Review of the show output directly in the Web page

Similar Questions

• Output on the web page

  Hello
  
  I have a requirement were based on the context menu control button I will be directed to a page (ABC.jspx) say jspx.
  There are several buttons context menu which directs to the same web page (ABC.jspx).
  The only difference will be that, based on what command button, actually, I clicked on I need to show the components inside the web page as visible while some as invisible.
  Is there a way to implement it.
  
  Any help will be appreciated b?
  Thank you
  Rohit
  
  Published by: rohit6699 on Sep 21, 2011 03:42

  Hello

  Use the visible attribute of your components (parent or child) search only:

  visible="#{pageFlowScope.yourBeanBean.paramButton eq 'A'}"                                   
  

  or you can create a parameter bean you (ie: isButtonA) who wrote the check and get the result in your visible attribute such as:
  in your bean:

       public Boolean getIsButtonA() {
            return "A".equals(paramButton);
       }
  

  in your JSPX:

  visible="#{pageFlowScope.yourBeanBean.isButtonA}"                                   
  

  Jack

• When I try to refresh the Web page it say upload in progress, but does not show the State

  When I try to refresh the Web page it say ongoing upload, but does not show the State, so I don't want to close the browser, but I want to know how much longer it will take to complete the download.

  Hi Dana

  When you download to revel in adoberevel.com, you will not get a time remaining indicator. If please do not close the browser or your download will be completed. Download time is dependent on the type and the size of the file and your connection speed.

  Guinot

• For the last week, I had problems on the Web pages in the browser look at a box itself (the box that actually shows the site), I can't click on anything anyone in the top thumb or inch - and a quarter. What does this, and how can this be repaired?

  This applies to all links and anything in this field unless it falls below, then I can click on it. The only thing that seems to get around it, is on a bar at the top of a Web search, I can click and type, but there is no text cursor.

  This problem occurs even when I scroll down, the same area of a Web site can be clicked, because of this problem.

  This does not affect the toolbars, bookmarks, etc..

  Recently, the Yahoo toolbar and the extension of Babylon have been reported because of this problem. They appear to overlap invisibly on the top of the display of the web page. You have both installed, uninstall or disable them / it or see if an update is available that solves the problem.

  • See-> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
  • See-> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
  • See-> http://kb.mozillazine.org/Uninstalling_toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  You have several older versions of Java installed Console Java did not clean up when updating. Follow these instructions to remove older versions:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  Your old extensions Java Console:

  • Java Console 6.0.05 {CAFEEFAC-0016-0000-0005-ABCDEFFEDCBA}
  • Java Console 6.0.07 {CAFEEFAC-0016-0000-0007-ABCDEFFEDCBA}
  • Java Console 6.0.12 {CAFEEFAC-0016-0000-0012-ABCDEFFEDCBA}
  • Java Console 6.0.13 {CAFEEFAC-0016-0000-0013-ABCDEFFEDCBA}
  • Java Console 6.0.14 {CAFEEFAC-0016-0000-0014-ABCDEFFEDCBA}
  • Java Console 6.0.15 {CAFEEFAC-0016-0000-0015-ABCDEFFEDCBA}
  • Java Console 6.0.21 {CAFEEFAC-0016-0000-0021-ABCDEFFEDCBA}
  • Java Console 6.0.22 {CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
  • Java Console 6.0.23 {CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
  • Java Console 6.0.24 {CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
  • Java Console 6.0.26 {CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Firefox does not open in full screen on the task bar and I have to go over it to see the web page.

  Firefox does not open in full screen on the task bar and I have to go over it to see the web page.

  Firefox window is sometimes "off screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt. You can delete this file and Firefox will return to standard window resizing.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the start search bar menu type or paste the following and press Enter to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  Then, to re - light bars, you can use one of the following methods to view the list of the toolbar, and then select the desired bars it:

  • Right click on a place empty on the tab bar (or the button '+')
  • Press the Alt key to activate the classic menu bar > view > toolbars
  • in customize mode > show/hide toolbars (see: Customize Firefox commands, buttons, and toolbars)

  To activate the menu bar, toolbar bookmarks or other bars, click it in the list.

