have the permit for adding (and, of course, an operating system).

  André

• Restoring the articles to their original state when browsing...

  Hello

  I am a student in DPS, using InDesign, and I observed that when dragging to the left or right between the various articles, last viewed page is the same when I go back to a previous article. I've seen magazines published in the App Store... If you change to a new article and go back to the previous article, this article is on the first page, as if the user has access to the content for the first time. How can I do?

  Any help is welcome.

  Thank you!

  Clarissa

  Comment by Bob B is about as clear as you can get. There is no other way to restore the display of three times by typing the title of the folio.

  Bob

• DV7-7230us mother of HP Envy and replacement of the CPU card

  Unfortunately the notebooks has dropped and the screen broke. The machine was at the time. Also the CPU/GPU or motherboard was fried after the fall. As a result, I bought a new screen, the motherboard and the processor. The only thing different from the original installation is the processor. I upgraded to an AMD A8 to the A10. The service manual is the upgrade. My question is, when I start to restore the existing hard drive, 750g Seagate hybrid, with the original system restore dvd discs that will work? I read that these discs only recognize original equipment. Luckily I have the original hard disk with the original operating system factory and the software installed on it. This drive was almost never used so it is still in its original state. Does anyone know if I need to clone a hybrid disc, or it will allow me to reinstall the factory operating system and software? I cloned the hybrid when I first installed and did not bother trying the restore disks. Any power coming back here?  Thank you.

  Al Hebert

  Hi Al,.

  I saw your post about your recovery questions. I saw mixed results during the use of recovery with hybrid disks and solid state disks. You are right, you need the original material then I would try the clone you have created everything first and see how it goes.

  Thank you

• The CPU usage goes to 100% when running any application.

  Hi all

  Please help me with this problem. I recently updated my system from windows xp service pack 3 for windows 7 Professional. But I'm having a problem with my CPU usage. My PC starts normally and continue to operate with a processor of 2-3%, but when I run an application or process as a copy, extract, play videos or MP3s etc... He spent almost at 100%. If I quit the application, it will return to normal with 2-3% of CPU usage. I searched the whole windows forums and have seen a lot of answers about the same topic, but none of them relates to the problems of mines.  o please help me with it...
  My system configuration:
  Intel processor Dual Core
  2 GB RAM DDR2
  320 hard drive
  8129 Intel chip-set

  Hi Arun,

   

  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you receive 100% CPU usage when using any application on your computer.

  I'll be happy to help you. This problem could be caused due to the performance and maintenance of the computer system.

  I suggest to follow the steps below and we update on the State of the question.

  Method 1:

  To optimize the performance of Windows, try to use the resolution of Performance problems to automatically find and fix problems.

   

  Open the troubleshooter of Performance:

  http://Windows.Microsoft.com/is-is/Windows7/open-the-performance-Troubleshooter

   

  Method 2:

  To perform common maintenance tasks in Windows, such as cleaning shortcuts and unused files, try to use the resolution of the problems of Maintenance of the system automatically find and solve problems.

   

  Open the troubleshooting of System Maintenance Utility:

  http://Windows.Microsoft.com/is-is/Windows7/open-the-system-maintenance-Troubleshooter 

   

  Method 3:

   

  Follow the steps in the link below.

   

  Optimize Windows 7 for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4:

   

  Follow the steps in the link below.

   

  Ways to improve your computer's performance:

  http://Windows.Microsoft.com/is-is/Windows7/ways-to-improve-your-computers-performance

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

   

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Process creates the CPU to overheat and the Fans to run like crazy:

  I am ripping DVDs on different Macbook cradle fully aware that it's requiring treatment.

  The 2011 with 16 GB of ram and hard disk SSD, the process runs on 330% of the processor, blasting the ability and heat

  revolves around 100 c/213 F.

  Interesting enough the same process on 2 late Mo Pro 2008 with less ram do not overheat in the extraction process. The program are identical on all the Pros of 3 MB. The processes are the same, but on the old MBpros the processor load is between 130-150% up to more heating is not that great a problem.

