Restricting the views to DISPLAY ONLY the rows CreatedBy current connected user

Similar Questions

• Photosmart 7760: restrict the rows included with normal printing

  I cleaned cartarages, calibrated printed page and test page. The colors are great. Prints all documents, but added random horizontal lines close interval about 1 centimeter on paper. At the end of the text, the lines bow down and then make a vertical line. My computer is Windows XP and my laptop is Windows 8. I've only used the windows 8 during about six months. It has always worked fine until 4 days ago. Help, thanks!

  Catfez

  Hello @catfez,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of quality of white lines that you encounter during your computers print to your HP Photosmart 7760 Photo Printer today. Thank you for all the troubleshooting steps you have already tried before reaching out for support. The white lines are usually caused by a clogged nozzle of ink on one or all of your cartridges. Or, this issue may be caused by a bite of the contacts in the cradle of the cartridge inside the printer you. To solve this problem please can I you follow the steps below.

  To start can I please have you click on here. Once the support document opens please do run the steps listed to make sure that your cartridges and cradle are clean in your printer. I understand that you already ran a cleaning before reaching out for support; However, cleaning in the Toolbox of HP printer may need to be tested up to three times to resolution. For further instructions on how to manually clean your cartridge one cartridge cradle please click here.

  Once the troubleshooting is complete please test print to see if the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Current connected user returning 'anonymous' in the environment of the client only.

  Hi all.

  We are having trouble getting to the user currently logged on our faces / ADF / BPM Workspace application running at the customer.

  First of all we try this:

  Director main = ADFContext.getCurrent () .getSecurityContext () .getUserPrincipal ();

  Or

  String userName = ADFContext.getCurrent () .getSecurityContext () .getUserName ();

  Or

  FacesContext.getCurrentInstance () .getExternalContext () .getRemoteUser ());

  And all variants of this return 'anonymous' as a user.

  I don't know if the two problems are related, but if we try to get through WorkflowContext we had a warning "not secure", followed NullPointerException.

  As this code:

  IWorkflowContext wfContext = ADFWorklistBeanUtil.getWorkflowContext ();

  String userName = wfContext.getUser ();

  Output:

  < 3 December 2014 11:03:34 BRST > < WARNING > < oracle.soa.services.workflow.worklist > < BEA-000000 > < < >. WorkflowService.getWorkFlowContext () - the application with context path: / workflow/InfraeroUI is not secure. It is strongly recommended to secure the applications of task details. >

  < 3 December 2014 11:03:34 BRST > < error > < infraeroui.mbean.AbrirPecBean > < BEA-000000 > < Erro na inicializacao:

  java.lang.NullPointerException

  at oracle.bpel.services.workflow.worklist.adf.ADFWorklistBeanUtil.verifyContext(ADFWorklistBeanUtil.java:767)

  at oracle.bpel.services.workflow.worklist.adf.ADFWorklistBeanUtil.getWorkflowContext(ADFWorklistBeanUtil.java:722)

  at oracle.bpel.services.workflow.worklist.adf.ADFWorklistBeanUtil.getWorkflowContext(ADFWorklistBeanUtil.java:677)

  at infraeroui.mbean.AbrirPecBean.initialize(AbrirPecBean.java:230)

  ...

  I guess that our problem if the same thing that these unanswered question here:

  https://community.oracle.com/thread/3562505?start=0 & tstart = 0

  Despise these errors, if I look for the user name (I know is the current) in LdapIdentityStore (see below), he finds the user properly.

  Ctx JpsContext is JpsContextFactory.getContextFactory () .getContext ();.

  LdapIdentityStore ldapIdentityStore = (IdentityStoreService.class) ctx.getServiceInstance (LdapIdentityStore);

  UserManager uMgr = ldapIdentityStore.getIdentityStore () .getUserManager ();

  User name is "t808835673".

  User user = uMgr.searchUser ("t808835673", new ReadOptions());

  String name = user.getName ();

  System.out.println (Name); t808835673, found.

  Some info from the environment:

  WebLogic Server: 10.3.6.0

  Middleware: 11.1.1.7.1

  I guess it is a matter of settings for weblogic/bpm.

  Thanks in advance.

  Gabriel Stabel

  Well, we found a solution.

  In our case, the problem was a parameter missing (automatic by JDeveloper removal v11.1.1.7.1) in our page human task workflow configuration file (_TaskFlow.xml).

    
        bpmWorklistContext
        #{pageFlowScope.bpmWorklistContext}
        
      
  

  Without this parameter, we had a problem in the customer environment, but not in ours. Probably of slightly different versions components question about.

  With this setting the code below works in both environments.

  String userName = ADFWorklistBeanUtil.getWorkflowContext().getUser();
  

• How to get the value of current logged user in the responses

  Dear all
  
  I want to create a report in responses where I'll show only aware of the user-specific data.
  
  For example: If user A is logged into the application, I want to display A user-specific reports (like the last 10 transactions carried out by the user has, pending sales for user A report, etc.).
  
  Pointers?
  
  Also how to display user and group name in the title of a report?
  I tried @{USER}, @{GROUP}, @{NQ_SESSION. The USER} etc., but it did not work
  
  Thank you

  Set your filter "is equal to / is in" then click on the Add button and assign the Variable-online Session. On the Variable of Session text box, type 'USER' and it will work.

• Enter the Total of the current connections/users in Flex

  Hello

  I know that this can be answered in a number of ways, and I tried to search for him.

  I want to know how can I know how many users are connected to the same FMS application into a flex application:

  public function totalConnectedUsers():void{
  
  lblText1.text = "There are a total of " + bindableUserVariable + " Users Connected to the Stream Now";
  
  }
  

  Thanks for the help.