• OfficeJet 4630: unable to print the Web page

  I can print document 2013 word without difficulty.  But when I try to copy a Web page unable to do.  There is no icon/button to print.  What impression of Word I click file print and choice drop dpown on the left of the screen with the print icon.

  Y at - there a special setting that I need to adjust on my computer to print directly on a web page?

  Hi @macbqe,

  I read your post and see that it is not a print option to print from the browser. I can help you with this.

  What browser do you use?

  Try another browser to see if you have the same results.

  Most likely, the menu is hidden in the browser.

  You can try to hold down the button of keyboard control and then press the P button on the keyboard to see if you get the print window. Select your print, and then click on print.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Exe to post on the Web page instead of vi?

  The method below can publish only vi on the Web page with few clicks of buttons, no exe it seems. But the program would be on the client computer, we don't want to show the source code for vi and want to use exe instead.

  http://zone.NI.com/reference/en-XX/help/371361B-01/lvhowto/creating_html_documents_an/

  Is it possible to publish the vi in exe in a webpage without having to build the web page from scratch like the method above?

  How can I use LabVIEW remote façade panels executable?

• Cannot display the web page.

  I have a Dell latitude D600 with built-in wifi.  I am not able to connect to the internet with it more.  It shows that it is connected to the 100% signal.  I bought an external ralink wifi adapter and it worked for a while, as well as internal.  It shows that I am connected as well, but cannot set up all web pages.  They all say the same "cannot connect to the web page.  What could go wrong.  I tried restoring the system without result.  The ralink has worked well for a few weeks.  I took it to where I bought it and they said it was very good.  Can anyone help?

  Hello

  When it says connected but does not really provide Internet connection, this means that the wireless card works and can see the signal but cannot connect wireless router and get an IP address.

  If you can use a cable to connect the newspaper of router (read the manual of the router) to the menu of the router and check the wireless setting.

  Disable wireless security and see if you can connect without security.

  Once you activate the security.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack, MVP-Networking. EZLAN.NET

• Why red x now appear on the Web pages instead of photos?

  Before yesterday, I have never seen red x, the kind that you do a right click on the picture to show. Now I have all red x and when I right click, photos will not appear. What the hell have I done?

  What browser you use.

  Is not the problem of your windows, it may be problem with your internet connection
  Sometimes, you can install software to filter and can block images
  If you are a firefox user, try
  • At the top of the Firefox window, click the Firefox (Tools menu in Windows XP), and then click Options.
  • Options window, select the content tab.
  • Make sure there is a check mark next to load images automatically click Exceptions... next to load images automatically to open the Exceptions - Images window.
  • The exceptions - Images window, look at the list of sites. Make sure that the sites with which you are having problems are not in the list. Click close to close the Exceptions - Images window.
  • Click OK to close the Options window.
  If you are a user of IE, try
  • On the Tools menu, click Internet Options.
  • Click the Advanced tab, and then verify that the show pictures check box is selected in underMultimedia.
  • Click OK.
  or try
  • On the Tools menu, click Internet Options.
  • Click the Security tab and then click level by default (if available) for the zone that contains the Web page (for example, Internet area).
  • If you use Internet Explorer 6, click the Privacy tab, and then click default (if available).

• My without wire is connected, but nothing of my browser reopens it displays the web page is not available

  My dell laptop shows that it is connected but nothing of my browser opens, it displays the web page is unavailable pls help me to solve this problem

  Hi shaikh_941,

  1. what brand & model of network card?

  2. were you able to use the wireless network connection before?

  3. are you able to use the wired connection on your computer?

  You can follow these links and check if it helps.

  In the Windows wireless network connection problems

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  For Internet Explorer, you can follow this link & check if it helps.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  Hope the helps of information.
  Please post back and we do know.

• can not find on the web page hp H470 bluetooth driver for win 8.1

  can not find on the web page hp H470 bluetooth driver for win 8.1

  Downloaded the full software, stops and States that the h470 is installed and no problems were discovered. only allows a test page to print when connected by usb. show / not allow an option to install the bluetooth drivers. If I remove the usb key indicates that the h470 is not discovered even if I have a bluetooth installed in the Pavilion and the h470

• Does not print unless I refresh the web page of the printer

  Photosmart Premium CN503A with iMac OS 10.7.2.  Driver deleted and reinstalled through system preferences > print and scan.  The printer made a kind of upgrade software wireless this week.  (However, the problem before this event).