  But the MBPro of 2011 with top material tearing overheating of the processor and fans running at full speed.

  I noticed that too much work with other programs or is running only a few programs at the same time seem to heat from the processor and the fans make some noise + cpu run hot with my MBpro 2011 and El Capitan.

  It is possible to restrict a program that use a large part of the resources to avoid overheating?

  Other solutions?

  Well a Late 2008 Macbook Pro has a intel core 2 duo, so the max he could run is 200% (2 CPUs time 100%) if the application can do enough on 2 processors in parallel.

  Your 2011 Macbook Pro has very probably a 4 core CPU intel i7 with hyper-threading.  If an application can use hyper-fils, there is a potential of 800% max.  The 330% could just be that the DVD cannot keep up with the CPU, so it does not hit its maximum potential because of the famine of data.

  I don't know if the speed of the DVD drive in 2008 was the same as the 2011.  If the 2011 is able to read data more quickly than the 2008, then it can provide given the CPU faster, keep the much busier CPU so it can consume more power, and more power consumption more than the heat generated.

  MacBook pro 2011 ends a DVD in less time than the 2008?

  Basically, you are trying to compare 'Granny Smith' vs 'Golden Delicious' apples and expects the same taste.

  Regarding the other programs, put this SSD in your Macbook Pro means that any code or data that the application needs to get the disc are convinced order or magnitude faster, so that the application did not slow the CPU and keep crank, causing the CPU to keep them busy and thus attract more power, which is converted into heat causing fans to run.

  It is also possible that your SSD generates more heat.  Solid State does not always mean longer running costs.  Much would depend on the brand and the model of the SSD and it is the power profile, and it draws more power for writing vs readings, and how much nature more expensive power you're done.

  Information point.  I put an SSD in my 2009 27 "iMac and it works more hot because my iMac can do more in less time.  I put an SSD in my Macbook Pro 2011 and if I ask him to do a lot of work, like backups, it starts its fans, as the SSD is always quick to provide data for backup, there is no waiting for the discs, leaving the lower idle CPU.

• I can't open any programs on Firefox I installed on my other computer after restoring the computer.

  I've been a Firefox user for as long as I remember and don't remember having these problems until I insttaled 34.0.5 I mainly used Google as my search engine and sometimes of yahoo.

  Whenever I try to open say yahoo or google to install as well as many other sites of the first ir goes to the speed of google search yahoo search as I put it as my search engine. I don't like the fact that I have no choice I want to default search engine. Can't I noticed that all means to eliminate all other Vosteron, it's the first probelem.

  I search for yahoo.com, so I can install it on the computer and get this error message or warning with a yellow box at the top left with a crossing guard fig. He said: this connection is Untrusted. I get it again and again and again, on any other site I tried opening in the past three days.

  I don't know what to do, I have tried everything: config and reset the SSL 2-to-1. I still get the connection it is Untrusted. Even tried to add an exception, but it still gives me this annoying message. At this point, I don't know that I have some kind of malware, or what. But I did not put many programs back on the meaning of the computer I restored Win 7 on a new hard drive.

  I hope you can help me get this fixed annoying problem once and for all. In the contrary case, it Safary.

  Restore the Firefox default state

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information. Consider using it before going through a long troubleshooting process.

• Cannot restore the iPod

  I read the discussion for corrupt iPod Classic and tried all of the listed suggestions.

  The iPod is not recognized by iTunes (latest version for my MacBook) and does not appear in the Finder.

  When you run the diagnostic tests, he said the "cannot open device" and underneath that says "ERROR!" «Stop diag»

  It does not appear in the disk utility so I can't try to repair the disk.

  I tried restoring the DFU on the MacBook.  When I did this and open iTunes, it appear a message about restoring the iPod and has continued to prepare for the iPod but nothing ever happened.  I left that he connected for at least 20 minutes.

  I also tried to plug it into our Windows laptop and it was acknowledged in the Manager of devices like Apple's USB device, but not in iTunes.