  Took a bit of time, but here it is:

  http://www.fmsguru.com/showtutorial.cfm?tutorialID=48

• DBA_TABLESPACE_USAGE_METRICS display only shows UNDOTBS2 on node1 of the RAC 2node (11.1.0.7.0)

  Greetings,

  I am facing a weird problem on my production db where querying the view of DBA_TABLESPACE_USAGE_METRICS only 1 row (UNDOTBS2) of return on a RAC 2node node1.

  Whereas, node2 returns information about all the tablespace. I can't find the cause of the difference.

  DB Info:

  OS - AIX 6.1

  DB - 11.1.0.7.0 (node 2 CARS) on ASM

  Kindly help me to solve this problem.

  Rgds,

  G Pal

  Bug 6629893  Inconsistencies in DBA_TABLESPACE_USAGE_METRICS confirmed 11.1.0.7. I would like to raise a SR, this looks like a bug.

• Line display only 1 in a table view

  Pls... is there a way to display only 1 row in a table view (OBIEE 11 g)?

  (I know it's possible in the narrative view...)

  TXS

  A.L.

  Try with pagination option in a table view. You can display a single default line.

  Thank you

  Prasanna

• How show only last row value in a column of OBIEE

  Hi Experts
  
  How show only last row value in a column of OBIEE
  
  
  Thank you
  V

  Hello
  Pull column criteria, which you want to display only last row. Filter Advanced sql apply now to this column as a.
  RCOMPTE ("customer D1". "C1 Cust Name") = MAX (RCOMPTE ("customer D1". " Cust C1 Cust Name name')) here is the column where I applied the filter.
  So, it gives only last row in the name column of the Cust.

  Awarded points if the answer
  Reference: http://forums.oracle.com/forums/ann.jspa?annID=939

  Kind regards
  Srikanth
  http://bintelligencegroup.WordPress.com/

• Can we restrict the number of table rows to display on a page that is only 2 or 3 rows appear? How to do this?

  Mr President.

  Can we restrict the number of table rows to display on a page that is only 2 or 3 rows appear? How to do this?

  Concerning

  Tender,

  Set the RangeSize property on the table.

  See you soon

  AJ

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• AF:selectOneChoice returns only in the rows

  Hi all
  
  I created an af:selectOneChoice on the page. The underlying query returns lines > 50, but when I run the page from the drop-down list shows only 25 values. Can you please how to remove this restriction and view all rows returned by the underlying query of the VO.

  Hello

  on the iterator in the PageDef file, set the property of RangeSize-1 (default in JDeveloper previos versions is 25). The value - 1 will extract all lines

  Frank

• How can I get the data view to display the same amount of time I save?

  I use the Sound and Vibration Measurement Suite.  In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall.  I am also showing strength in numbers group for several bands and doing cutting-edge research.  I record 100 ms of the transient wave.  In the data view, why the temporal plots show several seconds of data?  What determines how much time will appear in the data view?  More important, the power spectrum reflects the power for the entire of several seconds of data displayed?  Same question for power in the values of band and cutting-edge research.  I want to just this data displayed for 100 ms of the wave that I record.  So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?

  Finally, what is the best way to make account concisely the recorded data?  By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc..  I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care.  Help?

  Hi TimRsandiego,

  SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.

  If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:

  Let me know if you have any other questions.

  Kind regards

• Entry list to display only 5 in the region from the list

  Dear friend

  I want to limit the entry of the list area of the list.

  I created an html region and create another part of list as a child of the HTML area.

  I created the dynamic list ABC. There are 30 entry in list in list ABC.

  I want to display only 5 ABC list entry in the list area and to know all the entered list user can click opton more at the bottom of the region.

  How can I restrict the list entry in the list area.

  Thank you

  query like this

  Select ename, empno from emp r d where ROWNUM<=>

  Leave.

• The program panel displays only the zoom-in video

  Hello!

  I just downloaded Adobe Premiere Pro CC 2014 and I can't view the video in the Panel of the program. The source of left panel shows full display while clip that the program on the right panel displays only the zoomed video (see below). Is it possible to change this? I am trying to edit the video in accordance with a separate audio file and need to see the entire video as I edit.

  Thank you!

  

  It seems that it is doing things and your fair sequence is not sized according to the vertically oriented video. The source monitor panel displays the whole image because it didn't fit in a sequence that does not match the press.

  You must determine which parameters you want for your sequence (e.g. 1080 p 30 fps), add media (within the parameters of sequence, you gave) and adapts the video to fit black leaving on each side. Alternately, you could just drag the video file on the "new element" in the bottom right of the project Panel to a new sequence with the settings automatically according to the media, but then you will end up either cropping when exporting, or with a record high rectangular movie that not match most of playback environments. It is a common problem with all the video side that people these days with their phones and others. The video is inherently horizontal unless you look at it on a handheld device that has no particular 'up' direction.

• Display the data in the row selected in a table

  Hello
  
  I searched for any thread containing my question, but I find no related posts. So I'm posting here
  
  I have a table that is bound by a VO object. I also have a box that has OutputTexts that are related to the attributes of the same object of the VO. My question is, can display us the data in the row of the table selected in the Panel without programming box? If so, how? Otherwise, what is the best way to achieve this programmatically?
  
  Thank you very much

  Hello

  If in the table, you have a column with a component that has the value = "#{rank." DepartmentId}"(OR" #{row.bindings.DepartmentId.inputValue} ')
  to view the DepartmentId field text outside the table, you must value = "#{bindings." DepartmentId.inputValue}.

  You can use the Drag Drop to do this, but make sure that in the line of page definition. DepartmentId is related to the iterator as well as links. DepartmentId.

  Gabriel.