  The printer, close the iMac and the router does not work for print orders.   The print queue log shows that the printer is connected, but the jobs do not print.  Finally, without printing, the connection returns to idle.  I can get the printer to answer by clicking printer setup > Show printer web page.   Stop the printer and I must refresh the web page several times before the printer has finally complete the work.

  I am very disappointed by this printer.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• How to load a web page with the Web page class

  Hello world

  I try my app to display the title and favico starting from a given url without showing the content of the Web page itself using the class bb::cascades:WebPage, but after the constructor method and setUrl, apparently not start the loading content and methods title() both icon give anything (or loading())

  Any idea on how to load the webpage using this class?

  void handleInvoke (const bb::system:InvokeRequest & request) {}

  Web page * bookmark = new WebPage();

  Bookmark-> setUrl (request.uri ());

  root->findChild ('message')-> setProperty ('text', QString (bookmark-> title()));

  }

  Thanks in advance

  Diego

  I have use the class Web page, but the documentation, it seems you should subscribe to the loadingChanged signal and wait for the download to complete. The download can begin asynchronously so loading() might return false immediately after the definition of the URL.

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__webpage.html#loadingchanged

• Question: CP9: color of the web page outside of the project area.

  CP9, HTML5, output only.

  Hello

  Question: How can I change the color of the web page outside of the project area?

  I want that my projects in 100% white as in example 1.

  I tried changing all kinds of options on the slide master and made sure that both projects have the same settings, but I still get a gray color as in example 2.

  (If the solution is to edit the index.html file or any other file I'm happy about it).

  Any help will be much appreciated.

  Thank you

  Peter.

  Example 1

  This project page is 100% white.

  

  Example 2

  This is another project, but the page outside of the project area is a very pale gray.

  

  Hi Peter,.

  You can change the color of the HTML box around the Captivate project from:

  1. in the menu bar, click themes and select the skin editor.

  2. in the skin Editor window, open the borders page (second means of icon on the left, under the name of skin).

  3. in the theme section, specify the background color of the HTML.

  This solves your question?

• I live in Colombia and I would buy the full suite in Colombian pesos creative, I try in the Web page and he makes me in USD. How can I buy it?

  I live in Colombia and I would buy the full suite in Colombian pesos creative, I try in the Web page and he makes me in USD. How can I buy it?

  They may also help:

  FAQ: Is creative cloud available in my country?

  FAQ: Why my purchase showing the wrong currency?

  FAQ: How can I view Adobe web pages in another language?

  FAQ: How can I change the country associated with my Adobe ID?

• Link on the Web page does not work in published HTML project

  I use 8.01 Captivate and created a project with a link to a URL of page web (I did by the insertion of the text links).  It works perfectly when I publish as an executable.

  Customer has requested that we publish now in the form of HTML/SWF file.  The link URL (set to open in a new window) does not this version.

  I changed the link at a click box with the action to open the web page in a new window.  Again, it works when you publish an executable file, but not when I publish to HTML.

  The OUTPUT of course links also do not work in the HTML version.

  We use IE11 to launch the HTML file.

  Any help will be greatly appreciated!

  Thank you!

  Hi Betty,.

  It seems to be a problem with the Flash security settings.

  Please follow the steps (these steps are for Firefox and IE) below:

  1. Publish the project to a folder on the c drive.
  2. Open the html of the published output.
  3. Do the right click on the screen and go to global settings.
  4. Go to the advance tab.
  5. Scroll down and click on trusted location settings.
  6. Click Add > add folder and navigate to your published folder and add it. (You can also add full lecteurC so that you don't have to do it again for all projects)
  7. Click on confirm and then close it.
  8. Now, re - open the html file and try to view attachments.

  These parameters are only made when you view the content locally. If you place the output on any server, then you must not make these settings.

  Hope it works... !

  Kind regards

  MILIN