  Any other suggestions?

  See iPod displays an icon 'X' Red - Apple Support. Apple may not have much interest in the classic iPod service. The line was removed some time ago. I would normally say that you look at corrupt iPod Classic, but if the error message indicates that the drive will not mount so you will not be able to read the stats.

  See this recent post by Kenichi Watanabe - Re: iTunes save my iPod Classic 160 Gb -which gives a link to a possible replacement of DIY drive.

  TT2

• Does not restore the values of form for the restoration of the tab

  Part of my Web site uses a large number of forms on a single page. On the page, you can filter items (each item has its own form) and modify them. One entry looks like this: [name] [select status] [other Select]. Other important things are that the document has an expiration date in 1981 (to apply a page always up to date) and that change the value in the select results in the triggering of an AJAX function.

  It works perfectly, except for one thing. When filtering State id 1, you get back a little of the element. Let's say that the result of the filter are input 5. Change entry #2 status, which triggered an AJAX function. It works very well, but here's the problem: when close the tab and re-opening with Restore tab, select values become disheveled.

  Due to the execution of a fresh copy of the page, the browser will get a new copy of the page. Entry #2 is now gone (I'll keep calling it that, even if she disappeared because of the filter). Now, here's the problem: Firefox is attempting to restore the value to select it. Entry of the status #3 now has the same status of entry #2, #4 a #3 status and so on.

  I managed to solve this problem on other browsers (Chrome, IE) with this little piece of jQuery:
  {$(document) .ready (function ()}
  {$("form[class^='startingformname']").each (function ()}
  This.Reset ();
  })
  });
  It works perfectly, except for Firefox, which seems to ignore the call to reset...

  As this text is quite long, I'll keep my short question: How do you keep Firefox restore the values of the form (preferably: keep them on the selected item in the HTML)? Now, the user always gets a new copy of the page, and Firefox is trying to restore the old values on this page, even though the HTML code has changed.

  I think your two choices is:

  (1) prevent Firefox from page caching, or
  
  (2) use a different event to trigger your reset function

  As I understand it, the function $(document) .ready jQuery () raises the event DOMContentLoaded (or equivalent, if not supported by the browser). If the tab is cached in its ' cache fast back-forward ", Firefox can not fire this event when the user returns to the tab, just like Firefox does not always raise the load event in such cases.

  Discover the event more described in the following article and see if you can use it to trigger your reset function in Firefox: https://developer.mozilla.org/docs/Using_Firefox_1.5_caching

  Who is?

• How to restore the bookmarks after an emergency backup who left only the bare remnants files of Mozilla?

  Stats: Windows 7 Home Premium 64 bit operating system. Currently using Firefox 22.0.

  Details: Before that, I had an outdated version of Firefox are installed which I do not know which one it was. It may be 2-3 versions before version 22.0. I had a few hundred Favorites on Firefox when my computer became suddenly blue screen and I quickly restored it using emergency backup software that is built with the computer. It basically restored the computer while safeguarding * MOST * files from the previous installation.

  Fast forward, I went to see if I could pick my favorites, but only left value files were in the APPDATA roaming and APPDATA local files. This is the profile folders, but there is virtually nothing in it that can be opened or used. As records skeletons without meat. There are thumbnails of Web sites previous that I visited on the last installation, and that has been about it.

  I tried to see if I could copy the old empty profiles folder in an attempt to use the Profile Manager and paste it into the new installation of Firefox, but I couldn't open the Profile Manager.

  I read the articles that have been recommended by the website so feel free to submit your questions and assistance. Anything help! I have re-learned a useful lesson, always save your bookmarks!

  How can I return my favorites?

  Oh not at all, it's my fault for not not being prepared. It's a good lesson to learn to always save files especially with huge storage of our days. Back in the old days, they would use the floppy drives that were considered the height of storage technology!

  No, I have never had an account to sync with Firefox but will have to keep in mind for future cases of lost bookmarks. However, what was lost is found again! One way or another!

  Thanks for the suggestions!